This serie update the NVMEM BSEC driver to be compatible with STM32MP13x
SoC and the trusted application STM32MP BSEC in OP-TEE
This serie solve issue in initial support of STM32MP131
(using BSEC STM32MP15 compatible) and so it break the STM32MP13x DTS
compatible.
I create this serie for more efficient review, including support for
STM32MP15x.
The first patches of the V1 series is already merged:
"dt-bindings: nvmem: add new stm32mp13 compatible for stm32-romem"
This STM32MP13x DTS break is acceptable as
- the STM32MP13x SoC is not yet available outside STMicroelectronics
(not official)
- the same patch is already integrated or modifications are in progress in
the other users (arm-trusted-firmware/TF-A, OP-TEE and U-Boot) of
stm32mp131 device tree.
It is the good time to correct this issue before the real availability of
the SoC and before full support of STM32MP13x SoC in Linux kernel.
Regards
Patrick
Changes in v3:
- add a separate file stm32-bsec-optee-ta.c with STM32MP BSEC TA
communication functions to avoid #if in romem driver.
- use of_find_compatible_node in optee_presence_check function
instead of of_find_node_by_path("/firmware/optee")
Changes in v2:
- rebase series on linux-next/master
- minor update after V1 revue
Changes in v1:
- update commit message to indicate DTS break reason.
Patrick Delaunay (3):
ARM: dts: stm32mp13: fix compatible for BSEC
nvmem: stm32: add OP-TEE support for STM32MP13x
nvmem: stm32: detect bsec pta presence for STM32MP15x
arch/arm/boot/dts/stm32mp131.dtsi | 2 +-
drivers/nvmem/Kconfig | 11 +
drivers/nvmem/Makefile | 1 +
drivers/nvmem/stm32-bsec-optee-ta.c | 298 ++++++++++++++++++++++++++++
drivers/nvmem/stm32-bsec-optee-ta.h | 80 ++++++++
drivers/nvmem/stm32-romem.c | 84 +++++++-
6 files changed, 472 insertions(+), 4 deletions(-)
create mode 100644 drivers/nvmem/stm32-bsec-optee-ta.c
create mode 100644 drivers/nvmem/stm32-bsec-optee-ta.h
--
2.25.1
For boot with OP-TEE on STM32MP13, the communication with the secure
world no more use STMicroelectronics SMC but communication with the
STM32MP BSEC TA, for data access (read/write) or lock operation:
- all the request are sent to OP-TEE trusted application,
- for upper OTP with ECC protection and with word programming only
each OTP are permanently locked when programmed to avoid ECC error
on the second write operation
Signed-off-by: Patrick Delaunay <[email protected]>
---
Changes in v3:
- add a separate file stm32-bsec-optee-ta.c with STM32MP BSEC TA
communication functions to avoid #if in romem driver.
Changes in v2:
- rebase series on linux-next/master
- minor update after V1 revue
- add missing sentinel in stm32_romem_of_match()
- reorder function and remove prototypes for stm32_bsec_pta... functions
- change stm32_bsec_pta_find to static
- add return value in dev_err()
- cleanups some comments, which can be on one line
- remove test on priv->ctx in stm32_bsec_pta_remove
- add missing tee_shm_free(shm) in stm32_bsec_pta_write() when
tee_shm_get_va failed
- return error in stm32_bsec_pta_find when devm_add_action_or_reset failed
- handle driver_register error in stm32_romem_init
drivers/nvmem/Kconfig | 11 +
drivers/nvmem/Makefile | 1 +
drivers/nvmem/stm32-bsec-optee-ta.c | 298 ++++++++++++++++++++++++++++
drivers/nvmem/stm32-bsec-optee-ta.h | 80 ++++++++
drivers/nvmem/stm32-romem.c | 55 ++++-
5 files changed, 442 insertions(+), 3 deletions(-)
create mode 100644 drivers/nvmem/stm32-bsec-optee-ta.c
create mode 100644 drivers/nvmem/stm32-bsec-optee-ta.h
diff --git a/drivers/nvmem/Kconfig b/drivers/nvmem/Kconfig
index ec8a49c04003..607e7c4c087b 100644
--- a/drivers/nvmem/Kconfig
+++ b/drivers/nvmem/Kconfig
@@ -290,9 +290,20 @@ config NVMEM_SPRD_EFUSE
This driver can also be built as a module. If so, the module
will be called nvmem-sprd-efuse.
+config NVMEM_STM32_BSEC_OPTEE_TA
+ bool "STM32MP BSEC OP-TEE TA support for nvmem-stm32-romem driver"
+ depends on OPTEE
+ help
+ Say y here to enable the accesses to STM32MP SoC OTPs by the OP-TEE
+ trusted application STM32MP BSEC.
+
+ This library is a used by stm32-romem driver or included in the module
+ called nvmem-stm32-romem.
+
config NVMEM_STM32_ROMEM
tristate "STMicroelectronics STM32 factory-programmed memory support"
depends on ARCH_STM32 || COMPILE_TEST
+ imply NVMEM_STM32_BSEC_OPTEE_TA
help
Say y here to enable read-only access for STMicroelectronics STM32
factory-programmed memory area.
diff --git a/drivers/nvmem/Makefile b/drivers/nvmem/Makefile
index fa80fe17e567..6a1efffa88f0 100644
--- a/drivers/nvmem/Makefile
+++ b/drivers/nvmem/Makefile
@@ -61,6 +61,7 @@ obj-$(CONFIG_NVMEM_SPRD_EFUSE) += nvmem_sprd_efuse.o
nvmem_sprd_efuse-y := sprd-efuse.o
obj-$(CONFIG_NVMEM_STM32_ROMEM) += nvmem_stm32_romem.o
nvmem_stm32_romem-y := stm32-romem.o
+nvmem_stm32_romem-$(CONFIG_NVMEM_STM32_BSEC_OPTEE_TA) += stm32-bsec-optee-ta.o
obj-$(CONFIG_NVMEM_SUNPLUS_OCOTP) += nvmem_sunplus_ocotp.o
nvmem_sunplus_ocotp-y := sunplus-ocotp.o
obj-$(CONFIG_NVMEM_SUNXI_SID) += nvmem_sunxi_sid.o
diff --git a/drivers/nvmem/stm32-bsec-optee-ta.c b/drivers/nvmem/stm32-bsec-optee-ta.c
new file mode 100644
index 000000000000..cddcf9cb51d4
--- /dev/null
+++ b/drivers/nvmem/stm32-bsec-optee-ta.c
@@ -0,0 +1,298 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * OP-TEE STM32MP BSEC PTA interface, used by STM32 ROMEM driver
+ *
+ * Copyright (C) 2022, STMicroelectronics - All Rights Reserved
+ */
+
+#include <linux/tee_drv.h>
+
+#include "stm32-bsec-optee-ta.h"
+
+/*
+ * Read OTP memory
+ *
+ * [in] value[0].a OTP start offset in byte
+ * [in] value[0].b Access type (0:shadow, 1:fuse, 2:lock)
+ * [out] memref[1].buffer Output buffer to store read values
+ * [out] memref[1].size Size of OTP to be read
+ *
+ * Return codes:
+ * TEE_SUCCESS - Invoke command success
+ * TEE_ERROR_BAD_PARAMETERS - Incorrect input param
+ */
+#define PTA_BSEC_READ_MEM 0x0 /* Read OTP */
+
+/*
+ * Write OTP memory
+ *
+ * [in] value[0].a OTP start offset in byte
+ * [in] value[0].b Access type (0:shadow, 1:fuse, 2:lock)
+ * [in] memref[1].buffer Input buffer to read values
+ * [in] memref[1].size Size of OTP to be written
+ *
+ * Return codes:
+ * TEE_SUCCESS - Invoke command success
+ * TEE_ERROR_BAD_PARAMETERS - Incorrect input param
+ */
+#define PTA_BSEC_WRITE_MEM 0x1 /* Write OTP */
+
+/* value of PTA_BSEC access type = value[in] b */
+#define SHADOW_ACCESS 0
+#define FUSE_ACCESS 1
+#define LOCK_ACCESS 2
+
+/* Bitfield definition for LOCK status */
+#define LOCK_PERM BIT(30)
+
+/* OP-TEE STM32MP BSEC TA UUID */
+static const uuid_t stm32mp_bsec_ta_uuid =
+ UUID_INIT(0x94cf71ad, 0x80e6, 0x40b5,
+ 0xa7, 0xc6, 0x3d, 0xc5, 0x01, 0xeb, 0x28, 0x03);
+
+/*
+ * Check whether this driver supports the BSEC TA in the TEE instance
+ * represented by the params (ver/data) to this function.
+ */
+static int stm32_bsec_optee_ta_match(struct tee_ioctl_version_data *ver,
+ const void *data)
+{
+ /* Currently this driver only supports GP compliant, OP-TEE based TA */
+ if ((ver->impl_id == TEE_IMPL_ID_OPTEE) &&
+ (ver->gen_caps & TEE_GEN_CAP_GP))
+ return 1;
+ else
+ return 0;
+}
+
+/* Open a session to OP-TEE for STM32MP BSEC TA */
+static int stm32_bsec_ta_open_session(struct tee_context *ctx, u32 *id)
+{
+ struct tee_ioctl_open_session_arg sess_arg;
+ int rc;
+
+ memset(&sess_arg, 0, sizeof(sess_arg));
+ export_uuid(sess_arg.uuid, &stm32mp_bsec_ta_uuid);
+ sess_arg.clnt_login = TEE_IOCTL_LOGIN_REE_KERNEL;
+ sess_arg.num_params = 0;
+
+ rc = tee_client_open_session(ctx, &sess_arg, NULL);
+ if ((rc < 0) || (sess_arg.ret != 0)) {
+ pr_err("%s: tee_client_open_session failed err:%x, ret:%x\n",
+ __func__, sess_arg.ret, rc);
+ if (!rc)
+ rc = -EINVAL;
+ } else {
+ *id = sess_arg.session;
+ }
+
+ return rc;
+}
+
+/* close a session to OP-TEE for STM32MP BSEC TA */
+static void stm32_bsec_ta_close_session(void *ctx, u32 id)
+{
+ tee_client_close_session(ctx, id);
+}
+
+/* stm32_bsec_optee_ta_open() - initialize the STM32MP BSEC TA */
+int stm32_bsec_optee_ta_open(struct tee_context **ctx)
+{
+ struct tee_context *tee_ctx;
+ u32 session_id;
+ int rc;
+
+ /* Open context with TEE driver */
+ tee_ctx = tee_client_open_context(NULL, stm32_bsec_optee_ta_match, NULL, NULL);
+ if (IS_ERR(tee_ctx)) {
+ rc = PTR_ERR(tee_ctx);
+ if (rc == -ENOENT)
+ return -EPROBE_DEFER;
+ pr_err("%s: tee_client_open_context failed (%d)\n", __func__, rc);
+
+ return rc;
+ }
+
+ /* Check STM32MP BASEC TA presence */
+ rc = stm32_bsec_ta_open_session(tee_ctx, &session_id);
+ if (rc)
+ goto out_tee_session;
+ stm32_bsec_ta_close_session(tee_ctx, session_id);
+
+ *ctx = tee_ctx;
+
+ return 0;
+
+out_tee_session:
+ tee_client_close_context(tee_ctx);
+
+ return rc;
+}
+
+/* stm32_bsec_optee_ta_open() - release the PTA STM32MP BSEC TA */
+void stm32_bsec_optee_ta_close(void *ctx)
+{
+ tee_client_close_context(ctx);
+}
+
+/* stm32_bsec_optee_ta_read() - nvmem read access using PTA client driver */
+int stm32_bsec_optee_ta_read(struct tee_context *ctx, unsigned int offset,
+ void *buf, size_t bytes)
+{
+ struct tee_shm *shm;
+ struct tee_ioctl_invoke_arg arg;
+ struct tee_param param[2];
+ u8 *shm_buf;
+ u32 start, num_bytes;
+ int ret;
+ u32 session_id;
+
+ ret = stm32_bsec_ta_open_session(ctx, &session_id);
+ if (ret)
+ return ret;
+
+ memset(&arg, 0, sizeof(arg));
+ memset(¶m, 0, sizeof(param));
+
+ arg.func = PTA_BSEC_READ_MEM;
+ arg.session = session_id;
+ arg.num_params = 2;
+
+ /* align access on 32bits */
+ start = ALIGN_DOWN(offset, 4);
+ num_bytes = round_up(offset + bytes - start, 4);
+ param[0].attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INPUT;
+ param[0].u.value.a = start;
+ param[0].u.value.b = SHADOW_ACCESS;
+
+ shm = tee_shm_alloc_kernel_buf(ctx, num_bytes);
+ if (IS_ERR(shm)) {
+ ret = PTR_ERR(shm);
+ goto out_tee_session;
+ }
+
+ param[1].attr = TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_OUTPUT;
+ param[1].u.memref.shm = shm;
+ param[1].u.memref.size = num_bytes;
+
+ ret = tee_client_invoke_func(ctx, &arg, param);
+ if (ret < 0 || arg.ret != 0) {
+ pr_err("TA_BSEC invoke failed TEE err:%x, ret:%x\n",
+ arg.ret, ret);
+ if (!ret)
+ ret = -EIO;
+ }
+ if (!ret) {
+ shm_buf = tee_shm_get_va(shm, 0);
+ if (IS_ERR(shm_buf)) {
+ ret = PTR_ERR(shm_buf);
+ pr_err("tee_shm_get_va failed for transmit (%d)\n", ret);
+ } else {
+ /* read data from 32 bits aligned buffer */
+ memcpy(buf, &shm_buf[offset % 4], bytes);
+ }
+ }
+
+ tee_shm_free(shm);
+
+out_tee_session:
+ stm32_bsec_ta_close_session(ctx, session_id);
+
+ return ret;
+}
+
+/* stm32_bsec_optee_ta_write() - nvmem write access using PTA client driver */
+int stm32_bsec_optee_ta_write(struct tee_context *ctx, unsigned int lower,
+ unsigned int offset, void *buf, size_t bytes)
+{ struct tee_shm *shm;
+ struct tee_ioctl_invoke_arg arg;
+ struct tee_param param[2];
+ u8 *shm_buf;
+ int ret;
+ u32 session_id;
+
+ ret = stm32_bsec_ta_open_session(ctx, &session_id);
+ if (ret)
+ return ret;
+
+ /* Allow only writing complete 32-bits aligned words */
+ if ((bytes % 4) || (offset % 4))
+ return -EINVAL;
+
+ memset(&arg, 0, sizeof(arg));
+ memset(¶m, 0, sizeof(param));
+
+ arg.func = PTA_BSEC_WRITE_MEM;
+ arg.session = session_id;
+ arg.num_params = 2;
+
+ param[0].attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INPUT;
+ param[0].u.value.a = offset;
+ param[0].u.value.b = FUSE_ACCESS;
+
+ shm = tee_shm_alloc_kernel_buf(ctx, bytes);
+ if (IS_ERR(shm)) {
+ ret = PTR_ERR(shm);
+ goto out_tee_session;
+ }
+
+ param[1].attr = TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_INPUT;
+ param[1].u.memref.shm = shm;
+ param[1].u.memref.size = bytes;
+
+ shm_buf = tee_shm_get_va(shm, 0);
+ if (IS_ERR(shm_buf)) {
+ ret = PTR_ERR(shm_buf);
+ pr_err("tee_shm_get_va failed for transmit (%d)\n", ret);
+ tee_shm_free(shm);
+
+ goto out_tee_session;
+ }
+
+ memcpy(shm_buf, buf, bytes);
+
+ ret = tee_client_invoke_func(ctx, &arg, param);
+ if (ret < 0 || arg.ret != 0) {
+ pr_err("TA_BSEC invoke failed TEE err:%x, ret:%x\n", arg.ret, ret);
+ if (!ret)
+ ret = -EIO;
+ }
+ pr_debug("Write OTPs %d to %d, ret=%d\n", offset / 4, (offset + bytes) / 4, ret);
+
+ /* Lock the upper OTPs with ECC protection, word programming only */
+ if (!ret && ((offset + bytes) >= (lower * 4))) {
+ u32 start, nb_lock;
+ u32 *lock = (u32 *)shm_buf;
+ int i;
+
+ /*
+ * don't lock the lower OTPs, no ECC protection and incremental
+ * bit programming, a second write is allowed
+ */
+ start = max_t(u32, offset, lower * 4);
+ nb_lock = (offset + bytes - start) / 4;
+
+ param[0].u.value.a = start;
+ param[0].u.value.b = LOCK_ACCESS;
+ param[1].u.memref.size = nb_lock * 4;
+
+ for (i = 0; i < nb_lock; i++)
+ lock[i] = LOCK_PERM;
+
+ ret = tee_client_invoke_func(ctx, &arg, param);
+ if (ret < 0 || arg.ret != 0) {
+ pr_err("TA_BSEC invoke failed TEE err:%x, ret:%x\n", arg.ret, ret);
+ if (!ret)
+ ret = -EIO;
+ }
+ pr_debug("Lock upper OTPs %d to %d, ret=%d\n",
+ start / 4, start / 4 + nb_lock, ret);
+ }
+
+ tee_shm_free(shm);
+
+out_tee_session:
+ stm32_bsec_ta_close_session(ctx, session_id);
+
+ return ret;
+}
diff --git a/drivers/nvmem/stm32-bsec-optee-ta.h b/drivers/nvmem/stm32-bsec-optee-ta.h
new file mode 100644
index 000000000000..3966a0535179
--- /dev/null
+++ b/drivers/nvmem/stm32-bsec-optee-ta.h
@@ -0,0 +1,80 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * OP-TEE STM32MP BSEC PTA interface, used by STM32 ROMEM driver
+ *
+ * Copyright (C) 2022, STMicroelectronics - All Rights Reserved
+ */
+
+#if IS_ENABLED(CONFIG_NVMEM_STM32_BSEC_OPTEE_TA)
+/**
+ * stm32_bsec_optee_ta_open() - initialize the STM32 BSEC TA
+ * @ctx: the OP-TEE context on success
+ *
+ * Return:
+ * On success, 0. On failure, -errno.
+ */
+int stm32_bsec_optee_ta_open(struct tee_context **ctx);
+
+/**
+ * stm32_bsec_optee_ta_close() - release the STM32 BSEC TA
+ * @ctx: the OP-TEE context
+ *
+ * This function used to clean the OP-TEE resources initialized in
+ * stm32_bsec_optee_ta_open(); it can be used as callback to
+ * devm_add_action_or_reset()
+ */
+void stm32_bsec_optee_ta_close(void *ctx);
+
+/**
+ * stm32_bsec_optee_ta_read() - nvmem read access using TA client driver
+ * @ctx: the OP-TEE context provided by stm32_bsec_optee_ta_open
+ * @offset: nvmem offset
+ * @buf: buffer to fill with nvem values
+ * @bytes: number of bytes to read
+ *
+ * Return:
+ * On success, 0. On failure, -errno.
+ */
+int stm32_bsec_optee_ta_read(struct tee_context *ctx, unsigned int offset,
+ void *buf, size_t bytes);
+
+/**
+ * stm32_bsec_optee_ta_write() - nvmem write access using TA client driver
+ * @ctx: the OP-TEE context provided by stm32_bsec_optee_ta_open
+ * @lower: number of lower OTP, not protected by ECC
+ * @offset: nvmem offset
+ * @buf: buffer with nvem values
+ * @bytes: number of bytes to write
+ *
+ * Return:
+ * On success, 0. On failure, -errno.
+ */
+int stm32_bsec_optee_ta_write(struct tee_context *ctx, unsigned int lower,
+ unsigned int offset, void *buf, size_t bytes);
+
+#else
+
+static inline int stm32_bsec_optee_ta_open(struct tee_context **ctx)
+{
+ return -EOPNOTSUPP;
+}
+
+static inline void stm32_bsec_optee_ta_close(void *ctx)
+{
+}
+
+static inline int stm32_bsec_optee_ta_read(struct tee_context *ctx,
+ unsigned int offset, void *buf,
+ size_t bytes)
+{
+ return -EOPNOTSUPP;
+}
+
+static inline int stm32_bsec_optee_ta_write(struct tee_context *ctx,
+ unsigned int lower,
+ unsigned int offset, void *buf,
+ size_t bytes)
+{
+ return -EOPNOTSUPP;
+}
+#endif /* CONFIG_NVMEM_STM32_BSEC_OPTEE_TA */
diff --git a/drivers/nvmem/stm32-romem.c b/drivers/nvmem/stm32-romem.c
index d1d03c2ad081..e2fb3eb747dd 100644
--- a/drivers/nvmem/stm32-romem.c
+++ b/drivers/nvmem/stm32-romem.c
@@ -11,6 +11,9 @@
#include <linux/module.h>
#include <linux/nvmem-provider.h>
#include <linux/of_device.h>
+#include <linux/tee_drv.h>
+
+#include "stm32-bsec-optee-ta.h"
/* BSEC secure service access from non-secure */
#define STM32_SMC_BSEC 0x82001003
@@ -25,12 +28,14 @@
struct stm32_romem_cfg {
int size;
u8 lower;
+ bool ta;
};
struct stm32_romem_priv {
void __iomem *base;
struct nvmem_config cfg;
u8 lower;
+ struct tee_context *ctx;
};
static int stm32_romem_read(void *context, unsigned int offset, void *buf,
@@ -138,12 +143,29 @@ static int stm32_bsec_write(void *context, unsigned int offset, void *buf,
return 0;
}
+static int stm32_bsec_pta_read(void *context, unsigned int offset, void *buf,
+ size_t bytes)
+{
+ struct stm32_romem_priv *priv = context;
+
+ return stm32_bsec_optee_ta_read(priv->ctx, offset, buf, bytes);
+}
+
+static int stm32_bsec_pta_write(void *context, unsigned int offset, void *buf,
+ size_t bytes)
+{
+ struct stm32_romem_priv *priv = context;
+
+ return stm32_bsec_optee_ta_write(priv->ctx, priv->lower, offset, buf, bytes);
+}
+
static int stm32_romem_probe(struct platform_device *pdev)
{
const struct stm32_romem_cfg *cfg;
struct device *dev = &pdev->dev;
struct stm32_romem_priv *priv;
struct resource *res;
+ int rc;
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
@@ -173,15 +195,31 @@ static int stm32_romem_probe(struct platform_device *pdev)
} else {
priv->cfg.size = cfg->size;
priv->lower = cfg->lower;
- priv->cfg.reg_read = stm32_bsec_read;
- priv->cfg.reg_write = stm32_bsec_write;
+ if (cfg->ta) {
+ rc = stm32_bsec_optee_ta_open(&priv->ctx);
+ /* wait for OP-TEE client driver to be up and ready */
+ if (rc)
+ return rc;
+ rc = devm_add_action_or_reset(dev, stm32_bsec_optee_ta_close, priv->ctx);
+ if (rc) {
+ dev_err(dev, "devm_add_action_or_reset() failed (%d)\n", rc);
+ return rc;
+ }
+ }
+ if (priv->ctx) {
+ priv->cfg.reg_read = stm32_bsec_pta_read;
+ priv->cfg.reg_write = stm32_bsec_pta_write;
+ } else {
+ priv->cfg.reg_read = stm32_bsec_read;
+ priv->cfg.reg_write = stm32_bsec_write;
+ }
}
return PTR_ERR_OR_ZERO(devm_nvmem_register(dev, &priv->cfg));
}
/*
- * STM32MP15 BSEC OTP regions: 4096 OTP bits (with 3072 effective bits)
+ * STM32MP15/13 BSEC OTP regions: 4096 OTP bits (with 3072 effective bits)
* => 96 x 32-bits data words
* - Lower: 1K bits, 2:1 redundancy, incremental bit programming
* => 32 (x 32-bits) lower shadow registers = words 0 to 31
@@ -191,6 +229,13 @@ static int stm32_romem_probe(struct platform_device *pdev)
static const struct stm32_romem_cfg stm32mp15_bsec_cfg = {
.size = 384,
.lower = 32,
+ .ta = false,
+};
+
+static const struct stm32_romem_cfg stm32mp13_bsec_cfg = {
+ .size = 384,
+ .lower = 32,
+ .ta = true,
};
static const struct of_device_id stm32_romem_of_match[] = {
@@ -198,7 +243,10 @@ static const struct of_device_id stm32_romem_of_match[] = {
.compatible = "st,stm32mp15-bsec",
.data = (void *)&stm32mp15_bsec_cfg,
}, {
+ .compatible = "st,stm32mp13-bsec",
+ .data = (void *)&stm32mp13_bsec_cfg,
},
+ { /* sentinel */ },
};
MODULE_DEVICE_TABLE(of, stm32_romem_of_match);
@@ -209,6 +257,7 @@ static struct platform_driver stm32_romem_driver = {
.of_match_table = of_match_ptr(stm32_romem_of_match),
},
};
+
module_platform_driver(stm32_romem_driver);
MODULE_AUTHOR("Fabrice Gasnier <[email protected]>");
--
2.25.1
Use the correct compatible for stm32mp13 support.
The BSEC driver for STM32MP15x is not compatible with STM32MP13x. For
example the proprietary's smc STM32_SMC_BSEC is not supported in
STM32MP13x OP-TEE, it is replaced by SM32MP BSEC Pseudo Trusted
Application in OP-TEE to access to the secured IP BSEC on STM32MP13X SoC.
The correct compatible is already used in U-Boot and in upstream is in
progress for OP-TEE device tree.
As the SoC STM32MP13X is not yet official and it is not available
outside STMicroelectronics, it is the good time to break the DTS
compatibility and to correct the error done in the introduction of
STM32MP131.
Signed-off-by: Patrick Delaunay <[email protected]>
---
This patch is already sent separately in:
https://lore.kernel.org/all/20221017134437.1.I167a5efc1f8777cce14518c6fa38400ac684de3e@changeid/
https://patchwork.kernel.org/project/linux-arm-kernel/list/?series=685815
I create a serie for more efficient review.
Patrick.
(no changes since v1)
Changes in v1:
- update commit message to indicate DTS break reason.
arch/arm/boot/dts/stm32mp131.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/stm32mp131.dtsi b/arch/arm/boot/dts/stm32mp131.dtsi
index 2a9b3a5bba83..f034cbe0d5b2 100644
--- a/arch/arm/boot/dts/stm32mp131.dtsi
+++ b/arch/arm/boot/dts/stm32mp131.dtsi
@@ -522,7 +522,7 @@ rtc: rtc@5c004000 {
};
bsec: efuse@5c005000 {
- compatible = "st,stm32mp15-bsec";
+ compatible = "st,stm32mp13-bsec";
reg = <0x5c005000 0x400>;
#address-cells = <1>;
#size-cells = <1>;
--
2.25.1