Ocelot switches have the abilitiy to be used internally via
memory-mapped IO or externally via SPI or PCIe. This brings up issues
for documentation, where the same chip might be accessed internally in a
switchdev manner, or externally in a DSA configuration. This patch set
is perparation to bring DSA functionality to the VSC7512, utilizing as
much as possible with an almost identical VSC7514 chip.
This patch set changed quite a bit from v2, so I'll omit the background
of how those sets came to be. Rob offered a lot of very useful guidance.
My thanks.
At the end of the day, with this patch set, there should be a framework
to document Ocelot switches (and any switch) in scenarios where they can
be controlled internally (ethernet-switch) or externally (dsa-switch).
---
v6 -> v7
* Add Reviewed / Acked on patch 1
* Clean up descriptions on Ethernet / DSA switch port bindings
v5 -> v6
* Rebase so it applies to net-next cleanly.
* No other changes - during the last submission round I said I'd
submit v6 with a change to move $dsa-port.yaml to outside the allOf
list. In retrospect that wasn't the right thing to do, because later
in the patch series the $dsa-port.yaml is removed outright. So I
believe the submission in v5 to keep "type: object" was correct.
v4 -> v5
* Sync DSA maintainers with MAINTAINERS file (new patch 1)
* Undo move of port description of mediatek,mt7530.yaml (patch 4)
* Move removal of "^(ethernet-)?switch(@.*)?$" in dsa.yaml from patch 4
to patch 8
* Add more consistent capitalization in title lines and better Ethernet
switch port description. (patch 8)
v3 -> v4
* Renamed "base" to "ethernet-ports" to avoid confusion with the concept
of a base class.
* Squash ("dt-bindings: net: dsa: mediatek,mt7530: fix port description location")
patch into ("dt-bindings: net: dsa: utilize base definitions for standard dsa
switches")
* Corrections to fix confusion about additonalProperties vs unevaluatedProperties.
See specific patches for details.
v2 -> v3
* Restructured everything to use a "base" iref for devices that don't
have additional properties, and simply a "ref" for devices that do.
* New patches to fix up brcm,sf2, qca8k, and mt7530
* Fix unevaluatedProperties errors from previous sets (see specific
patches for more detail)
* Removed redundant "Device Tree Binding" from titles, where applicable.
v1 -> v2
* Two MFD patches were brought into the MFD tree, so are dropped
* Add first patch 1/6 to allow DSA devices to add ports and port
properties
* Test qca8k against new dt-bindings and fix warnings. (patch 2/6)
* Add tags (patch 3/6)
* Fix vsc7514 refs and properties
---
Colin Foster (10):
dt-bindings: dsa: sync with maintainers
dt-bindings: net: dsa: sf2: fix brcm,use-bcm-hdr documentation
dt-bindings: net: dsa: qca8k: remove address-cells and size-cells from
switch node
dt-bindings: net: dsa: utilize base definitions for standard dsa
switches
dt-bindings: net: dsa: allow additional ethernet-port properties
dt-bindings: net: dsa: qca8k: utilize shared dsa.yaml
dt-bindings: net: dsa: mediatek,mt7530: remove unnecessary dsa-port
reference
dt-bindings: net: add generic ethernet-switch
dt-bindings: net: add generic ethernet-switch-port binding
dt-bindings: net: mscc,vsc7514-switch: utilize generic
ethernet-switch.yaml
.../bindings/net/dsa/arrow,xrs700x.yaml | 2 +-
.../devicetree/bindings/net/dsa/brcm,b53.yaml | 2 +-
.../devicetree/bindings/net/dsa/brcm,sf2.yaml | 15 +++--
.../devicetree/bindings/net/dsa/dsa-port.yaml | 30 ++-------
.../devicetree/bindings/net/dsa/dsa.yaml | 49 +++++++--------
.../net/dsa/hirschmann,hellcreek.yaml | 2 +-
.../bindings/net/dsa/mediatek,mt7530.yaml | 6 +-
.../bindings/net/dsa/microchip,ksz.yaml | 2 +-
.../bindings/net/dsa/microchip,lan937x.yaml | 2 +-
.../bindings/net/dsa/mscc,ocelot.yaml | 2 +-
.../bindings/net/dsa/nxp,sja1105.yaml | 2 +-
.../devicetree/bindings/net/dsa/qca8k.yaml | 14 +----
.../devicetree/bindings/net/dsa/realtek.yaml | 2 +-
.../bindings/net/dsa/renesas,rzn1-a5psw.yaml | 2 +-
.../bindings/net/ethernet-switch-port.yaml | 26 ++++++++
.../bindings/net/ethernet-switch.yaml | 62 +++++++++++++++++++
.../bindings/net/mscc,vsc7514-switch.yaml | 31 +---------
MAINTAINERS | 2 +
18 files changed, 145 insertions(+), 108 deletions(-)
create mode 100644 Documentation/devicetree/bindings/net/ethernet-switch-port.yaml
create mode 100644 Documentation/devicetree/bindings/net/ethernet-switch.yaml
--
2.25.1
The property use-bcm-hdr was documented as an entry under the ports node
for the bcm_sf2 DSA switch. This property is actually evaluated for each
port. Correct the documentation to match the actual behavior and properly
reference dsa-port.yaml for additional properties of the node.
Suggested-by: Rob Herring <[email protected]>
Signed-off-by: Colin Foster <[email protected]>
Acked-by: Florian Fainelli <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
---
v4 -> v7
* No change
v3 -> v4
* Add Acked and Reviewed tags
v3
* New patch
---
.../devicetree/bindings/net/dsa/brcm,sf2.yaml | 15 ++++++++++-----
1 file changed, 10 insertions(+), 5 deletions(-)
diff --git a/Documentation/devicetree/bindings/net/dsa/brcm,sf2.yaml b/Documentation/devicetree/bindings/net/dsa/brcm,sf2.yaml
index d159ac78cec1..eed16e216fb6 100644
--- a/Documentation/devicetree/bindings/net/dsa/brcm,sf2.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/brcm,sf2.yaml
@@ -85,11 +85,16 @@ properties:
ports:
type: object
- properties:
- brcm,use-bcm-hdr:
- description: if present, indicates that the switch port has Broadcom
- tags enabled (per-packet metadata)
- type: boolean
+ patternProperties:
+ '^port@[0-9a-f]$':
+ $ref: dsa-port.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ brcm,use-bcm-hdr:
+ description: if present, indicates that the switch port has Broadcom
+ tags enabled (per-packet metadata)
+ type: boolean
required:
- reg
--
2.25.1
Explicitly allow additional properties for both the ethernet-port and
ethernet-ports properties. This specifically will allow the qca8k.yaml
binding to use shared properties.
Signed-off-by: Colin Foster <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
---
v5 -> v7
* No change
v4 -> v5
* Add Rob Reviewed
v3 -> v4
* Change ethernet-ports node to have "unevaluatedProperties: false"
instead of "additionalProperties: true"
* Change ethernet-port node to have "additionalProperties: true" instead
of "unevaluatedProperties: true"
* Add Reviewed tag
v2 -> v3
* No change
v1 -> v2
* New patch
---
Documentation/devicetree/bindings/net/dsa/dsa.yaml | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/net/dsa/dsa.yaml b/Documentation/devicetree/bindings/net/dsa/dsa.yaml
index efaa94cb89ae..7487ac0d6bb9 100644
--- a/Documentation/devicetree/bindings/net/dsa/dsa.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/dsa.yaml
@@ -41,6 +41,8 @@ patternProperties:
'#size-cells':
const: 0
+ unevaluatedProperties: false
+
patternProperties:
"^(ethernet-)?port@[0-9]+$":
type: object
@@ -48,7 +50,7 @@ patternProperties:
$ref: dsa-port.yaml#
- unevaluatedProperties: false
+ additionalProperties: true
oneOf:
- required:
--
2.25.1
The dsa-port.yaml binding had several references that can be common to all
ethernet ports, not just dsa-specific ones. Break out the generic bindings
to ethernet-switch-port.yaml they can be used by non-dsa drivers.
Signed-off-by: Colin Foster <[email protected]>
Suggested-by: Vladimir Oltean <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
---
v6 -> v7
* Update Ethernet switch port description to have meaning
* Update DSA switch port description to suggest it has additional
features
v5 -> v6
* Minor change to fix conflict with the removal of "Device Tree
Binding" in the title line
v4 -> v5
* Add Rob Reviewed tag
* Change Vivien to Vladimir to match MAINTAINERS
* Capitalize all words in title line (Generic DSA Switch Port)
* Add better description of an Ethernet switch port
v3 -> v4
* Add Florian Reviewed tag
v2 -> v3
* Change dsa-port title from "DSA Switch port Device Tree Bindings"
to "Generic DSA Switch port"
* Add reference to ethernet-switch-port.yaml# in dsa-port.yaml
* Change title of ethernet-switch-port.yaml from "Ethernet Switch
port Device Tree Bindings" to "Generic Ethernet Switch port"
* Remove most properties from ethernet-switch-port.yaml. They're
all in ethernet-controller, and are all allowed.
* ethernet-switch.yaml now only references ethernet-switch-port.yaml#
under the port node.
v1 -> v2
* Remove accidental addition of
"$ref: /schemas/net/ethernet-switch-port.yaml" which should be kept
out of dsa-port so that it doesn't get referenced multiple times
through both ethernet-switch and dsa-port.
---
.../devicetree/bindings/net/dsa/dsa-port.yaml | 28 ++++---------------
.../bindings/net/ethernet-switch-port.yaml | 26 +++++++++++++++++
.../bindings/net/ethernet-switch.yaml | 6 +---
MAINTAINERS | 1 +
4 files changed, 33 insertions(+), 28 deletions(-)
create mode 100644 Documentation/devicetree/bindings/net/ethernet-switch-port.yaml
diff --git a/Documentation/devicetree/bindings/net/dsa/dsa-port.yaml b/Documentation/devicetree/bindings/net/dsa/dsa-port.yaml
index fb338486ce85..480120469953 100644
--- a/Documentation/devicetree/bindings/net/dsa/dsa-port.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/dsa-port.yaml
@@ -4,7 +4,7 @@
$id: http://devicetree.org/schemas/net/dsa/dsa-port.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
-title: Ethernet Switch port
+title: Generic DSA Switch Port
maintainers:
- Andrew Lunn <[email protected]>
@@ -12,10 +12,11 @@ maintainers:
- Vladimir Oltean <[email protected]>
description:
- Ethernet switch port Description
+ A DSA switch port is a component of a switch that manages one MAC, and can
+ pass Ethernet frames. It can act as a stanadard Ethernet switch port, or have
+ DSA-specific functionality.
-allOf:
- - $ref: /schemas/net/ethernet-controller.yaml#
+$ref: /schemas/net/ethernet-switch-port.yaml#
properties:
reg:
@@ -58,25 +59,6 @@ properties:
- rtl8_4t
- seville
- phy-handle: true
-
- phy-mode: true
-
- fixed-link: true
-
- mac-address: true
-
- sfp: true
-
- managed: true
-
- rx-internal-delay-ps: true
-
- tx-internal-delay-ps: true
-
-required:
- - reg
-
# CPU and DSA ports must have phylink-compatible link descriptions
if:
oneOf:
diff --git a/Documentation/devicetree/bindings/net/ethernet-switch-port.yaml b/Documentation/devicetree/bindings/net/ethernet-switch-port.yaml
new file mode 100644
index 000000000000..d5cf7e40e3c3
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/ethernet-switch-port.yaml
@@ -0,0 +1,26 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/ethernet-switch-port.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic Ethernet Switch Port
+
+maintainers:
+ - Andrew Lunn <[email protected]>
+ - Florian Fainelli <[email protected]>
+ - Vladimir Oltean <[email protected]>
+
+description:
+ An Ethernet switch port is a component of a switch that manages one MAC, and
+ can pass Ethernet frames.
+
+$ref: ethernet-controller.yaml#
+
+properties:
+ reg:
+ description: Port number
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/net/ethernet-switch.yaml b/Documentation/devicetree/bindings/net/ethernet-switch.yaml
index 2466d05f9a6f..a04f8ef744aa 100644
--- a/Documentation/devicetree/bindings/net/ethernet-switch.yaml
+++ b/Documentation/devicetree/bindings/net/ethernet-switch.yaml
@@ -40,10 +40,6 @@ patternProperties:
type: object
description: Ethernet switch ports
- $ref: ethernet-controller.yaml#
-
- additionalProperties: true
-
oneOf:
- required:
- ports
@@ -60,7 +56,7 @@ $defs:
patternProperties:
"^(ethernet-)?port@[0-9]+$":
description: Ethernet switch ports
- $ref: ethernet-controller.yaml#
+ $ref: ethernet-switch-port.yaml#
unevaluatedProperties: false
...
diff --git a/MAINTAINERS b/MAINTAINERS
index b582e0835b46..efc9a12b6230 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -14542,6 +14542,7 @@ M: Florian Fainelli <[email protected]>
M: Vladimir Oltean <[email protected]>
S: Maintained
F: Documentation/devicetree/bindings/net/dsa/
+F: Documentation/devicetree/bindings/net/ethernet-switch-port.yaml
F: Documentation/devicetree/bindings/net/ethernet-switch.yaml
F: drivers/net/dsa/
F: include/linux/dsa/
--
2.25.1
The dsa.yaml binding contains duplicated bindings for address and size
cells, as well as the reference to dsa-port.yaml. Instead of duplicating
this information, remove the reference to dsa-port.yaml and include the
full reference to dsa.yaml.
Signed-off-by: Colin Foster <[email protected]>
Suggested-by: Vladimir Oltean <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
---
v5 -> v7
* No change
v4 -> v5
* Add Rob Reviewed
v3 -> v4
* Add Reviewed tag
* Remove unnecessary blank line deletion
v2 -> v3
* Remove #address-cells and #size-cells from v2. The examples were
incorrect and fixed elsewhere.
* Remove erroneous unevaluatedProperties: true under Ethernet Port.
* Add back ref: dsa-port.yaml#.
v1 -> v2
* Add #address-cells and #size-cells to the switch layer. They aren't
part of dsa.yaml.
* Add unevaluatedProperties: true to the ethernet-port layer so it can
correctly read properties from dsa.yaml.
---
Documentation/devicetree/bindings/net/dsa/qca8k.yaml | 10 +++-------
1 file changed, 3 insertions(+), 7 deletions(-)
diff --git a/Documentation/devicetree/bindings/net/dsa/qca8k.yaml b/Documentation/devicetree/bindings/net/dsa/qca8k.yaml
index 6fc9bc985726..389892592aac 100644
--- a/Documentation/devicetree/bindings/net/dsa/qca8k.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/qca8k.yaml
@@ -66,15 +66,11 @@ properties:
With the legacy mapping the reg corresponding to the internal
mdio is the switch reg with an offset of -1.
+$ref: "dsa.yaml#"
+
patternProperties:
"^(ethernet-)?ports$":
type: object
- properties:
- '#address-cells':
- const: 1
- '#size-cells':
- const: 0
-
patternProperties:
"^(ethernet-)?port@[0-6]$":
type: object
@@ -116,7 +112,7 @@ required:
- compatible
- reg
-additionalProperties: true
+unevaluatedProperties: false
examples:
- |
--
2.25.1
dsa.yaml contains a reference to dsa-port.yaml, so a duplicate reference to
the binding isn't necessary. Remove this unnecessary reference.
Signed-off-by: Colin Foster <[email protected]>
Suggested-by: Vladimir Oltean <[email protected]>
Reviewed-by: Arınç ÜNAL <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
---
v5 -> v7
* No change
v4 -> v5
* Add Rob reviewed tag
v3 -> v4
* Add Florian Reviewed tag
v2 -> v3
* Keep "unevaluatedProperties: false" under the switch ports node.
v1 -> v2
* Add Reviewed-by
---
Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml | 1 -
1 file changed, 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
index 20312f5d1944..08667bff74a5 100644
--- a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
@@ -165,7 +165,6 @@ patternProperties:
for user ports.
allOf:
- - $ref: dsa-port.yaml#
- if:
required: [ ethernet ]
then:
--
2.25.1
The MAINTAINERS file has Andrew Lunn, Florian Fainelli, and Vladimir Oltean
listed as the maintainers for generic dsa bindings. Update dsa.yaml and
dsa-port.yaml accordingly.
Signed-off-by: Colin Foster <[email protected]>
Reviewed-by: Vladimir Oltean <[email protected]>
Acked-by: Rob Herring <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
---
v6 -> v7
* Add Reviewed and Acked
v5 -> v6
* No change
v5
* New patch
---
Documentation/devicetree/bindings/net/dsa/dsa-port.yaml | 2 +-
Documentation/devicetree/bindings/net/dsa/dsa.yaml | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/net/dsa/dsa-port.yaml b/Documentation/devicetree/bindings/net/dsa/dsa-port.yaml
index b173fceb8998..fb338486ce85 100644
--- a/Documentation/devicetree/bindings/net/dsa/dsa-port.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/dsa-port.yaml
@@ -9,7 +9,7 @@ title: Ethernet Switch port
maintainers:
- Andrew Lunn <[email protected]>
- Florian Fainelli <[email protected]>
- - Vivien Didelot <[email protected]>
+ - Vladimir Oltean <[email protected]>
description:
Ethernet switch port Description
diff --git a/Documentation/devicetree/bindings/net/dsa/dsa.yaml b/Documentation/devicetree/bindings/net/dsa/dsa.yaml
index 5469ae8a4389..e189fcc83fc4 100644
--- a/Documentation/devicetree/bindings/net/dsa/dsa.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/dsa.yaml
@@ -9,7 +9,7 @@ title: Ethernet Switch
maintainers:
- Andrew Lunn <[email protected]>
- Florian Fainelli <[email protected]>
- - Vivien Didelot <[email protected]>
+ - Vladimir Oltean <[email protected]>
description:
This binding represents Ethernet Switches which have a dedicated CPU
--
2.25.1
The dsa.yaml bindings had references that can apply to non-dsa switches. To
prevent duplication of this information, keep the dsa-specific information
inside dsa.yaml and move the remaining generic information to the newly
created ethernet-switch.yaml.
Signed-off-by: Colin Foster <[email protected]>
Suggested-by: Vladimir Oltean <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
---
v5 -> v7
* No change
v4 -> v5
* Add Rob Reviewed tag
* Remove "^(ethernet-)?switch(@.*)?$" from dsa.yaml in this patch, instead
of dt-bindings: net: dsa: allow additional ethernet-port properties
* Change Vivien to Vladimir to sync with MAINTAINERS
* Remove quotes around ref: /schemas/net/ethernet-switch.yaml#
v3 -> v4
* Update ethernet-ports and ethernet-port nodes to match what the new
dsa.yaml has. Namely:
"unevaluatedProperties: false" instead of "additionalProperties: true"
"additionalProperties: true" instead of "unevaluatedProperties: true"
for ethernet-ports and ethernet-port, respectively.
* Add Florian Reviewed tag
v2 -> v3
* Change ethernet-switch.yaml title from "Ethernet Switch Device
Tree Bindings" to "Generic Ethernet Switch"
* Rework ethernet-switch.yaml description
* Add base defs structure for switches that don't have any additional
properties.
* Add "additionalProperties: true" under "^(ethernet-)?ports$" node
* Correct port reference from /schemas/net/dsa/dsa-port.yaml# to
ethernet-controller.yaml#
v1 -> v2
* No net change, but deletions from dsa.yaml included the changes for
"addionalProperties: true" under ports and "unevaluatedProperties:
true" under port.
---
.../devicetree/bindings/net/dsa/dsa.yaml | 31 +--------
.../bindings/net/ethernet-switch.yaml | 66 +++++++++++++++++++
MAINTAINERS | 1 +
3 files changed, 69 insertions(+), 29 deletions(-)
create mode 100644 Documentation/devicetree/bindings/net/ethernet-switch.yaml
diff --git a/Documentation/devicetree/bindings/net/dsa/dsa.yaml b/Documentation/devicetree/bindings/net/dsa/dsa.yaml
index 7487ac0d6bb9..8d971813bab6 100644
--- a/Documentation/devicetree/bindings/net/dsa/dsa.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/dsa.yaml
@@ -18,10 +18,9 @@ description:
select: false
-properties:
- $nodename:
- pattern: "^(ethernet-)?switch(@.*)?$"
+$ref: /schemas/net/ethernet-switch.yaml#
+properties:
dsa,member:
minItems: 2
maxItems: 2
@@ -32,32 +31,6 @@ properties:
(single device hanging off a CPU port) must not specify this property
$ref: /schemas/types.yaml#/definitions/uint32-array
-patternProperties:
- "^(ethernet-)?ports$":
- type: object
- properties:
- '#address-cells':
- const: 1
- '#size-cells':
- const: 0
-
- unevaluatedProperties: false
-
- patternProperties:
- "^(ethernet-)?port@[0-9]+$":
- type: object
- description: Ethernet switch ports
-
- $ref: dsa-port.yaml#
-
- additionalProperties: true
-
-oneOf:
- - required:
- - ports
- - required:
- - ethernet-ports
-
additionalProperties: true
$defs:
diff --git a/Documentation/devicetree/bindings/net/ethernet-switch.yaml b/Documentation/devicetree/bindings/net/ethernet-switch.yaml
new file mode 100644
index 000000000000..2466d05f9a6f
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/ethernet-switch.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/ethernet-switch.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic Ethernet Switch
+
+maintainers:
+ - Andrew Lunn <[email protected]>
+ - Florian Fainelli <[email protected]>
+ - Vladimir Oltean <[email protected]>
+
+description:
+ Ethernet switches are multi-port Ethernet controllers. Each port has
+ its own number and is represented as its own Ethernet controller.
+ The minimum required functionality is to pass packets to software.
+ They may or may not be able to forward packets automonously between
+ ports.
+
+select: false
+
+properties:
+ $nodename:
+ pattern: "^(ethernet-)?switch(@.*)?$"
+
+patternProperties:
+ "^(ethernet-)?ports$":
+ type: object
+ unevaluatedProperties: false
+
+ properties:
+ '#address-cells':
+ const: 1
+ '#size-cells':
+ const: 0
+
+ patternProperties:
+ "^(ethernet-)?port@[0-9]+$":
+ type: object
+ description: Ethernet switch ports
+
+ $ref: ethernet-controller.yaml#
+
+ additionalProperties: true
+
+oneOf:
+ - required:
+ - ports
+ - required:
+ - ethernet-ports
+
+additionalProperties: true
+
+$defs:
+ base:
+ description: An ethernet switch without any extra port properties
+ $ref: '#/'
+
+ patternProperties:
+ "^(ethernet-)?port@[0-9]+$":
+ description: Ethernet switch ports
+ $ref: ethernet-controller.yaml#
+ unevaluatedProperties: false
+
+...
diff --git a/MAINTAINERS b/MAINTAINERS
index d346d586ea1a..b582e0835b46 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -14542,6 +14542,7 @@ M: Florian Fainelli <[email protected]>
M: Vladimir Oltean <[email protected]>
S: Maintained
F: Documentation/devicetree/bindings/net/dsa/
+F: Documentation/devicetree/bindings/net/ethernet-switch.yaml
F: drivers/net/dsa/
F: include/linux/dsa/
F: include/linux/platform_data/dsa.h
--
2.25.1
Several bindings for ethernet switches are available for non-dsa switches
by way of ethernet-switch.yaml. Remove these duplicate entries and utilize
the common bindings for the VSC7514.
Signed-off-by: Colin Foster <[email protected]>
Suggested-by: Vladimir Oltean <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
---
v5 -> v7
* No change
v4 -> v5
* Add Rob Reviewed tag
v3 -> v4
* Add Florian Reviewed tag
v2 -> v3:
* Reference ethernet-switch-port.yaml# instead of ethernet-controller
* Undo the addition of "unevaluatedProperties: true" from v2. Those
were only added because of my misunderstandings.
* Keep #address-cells and #size-cells in the ports node.
v1 -> v2:
* Fix "$ref: ethernet-switch.yaml" placement. Oops.
* Add "unevaluatedProperties: true" to ethernet-ports layer so it
can correctly read into ethernet-switch.yaml
* Add "unevaluatedProperties: true" to ethernet-port layer so it can
correctly read into ethernet-controller.yaml
---
.../bindings/net/mscc,vsc7514-switch.yaml | 31 ++-----------------
1 file changed, 3 insertions(+), 28 deletions(-)
diff --git a/Documentation/devicetree/bindings/net/mscc,vsc7514-switch.yaml b/Documentation/devicetree/bindings/net/mscc,vsc7514-switch.yaml
index ee0a504bdb24..5ffe831e59e4 100644
--- a/Documentation/devicetree/bindings/net/mscc,vsc7514-switch.yaml
+++ b/Documentation/devicetree/bindings/net/mscc,vsc7514-switch.yaml
@@ -18,10 +18,9 @@ description: |
packets using CPU. Additionally, PTP is supported as well as FDMA for faster
packet extraction/injection.
-properties:
- $nodename:
- pattern: "^switch@[0-9a-f]+$"
+$ref: ethernet-switch.yaml#
+properties:
compatible:
const: mscc,vsc7514-switch
@@ -100,35 +99,11 @@ properties:
patternProperties:
"^port@[0-9a-f]+$":
- type: object
- description: Ethernet ports handled by the switch
- $ref: ethernet-controller.yaml#
+ $ref: ethernet-switch-port.yaml#
unevaluatedProperties: false
- properties:
- reg:
- description: Switch port number
-
- phy-handle: true
-
- phy-mode: true
-
- fixed-link: true
-
- mac-address: true
-
- required:
- - reg
- - phy-mode
-
- oneOf:
- - required:
- - phy-handle
- - required:
- - fixed-link
-
required:
- compatible
- reg
--
2.25.1
The children of the switch node don't have a unit address, and therefore
should not need the #address-cells or #size-cells entries. Fix the example
schemas accordingly.
Suggested-by: Vladimir Oltean <[email protected]>
Signed-off-by: Colin Foster <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
---
v4 -> v7
* No change
v3 -> v4
* Add Reviewed tags
v3
* New patch
---
Documentation/devicetree/bindings/net/dsa/qca8k.yaml | 4 ----
1 file changed, 4 deletions(-)
diff --git a/Documentation/devicetree/bindings/net/dsa/qca8k.yaml b/Documentation/devicetree/bindings/net/dsa/qca8k.yaml
index 978162df51f7..6fc9bc985726 100644
--- a/Documentation/devicetree/bindings/net/dsa/qca8k.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/qca8k.yaml
@@ -148,8 +148,6 @@ examples:
switch@10 {
compatible = "qca,qca8337";
- #address-cells = <1>;
- #size-cells = <0>;
reset-gpios = <&gpio 42 GPIO_ACTIVE_LOW>;
reg = <0x10>;
@@ -209,8 +207,6 @@ examples:
switch@10 {
compatible = "qca,qca8337";
- #address-cells = <1>;
- #size-cells = <0>;
reset-gpios = <&gpio 42 GPIO_ACTIVE_LOW>;
reg = <0x10>;
--
2.25.1
DSA switches can fall into one of two categories: switches where all ports
follow standard '(ethernet-)?port' properties, and switches that have
additional properties for the ports.
The scenario where DSA ports are all standardized can be handled by
switches with a reference to the new 'dsa.yaml#/$defs/ethernet-ports'.
The scenario where DSA ports require additional properties can reference
'$dsa.yaml#' directly. This will allow switches to reference these standard
definitions of the DSA switch, but add additional properties under the port
nodes.
Suggested-by: Rob Herring <[email protected]>
Signed-off-by: Colin Foster <[email protected]>
Reviewed-by: Linus Walleij <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
Acked-by: Alvin Šipraga <[email protected]> # realtek
Acked-by: Arınç ÜNAL <[email protected]>
---
v5 -> v7
* No change
v4 -> v5
* Add Rob Reviewed, Arınç Acked
* Defer the removal of "^(ethernet-)?switch(@.*)?$" in dsa.yaml until a
later patch
* Undo the move of ethernet switch ports description in mediatek,mt7530.yaml
* Fix typos in commit message
v3 -> v4
* Rename "$defs/base" to "$defs/ethernet-ports" to avoid implication of a
"base class" and fix commit message accordingly
* Add the following to the common etherent-ports node:
"additionalProperties: false"
"#address-cells" property
"#size-cells" property
* Fix "etherenet-ports@[0-9]+" to correctly be "ethernet-port@[0-9]+"
* Remove unnecessary newline
* Apply changes to mediatek,mt7530.yaml that were previously in a separate patch
* Add Reviewed and Acked tags
v3
* New patch
---
.../bindings/net/dsa/arrow,xrs700x.yaml | 2 +-
.../devicetree/bindings/net/dsa/brcm,b53.yaml | 2 +-
.../devicetree/bindings/net/dsa/dsa.yaml | 22 +++++++++++++++++++
.../net/dsa/hirschmann,hellcreek.yaml | 2 +-
.../bindings/net/dsa/mediatek,mt7530.yaml | 5 +----
.../bindings/net/dsa/microchip,ksz.yaml | 2 +-
.../bindings/net/dsa/microchip,lan937x.yaml | 2 +-
.../bindings/net/dsa/mscc,ocelot.yaml | 2 +-
.../bindings/net/dsa/nxp,sja1105.yaml | 2 +-
.../devicetree/bindings/net/dsa/realtek.yaml | 2 +-
.../bindings/net/dsa/renesas,rzn1-a5psw.yaml | 2 +-
11 files changed, 32 insertions(+), 13 deletions(-)
diff --git a/Documentation/devicetree/bindings/net/dsa/arrow,xrs700x.yaml b/Documentation/devicetree/bindings/net/dsa/arrow,xrs700x.yaml
index 2a6d126606ca..9565a7402146 100644
--- a/Documentation/devicetree/bindings/net/dsa/arrow,xrs700x.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/arrow,xrs700x.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
title: Arrow SpeedChips XRS7000 Series Switch
allOf:
- - $ref: dsa.yaml#
+ - $ref: dsa.yaml#/$defs/ethernet-ports
maintainers:
- George McCollister <[email protected]>
diff --git a/Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml b/Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml
index 1219b830b1a4..5bef4128d175 100644
--- a/Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml
@@ -66,7 +66,7 @@ required:
- reg
allOf:
- - $ref: dsa.yaml#
+ - $ref: dsa.yaml#/$defs/ethernet-ports
- if:
properties:
compatible:
diff --git a/Documentation/devicetree/bindings/net/dsa/dsa.yaml b/Documentation/devicetree/bindings/net/dsa/dsa.yaml
index e189fcc83fc4..efaa94cb89ae 100644
--- a/Documentation/devicetree/bindings/net/dsa/dsa.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/dsa.yaml
@@ -58,4 +58,26 @@ oneOf:
additionalProperties: true
+$defs:
+ ethernet-ports:
+ description: A DSA switch without any extra port properties
+ $ref: '#/'
+
+ patternProperties:
+ "^(ethernet-)?ports$":
+ type: object
+ additionalProperties: false
+
+ properties:
+ '#address-cells':
+ const: 1
+ '#size-cells':
+ const: 0
+
+ patternProperties:
+ "^(ethernet-)?port@[0-9]+$":
+ description: Ethernet switch ports
+ $ref: dsa-port.yaml#
+ unevaluatedProperties: false
+
...
diff --git a/Documentation/devicetree/bindings/net/dsa/hirschmann,hellcreek.yaml b/Documentation/devicetree/bindings/net/dsa/hirschmann,hellcreek.yaml
index 447589b01e8e..4021b054f684 100644
--- a/Documentation/devicetree/bindings/net/dsa/hirschmann,hellcreek.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/hirschmann,hellcreek.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
title: Hirschmann Hellcreek TSN Switch
allOf:
- - $ref: dsa.yaml#
+ - $ref: dsa.yaml#/$defs/ethernet-ports
maintainers:
- Andrew Lunn <[email protected]>
diff --git a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
index f2e9ff3f580b..20312f5d1944 100644
--- a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
@@ -157,9 +157,6 @@ patternProperties:
patternProperties:
"^(ethernet-)?port@[0-9]+$":
type: object
- description: Ethernet switch ports
-
- unevaluatedProperties: false
properties:
reg:
@@ -238,7 +235,7 @@ $defs:
- sgmii
allOf:
- - $ref: dsa.yaml#
+ - $ref: dsa.yaml#/$defs/ethernet-ports
- if:
required:
- mediatek,mcm
diff --git a/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml b/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml
index 4da75b1f9533..a4b53434c85c 100644
--- a/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml
@@ -11,7 +11,7 @@ maintainers:
- Woojung Huh <[email protected]>
allOf:
- - $ref: dsa.yaml#
+ - $ref: dsa.yaml#/$defs/ethernet-ports
- $ref: /schemas/spi/spi-peripheral-props.yaml#
properties:
diff --git a/Documentation/devicetree/bindings/net/dsa/microchip,lan937x.yaml b/Documentation/devicetree/bindings/net/dsa/microchip,lan937x.yaml
index b34de303966b..8d7e878b84dc 100644
--- a/Documentation/devicetree/bindings/net/dsa/microchip,lan937x.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/microchip,lan937x.yaml
@@ -10,7 +10,7 @@ maintainers:
- [email protected]
allOf:
- - $ref: dsa.yaml#
+ - $ref: dsa.yaml#/$defs/ethernet-ports
properties:
compatible:
diff --git a/Documentation/devicetree/bindings/net/dsa/mscc,ocelot.yaml b/Documentation/devicetree/bindings/net/dsa/mscc,ocelot.yaml
index 347a0e1b3d3f..fe02d05196e4 100644
--- a/Documentation/devicetree/bindings/net/dsa/mscc,ocelot.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/mscc,ocelot.yaml
@@ -78,7 +78,7 @@ required:
- reg
allOf:
- - $ref: dsa.yaml#
+ - $ref: dsa.yaml#/$defs/ethernet-ports
- if:
properties:
compatible:
diff --git a/Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml b/Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml
index df98a16e4e75..9a64ed658745 100644
--- a/Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml
@@ -13,7 +13,7 @@ description:
depends on the SPI bus master driver.
allOf:
- - $ref: "dsa.yaml#"
+ - $ref: dsa.yaml#/$defs/ethernet-ports
- $ref: /schemas/spi/spi-peripheral-props.yaml#
maintainers:
diff --git a/Documentation/devicetree/bindings/net/dsa/realtek.yaml b/Documentation/devicetree/bindings/net/dsa/realtek.yaml
index 1a7d45a8ad66..cfd69c2604ea 100644
--- a/Documentation/devicetree/bindings/net/dsa/realtek.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/realtek.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
title: Realtek switches for unmanaged switches
allOf:
- - $ref: dsa.yaml#
+ - $ref: dsa.yaml#/$defs/ethernet-ports
maintainers:
- Linus Walleij <[email protected]>
diff --git a/Documentation/devicetree/bindings/net/dsa/renesas,rzn1-a5psw.yaml b/Documentation/devicetree/bindings/net/dsa/renesas,rzn1-a5psw.yaml
index 0a0d62b6c00e..833d2f68daa1 100644
--- a/Documentation/devicetree/bindings/net/dsa/renesas,rzn1-a5psw.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/renesas,rzn1-a5psw.yaml
@@ -14,7 +14,7 @@ description: |
handles 4 ports + 1 CPU management port.
allOf:
- - $ref: dsa.yaml#
+ - $ref: dsa.yaml#/$defs/ethernet-ports
properties:
compatible:
--
2.25.1
I saw on Patchwork I'd missed Krzysztof's CC. Apologies - I missed it
in a copy-paste error.
On Thu, Jan 12, 2023 at 07:56:03AM -1000, Colin Foster wrote:
> Ocelot switches have the abilitiy to be used internally via
> memory-mapped IO or externally via SPI or PCIe. This brings up issues
> for documentation, where the same chip might be accessed internally in a
> switchdev manner, or externally in a DSA configuration. This patch set
> is perparation to bring DSA functionality to the VSC7512, utilizing as
> much as possible with an almost identical VSC7514 chip.
>
> This patch set changed quite a bit from v2, so I'll omit the background
> of how those sets came to be. Rob offered a lot of very useful guidance.
> My thanks.
>
> At the end of the day, with this patch set, there should be a framework
> to document Ocelot switches (and any switch) in scenarios where they can
> be controlled internally (ethernet-switch) or externally (dsa-switch).
>
> ---
>
> v6 -> v7
> * Add Reviewed / Acked on patch 1
> * Clean up descriptions on Ethernet / DSA switch port bindings
>
> v5 -> v6
> * Rebase so it applies to net-next cleanly.
> * No other changes - during the last submission round I said I'd
> submit v6 with a change to move $dsa-port.yaml to outside the allOf
> list. In retrospect that wasn't the right thing to do, because later
> in the patch series the $dsa-port.yaml is removed outright. So I
> believe the submission in v5 to keep "type: object" was correct.
>
> v4 -> v5
> * Sync DSA maintainers with MAINTAINERS file (new patch 1)
> * Undo move of port description of mediatek,mt7530.yaml (patch 4)
> * Move removal of "^(ethernet-)?switch(@.*)?$" in dsa.yaml from patch 4
> to patch 8
> * Add more consistent capitalization in title lines and better Ethernet
> switch port description. (patch 8)
>
> v3 -> v4
> * Renamed "base" to "ethernet-ports" to avoid confusion with the concept
> of a base class.
> * Squash ("dt-bindings: net: dsa: mediatek,mt7530: fix port description location")
> patch into ("dt-bindings: net: dsa: utilize base definitions for standard dsa
> switches")
> * Corrections to fix confusion about additonalProperties vs unevaluatedProperties.
> See specific patches for details.
>
> v2 -> v3
> * Restructured everything to use a "base" iref for devices that don't
> have additional properties, and simply a "ref" for devices that do.
> * New patches to fix up brcm,sf2, qca8k, and mt7530
> * Fix unevaluatedProperties errors from previous sets (see specific
> patches for more detail)
> * Removed redundant "Device Tree Binding" from titles, where applicable.
>
> v1 -> v2
> * Two MFD patches were brought into the MFD tree, so are dropped
> * Add first patch 1/6 to allow DSA devices to add ports and port
> properties
> * Test qca8k against new dt-bindings and fix warnings. (patch 2/6)
> * Add tags (patch 3/6)
> * Fix vsc7514 refs and properties
>
> ---
>
> Colin Foster (10):
> dt-bindings: dsa: sync with maintainers
> dt-bindings: net: dsa: sf2: fix brcm,use-bcm-hdr documentation
> dt-bindings: net: dsa: qca8k: remove address-cells and size-cells from
> switch node
> dt-bindings: net: dsa: utilize base definitions for standard dsa
> switches
> dt-bindings: net: dsa: allow additional ethernet-port properties
> dt-bindings: net: dsa: qca8k: utilize shared dsa.yaml
> dt-bindings: net: dsa: mediatek,mt7530: remove unnecessary dsa-port
> reference
> dt-bindings: net: add generic ethernet-switch
> dt-bindings: net: add generic ethernet-switch-port binding
> dt-bindings: net: mscc,vsc7514-switch: utilize generic
> ethernet-switch.yaml
>
> .../bindings/net/dsa/arrow,xrs700x.yaml | 2 +-
> .../devicetree/bindings/net/dsa/brcm,b53.yaml | 2 +-
> .../devicetree/bindings/net/dsa/brcm,sf2.yaml | 15 +++--
> .../devicetree/bindings/net/dsa/dsa-port.yaml | 30 ++-------
> .../devicetree/bindings/net/dsa/dsa.yaml | 49 +++++++--------
> .../net/dsa/hirschmann,hellcreek.yaml | 2 +-
> .../bindings/net/dsa/mediatek,mt7530.yaml | 6 +-
> .../bindings/net/dsa/microchip,ksz.yaml | 2 +-
> .../bindings/net/dsa/microchip,lan937x.yaml | 2 +-
> .../bindings/net/dsa/mscc,ocelot.yaml | 2 +-
> .../bindings/net/dsa/nxp,sja1105.yaml | 2 +-
> .../devicetree/bindings/net/dsa/qca8k.yaml | 14 +----
> .../devicetree/bindings/net/dsa/realtek.yaml | 2 +-
> .../bindings/net/dsa/renesas,rzn1-a5psw.yaml | 2 +-
> .../bindings/net/ethernet-switch-port.yaml | 26 ++++++++
> .../bindings/net/ethernet-switch.yaml | 62 +++++++++++++++++++
> .../bindings/net/mscc,vsc7514-switch.yaml | 31 +---------
> MAINTAINERS | 2 +
> 18 files changed, 145 insertions(+), 108 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/net/ethernet-switch-port.yaml
> create mode 100644 Documentation/devicetree/bindings/net/ethernet-switch.yaml
>
> --
> 2.25.1
>
Hello:
This series was applied to netdev/net-next.git (master)
by David S. Miller <[email protected]>:
On Thu, 12 Jan 2023 07:56:03 -1000 you wrote:
> Ocelot switches have the abilitiy to be used internally via
> memory-mapped IO or externally via SPI or PCIe. This brings up issues
> for documentation, where the same chip might be accessed internally in a
> switchdev manner, or externally in a DSA configuration. This patch set
> is perparation to bring DSA functionality to the VSC7512, utilizing as
> much as possible with an almost identical VSC7514 chip.
>
> [...]
Here is the summary with links:
- [v7,net-next,01/10] dt-bindings: dsa: sync with maintainers
https://git.kernel.org/netdev/net-next/c/4015dfce2fe7
- [v7,net-next,02/10] dt-bindings: net: dsa: sf2: fix brcm,use-bcm-hdr documentation
https://git.kernel.org/netdev/net-next/c/afdc0aab4972
- [v7,net-next,03/10] dt-bindings: net: dsa: qca8k: remove address-cells and size-cells from switch node
https://git.kernel.org/netdev/net-next/c/54890925f2a4
- [v7,net-next,04/10] dt-bindings: net: dsa: utilize base definitions for standard dsa switches
https://git.kernel.org/netdev/net-next/c/3cec368a8bec
- [v7,net-next,05/10] dt-bindings: net: dsa: allow additional ethernet-port properties
https://git.kernel.org/netdev/net-next/c/16401cdb08f0
- [v7,net-next,06/10] dt-bindings: net: dsa: qca8k: utilize shared dsa.yaml
https://git.kernel.org/netdev/net-next/c/956826446e3a
- [v7,net-next,07/10] dt-bindings: net: dsa: mediatek,mt7530: remove unnecessary dsa-port reference
https://git.kernel.org/netdev/net-next/c/000bd2af9dce
- [v7,net-next,08/10] dt-bindings: net: add generic ethernet-switch
https://git.kernel.org/netdev/net-next/c/7f5bccc8b6f8
- [v7,net-next,09/10] dt-bindings: net: add generic ethernet-switch-port binding
https://git.kernel.org/netdev/net-next/c/68e3e3be66bc
- [v7,net-next,10/10] dt-bindings: net: mscc,vsc7514-switch: utilize generic ethernet-switch.yaml
https://git.kernel.org/netdev/net-next/c/1f4d4ad677c4
You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html
On Mon, Jan 16, 2023 at 06:50:18PM +0000, [email protected] wrote:
> Hello:
>
> This series was applied to netdev/net-next.git (master)
> by David S. Miller <[email protected]>:
Thanks David, and everyone who helped in this series!
>
> On Thu, 12 Jan 2023 07:56:03 -1000 you wrote:
> > Ocelot switches have the abilitiy to be used internally via
> > memory-mapped IO or externally via SPI or PCIe. This brings up issues
> > for documentation, where the same chip might be accessed internally in a
> > switchdev manner, or externally in a DSA configuration. This patch set
> > is perparation to bring DSA functionality to the VSC7512, utilizing as
> > much as possible with an almost identical VSC7514 chip.
> >
> > [...]
>
> Here is the summary with links:
> - [v7,net-next,01/10] dt-bindings: dsa: sync with maintainers
> https://git.kernel.org/netdev/net-next/c/4015dfce2fe7
> - [v7,net-next,02/10] dt-bindings: net: dsa: sf2: fix brcm,use-bcm-hdr documentation
> https://git.kernel.org/netdev/net-next/c/afdc0aab4972
> - [v7,net-next,03/10] dt-bindings: net: dsa: qca8k: remove address-cells and size-cells from switch node
> https://git.kernel.org/netdev/net-next/c/54890925f2a4
> - [v7,net-next,04/10] dt-bindings: net: dsa: utilize base definitions for standard dsa switches
> https://git.kernel.org/netdev/net-next/c/3cec368a8bec
> - [v7,net-next,05/10] dt-bindings: net: dsa: allow additional ethernet-port properties
> https://git.kernel.org/netdev/net-next/c/16401cdb08f0
> - [v7,net-next,06/10] dt-bindings: net: dsa: qca8k: utilize shared dsa.yaml
> https://git.kernel.org/netdev/net-next/c/956826446e3a
> - [v7,net-next,07/10] dt-bindings: net: dsa: mediatek,mt7530: remove unnecessary dsa-port reference
> https://git.kernel.org/netdev/net-next/c/000bd2af9dce
> - [v7,net-next,08/10] dt-bindings: net: add generic ethernet-switch
> https://git.kernel.org/netdev/net-next/c/7f5bccc8b6f8
> - [v7,net-next,09/10] dt-bindings: net: add generic ethernet-switch-port binding
> https://git.kernel.org/netdev/net-next/c/68e3e3be66bc
> - [v7,net-next,10/10] dt-bindings: net: mscc,vsc7514-switch: utilize generic ethernet-switch.yaml
> https://git.kernel.org/netdev/net-next/c/1f4d4ad677c4
>
> You are awesome, thank you!
> --
> Deet-doot-dot, I am a bot.
> https://korg.docs.kernel.org/patchwork/pwbot.html
>
>