From: "Liam R. Howlett" <[email protected]>
Use the vma iterator so that the iterator can be invalidated or updated
to avoid each caller doing so.
Signed-off-by: Liam R. Howlett <[email protected]>
---
mm/mmap.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/mm/mmap.c b/mm/mmap.c
index 4dd7e48a312f..80f12fcf158c 100644
--- a/mm/mmap.c
+++ b/mm/mmap.c
@@ -2446,7 +2446,7 @@ do_vmi_align_munmap(struct vma_iterator *vmi, struct vm_area_struct *vma,
if (end < vma->vm_end && mm->map_count >= sysctl_max_map_count)
goto map_count_exceeded;
- error = __split_vma(mm, vma, start, 0);
+ error = vmi__split_vma(vmi, mm, vma, start, 0);
if (error)
goto start_split_failed;
@@ -2467,7 +2467,7 @@ do_vmi_align_munmap(struct vma_iterator *vmi, struct vm_area_struct *vma,
if (next->vm_end > end) {
struct vm_area_struct *split;
- error = __split_vma(mm, next, end, 1);
+ error = vmi__split_vma(vmi, mm, next, end, 1);
if (error)
goto end_split_failed;
--
2.35.1
Hello Liam,
I found 'make install' mm-unstable kernel fails from initramfs stage with
'not a dynamic executable' message. I confirmed the issue is not reproducible
before your patchset[1] but after the series[2].
I tried to bisect, but on a commit[3] middle of mm-unstable tree which this
patch is applied, I get below error while booting. Do you have an idea?
[ 2.118502] BUG: kernel NULL pointer dereference, address: 0000000000000078
[ 2.121516] #PF: supervisor read access in kernel mode
[ 2.121576] #PF: error_code(0x0000) - not-present page
[ 2.121576] PGD 0 P4D 0
[ 2.121576] Oops: 0000 [#1] PREEMPT SMP PTI
[ 2.121576] CPU: 2 PID: 237 Comm: modprobe Not tainted 6.2.0-rc1+ #18
[ 2.121576] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-pr4
[ 2.121576] RIP: 0010:mas_wr_walk (lib/maple_tree.c:1401 lib/maple_tree.c:2259 lib/maple_tree.c:3732 lib/maple_tree.c:3757)
[ 2.121576] Code: 00 48 8b 51 18 30 d2 48 89 53 08 83 f8 02 0f 87 64 01 00 00 4c 8d 42 08 0f b6 80 e68
Code starting with the faulting instruction
===========================================
0: 00 48 8b add %cl,-0x75(%rax)
3: 51 push %rcx
4: 18 30 sbb %dh,(%rax)
6: d2 48 89 rorb %cl,-0x77(%rax)
9: 53 push %rbx
a: 08 83 f8 02 0f 87 or %al,-0x78f0fd08(%rbx)
10: 64 01 00 add %eax,%fs:(%rax)
13: 00 4c 8d 42 add %cl,0x42(%rbp,%rcx,4)
17: 08 0f or %cl,(%rdi)
19: b6 80 mov $0x80,%dh
1b: 68 .byte 0x68
[ 2.121576] RSP: 0018:ffffa5190119fc28 EFLAGS: 00010246
[ 2.121576] RAX: 000000000000000f RBX: ffffa5190119fc78 RCX: ffffa5190119fd60
[ 2.121576] RDX: 0000000000000000 RSI: 000000000000000e RDI: 000000000000000e
[ 2.121576] RBP: ffffa5190119fc38 R08: 0000000000000008 R09: 0000000000000001
[ 2.121576] R10: ffff95f5c3435300 R11: ffff95f5c3434c48 R12: ffffa5190119fd60
[ 2.121576] R13: ffff95f5c9a26880 R14: ffff95f5c3433690 R15: 0000000000100073
[ 2.121576] FS: 0000000000000000(0000) GS:ffff9613fd480000(0000) knlGS:0000000000000000
[ 2.121576] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 2.121576] CR2: 0000000000000078 CR3: 0000000103430000 CR4: 00000000000006e0
[ 2.121576] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 2.121576] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 2.121576] Call Trace:
[ 2.121576] <TASK>
[ 2.121576] mas_wr_store_entry (lib/maple_tree.c:4382)
[ 2.121576] mas_store_prealloc (lib/maple_tree.c:249 lib/maple_tree.c:5706)
[ 2.121576] mmap_region (mm/mmap.c:2808)
[ 2.121576] do_mmap (mm/mmap.c:1506)
[ 2.121576] ? security_mmap_file (security/security.c:1670)
[ 2.121576] vm_mmap_pgoff (mm/util.c:542)
[ 2.121576] ksys_mmap_pgoff (mm/mmap.c:1552)
[ 2.121576] __x64_sys_mmap (arch/x86/kernel/sys_x86_64.c:86)
[ 2.121576] do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80)
[ 2.121576] entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120)
[ 2.121576] RIP: 0033:0x7ff228f7a186
[ 2.121576] Code: 1f 44 00 00 f3 0f 1e fa 41 f7 c1 ff 0f 00 00 75 2b 55 48 89 fd 53 89 cb 48 85 ff 74f
Code starting with the faulting instruction
===========================================
0: 1f (bad)
1: 44 00 00 add %r8b,(%rax)
4: f3 0f 1e fa endbr64
8: 41 f7 c1 ff 0f 00 00 test $0xfff,%r9d
f: 75 2b jne 0x3c
11: 55 push %rbp
12: 48 89 fd mov %rdi,%rbp
15: 53 push %rbx
16: 89 cb mov %ecx,%ebx
18: 48 85 ff test %rdi,%rdi
1b: 4f rex.WRXB
[ 2.121576] RSP: 002b:00007ffcbc695148 EFLAGS: 00000246 ORIG_RAX: 0000000000000009
[ 2.121576] RAX: ffffffffffffffda RBX: 0000000000000022 RCX: 00007ff228f7a186
[ 2.121576] RDX: 0000000000000003 RSI: 0000000000002000 RDI: 0000000000000000
[ 2.121576] RBP: 0000000000000000 R08: 00000000ffffffff R09: 0000000000000000
[ 2.121576] R10: 0000000000000022 R11: 0000000000000246 R12: 00007ff228f8a190
[ 2.121576] R13: 000000000000000c R14: 00007ff228f89060 R15: 0000000000000000
[ 2.121576] </TASK>
[ 2.174098] ata2: found unknown device (class 0)
[ 2.121576] Modules linked in:
[ 2.121576] Dumping ftrace buffer:
[ 2.121576] (ftrace buffer empty)
[ 2.121576] CR2: 0000000000000078
[ 2.179450] ata2.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
[ 2.179774] ---[ end trace 0000000000000000 ]---
[ 2.183410] RIP: 0010:mas_wr_walk (lib/maple_tree.c:1401 lib/maple_tree.c:2259 lib/maple_tree.c:3732 lib/maple_tree.c:3757)
[ 2.184545] Code: 00 48 8b 51 18 30 d2 48 89 53 08 83 f8 02 0f 87 64 01 00 00 4c 8d 42 08 0f b6 80 e68
Code starting with the faulting instruction
===========================================
0: 00 48 8b add %cl,-0x75(%rax)
3: 51 push %rcx
4: 18 30 sbb %dh,(%rax)
6: d2 48 89 rorb %cl,-0x77(%rax)
9: 53 push %rbx
a: 08 83 f8 02 0f 87 or %al,-0x78f0fd08(%rbx)
10: 64 01 00 add %eax,%fs:(%rax)
13: 00 4c 8d 42 add %cl,0x42(%rbp,%rcx,4)
17: 08 0f or %cl,(%rdi)
19: b6 80 mov $0x80,%dh
1b: 68 .byte 0x68
[ 2.185835] scsi 1:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5
[ 2.188543] RSP: 0018:ffffa5190119fc28 EFLAGS: 00010246
[ 2.188546] RAX: 000000000000000f RBX: ffffa5190119fc78 RCX: ffffa5190119fd60
[ 2.188547] RDX: 0000000000000000 RSI: 000000000000000e RDI: 000000000000000e
[ 2.188548] RBP: ffffa5190119fc38 R08: 0000000000000008 R09: 0000000000000001
[ 2.188550] R10: ffff95f5c3435300 R11: ffff95f5c3434c48 R12: ffffa5190119fd60
[ 2.188551] R13: ffff95f5c9a26880 R14: ffff95f5c3433690 R15: 0000000000100073
[ 2.188552] FS: 0000000000000000(0000) GS:ffff9613fd480000(0000) knlGS:0000000000000000
[ 2.188554] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 2.188556] CR2: 0000000000000078 CR3: 0000000103430000 CR4: 00000000000006e0
[ 2.188559] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 2.206738] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[1] https://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm.git/commit/?h=mm-unstable&id=a13d6f0ec9b80674195d74ddfb6dfd94d352d2bb
[2] https://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm.git/commit/?h=mm-unstable&id=1329c351b42e20fcd195829357f0eda607f3de09
[3] https://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm.git/commit/?h=mm-unstable&id=f569105c34815dee1751a00bc9ca5154cc96dd6a
Thanks,
SJ
On Thu, 5 Jan 2023 19:15:58 +0000 Liam Howlett <[email protected]> wrote:
> From: "Liam R. Howlett" <[email protected]>
>
> Use the vma iterator so that the iterator can be invalidated or updated
> to avoid each caller doing so.
>
> Signed-off-by: Liam R. Howlett <[email protected]>
> ---
> mm/mmap.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/mm/mmap.c b/mm/mmap.c
> index 4dd7e48a312f..80f12fcf158c 100644
> --- a/mm/mmap.c
> +++ b/mm/mmap.c
> @@ -2446,7 +2446,7 @@ do_vmi_align_munmap(struct vma_iterator *vmi, struct vm_area_struct *vma,
> if (end < vma->vm_end && mm->map_count >= sysctl_max_map_count)
> goto map_count_exceeded;
>
> - error = __split_vma(mm, vma, start, 0);
> + error = vmi__split_vma(vmi, mm, vma, start, 0);
> if (error)
> goto start_split_failed;
>
> @@ -2467,7 +2467,7 @@ do_vmi_align_munmap(struct vma_iterator *vmi, struct vm_area_struct *vma,
> if (next->vm_end > end) {
> struct vm_area_struct *split;
>
> - error = __split_vma(mm, next, end, 1);
> + error = vmi__split_vma(vmi, mm, next, end, 1);
> if (error)
> goto end_split_failed;
>
> --
> 2.35.1
>
>
Hello Liam,
On Sat, 7 Jan 2023 02:01:26 +0000 SeongJae Park <[email protected]> wrote:
> Hello Liam,
>
>
> I found 'make install' mm-unstable kernel fails from initramfs stage with
> 'not a dynamic executable' message. I confirmed the issue is not reproducible
> before your patchset[1] but after the series[2].
>
> I tried to bisect, but on a commit[3] middle of mm-unstable tree which this
> patch is applied, I get below error while booting. Do you have an idea?
I further bisected for the boot failure. The first bad commit was a8e0f2e12936
("mmap: change do_mas_munmap and do_mas_aligned_munmap() to use vma
iterator")[1]. The stacktrace on the commit is as below.
[ 2.125001] BUG: kernel NULL pointer dereference, address: 0000000000000078
[ 2.128035] #PF: supervisor read access in kernel mode
[ 2.128035] #PF: error_code(0x0000) - not-present page
[ 2.128035] PGD 0 P4D 0
[ 2.128035] Oops: 0000 [#1] PREEMPT SMP PTI
[ 2.128035] CPU: 27 PID: 238 Comm: modprobe Not tainted 6.2.0-rc1+ #24
[ 2.128035] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-pr4
[ 2.128035] RIP: 0010:mas_wr_walk (lib/maple_tree.c:1401 lib/maple_tree.c:2259 lib/maple_tree.c:3732 lib/maple_tree.c:3757)
[ 2.128035] Code: 00 48 8b 51 18 30 d2 48 89 53 08 83 f8 02 0f 87 64 01 00 00 4c 8d 42 08 0f b6 80 e68
Code starting with the faulting instruction
===========================================
0: 00 48 8b add %cl,-0x75(%rax)
3: 51 push %rcx
4: 18 30 sbb %dh,(%rax)
6: d2 48 89 rorb %cl,-0x77(%rax)
9: 53 push %rbx
a: 08 83 f8 02 0f 87 or %al,-0x78f0fd08(%rbx)
10: 64 01 00 add %eax,%fs:(%rax)
13: 00 4c 8d 42 add %cl,0x42(%rbp,%rcx,4)
17: 08 0f or %cl,(%rdi)
19: b6 80 mov $0x80,%dh
1b: 68 .byte 0x68
[ 2.128035] RSP: 0018:ffffba49c11b3c28 EFLAGS: 00010246
[ 2.128035] RAX: 000000000000000f RBX: ffffba49c11b3c78 RCX: ffffba49c11b3d60
[ 2.128035] RDX: 0000000000000000 RSI: 000000000000000e RDI: 000000000000000e
[ 2.128035] RBP: ffffba49c11b3c38 R08: 0000000000000008 R09: 0000000000000001
[ 2.128035] R10: ffff8fe4ca713500 R11: ffff8fe4ca713f48 R12: ffffba49c11b3d60
[ 2.128035] R13: ffff8fe4ca6f2140 R14: ffff8fe4ca711988 R15: 0000000000100073
[ 2.128035] FS: 0000000000000000(0000) GS:ffff9002fdac0000(0000) knlGS:0000000000000000
[ 2.128035] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 2.128035] CR2: 0000000000000078 CR3: 000000010a6d6000 CR4: 00000000000006e0
[ 2.128035] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 2.128035] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 2.128035] Call Trace:
[ 2.128035] <TASK>
[ 2.128035] mas_wr_store_entry (lib/maple_tree.c:4382)
[ 2.128035] mas_store_prealloc (lib/maple_tree.c:249 lib/maple_tree.c:5706)
[ 2.128035] mmap_region (mm/mmap.c:2765)
[ 2.128035] do_mmap (mm/mmap.c:1488)
[ 2.128035] ? security_mmap_file (security/security.c:1670)
[ 2.128035] vm_mmap_pgoff (mm/util.c:542)
[ 2.128035] ksys_mmap_pgoff (mm/mmap.c:1534)
[ 2.128035] __x64_sys_mmap (arch/x86/kernel/sys_x86_64.c:86)
[ 2.128035] do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80)
[ 2.128035] entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120)
[ 2.128035] RIP: 0033:0x7fea50d24186
[ 2.128035] Code: 1f 44 00 00 f3 0f 1e fa 41 f7 c1 ff 0f 00 00 75 2b 55 48 89 fd 53 89 cb 48 85 ff 74f
Code starting with the faulting instruction
===========================================
0: 1f (bad)
1: 44 00 00 add %r8b,(%rax)
4: f3 0f 1e fa endbr64
8: 41 f7 c1 ff 0f 00 00 test $0xfff,%r9d
f: 75 2b jne 0x3c
11: 55 push %rbp
12: 48 89 fd mov %rdi,%rbp
15: 53 push %rbx
16: 89 cb mov %ecx,%ebx
18: 48 85 ff test %rdi,%rdi
1b: 4f rex.WRXB
[ 2.128035] RSP: 002b:00007ffee1f7b1f8 EFLAGS: 00000246 ORIG_RAX: 0000000000000009
[ 2.128035] RAX: ffffffffffffffda RBX: 0000000000000022 RCX: 00007fea50d24186
[ 2.176096] ata2: found unknown device (class 0)
[ 2.128035] RDX: 0000000000000003 RSI: 0000000000002000 RDI: 0000000000000000
[ 2.128035] RBP: 0000000000000000 R08: 00000000ffffffff R09: 0000000000000000
[ 2.181946] ata2.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
[ 2.128035] R10: 0000000000000022 R11: 0000000000000246 R12: 00007fea50d34190
[ 2.128035] R13: 000000000000000c R14: 00007fea50d33060 R15: 0000000000000000
[ 2.188623] scsi 1:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5
[ 2.128035] </TASK>
[ 2.128035] Modules linked in:
[ 2.128035] Dumping ftrace buffer:
[ 2.128035] (ftrace buffer empty)
[ 2.128035] CR2: 0000000000000078
[ 2.196913] ---[ end trace 0000000000000000 ]---
[ 2.197932] RIP: 0010:mas_wr_walk (lib/maple_tree.c:1401 lib/maple_tree.c:2259 lib/maple_tree.c:3732 lib/maple_tree.c:3757)
[ 2.198869] Code: 00 48 8b 51 18 30 d2 48 89 53 08 83 f8 02 0f 87 64 01 00 00 4c 8d 42 08 0f b6 80 e68
Code starting with the faulting instruction
===========================================
0: 00 48 8b add %cl,-0x75(%rax)
3: 51 push %rcx
4: 18 30 sbb %dh,(%rax)
6: d2 48 89 rorb %cl,-0x77(%rax)
9: 53 push %rbx
a: 08 83 f8 02 0f 87 or %al,-0x78f0fd08(%rbx)
10: 64 01 00 add %eax,%fs:(%rax)
13: 00 4c 8d 42 add %cl,0x42(%rbp,%rcx,4)
17: 08 0f or %cl,(%rdi)
19: b6 80 mov $0x80,%dh
1b: 68 .byte 0x68
[ 2.202922] RSP: 0018:ffffba49c11b3c28 EFLAGS: 00010246
[ 2.204060] RAX: 000000000000000f RBX: ffffba49c11b3c78 RCX: ffffba49c11b3d60
[ 2.205608] RDX: 0000000000000000 RSI: 000000000000000e RDI: 000000000000000e
[ 2.207143] RBP: ffffba49c11b3c38 R08: 0000000000000008 R09: 0000000000000001
[ 2.208703] R10: ffff8fe4ca713500 R11: ffff8fe4ca713f48 R12: ffffba49c11b3d60
[ 2.210239] R13: ffff8fe4ca6f2140 R14: ffff8fe4ca711988 R15: 0000000000100073
[ 2.211781] FS: 0000000000000000(0000) GS:ffff9002fdac0000(0000) knlGS:0000000000000000
[ 2.213520] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 2.214756] CR2: 0000000000000078 CR3: 000000010a6d6000 CR4: 00000000000006e0
[ 2.216316] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[1] https://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm.git/commit/?h=mm-unstable&id=a8e0f2e12936b08e4abde7c867503177def79d12
Thanks,
SJ
>
> [ 2.118502] BUG: kernel NULL pointer dereference, address: 0000000000000078
> [ 2.121516] #PF: supervisor read access in kernel mode
> [ 2.121576] #PF: error_code(0x0000) - not-present page
> [ 2.121576] PGD 0 P4D 0
> [ 2.121576] Oops: 0000 [#1] PREEMPT SMP PTI
> [ 2.121576] CPU: 2 PID: 237 Comm: modprobe Not tainted 6.2.0-rc1+ #18
> [ 2.121576] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-pr4
> [ 2.121576] RIP: 0010:mas_wr_walk (lib/maple_tree.c:1401 lib/maple_tree.c:2259 lib/maple_tree.c:3732 lib/maple_tree.c:3757)
> [ 2.121576] Code: 00 48 8b 51 18 30 d2 48 89 53 08 83 f8 02 0f 87 64 01 00 00 4c 8d 42 08 0f b6 80 e68
>
> Code starting with the faulting instruction
> ===========================================
> 0: 00 48 8b add %cl,-0x75(%rax)
> 3: 51 push %rcx
> 4: 18 30 sbb %dh,(%rax)
> 6: d2 48 89 rorb %cl,-0x77(%rax)
> 9: 53 push %rbx
> a: 08 83 f8 02 0f 87 or %al,-0x78f0fd08(%rbx)
> 10: 64 01 00 add %eax,%fs:(%rax)
> 13: 00 4c 8d 42 add %cl,0x42(%rbp,%rcx,4)
> 17: 08 0f or %cl,(%rdi)
> 19: b6 80 mov $0x80,%dh
> 1b: 68 .byte 0x68
> [ 2.121576] RSP: 0018:ffffa5190119fc28 EFLAGS: 00010246
> [ 2.121576] RAX: 000000000000000f RBX: ffffa5190119fc78 RCX: ffffa5190119fd60
> [ 2.121576] RDX: 0000000000000000 RSI: 000000000000000e RDI: 000000000000000e
> [ 2.121576] RBP: ffffa5190119fc38 R08: 0000000000000008 R09: 0000000000000001
> [ 2.121576] R10: ffff95f5c3435300 R11: ffff95f5c3434c48 R12: ffffa5190119fd60
> [ 2.121576] R13: ffff95f5c9a26880 R14: ffff95f5c3433690 R15: 0000000000100073
> [ 2.121576] FS: 0000000000000000(0000) GS:ffff9613fd480000(0000) knlGS:0000000000000000
> [ 2.121576] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> [ 2.121576] CR2: 0000000000000078 CR3: 0000000103430000 CR4: 00000000000006e0
> [ 2.121576] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> [ 2.121576] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
> [ 2.121576] Call Trace:
> [ 2.121576] <TASK>
> [ 2.121576] mas_wr_store_entry (lib/maple_tree.c:4382)
> [ 2.121576] mas_store_prealloc (lib/maple_tree.c:249 lib/maple_tree.c:5706)
> [ 2.121576] mmap_region (mm/mmap.c:2808)
> [ 2.121576] do_mmap (mm/mmap.c:1506)
> [ 2.121576] ? security_mmap_file (security/security.c:1670)
> [ 2.121576] vm_mmap_pgoff (mm/util.c:542)
> [ 2.121576] ksys_mmap_pgoff (mm/mmap.c:1552)
> [ 2.121576] __x64_sys_mmap (arch/x86/kernel/sys_x86_64.c:86)
> [ 2.121576] do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80)
> [ 2.121576] entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120)
> [ 2.121576] RIP: 0033:0x7ff228f7a186
> [ 2.121576] Code: 1f 44 00 00 f3 0f 1e fa 41 f7 c1 ff 0f 00 00 75 2b 55 48 89 fd 53 89 cb 48 85 ff 74f
>
> Code starting with the faulting instruction
> ===========================================
> 0: 1f (bad)
> 1: 44 00 00 add %r8b,(%rax)
> 4: f3 0f 1e fa endbr64
> 8: 41 f7 c1 ff 0f 00 00 test $0xfff,%r9d
> f: 75 2b jne 0x3c
> 11: 55 push %rbp
> 12: 48 89 fd mov %rdi,%rbp
> 15: 53 push %rbx
> 16: 89 cb mov %ecx,%ebx
> 18: 48 85 ff test %rdi,%rdi
> 1b: 4f rex.WRXB
> [ 2.121576] RSP: 002b:00007ffcbc695148 EFLAGS: 00000246 ORIG_RAX: 0000000000000009
> [ 2.121576] RAX: ffffffffffffffda RBX: 0000000000000022 RCX: 00007ff228f7a186
> [ 2.121576] RDX: 0000000000000003 RSI: 0000000000002000 RDI: 0000000000000000
> [ 2.121576] RBP: 0000000000000000 R08: 00000000ffffffff R09: 0000000000000000
> [ 2.121576] R10: 0000000000000022 R11: 0000000000000246 R12: 00007ff228f8a190
> [ 2.121576] R13: 000000000000000c R14: 00007ff228f89060 R15: 0000000000000000
> [ 2.121576] </TASK>
> [ 2.174098] ata2: found unknown device (class 0)
> [ 2.121576] Modules linked in:
> [ 2.121576] Dumping ftrace buffer:
> [ 2.121576] (ftrace buffer empty)
> [ 2.121576] CR2: 0000000000000078
> [ 2.179450] ata2.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
> [ 2.179774] ---[ end trace 0000000000000000 ]---
> [ 2.183410] RIP: 0010:mas_wr_walk (lib/maple_tree.c:1401 lib/maple_tree.c:2259 lib/maple_tree.c:3732 lib/maple_tree.c:3757)
> [ 2.184545] Code: 00 48 8b 51 18 30 d2 48 89 53 08 83 f8 02 0f 87 64 01 00 00 4c 8d 42 08 0f b6 80 e68
>
> Code starting with the faulting instruction
> ===========================================
> 0: 00 48 8b add %cl,-0x75(%rax)
> 3: 51 push %rcx
> 4: 18 30 sbb %dh,(%rax)
> 6: d2 48 89 rorb %cl,-0x77(%rax)
> 9: 53 push %rbx
> a: 08 83 f8 02 0f 87 or %al,-0x78f0fd08(%rbx)
> 10: 64 01 00 add %eax,%fs:(%rax)
> 13: 00 4c 8d 42 add %cl,0x42(%rbp,%rcx,4)
> 17: 08 0f or %cl,(%rdi)
> 19: b6 80 mov $0x80,%dh
> 1b: 68 .byte 0x68
> [ 2.185835] scsi 1:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5
> [ 2.188543] RSP: 0018:ffffa5190119fc28 EFLAGS: 00010246
> [ 2.188546] RAX: 000000000000000f RBX: ffffa5190119fc78 RCX: ffffa5190119fd60
> [ 2.188547] RDX: 0000000000000000 RSI: 000000000000000e RDI: 000000000000000e
> [ 2.188548] RBP: ffffa5190119fc38 R08: 0000000000000008 R09: 0000000000000001
> [ 2.188550] R10: ffff95f5c3435300 R11: ffff95f5c3434c48 R12: ffffa5190119fd60
> [ 2.188551] R13: ffff95f5c9a26880 R14: ffff95f5c3433690 R15: 0000000000100073
> [ 2.188552] FS: 0000000000000000(0000) GS:ffff9613fd480000(0000) knlGS:0000000000000000
> [ 2.188554] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> [ 2.188556] CR2: 0000000000000078 CR3: 0000000103430000 CR4: 00000000000006e0
> [ 2.188559] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> [ 2.206738] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
>
> [1] https://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm.git/commit/?h=mm-unstable&id=a13d6f0ec9b80674195d74ddfb6dfd94d352d2bb
> [2] https://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm.git/commit/?h=mm-unstable&id=1329c351b42e20fcd195829357f0eda607f3de09
> [3] https://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm.git/commit/?h=mm-unstable&id=f569105c34815dee1751a00bc9ca5154cc96dd6a
>
>
> Thanks,
> SJ
>
* SeongJae Park <[email protected]> [230106 21:40]:
> Hello Liam,
>
> On Sat, 7 Jan 2023 02:01:26 +0000 SeongJae Park <[email protected]> wrote:
>
> > Hello Liam,
> >
> >
> > I found 'make install' mm-unstable kernel fails from initramfs stage with
> > 'not a dynamic executable' message. I confirmed the issue is not reproducible
> > before your patchset[1] but after the series[2].
> >
> > I tried to bisect, but on a commit[3] middle of mm-unstable tree which this
> > patch is applied, I get below error while booting. Do you have an idea?
>
> I further bisected for the boot failure. The first bad commit was a8e0f2e12936
> ("mmap: change do_mas_munmap and do_mas_aligned_munmap() to use vma
> iterator")[1]. The stacktrace on the commit is as below.
>
...
Thanks for your work on this.
I have found the issue and will send out a fix shortly. I am not
handling the invalidated state correctly in the write path.
On Mon, 9 Jan 2023 16:45:46 +0000 Liam Howlett <[email protected]> wrote:
> * SeongJae Park <[email protected]> [230106 21:40]:
> > Hello Liam,
> >
> > On Sat, 7 Jan 2023 02:01:26 +0000 SeongJae Park <[email protected]> wrote:
> >
> > > Hello Liam,
> > >
> > >
> > > I found 'make install' mm-unstable kernel fails from initramfs stage with
> > > 'not a dynamic executable' message. I confirmed the issue is not reproducible
> > > before your patchset[1] but after the series[2].
> > >
> > > I tried to bisect, but on a commit[3] middle of mm-unstable tree which this
> > > patch is applied, I get below error while booting. Do you have an idea?
> >
> > I further bisected for the boot failure. The first bad commit was a8e0f2e12936
> > ("mmap: change do_mas_munmap and do_mas_aligned_munmap() to use vma
> > iterator")[1]. The stacktrace on the commit is as below.
> >
> ...
>
> Thanks for your work on this.
>
> I have found the issue and will send out a fix shortly. I am not
> handling the invalidated state correctly in the write path.
Thank you, I tested the patch and confirmed it is fixing the boot failure. The
'make install' issue on my system is not fixed yet, though. While doing bisect
of the issue again with your boot failure fix, I found below build failure on a
commit applying a patch of this series, namely "userfaultfd: use vma iterator".
mm/madvise.c: In function ‘madvise_update_vma’:
mm/madvise.c:165:11: error: implicit declaration of function ‘__split_vma’; did you mean ‘split_vma’? [-Werror=implicit-function-declaration]
165 | error = __split_vma(mm, vma, start, 1);
| ^~~~~~~~~~~
| split_vma
cc1: some warnings being treated as errors
Maybe "mm: add temporary vma iterator versions of vma_merge(), split_vma(), and
__split_vma()" caused the build failure?
Thanks,
SJ
* SeongJae Park <[email protected]> [230109 14:28]:
> On Mon, 9 Jan 2023 16:45:46 +0000 Liam Howlett <[email protected]> wrote:
>
> > * SeongJae Park <[email protected]> [230106 21:40]:
> > > Hello Liam,
> > >
> > > On Sat, 7 Jan 2023 02:01:26 +0000 SeongJae Park <[email protected]> wrote:
> > >
> > > > Hello Liam,
> > > >
> > > >
> > > > I found 'make install' mm-unstable kernel fails from initramfs stage with
> > > > 'not a dynamic executable' message. I confirmed the issue is not reproducible
> > > > before your patchset[1] but after the series[2].
> > > >
> > > > I tried to bisect, but on a commit[3] middle of mm-unstable tree which this
> > > > patch is applied, I get below error while booting. Do you have an idea?
> > >
> > > I further bisected for the boot failure. The first bad commit was a8e0f2e12936
> > > ("mmap: change do_mas_munmap and do_mas_aligned_munmap() to use vma
> > > iterator")[1]. The stacktrace on the commit is as below.
> > >
> > ...
> >
> > Thanks for your work on this.
> >
> > I have found the issue and will send out a fix shortly. I am not
> > handling the invalidated state correctly in the write path.
>
> Thank you, I tested the patch and confirmed it is fixing the boot failure. The
> 'make install' issue on my system is not fixed yet, though. While doing bisect
> of the issue again with your boot failure fix, I found below build failure on a
> commit applying a patch of this series, namely "userfaultfd: use vma iterator".
>
> mm/madvise.c: In function ‘madvise_update_vma’:
> mm/madvise.c:165:11: error: implicit declaration of function ‘__split_vma’; did you mean ‘split_vma’? [-Werror=implicit-function-declaration]
> 165 | error = __split_vma(mm, vma, start, 1);
> | ^~~~~~~~~~~
> | split_vma
> cc1: some warnings being treated as errors
>
> Maybe "mm: add temporary vma iterator versions of vma_merge(), split_vma(), and
> __split_vma()" caused the build failure?
Yes, it seems I removed the external declaration before the function.
Thanks.
Hello Liam,
On Mon, 9 Jan 2023 20:30:50 +0000 Liam Howlett <[email protected]> wrote:
> * SeongJae Park <[email protected]> [230109 14:28]:
> > On Mon, 9 Jan 2023 16:45:46 +0000 Liam Howlett <[email protected]> wrote:
> >
> > > * SeongJae Park <[email protected]> [230106 21:40]:
> > > > Hello Liam,
> > > >
> > > > On Sat, 7 Jan 2023 02:01:26 +0000 SeongJae Park <[email protected]> wrote:
> > > >
> > > > > Hello Liam,
> > > > >
> > > > >
> > > > > I found 'make install' mm-unstable kernel fails from initramfs stage with
> > > > > 'not a dynamic executable' message. I confirmed the issue is not reproducible
> > > > > before your patchset[1] but after the series[2].
> > > > >
> > > > > I tried to bisect, but on a commit[3] middle of mm-unstable tree which this
> > > > > patch is applied, I get below error while booting. Do you have an idea?
> > > >
> > > > I further bisected for the boot failure. The first bad commit was a8e0f2e12936
> > > > ("mmap: change do_mas_munmap and do_mas_aligned_munmap() to use vma
> > > > iterator")[1]. The stacktrace on the commit is as below.
> > > >
> > > ...
> > >
> > > Thanks for your work on this.
> > >
> > > I have found the issue and will send out a fix shortly. I am not
> > > handling the invalidated state correctly in the write path.
> >
> > Thank you, I tested the patch and confirmed it is fixing the boot failure. The
> > 'make install' issue on my system is not fixed yet, though. While doing bisect
> > of the issue again with your boot failure fix, I found below build failure on a
> > commit applying a patch of this series, namely "userfaultfd: use vma iterator".
> >
> > mm/madvise.c: In function ‘madvise_update_vma’:
> > mm/madvise.c:165:11: error: implicit declaration of function ‘__split_vma’; did you mean ‘split_vma’? [-Werror=implicit-function-declaration]
> > 165 | error = __split_vma(mm, vma, start, 1);
> > | ^~~~~~~~~~~
> > | split_vma
> > cc1: some warnings being treated as errors
> >
> > Maybe "mm: add temporary vma iterator versions of vma_merge(), split_vma(), and
> > __split_vma()" caused the build failure?
>
> Yes, it seems I removed the external declaration before the function.
> Thanks.
I continued bisect with your fix for this[1], and found my 'make install' issue
comes from 'mm: change mprotect_fixup to vma iterator'.
[1] https://lore.kernel.org/linux-mm/[email protected]/
Thanks,
SJ