2023-01-04 03:12:02

by Chancel Liu

[permalink] [raw]
Subject: [PATCH] ASoC: fsl_micfil: Correct the number of steps on SX controls

The parameter "max" of SOC_SINGLE_SX_TLV() means the number of steps
rather than maximum value. This patch corrects the minimum value to -8
and the number of steps to 15.

Signed-off-by: Chancel Liu <[email protected]>
---
sound/soc/fsl/fsl_micfil.c | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/sound/soc/fsl/fsl_micfil.c b/sound/soc/fsl/fsl_micfil.c
index d7e6fc996166..d4d3bc7ca87c 100644
--- a/sound/soc/fsl/fsl_micfil.c
+++ b/sound/soc/fsl/fsl_micfil.c
@@ -325,21 +325,21 @@ static int hwvad_detected(struct snd_kcontrol *kcontrol,

static const struct snd_kcontrol_new fsl_micfil_snd_controls[] = {
SOC_SINGLE_SX_TLV("CH0 Volume", REG_MICFIL_OUT_CTRL,
- MICFIL_OUTGAIN_CHX_SHIFT(0), 0xF, 0x7, gain_tlv),
+ MICFIL_OUTGAIN_CHX_SHIFT(0), 0x8, 0xF, gain_tlv),
SOC_SINGLE_SX_TLV("CH1 Volume", REG_MICFIL_OUT_CTRL,
- MICFIL_OUTGAIN_CHX_SHIFT(1), 0xF, 0x7, gain_tlv),
+ MICFIL_OUTGAIN_CHX_SHIFT(1), 0x8, 0xF, gain_tlv),
SOC_SINGLE_SX_TLV("CH2 Volume", REG_MICFIL_OUT_CTRL,
- MICFIL_OUTGAIN_CHX_SHIFT(2), 0xF, 0x7, gain_tlv),
+ MICFIL_OUTGAIN_CHX_SHIFT(2), 0x8, 0xF, gain_tlv),
SOC_SINGLE_SX_TLV("CH3 Volume", REG_MICFIL_OUT_CTRL,
- MICFIL_OUTGAIN_CHX_SHIFT(3), 0xF, 0x7, gain_tlv),
+ MICFIL_OUTGAIN_CHX_SHIFT(3), 0x8, 0xF, gain_tlv),
SOC_SINGLE_SX_TLV("CH4 Volume", REG_MICFIL_OUT_CTRL,
- MICFIL_OUTGAIN_CHX_SHIFT(4), 0xF, 0x7, gain_tlv),
+ MICFIL_OUTGAIN_CHX_SHIFT(4), 0x8, 0xF, gain_tlv),
SOC_SINGLE_SX_TLV("CH5 Volume", REG_MICFIL_OUT_CTRL,
- MICFIL_OUTGAIN_CHX_SHIFT(5), 0xF, 0x7, gain_tlv),
+ MICFIL_OUTGAIN_CHX_SHIFT(5), 0x8, 0xF, gain_tlv),
SOC_SINGLE_SX_TLV("CH6 Volume", REG_MICFIL_OUT_CTRL,
- MICFIL_OUTGAIN_CHX_SHIFT(6), 0xF, 0x7, gain_tlv),
+ MICFIL_OUTGAIN_CHX_SHIFT(6), 0x8, 0xF, gain_tlv),
SOC_SINGLE_SX_TLV("CH7 Volume", REG_MICFIL_OUT_CTRL,
- MICFIL_OUTGAIN_CHX_SHIFT(7), 0xF, 0x7, gain_tlv),
+ MICFIL_OUTGAIN_CHX_SHIFT(7), 0x8, 0xF, gain_tlv),
SOC_ENUM_EXT("MICFIL Quality Select",
fsl_micfil_quality_enum,
micfil_quality_get, micfil_quality_set),
--
2.25.1


2023-01-06 15:16:29

by Mark Brown

[permalink] [raw]
Subject: Re: [PATCH] ASoC: fsl_micfil: Correct the number of steps on SX controls

On Wed, 04 Jan 2023 10:57:54 +0800, Chancel Liu wrote:
> The parameter "max" of SOC_SINGLE_SX_TLV() means the number of steps
> rather than maximum value. This patch corrects the minimum value to -8
> and the number of steps to 15.
>
>

Applied to

https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next

Thanks!

[1/1] ASoC: fsl_micfil: Correct the number of steps on SX controls
commit: cdfa92eb90f5770b26a79824ef213ebdbbd988b1

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark