2023-01-12 16:00:18

by Balsam CHIHI

[permalink] [raw]
Subject: [PATCH v10 3/6] arm64/dts/mt8195: Add efuse node to mt8195

From: Balsam CHIHI <[email protected]>

Add efuse node.
This will be required by the thermal driver to get the calibration data.

Signed-off-by: Balsam CHIHI <[email protected]>
---
arch/arm64/boot/dts/mediatek/mt8195.dtsi | 6 ++++++
1 file changed, 6 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
index 5d31536f4c48..09df105f4606 100644
--- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
@@ -1380,6 +1380,12 @@ pciephy_glb_intr: pciephy-glb-intr@193 {
dp_calibration: dp-data@1ac {
reg = <0x1ac 0x10>;
};
+ lvts_efuse_data1: lvts1-calib@1bc {
+ reg = <0x1bc 0x14>;
+ };
+ lvts_efuse_data2: lvts2-calib@1d0 {
+ reg = <0x1d0 0x38>;
+ };
};

u3phy2: t-phy@11c40000 {
--
2.34.1


2023-01-13 12:06:09

by Matthias Brugger

[permalink] [raw]
Subject: Re: [PATCH v10 3/6] arm64/dts/mt8195: Add efuse node to mt8195



On 12/01/2023 16:28, [email protected] wrote:
> From: Balsam CHIHI <[email protected]>
>
> Add efuse node.
> This will be required by the thermal driver to get the calibration data.
>
> Signed-off-by: Balsam CHIHI <[email protected]>

Reviewed-by: Matthias Brugger <[email protected]>

> ---
> arch/arm64/boot/dts/mediatek/mt8195.dtsi | 6 ++++++
> 1 file changed, 6 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
> index 5d31536f4c48..09df105f4606 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
> @@ -1380,6 +1380,12 @@ pciephy_glb_intr: pciephy-glb-intr@193 {
> dp_calibration: dp-data@1ac {
> reg = <0x1ac 0x10>;
> };
> + lvts_efuse_data1: lvts1-calib@1bc {
> + reg = <0x1bc 0x14>;
> + };
> + lvts_efuse_data2: lvts2-calib@1d0 {
> + reg = <0x1d0 0x38>;
> + };
> };
>
> u3phy2: t-phy@11c40000 {

Subject: Re: [PATCH v10 3/6] arm64/dts/mt8195: Add efuse node to mt8195

Il 12/01/23 16:28, [email protected] ha scritto:
> From: Balsam CHIHI <[email protected]>
>
> Add efuse node.
> This will be required by the thermal driver to get the calibration data.
>
> Signed-off-by: Balsam CHIHI <[email protected]>
> Reviewed-by: Matthias Brugger <[email protected]>

Reviewed-by: AngeloGioacchino Del Regno <[email protected]>