2023-01-13 03:48:15

by Clark Wang

Subject: [PATCH V2 7/7] arm64: dts: imx93-11x11-evk: enable fec function

Enable FEC function for imx93-11x11-evk board.

Signed-off-by: Clark Wang <[email protected]>
---
New patch added in V2 for FEC
---
.../boot/dts/freescale/imx93-11x11-evk.dts | 39 +++++++++++++++++++
1 file changed, 39 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts b/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
index 6f7f1974cbb7..cdcc5093c763 100644
--- a/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
@@ -55,6 +55,26 @@ ethphy1: ethernet-phy@1 {
};
};

+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec>;
+ phy-mode = "rgmii-id";
+ phy-handle = <&ethphy2>;
+ fsl,magic-packet;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-frequency = <5000000>;
+
+ ethphy2: ethernet-phy@2 {
+ reg = <2>;
+ eee-broken-1000t;
+ };
+ };
+};
+
&lpuart1 { /* console */
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
@@ -104,6 +124,25 @@ MX93_PAD_ENET1_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x57e
>;
};

+ pinctrl_fec: fecgrp {
+ fsl,pins = <
+ MX93_PAD_ENET2_MDC__ENET1_MDC 0x57e
+ MX93_PAD_ENET2_MDIO__ENET1_MDIO 0x57e
+ MX93_PAD_ENET2_RD0__ENET1_RGMII_RD0 0x57e
+ MX93_PAD_ENET2_RD1__ENET1_RGMII_RD1 0x57e
+ MX93_PAD_ENET2_RD2__ENET1_RGMII_RD2 0x57e
+ MX93_PAD_ENET2_RD3__ENET1_RGMII_RD3 0x57e
+ MX93_PAD_ENET2_RXC__ENET1_RGMII_RXC 0x5fe
+ MX93_PAD_ENET2_RX_CTL__ENET1_RGMII_RX_CTL 0x57e
+ MX93_PAD_ENET2_TD0__ENET1_RGMII_TD0 0x57e
+ MX93_PAD_ENET2_TD1__ENET1_RGMII_TD1 0x57e
+ MX93_PAD_ENET2_TD2__ENET1_RGMII_TD2 0x57e
+ MX93_PAD_ENET2_TD3__ENET1_RGMII_TD3 0x57e
+ MX93_PAD_ENET2_TXC__ENET1_RGMII_TXC 0x5fe
+ MX93_PAD_ENET2_TX_CTL__ENET1_RGMII_TX_CTL 0x57e
+ >;
+ };
+
pinctrl_uart1: uart1grp {
fsl,pins = <
MX93_PAD_UART1_RXD__LPUART1_RX 0x31e
--
2.34.1

2023-01-16 01:03:37

by Peng Fan (OSS)

Subject: Re: [PATCH V2 7/7] arm64: dts: imx93-11x11-evk: enable fec function

On 1/13/2023 11:33 AM, Clark Wang wrote:
> Enable FEC function for imx93-11x11-evk board.
>
> Signed-off-by: Clark Wang <[email protected]>

Reviewed-by: Peng Fan <[email protected]>

> ---
> New patch added in V2 for FEC
> ---
> .../boot/dts/freescale/imx93-11x11-evk.dts | 39 +++++++++++++++++++
> 1 file changed, 39 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts b/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
> index 6f7f1974cbb7..cdcc5093c763 100644
> --- a/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
> +++ b/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
> @@ -55,6 +55,26 @@ ethphy1: ethernet-phy@1 {
> };
> };
>
> +&fec {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_fec>;
> + phy-mode = "rgmii-id";
> + phy-handle = <&ethphy2>;
> + fsl,magic-packet;
> + status = "okay";
> +
> + mdio {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + clock-frequency = <5000000>;
> +
> + ethphy2: ethernet-phy@2 {
> + reg = <2>;
> + eee-broken-1000t;
> + };
> + };
> +};
> +
> &lpuart1 { /* console */
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_uart1>;
> @@ -104,6 +124,25 @@ MX93_PAD_ENET1_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x57e
> >;
> };
>
> + pinctrl_fec: fecgrp {
> + fsl,pins = <
> + MX93_PAD_ENET2_MDC__ENET1_MDC 0x57e
> + MX93_PAD_ENET2_MDIO__ENET1_MDIO 0x57e
> + MX93_PAD_ENET2_RD0__ENET1_RGMII_RD0 0x57e
> + MX93_PAD_ENET2_RD1__ENET1_RGMII_RD1 0x57e
> + MX93_PAD_ENET2_RD2__ENET1_RGMII_RD2 0x57e
> + MX93_PAD_ENET2_RD3__ENET1_RGMII_RD3 0x57e
> + MX93_PAD_ENET2_RXC__ENET1_RGMII_RXC 0x5fe
> + MX93_PAD_ENET2_RX_CTL__ENET1_RGMII_RX_CTL 0x57e
> + MX93_PAD_ENET2_TD0__ENET1_RGMII_TD0 0x57e
> + MX93_PAD_ENET2_TD1__ENET1_RGMII_TD1 0x57e
> + MX93_PAD_ENET2_TD2__ENET1_RGMII_TD2 0x57e
> + MX93_PAD_ENET2_TD3__ENET1_RGMII_TD3 0x57e
> + MX93_PAD_ENET2_TXC__ENET1_RGMII_TXC 0x5fe
> + MX93_PAD_ENET2_TX_CTL__ENET1_RGMII_TX_CTL 0x57e
> + >;
> + };
> +
> pinctrl_uart1: uart1grp {
> fsl,pins = <
> MX93_PAD_UART1_RXD__LPUART1_RX 0x31e