Add GPIO line names as described by the sm8350-hdk schematic.
Signed-off-by: Robert Foss <[email protected]>
---
arch/arm64/boot/dts/qcom/sm8350-hdk.dts | 205 ++++++++++++++++++++++++
1 file changed, 205 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
index 0fcf5bd88fc7..e6deb08c6da0 100644
--- a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
+++ b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
@@ -233,6 +233,211 @@ &slpi {
&tlmm {
gpio-reserved-ranges = <52 8>;
+
+ gpio-line-names =
+ "APPS_I2C_SDA", /* GPIO_0 */
+ "APPS_I2C_SCL",
+ "FSA_INT_N",
+ "USER_LED3_EN",
+ "SMBUS_SDA_1P8",
+ "SMBUS_SCL_1P8",
+ "2M2_3P3_EN",
+ "ALERT_DUAL_M2_N",
+ "EXP_UART_CTS",
+ "EXP_UART_RFR",
+ "EXP_UART_TX", /* GPIO_10 */
+ "EXP_UART_RX",
+ "NC",
+ "NC",
+ "RCM_MARKER1",
+ "WSA0_EN",
+ "CAM1_RESET_N",
+ "CAM0_RESET_N",
+ "DEBUG_UART_TX",
+ "DEBUG_UART_RX",
+ "TS_I2C_SDA", /* GPIO_20 */
+ "TS_I2C_SCL",
+ "TS_RESET_N",
+ "TS_INT_N",
+ "DISP0_RESET_N",
+ "DISP1_RESET_N",
+ "ETH_RESET",
+ "RCM_MARKER2",
+ "CAM_DC_MIPI_MUX_EN",
+ "CAM_DC_MIPI_MUX_SEL",
+ "AFC_PHY_TA_D_PLUS", /* GPIO_30 */
+ "AFC_PHY_TA_D_MINUS",
+ "PM8008_1_IRQ",
+ "PM8008_1_RESET_N",
+ "PM8008_2_IRQ",
+ "PM8008_2_RESET_N",
+ "CAM_DC_I3C_SDA",
+ "CAM_DC_I3C_SCL",
+ "FP_INT_N",
+ "FP_WUHB_INT_N",
+ "SMB_SPMI_DATA", /* GPIO_40 */
+ "SMB_SPMI_CLK",
+ "USB_HUB_RESET",
+ "FORCE_USB_BOOT",
+ "LRF_IRQ",
+ "NC",
+ "IMU2_INT",
+ "HDMI_3P3_EN",
+ "HDMI_RSTN",
+ "HDMI_1P2_EN",
+ "HDMI_INT", /* GPIO_50 */
+ "USB1_ID",
+ "FP_SPI_MISO",
+ "FP_SPI_MOSI",
+ "FP_SPI_CLK",
+ "FP_SPI_CS_N",
+ "NFC_ESE_SPI_MISO",
+ "NFC_ESE_SPI_MOSI",
+ "NFC_ESE_SPI_CLK",
+ "NFC_ESE_SPI_CS",
+ "NFC_I2C_SDA", /* GPIO_60 */
+ "NFC_I2C_SCLC",
+ "NFC_EN",
+ "NFC_CLK_REQ",
+ "HST_WLAN_EN",
+ "HST_BT_EN",
+ "HST_SW_CTRL",
+ "NC",
+ "HST_BT_UART_CTS",
+ "HST_BT_UART_RFR",
+ "HST_BT_UART_TX", /* GPIO_70 */
+ "HST_BT_UART_RX",
+ "CAM_DC_SPI0_MISO",
+ "CAM_DC_SPI0_MOSI",
+ "CAM_DC_SPI0_CLK",
+ "CAM_DC_SPI0_CS_N",
+ "CAM_DC_SPI1_MISO",
+ "CAM_DC_SPI1_MOSI",
+ "CAM_DC_SPI1_CLK",
+ "CAM_DC_SPI1_CS_N",
+ "HALL_INT_N", /* GPIO_80 */
+ "USB_PHY_PS",
+ "MDP_VSYNC_P",
+ "MDP_VSYNC_S",
+ "ETH_3P3_EN",
+ "RADAR_INT",
+ "NFC_DWL_REQ",
+ "SM_GPIO_87",
+ "WCD_RESET_N",
+ "ALSP_INT_N",
+ "PRESS_INT", /* GPIO_90 */
+ "SAR_INT_N",
+ "SD_CARD_DET_N",
+ "NC",
+ "PCIE0_RESET_N",
+ "PCIE0_CLK_REQ_N",
+ "PCIE0_WAKE_N",
+ "PCIE1_RESET_N",
+ "PCIE1_CLK_REQ_N",
+ "PCIE1_WAKE_N",
+ "CAM_MCLK0", /* GPIO_100 */
+ "CAM_MCLK1",
+ "CAM_MCLK2",
+ "CAM_MCLK3",
+ "CAM_MCLK4",
+ "CAM_MCLK5",
+ "CAM2_RESET_N",
+ "CCI_I2C0_SDA",
+ "CCI_I2C0_SCL",
+ "CCI_I2C1_SDA",
+ "CCI_I2C1_SCL", /* GPIO_110 */
+ "CCI_I2C2_SDA",
+ "CCI_I2C2_SCL",
+ "CCI_I2C3_SDA",
+ "CCI_I2C3_SCL",
+ "CAM5_RESET_N",
+ "CAM4_RESET_N",
+ "CAM3_RESET_N",
+ "IMU1_INT",
+ "MAG_INT_N",
+ "MI2S2_I2S_SCK", /* GPIO_120 */
+ "MI2S2_I2S_DAT0",
+ "MI2S2_I2S_WS",
+ "HIFI_DAC_I2S_MCLK",
+ "MI2S2_I2S_DAT1",
+ "HIFI_DAC_I2S_SCK",
+ "HIFI_DAC_I2S_DAT0",
+ "NC",
+ "HIFI_DAC_I2S_WS",
+ "HST_BT_WLAN_SLIMBUS_CLK",
+ "HST_BT_WLAN_SLIMBUS_DAT0", /* GPIO_130 */
+ "BT_LED_EN",
+ "WLAN_LED_EN",
+ "NC",
+ "NC",
+ "NC",
+ "UIM2_PRESENT",
+ "NC",
+ "NC",
+ "NC",
+ "UIM1_PRESENT", /* GPIO_140 */
+ "NC",
+ "SM_RFFE0_DATA",
+ "NC",
+ "SM_RFFE1_DATA",
+ "SM_MSS_GRFC4",
+ "SM_MSS_GRFC5",
+ "SM_MSS_GRFC6",
+ "SM_MSS_GRFC7",
+ "SM_RFFE4_CLK",
+ "SM_RFFE4_DATA", /* GPIO_150 */
+ "WLAN_COEX_UART1_RX",
+ "WLAN_COEX_UART1_TX",
+ "HST_SW_CTRL",
+ "DSI0_STATUS",
+ "DSI1_STATUS",
+ "APPS_PBL_BOOT_SPEED_1",
+ "APPS_BOOT_FROM_ROM",
+ "APPS_PBL_BOOT_SPEED_0",
+ "QLINK0_REQ",
+ "QLINK0_EN", /* GPIO_160 */
+ "QLINK0_WMSS_RESET_N",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "WCD_SWR_TX_CLK",
+ "WCD_SWR_TX_DATA0",
+ "WCD_SWR_TX_DATA1", /* GPIO_170 */
+ "WCD_SWR_RX_CLK",
+ "WCD_SWR_RX_DATA0",
+ "WCD_SWR_RX_DATA1",
+ "DMIC01_CLK",
+ "DMIC01_DATA",
+ "DMIC23_CLK",
+ "DMIC23_DATA",
+ "WSA_SWR_CLK",
+ "WSA_SWR_DATA",
+ "DMIC45_CLK", /* GPIO_180 */
+ "DMIC45_DATA",
+ "WCD_SWR_TX_DATA2",
+ "SENSOR_I3C_SDA",
+ "SENSOR_I3C_SCL",
+ "CAM_OIS0_I3C_SDA",
+ "CAM_OIS0_I3C_SCL",
+ "IMU_SPI_MISO",
+ "IMU_SPI_MOSI",
+ "IMU_SPI_CLK",
+ "IMU_SPI_CS_N", /* GPIO_190 */
+ "MAG_I2C_SDA",
+ "MAG_I2C_SCL",
+ "SENSOR_I2C_SDA",
+ "SENSOR_I2C_SCL",
+ "RADAR_SPI_MISO",
+ "RADAR_SPI_MOSI",
+ "RADAR_SPI_CLK",
+ "RADAR_SPI_CS_N",
+ "HST_BLE_UART_TX",
+ "HST_BLE_UART_RX", /* GPIO_200 */
+ "HST_WLAN_UART_TX",
+ "HST_WLAN_UART_RX";
};
&uart2 {
--
2.34.1
On 12/30/2022 7:35 AM, Robert Foss wrote:
> Add GPIO line names as described by the sm8350-hdk schematic.
>
> Signed-off-by: Robert Foss <[email protected]>
Reviewed-by: Jessica Zhang <[email protected]>
Tested-by: Jessica Zhang <[email protected]> #SM8350 (HDK)
> ---
> arch/arm64/boot/dts/qcom/sm8350-hdk.dts | 205 ++++++++++++++++++++++++
> 1 file changed, 205 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
> index 0fcf5bd88fc7..e6deb08c6da0 100644
> --- a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
> +++ b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
> @@ -233,6 +233,211 @@ &slpi {
>
> &tlmm {
> gpio-reserved-ranges = <52 8>;
> +
> + gpio-line-names =
> + "APPS_I2C_SDA", /* GPIO_0 */
> + "APPS_I2C_SCL",
> + "FSA_INT_N",
> + "USER_LED3_EN",
> + "SMBUS_SDA_1P8",
> + "SMBUS_SCL_1P8",
> + "2M2_3P3_EN",
> + "ALERT_DUAL_M2_N",
> + "EXP_UART_CTS",
> + "EXP_UART_RFR",
> + "EXP_UART_TX", /* GPIO_10 */
> + "EXP_UART_RX",
> + "NC",
> + "NC",
> + "RCM_MARKER1",
> + "WSA0_EN",
> + "CAM1_RESET_N",
> + "CAM0_RESET_N",
> + "DEBUG_UART_TX",
> + "DEBUG_UART_RX",
> + "TS_I2C_SDA", /* GPIO_20 */
> + "TS_I2C_SCL",
> + "TS_RESET_N",
> + "TS_INT_N",
> + "DISP0_RESET_N",
> + "DISP1_RESET_N",
> + "ETH_RESET",
> + "RCM_MARKER2",
> + "CAM_DC_MIPI_MUX_EN",
> + "CAM_DC_MIPI_MUX_SEL",
> + "AFC_PHY_TA_D_PLUS", /* GPIO_30 */
> + "AFC_PHY_TA_D_MINUS",
> + "PM8008_1_IRQ",
> + "PM8008_1_RESET_N",
> + "PM8008_2_IRQ",
> + "PM8008_2_RESET_N",
> + "CAM_DC_I3C_SDA",
> + "CAM_DC_I3C_SCL",
> + "FP_INT_N",
> + "FP_WUHB_INT_N",
> + "SMB_SPMI_DATA", /* GPIO_40 */
> + "SMB_SPMI_CLK",
> + "USB_HUB_RESET",
> + "FORCE_USB_BOOT",
> + "LRF_IRQ",
> + "NC",
> + "IMU2_INT",
> + "HDMI_3P3_EN",
> + "HDMI_RSTN",
> + "HDMI_1P2_EN",
> + "HDMI_INT", /* GPIO_50 */
> + "USB1_ID",
> + "FP_SPI_MISO",
> + "FP_SPI_MOSI",
> + "FP_SPI_CLK",
> + "FP_SPI_CS_N",
> + "NFC_ESE_SPI_MISO",
> + "NFC_ESE_SPI_MOSI",
> + "NFC_ESE_SPI_CLK",
> + "NFC_ESE_SPI_CS",
> + "NFC_I2C_SDA", /* GPIO_60 */
> + "NFC_I2C_SCLC",
> + "NFC_EN",
> + "NFC_CLK_REQ",
> + "HST_WLAN_EN",
> + "HST_BT_EN",
> + "HST_SW_CTRL",
> + "NC",
> + "HST_BT_UART_CTS",
> + "HST_BT_UART_RFR",
> + "HST_BT_UART_TX", /* GPIO_70 */
> + "HST_BT_UART_RX",
> + "CAM_DC_SPI0_MISO",
> + "CAM_DC_SPI0_MOSI",
> + "CAM_DC_SPI0_CLK",
> + "CAM_DC_SPI0_CS_N",
> + "CAM_DC_SPI1_MISO",
> + "CAM_DC_SPI1_MOSI",
> + "CAM_DC_SPI1_CLK",
> + "CAM_DC_SPI1_CS_N",
> + "HALL_INT_N", /* GPIO_80 */
> + "USB_PHY_PS",
> + "MDP_VSYNC_P",
> + "MDP_VSYNC_S",
> + "ETH_3P3_EN",
> + "RADAR_INT",
> + "NFC_DWL_REQ",
> + "SM_GPIO_87",
> + "WCD_RESET_N",
> + "ALSP_INT_N",
> + "PRESS_INT", /* GPIO_90 */
> + "SAR_INT_N",
> + "SD_CARD_DET_N",
> + "NC",
> + "PCIE0_RESET_N",
> + "PCIE0_CLK_REQ_N",
> + "PCIE0_WAKE_N",
> + "PCIE1_RESET_N",
> + "PCIE1_CLK_REQ_N",
> + "PCIE1_WAKE_N",
> + "CAM_MCLK0", /* GPIO_100 */
> + "CAM_MCLK1",
> + "CAM_MCLK2",
> + "CAM_MCLK3",
> + "CAM_MCLK4",
> + "CAM_MCLK5",
> + "CAM2_RESET_N",
> + "CCI_I2C0_SDA",
> + "CCI_I2C0_SCL",
> + "CCI_I2C1_SDA",
> + "CCI_I2C1_SCL", /* GPIO_110 */
> + "CCI_I2C2_SDA",
> + "CCI_I2C2_SCL",
> + "CCI_I2C3_SDA",
> + "CCI_I2C3_SCL",
> + "CAM5_RESET_N",
> + "CAM4_RESET_N",
> + "CAM3_RESET_N",
> + "IMU1_INT",
> + "MAG_INT_N",
> + "MI2S2_I2S_SCK", /* GPIO_120 */
> + "MI2S2_I2S_DAT0",
> + "MI2S2_I2S_WS",
> + "HIFI_DAC_I2S_MCLK",
> + "MI2S2_I2S_DAT1",
> + "HIFI_DAC_I2S_SCK",
> + "HIFI_DAC_I2S_DAT0",
> + "NC",
> + "HIFI_DAC_I2S_WS",
> + "HST_BT_WLAN_SLIMBUS_CLK",
> + "HST_BT_WLAN_SLIMBUS_DAT0", /* GPIO_130 */
> + "BT_LED_EN",
> + "WLAN_LED_EN",
> + "NC",
> + "NC",
> + "NC",
> + "UIM2_PRESENT",
> + "NC",
> + "NC",
> + "NC",
> + "UIM1_PRESENT", /* GPIO_140 */
> + "NC",
> + "SM_RFFE0_DATA",
> + "NC",
> + "SM_RFFE1_DATA",
> + "SM_MSS_GRFC4",
> + "SM_MSS_GRFC5",
> + "SM_MSS_GRFC6",
> + "SM_MSS_GRFC7",
> + "SM_RFFE4_CLK",
> + "SM_RFFE4_DATA", /* GPIO_150 */
> + "WLAN_COEX_UART1_RX",
> + "WLAN_COEX_UART1_TX",
> + "HST_SW_CTRL",
> + "DSI0_STATUS",
> + "DSI1_STATUS",
> + "APPS_PBL_BOOT_SPEED_1",
> + "APPS_BOOT_FROM_ROM",
> + "APPS_PBL_BOOT_SPEED_0",
> + "QLINK0_REQ",
> + "QLINK0_EN", /* GPIO_160 */
> + "QLINK0_WMSS_RESET_N",
> + "NC",
> + "NC",
> + "NC",
> + "NC",
> + "NC",
> + "NC",
> + "WCD_SWR_TX_CLK",
> + "WCD_SWR_TX_DATA0",
> + "WCD_SWR_TX_DATA1", /* GPIO_170 */
> + "WCD_SWR_RX_CLK",
> + "WCD_SWR_RX_DATA0",
> + "WCD_SWR_RX_DATA1",
> + "DMIC01_CLK",
> + "DMIC01_DATA",
> + "DMIC23_CLK",
> + "DMIC23_DATA",
> + "WSA_SWR_CLK",
> + "WSA_SWR_DATA",
> + "DMIC45_CLK", /* GPIO_180 */
> + "DMIC45_DATA",
> + "WCD_SWR_TX_DATA2",
> + "SENSOR_I3C_SDA",
> + "SENSOR_I3C_SCL",
> + "CAM_OIS0_I3C_SDA",
> + "CAM_OIS0_I3C_SCL",
> + "IMU_SPI_MISO",
> + "IMU_SPI_MOSI",
> + "IMU_SPI_CLK",
> + "IMU_SPI_CS_N", /* GPIO_190 */
> + "MAG_I2C_SDA",
> + "MAG_I2C_SCL",
> + "SENSOR_I2C_SDA",
> + "SENSOR_I2C_SCL",
> + "RADAR_SPI_MISO",
> + "RADAR_SPI_MOSI",
> + "RADAR_SPI_CLK",
> + "RADAR_SPI_CS_N",
> + "HST_BLE_UART_TX",
> + "HST_BLE_UART_RX", /* GPIO_200 */
> + "HST_WLAN_UART_TX",
> + "HST_WLAN_UART_RX";
> };
>
> &uart2 {
> --
> 2.34.1
>