This adds support for the 256-byte internal RAM. There are two windows
which can be used to access this RAM: 64 bytes at 0x40 (the "standard"
address space) and 128 bytes at 0x80 (the "alternate" address space). We
use the standard address space because it is also accessible over SPI
(if such a port is ever done). We are limited to 32-byte reads for SMBus
compatibility, so there's no advantage to using the alternate address
space.
There are some reserved bits in the EXTRAM register, and the datasheet
doesn't say what to do with them. I've opted to skip a read/modify/write
and just write the whole thing. If this driver is ever converted to
regmap, this would be a good place to use regmap_update_bits.
Signed-off-by: Sean Anderson <[email protected]>
---
Changes in v4:
- Remove unused variable
Changes in v3:
- Use devm_rtc_nvmem_register
- Remove ifdefs
Changes in v2:
- Fix building on non-arm platforms
drivers/rtc/rtc-abx80x.c | 77 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 77 insertions(+)
diff --git a/drivers/rtc/rtc-abx80x.c b/drivers/rtc/rtc-abx80x.c
index 9b0138d07232..74ff820f5481 100644
--- a/drivers/rtc/rtc-abx80x.c
+++ b/drivers/rtc/rtc-abx80x.c
@@ -11,6 +11,7 @@
*/
#include <linux/bcd.h>
+#include <linux/bitfield.h>
#include <linux/i2c.h>
#include <linux/module.h>
#include <linux/of_device.h>
@@ -87,6 +88,16 @@
#define ABX8XX_TRICKLE_STANDARD_DIODE 0x8
#define ABX8XX_TRICKLE_SCHOTTKY_DIODE 0x4
+#define ABX8XX_REG_EXTRAM 0x3f
+#define ABX8XX_EXTRAM_XADS GENMASK(1, 0)
+
+#define ABX8XX_SRAM_BASE 0x40
+#define ABX8XX_SRAM_WIN_SIZE 0x40
+#define ABX8XX_RAM_SIZE 256
+
+#define NVMEM_ADDR_LOWER GENMASK(5, 0)
+#define NVMEM_ADDR_UPPER GENMASK(7, 6)
+
static u8 trickle_resistors[] = {0, 3, 6, 11};
enum abx80x_chip {AB0801, AB0803, AB0804, AB0805,
@@ -673,6 +684,68 @@ static int abx80x_setup_watchdog(struct abx80x_priv *priv)
}
#endif
+static int abx80x_nvmem_xfer(struct abx80x_priv *priv, unsigned int offset,
+ void *val, size_t bytes, bool write)
+{
+ int ret;
+
+ while (bytes) {
+ u8 extram, reg, len, lower, upper;
+
+ lower = FIELD_GET(NVMEM_ADDR_LOWER, offset);
+ upper = FIELD_GET(NVMEM_ADDR_UPPER, offset);
+ extram = FIELD_PREP(ABX8XX_EXTRAM_XADS, upper);
+ reg = ABX8XX_SRAM_BASE + lower;
+ len = min(lower + bytes, (size_t)ABX8XX_SRAM_WIN_SIZE) - lower;
+ len = min_t(u8, len, I2C_SMBUS_BLOCK_MAX);
+
+ ret = i2c_smbus_write_byte_data(priv->client, ABX8XX_REG_EXTRAM,
+ extram);
+ if (ret)
+ return ret;
+
+ if (write)
+ ret = i2c_smbus_write_i2c_block_data(priv->client, reg,
+ len, val);
+ else
+ ret = i2c_smbus_read_i2c_block_data(priv->client, reg,
+ len, val);
+ if (ret)
+ return ret;
+
+ offset += len;
+ val += len;
+ bytes -= len;
+ }
+
+ return 0;
+}
+
+static int abx80x_nvmem_read(void *priv, unsigned int offset, void *val,
+ size_t bytes)
+{
+ return abx80x_nvmem_xfer(priv, offset, val, bytes, false);
+}
+
+static int abx80x_nvmem_write(void *priv, unsigned int offset, void *val,
+ size_t bytes)
+{
+ return abx80x_nvmem_xfer(priv, offset, val, bytes, true);
+}
+
+static int abx80x_setup_nvmem(struct abx80x_priv *priv)
+{
+ struct nvmem_config config = {
+ .type = NVMEM_TYPE_BATTERY_BACKED,
+ .reg_read = abx80x_nvmem_read,
+ .reg_write = abx80x_nvmem_write,
+ .size = ABX8XX_RAM_SIZE,
+ .priv = priv,
+ };
+
+ return devm_rtc_nvmem_register(priv->rtc, &config);
+}
+
static int abx80x_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
@@ -824,6 +897,10 @@ static int abx80x_probe(struct i2c_client *client,
return err;
}
+ err = abx80x_setup_nvmem(priv);
+ if (err)
+ return err;
+
if (client->irq > 0) {
dev_info(&client->dev, "IRQ %d supplied\n", client->irq);
err = devm_request_threaded_irq(&client->dev, client->irq, NULL,
--
2.35.1.1320.gc452695387.dirty
On 12/22/22 16:45, Sean Anderson wrote:
> This adds support for the 256-byte internal RAM. There are two windows
> which can be used to access this RAM: 64 bytes at 0x40 (the "standard"
> address space) and 128 bytes at 0x80 (the "alternate" address space). We
> use the standard address space because it is also accessible over SPI
> (if such a port is ever done). We are limited to 32-byte reads for SMBus
> compatibility, so there's no advantage to using the alternate address
> space.
>
> There are some reserved bits in the EXTRAM register, and the datasheet
> doesn't say what to do with them. I've opted to skip a read/modify/write
> and just write the whole thing. If this driver is ever converted to
> regmap, this would be a good place to use regmap_update_bits.
>
> Signed-off-by: Sean Anderson <[email protected]>
> ---
>
> Changes in v4:
> - Remove unused variable
>
> Changes in v3:
> - Use devm_rtc_nvmem_register
> - Remove ifdefs
>
> Changes in v2:
> - Fix building on non-arm platforms
>
> drivers/rtc/rtc-abx80x.c | 77 ++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 77 insertions(+)
>
> diff --git a/drivers/rtc/rtc-abx80x.c b/drivers/rtc/rtc-abx80x.c
> index 9b0138d07232..74ff820f5481 100644
> --- a/drivers/rtc/rtc-abx80x.c
> +++ b/drivers/rtc/rtc-abx80x.c
> @@ -11,6 +11,7 @@
> */
>
> #include <linux/bcd.h>
> +#include <linux/bitfield.h>
> #include <linux/i2c.h>
> #include <linux/module.h>
> #include <linux/of_device.h>
> @@ -87,6 +88,16 @@
> #define ABX8XX_TRICKLE_STANDARD_DIODE 0x8
> #define ABX8XX_TRICKLE_SCHOTTKY_DIODE 0x4
>
> +#define ABX8XX_REG_EXTRAM 0x3f
> +#define ABX8XX_EXTRAM_XADS GENMASK(1, 0)
> +
> +#define ABX8XX_SRAM_BASE 0x40
> +#define ABX8XX_SRAM_WIN_SIZE 0x40
> +#define ABX8XX_RAM_SIZE 256
> +
> +#define NVMEM_ADDR_LOWER GENMASK(5, 0)
> +#define NVMEM_ADDR_UPPER GENMASK(7, 6)
> +
> static u8 trickle_resistors[] = {0, 3, 6, 11};
>
> enum abx80x_chip {AB0801, AB0803, AB0804, AB0805,
> @@ -673,6 +684,68 @@ static int abx80x_setup_watchdog(struct abx80x_priv *priv)
> }
> #endif
>
> +static int abx80x_nvmem_xfer(struct abx80x_priv *priv, unsigned int offset,
> + void *val, size_t bytes, bool write)
> +{
> + int ret;
> +
> + while (bytes) {
> + u8 extram, reg, len, lower, upper;
> +
> + lower = FIELD_GET(NVMEM_ADDR_LOWER, offset);
> + upper = FIELD_GET(NVMEM_ADDR_UPPER, offset);
> + extram = FIELD_PREP(ABX8XX_EXTRAM_XADS, upper);
> + reg = ABX8XX_SRAM_BASE + lower;
> + len = min(lower + bytes, (size_t)ABX8XX_SRAM_WIN_SIZE) - lower;
> + len = min_t(u8, len, I2C_SMBUS_BLOCK_MAX);
> +
> + ret = i2c_smbus_write_byte_data(priv->client, ABX8XX_REG_EXTRAM,
> + extram);
> + if (ret)
> + return ret;
> +
> + if (write)
> + ret = i2c_smbus_write_i2c_block_data(priv->client, reg,
> + len, val);
> + else
> + ret = i2c_smbus_read_i2c_block_data(priv->client, reg,
> + len, val);
> + if (ret)
> + return ret;
> +
> + offset += len;
> + val += len;
> + bytes -= len;
> + }
> +
> + return 0;
> +}
> +
> +static int abx80x_nvmem_read(void *priv, unsigned int offset, void *val,
> + size_t bytes)
> +{
> + return abx80x_nvmem_xfer(priv, offset, val, bytes, false);
> +}
> +
> +static int abx80x_nvmem_write(void *priv, unsigned int offset, void *val,
> + size_t bytes)
> +{
> + return abx80x_nvmem_xfer(priv, offset, val, bytes, true);
> +}
> +
> +static int abx80x_setup_nvmem(struct abx80x_priv *priv)
> +{
> + struct nvmem_config config = {
> + .type = NVMEM_TYPE_BATTERY_BACKED,
> + .reg_read = abx80x_nvmem_read,
> + .reg_write = abx80x_nvmem_write,
> + .size = ABX8XX_RAM_SIZE,
> + .priv = priv,
> + };
> +
> + return devm_rtc_nvmem_register(priv->rtc, &config);
> +}
> +
> static int abx80x_probe(struct i2c_client *client,
> const struct i2c_device_id *id)
> {
> @@ -824,6 +897,10 @@ static int abx80x_probe(struct i2c_client *client,
> return err;
> }
>
> + err = abx80x_setup_nvmem(priv);
> + if (err)
> + return err;
> +
> if (client->irq > 0) {
> dev_info(&client->dev, "IRQ %d supplied\n", client->irq);
> err = devm_request_threaded_irq(&client->dev, client->irq, NULL,
ping?
On 13/03/2023 11:28:30-0400, Sean Anderson wrote:
> On 12/22/22 16:45, Sean Anderson wrote:
> > This adds support for the 256-byte internal RAM. There are two windows
> > which can be used to access this RAM: 64 bytes at 0x40 (the "standard"
> > address space) and 128 bytes at 0x80 (the "alternate" address space). We
> > use the standard address space because it is also accessible over SPI
> > (if such a port is ever done). We are limited to 32-byte reads for SMBus
> > compatibility, so there's no advantage to using the alternate address
> > space.
> >
> > There are some reserved bits in the EXTRAM register, and the datasheet
> > doesn't say what to do with them. I've opted to skip a read/modify/write
> > and just write the whole thing. If this driver is ever converted to
> > regmap, this would be a good place to use regmap_update_bits.
> >
> > Signed-off-by: Sean Anderson <[email protected]>
> > ---
> >
> > Changes in v4:
> > - Remove unused variable
> >
> > Changes in v3:
> > - Use devm_rtc_nvmem_register
> > - Remove ifdefs
> >
> > Changes in v2:
> > - Fix building on non-arm platforms
> >
> > drivers/rtc/rtc-abx80x.c | 77 ++++++++++++++++++++++++++++++++++++++++
> > 1 file changed, 77 insertions(+)
> >
> > diff --git a/drivers/rtc/rtc-abx80x.c b/drivers/rtc/rtc-abx80x.c
> > index 9b0138d07232..74ff820f5481 100644
> > --- a/drivers/rtc/rtc-abx80x.c
> > +++ b/drivers/rtc/rtc-abx80x.c
> > @@ -11,6 +11,7 @@
> > */
> >
> > #include <linux/bcd.h>
> > +#include <linux/bitfield.h>
> > #include <linux/i2c.h>
> > #include <linux/module.h>
> > #include <linux/of_device.h>
> > @@ -87,6 +88,16 @@
> > #define ABX8XX_TRICKLE_STANDARD_DIODE 0x8
> > #define ABX8XX_TRICKLE_SCHOTTKY_DIODE 0x4
> >
> > +#define ABX8XX_REG_EXTRAM 0x3f
> > +#define ABX8XX_EXTRAM_XADS GENMASK(1, 0)
> > +
> > +#define ABX8XX_SRAM_BASE 0x40
> > +#define ABX8XX_SRAM_WIN_SIZE 0x40
> > +#define ABX8XX_RAM_SIZE 256
> > +
> > +#define NVMEM_ADDR_LOWER GENMASK(5, 0)
> > +#define NVMEM_ADDR_UPPER GENMASK(7, 6)
> > +
> > static u8 trickle_resistors[] = {0, 3, 6, 11};
> >
> > enum abx80x_chip {AB0801, AB0803, AB0804, AB0805,
> > @@ -673,6 +684,68 @@ static int abx80x_setup_watchdog(struct abx80x_priv *priv)
> > }
> > #endif
> >
> > +static int abx80x_nvmem_xfer(struct abx80x_priv *priv, unsigned int offset,
> > + void *val, size_t bytes, bool write)
> > +{
> > + int ret;
> > +
> > + while (bytes) {
> > + u8 extram, reg, len, lower, upper;
> > +
> > + lower = FIELD_GET(NVMEM_ADDR_LOWER, offset);
> > + upper = FIELD_GET(NVMEM_ADDR_UPPER, offset);
> > + extram = FIELD_PREP(ABX8XX_EXTRAM_XADS, upper);
> > + reg = ABX8XX_SRAM_BASE + lower;
> > + len = min(lower + bytes, (size_t)ABX8XX_SRAM_WIN_SIZE) - lower;
> > + len = min_t(u8, len, I2C_SMBUS_BLOCK_MAX);
> > +
> > + ret = i2c_smbus_write_byte_data(priv->client, ABX8XX_REG_EXTRAM,
> > + extram);
> > + if (ret)
> > + return ret;
> > +
> > + if (write)
> > + ret = i2c_smbus_write_i2c_block_data(priv->client, reg,
> > + len, val);
> > + else
> > + ret = i2c_smbus_read_i2c_block_data(priv->client, reg,
> > + len, val);
> > + if (ret)
> > + return ret;
> > +
> > + offset += len;
> > + val += len;
> > + bytes -= len;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static int abx80x_nvmem_read(void *priv, unsigned int offset, void *val,
> > + size_t bytes)
> > +{
> > + return abx80x_nvmem_xfer(priv, offset, val, bytes, false);
> > +}
> > +
> > +static int abx80x_nvmem_write(void *priv, unsigned int offset, void *val,
> > + size_t bytes)
> > +{
> > + return abx80x_nvmem_xfer(priv, offset, val, bytes, true);
> > +}
> > +
> > +static int abx80x_setup_nvmem(struct abx80x_priv *priv)
> > +{
> > + struct nvmem_config config = {
> > + .type = NVMEM_TYPE_BATTERY_BACKED,
> > + .reg_read = abx80x_nvmem_read,
> > + .reg_write = abx80x_nvmem_write,
> > + .size = ABX8XX_RAM_SIZE,
> > + .priv = priv,
> > + };
> > +
> > + return devm_rtc_nvmem_register(priv->rtc, &config);
> > +}
> > +
> > static int abx80x_probe(struct i2c_client *client,
> > const struct i2c_device_id *id)
> > {
> > @@ -824,6 +897,10 @@ static int abx80x_probe(struct i2c_client *client,
> > return err;
> > }
> >
> > + err = abx80x_setup_nvmem(priv);
> > + if (err)
> > + return err;
> > +
> > if (client->irq > 0) {
> > dev_info(&client->dev, "IRQ %d supplied\n", client->irq);
> > err = devm_request_threaded_irq(&client->dev, client->irq, NULL,
>
> ping?
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/drivers/rtc/rtc-abx80x.c?id=e90ff8ede777b98b44611b416b1ae6be94258335
--
Alexandre Belloni, co-owner and COO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
On 3/13/23 14:38, Alexandre Belloni wrote:
> On 13/03/2023 11:28:30-0400, Sean Anderson wrote:
>> On 12/22/22 16:45, Sean Anderson wrote:
>> > This adds support for the 256-byte internal RAM. There are two windows
>> > which can be used to access this RAM: 64 bytes at 0x40 (the "standard"
>> > address space) and 128 bytes at 0x80 (the "alternate" address space). We
>> > use the standard address space because it is also accessible over SPI
>> > (if such a port is ever done). We are limited to 32-byte reads for SMBus
>> > compatibility, so there's no advantage to using the alternate address
>> > space.
>> >
>> > There are some reserved bits in the EXTRAM register, and the datasheet
>> > doesn't say what to do with them. I've opted to skip a read/modify/write
>> > and just write the whole thing. If this driver is ever converted to
>> > regmap, this would be a good place to use regmap_update_bits.
>> >
>> > Signed-off-by: Sean Anderson <[email protected]>
>> > ---
>> >
>> > Changes in v4:
>> > - Remove unused variable
>> >
>> > Changes in v3:
>> > - Use devm_rtc_nvmem_register
>> > - Remove ifdefs
>> >
>> > Changes in v2:
>> > - Fix building on non-arm platforms
>> >
>> > drivers/rtc/rtc-abx80x.c | 77 ++++++++++++++++++++++++++++++++++++++++
>> > 1 file changed, 77 insertions(+)
>> >
>> > diff --git a/drivers/rtc/rtc-abx80x.c b/drivers/rtc/rtc-abx80x.c
>> > index 9b0138d07232..74ff820f5481 100644
>> > --- a/drivers/rtc/rtc-abx80x.c
>> > +++ b/drivers/rtc/rtc-abx80x.c
>> > @@ -11,6 +11,7 @@
>> > */
>> >
>> > #include <linux/bcd.h>
>> > +#include <linux/bitfield.h>
>> > #include <linux/i2c.h>
>> > #include <linux/module.h>
>> > #include <linux/of_device.h>
>> > @@ -87,6 +88,16 @@
>> > #define ABX8XX_TRICKLE_STANDARD_DIODE 0x8
>> > #define ABX8XX_TRICKLE_SCHOTTKY_DIODE 0x4
>> >
>> > +#define ABX8XX_REG_EXTRAM 0x3f
>> > +#define ABX8XX_EXTRAM_XADS GENMASK(1, 0)
>> > +
>> > +#define ABX8XX_SRAM_BASE 0x40
>> > +#define ABX8XX_SRAM_WIN_SIZE 0x40
>> > +#define ABX8XX_RAM_SIZE 256
>> > +
>> > +#define NVMEM_ADDR_LOWER GENMASK(5, 0)
>> > +#define NVMEM_ADDR_UPPER GENMASK(7, 6)
>> > +
>> > static u8 trickle_resistors[] = {0, 3, 6, 11};
>> >
>> > enum abx80x_chip {AB0801, AB0803, AB0804, AB0805,
>> > @@ -673,6 +684,68 @@ static int abx80x_setup_watchdog(struct abx80x_priv *priv)
>> > }
>> > #endif
>> >
>> > +static int abx80x_nvmem_xfer(struct abx80x_priv *priv, unsigned int offset,
>> > + void *val, size_t bytes, bool write)
>> > +{
>> > + int ret;
>> > +
>> > + while (bytes) {
>> > + u8 extram, reg, len, lower, upper;
>> > +
>> > + lower = FIELD_GET(NVMEM_ADDR_LOWER, offset);
>> > + upper = FIELD_GET(NVMEM_ADDR_UPPER, offset);
>> > + extram = FIELD_PREP(ABX8XX_EXTRAM_XADS, upper);
>> > + reg = ABX8XX_SRAM_BASE + lower;
>> > + len = min(lower + bytes, (size_t)ABX8XX_SRAM_WIN_SIZE) - lower;
>> > + len = min_t(u8, len, I2C_SMBUS_BLOCK_MAX);
>> > +
>> > + ret = i2c_smbus_write_byte_data(priv->client, ABX8XX_REG_EXTRAM,
>> > + extram);
>> > + if (ret)
>> > + return ret;
>> > +
>> > + if (write)
>> > + ret = i2c_smbus_write_i2c_block_data(priv->client, reg,
>> > + len, val);
>> > + else
>> > + ret = i2c_smbus_read_i2c_block_data(priv->client, reg,
>> > + len, val);
>> > + if (ret)
>> > + return ret;
>> > +
>> > + offset += len;
>> > + val += len;
>> > + bytes -= len;
>> > + }
>> > +
>> > + return 0;
>> > +}
>> > +
>> > +static int abx80x_nvmem_read(void *priv, unsigned int offset, void *val,
>> > + size_t bytes)
>> > +{
>> > + return abx80x_nvmem_xfer(priv, offset, val, bytes, false);
>> > +}
>> > +
>> > +static int abx80x_nvmem_write(void *priv, unsigned int offset, void *val,
>> > + size_t bytes)
>> > +{
>> > + return abx80x_nvmem_xfer(priv, offset, val, bytes, true);
>> > +}
>> > +
>> > +static int abx80x_setup_nvmem(struct abx80x_priv *priv)
>> > +{
>> > + struct nvmem_config config = {
>> > + .type = NVMEM_TYPE_BATTERY_BACKED,
>> > + .reg_read = abx80x_nvmem_read,
>> > + .reg_write = abx80x_nvmem_write,
>> > + .size = ABX8XX_RAM_SIZE,
>> > + .priv = priv,
>> > + };
>> > +
>> > + return devm_rtc_nvmem_register(priv->rtc, &config);
>> > +}
>> > +
>> > static int abx80x_probe(struct i2c_client *client,
>> > const struct i2c_device_id *id)
>> > {
>> > @@ -824,6 +897,10 @@ static int abx80x_probe(struct i2c_client *client,
>> > return err;
>> > }
>> >
>> > + err = abx80x_setup_nvmem(priv);
>> > + if (err)
>> > + return err;
>> > +
>> > if (client->irq > 0) {
>> > dev_info(&client->dev, "IRQ %d supplied\n", client->irq);
>> > err = devm_request_threaded_irq(&client->dev, client->irq, NULL,
>>
>> ping?
>
> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/drivers/rtc/rtc-abx80x.c?id=e90ff8ede777b98b44611b416b1ae6be94258335
>
Ah, thanks. I never heard anything about this so I assumed it got forgotten.
--Sean