Hi,
This is the v7 of the patch series to add PWM and keyboard backlight
driver for ARM macs. No significant changes this time.
Here is hoping that this time, the paint on this shed is up
to everyone's standards.
Changes in v1:
Addressing the review comments.
Changes in v2:
Added the reviewed-by and acked-by tags.
Addressing a review comment.
Changes in v3 and v4:
Addressing the review comments.
Changes in v5:
Added t600x device tree changes
v1: https://www.spinics.net/lists/linux-pwm/msg19500.html
v2: https://www.spinics.net/lists/linux-pwm/msg19562.html
v3: https://www.spinics.net/lists/linux-pwm/msg19901.html
v4: https://www.spinics.net/lists/linux-pwm/msg20093.html
v5: https://www.spinics.net/lists/linux-pwm/msg20150.html
v6: https://www.spinics.net/lists/linux-pwm/msg20190.html
Sasha Finkelstein (5):
dt-bindings: pwm: Add Apple PWM controller
pwm: Add Apple PWM controller
arm64: dts: apple: t8103: Add PWM controller
arm64: dts: apple: t600x: Add PWM controller
MAINTAINERS: Add entries for Apple PWM driver
.../bindings/pwm/apple,s5l-fpwm.yaml | 51 ++++++
MAINTAINERS | 2 +
arch/arm64/boot/dts/apple/t600x-die0.dtsi | 9 +
.../arm64/boot/dts/apple/t600x-j314-j316.dtsi | 18 ++
arch/arm64/boot/dts/apple/t8103-j293.dts | 17 ++
arch/arm64/boot/dts/apple/t8103-j313.dts | 17 ++
arch/arm64/boot/dts/apple/t8103.dtsi | 9 +
drivers/pwm/Kconfig | 12 ++
drivers/pwm/Makefile | 1 +
drivers/pwm/pwm-apple.c | 159 ++++++++++++++++++
10 files changed, 295 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pwm/apple,s5l-fpwm.yaml
create mode 100644 drivers/pwm/pwm-apple.c
--
2.37.1 (Apple Git-137.1)
From: Sasha Finkelstein <[email protected]>
Adds PWM controller and keyboard backlight bindings for M1 Pro/Max MacBook Pros
Signed-off-by: Sasha Finkelstein <[email protected]>
Acked-by: Hector Martin <[email protected]>
---
arch/arm64/boot/dts/apple/t600x-die0.dtsi | 9 +++++++++
arch/arm64/boot/dts/apple/t600x-j314-j316.dtsi | 18 ++++++++++++++++++
2 files changed, 27 insertions(+)
diff --git a/arch/arm64/boot/dts/apple/t600x-die0.dtsi b/arch/arm64/boot/dts/apple/t600x-die0.dtsi
index 1c41954e3899..9157ae2a9f7f 100644
--- a/arch/arm64/boot/dts/apple/t600x-die0.dtsi
+++ b/arch/arm64/boot/dts/apple/t600x-die0.dtsi
@@ -71,6 +71,15 @@ sio_dart_1: iommu@39b008000 {
power-domains = <&ps_sio_cpu>;
};
+ fpwm0: pwm@39b030000 {
+ compatible = "apple,t6000-fpwm", "apple,s5l-fpwm";
+ reg = <0x3 0x9b030000 0x0 0x4000>;
+ power-domains = <&ps_fpwm0>;
+ clocks = <&clkref>;
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
i2c0: i2c@39b040000 {
compatible = "apple,t6000-i2c", "apple,i2c";
reg = <0x3 0x9b040000 0x0 0x4000>;
diff --git a/arch/arm64/boot/dts/apple/t600x-j314-j316.dtsi b/arch/arm64/boot/dts/apple/t600x-j314-j316.dtsi
index 34906d522f0a..96de7165df6d 100644
--- a/arch/arm64/boot/dts/apple/t600x-j314-j316.dtsi
+++ b/arch/arm64/boot/dts/apple/t600x-j314-j316.dtsi
@@ -9,6 +9,8 @@
* Copyright The Asahi Linux Contributors
*/
+#include <dt-bindings/leds/common.h>
+
/ {
aliases {
serial0 = &serial0;
@@ -34,6 +36,18 @@ memory@10000000000 {
device_type = "memory";
reg = <0x100 0 0x2 0>; /* To be filled by loader */
};
+
+ led-controller {
+ compatible = "pwm-leds";
+ led-0 {
+ pwms = <&fpwm0 0 40000>;
+ label = "kbd_backlight";
+ function = LED_FUNCTION_KBD_BACKLIGHT;
+ color = <LED_COLOR_ID_WHITE>;
+ max-brightness = <255>;
+ default-state = "keep";
+ };
+ };
};
&serial0 {
@@ -110,5 +124,9 @@ &pcie0_dart_3 {
status = "disabled";
};
+&fpwm0 {
+ status = "okay";
+};
+
/delete-node/ &port02;
/delete-node/ &port03;
--
2.37.1 (Apple Git-137.1)
Apple SoCs such as the M1 contain a PWM controller used
among other things to control the keyboard backlight.
Signed-off-by: Sasha Finkelstein <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Acked-by: Sven Peter <[email protected]>
---
.../bindings/pwm/apple,s5l-fpwm.yaml | 51 +++++++++++++++++++
1 file changed, 51 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pwm/apple,s5l-fpwm.yaml
diff --git a/Documentation/devicetree/bindings/pwm/apple,s5l-fpwm.yaml b/Documentation/devicetree/bindings/pwm/apple,s5l-fpwm.yaml
new file mode 100644
index 000000000000..142157bff0cd
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/apple,s5l-fpwm.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pwm/apple,s5l-fpwm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Apple FPWM controller
+
+maintainers:
+ - [email protected]
+ - Sasha Finkelstein <[email protected]>
+
+description: PWM controller used for keyboard backlight on ARM Macs
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - apple,t8103-fpwm
+ - apple,t6000-fpwm
+ - apple,t8112-fpwm
+ - const: apple,s5l-fpwm
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ power-domains:
+ maxItems: 1
+
+ "#pwm-cells":
+ const: 2
+
+required:
+ - compatible
+ - reg
+ - clocks
+
+additionalProperties: false
+
+examples:
+ - |
+ pwm@235044000 {
+ compatible = "apple,t8103-fpwm", "apple,s5l-fpwm";
+ reg = <0x35044000 0x4000>;
+ power-domains = <&ps_fpwm1>;
+ clocks = <&clkref>;
+ #pwm-cells = <2>;
+ };
--
2.37.1 (Apple Git-137.1)
Adds the Apple PWM controller driver.
Signed-off-by: Sasha Finkelstein <[email protected]>
Acked-by: Sven Peter <[email protected]>
---
drivers/pwm/Kconfig | 12 +++
drivers/pwm/Makefile | 1 +
drivers/pwm/pwm-apple.c | 159 ++++++++++++++++++++++++++++++++++++++++
3 files changed, 172 insertions(+)
create mode 100644 drivers/pwm/pwm-apple.c
diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
index dae023d783a2..8df861b1f4a3 100644
--- a/drivers/pwm/Kconfig
+++ b/drivers/pwm/Kconfig
@@ -51,6 +51,18 @@ config PWM_AB8500
To compile this driver as a module, choose M here: the module
will be called pwm-ab8500.
+config PWM_APPLE
+ tristate "Apple SoC PWM support"
+ depends on ARCH_APPLE || COMPILE_TEST
+ help
+ Generic PWM framework driver for PWM controller present on
+ Apple SoCs
+
+ Say Y here if you have an ARM Apple laptop, otherwise say N
+
+ To compile this driver as a module, choose M here: the module
+ will be called pwm-apple.
+
config PWM_ATMEL
tristate "Atmel PWM support"
depends on ARCH_AT91 || COMPILE_TEST
diff --git a/drivers/pwm/Makefile b/drivers/pwm/Makefile
index 7bf1a29f02b8..19899b912e00 100644
--- a/drivers/pwm/Makefile
+++ b/drivers/pwm/Makefile
@@ -2,6 +2,7 @@
obj-$(CONFIG_PWM) += core.o
obj-$(CONFIG_PWM_SYSFS) += sysfs.o
obj-$(CONFIG_PWM_AB8500) += pwm-ab8500.o
+obj-$(CONFIG_PWM_APPLE) += pwm-apple.o
obj-$(CONFIG_PWM_ATMEL) += pwm-atmel.o
obj-$(CONFIG_PWM_ATMEL_HLCDC_PWM) += pwm-atmel-hlcdc.o
obj-$(CONFIG_PWM_ATMEL_TCB) += pwm-atmel-tcb.o
diff --git a/drivers/pwm/pwm-apple.c b/drivers/pwm/pwm-apple.c
new file mode 100644
index 000000000000..551e07d49bf7
--- /dev/null
+++ b/drivers/pwm/pwm-apple.c
@@ -0,0 +1,159 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Driver for the Apple SoC PWM controller
+ *
+ * Copyright The Asahi Linux Contributors
+ *
+ * Limitations:
+ * - The writes to cycle registers are shadowed until a write to
+ * the control register.
+ * - If both OFF_CYCLES and ON_CYCLES are set to 0, the output
+ * is a constant off signal.
+ * - When APPLE_PWM_CTRL is set to 0, the output is constant low
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/math64.h>
+
+#define APPLE_PWM_CTRL 0x00
+#define APPLE_PWM_ON_CYCLES 0x1c
+#define APPLE_PWM_OFF_CYCLES 0x18
+
+#define APPLE_PWM_CTRL_ENABLE BIT(0)
+#define APPLE_PWM_CTRL_MODE BIT(2)
+#define APPLE_PWM_CTRL_UPDATE BIT(5)
+#define APPLE_PWM_CTRL_TRIGGER BIT(9)
+#define APPLE_PWM_CTRL_INVERT BIT(10)
+#define APPLE_PWM_CTRL_OUTPUT_ENABLE BIT(14)
+
+struct apple_pwm {
+ struct pwm_chip chip;
+ void __iomem *base;
+ u64 clkrate;
+};
+
+static inline struct apple_pwm *to_apple_pwm(struct pwm_chip *chip)
+{
+ return container_of(chip, struct apple_pwm, chip);
+}
+
+static int apple_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
+ const struct pwm_state *state)
+{
+ struct apple_pwm *fpwm;
+
+ if (state->polarity == PWM_POLARITY_INVERSED)
+ return -EINVAL;
+
+ fpwm = to_apple_pwm(chip);
+ if (state->enabled) {
+ u64 on_cycles, off_cycles;
+
+ on_cycles = mul_u64_u64_div_u64(fpwm->clkrate,
+ state->duty_cycle, NSEC_PER_SEC);
+ if (on_cycles > 0xFFFFFFFF)
+ return -ERANGE;
+
+ off_cycles = mul_u64_u64_div_u64(fpwm->clkrate,
+ state->period, NSEC_PER_SEC) - on_cycles;
+ if (off_cycles > 0xFFFFFFFF)
+ return -ERANGE;
+
+ writel(on_cycles, fpwm->base + APPLE_PWM_ON_CYCLES);
+ writel(off_cycles, fpwm->base + APPLE_PWM_OFF_CYCLES);
+ writel(APPLE_PWM_CTRL_ENABLE | APPLE_PWM_CTRL_OUTPUT_ENABLE | APPLE_PWM_CTRL_UPDATE,
+ fpwm->base + APPLE_PWM_CTRL);
+ } else {
+ writel(0, fpwm->base + APPLE_PWM_CTRL);
+ }
+ return 0;
+}
+
+static int apple_pwm_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
+ struct pwm_state *state)
+{
+ struct apple_pwm *fpwm;
+ u32 on_cycles, off_cycles, ctrl;
+
+ fpwm = to_apple_pwm(chip);
+
+ ctrl = readl(fpwm->base + APPLE_PWM_CTRL);
+ on_cycles = readl(fpwm->base + APPLE_PWM_ON_CYCLES);
+ off_cycles = readl(fpwm->base + APPLE_PWM_OFF_CYCLES);
+
+ state->enabled = (ctrl & APPLE_PWM_CTRL_ENABLE) && (ctrl & APPLE_PWM_CTRL_OUTPUT_ENABLE);
+ state->polarity = PWM_POLARITY_NORMAL;
+ // on_cycles + off_cycles is 33 bits, NSEC_PER_SEC is 30, there is no overflow
+ state->duty_cycle = DIV64_U64_ROUND_UP((u64)on_cycles * NSEC_PER_SEC, fpwm->clkrate);
+ state->period = DIV64_U64_ROUND_UP(((u64)off_cycles + (u64)on_cycles) *
+ NSEC_PER_SEC, fpwm->clkrate);
+
+ return 0;
+}
+
+static const struct pwm_ops apple_pwm_ops = {
+ .apply = apple_pwm_apply,
+ .get_state = apple_pwm_get_state,
+ .owner = THIS_MODULE,
+};
+
+static int apple_pwm_probe(struct platform_device *pdev)
+{
+ struct apple_pwm *fpwm;
+ struct clk *clk;
+ int ret;
+
+ fpwm = devm_kzalloc(&pdev->dev, sizeof(*fpwm), GFP_KERNEL);
+ if (!fpwm)
+ return -ENOMEM;
+
+ fpwm->base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(fpwm->base))
+ return PTR_ERR(fpwm->base);
+
+ clk = devm_clk_get_enabled(&pdev->dev, NULL);
+ if (IS_ERR(clk))
+ return dev_err_probe(&pdev->dev, PTR_ERR(clk), "unable to get the clock");
+
+ /*
+ * Uses the 24MHz system clock on all existing devices, can only
+ * happen if the device tree is broken
+ *
+ * This check is done to prevent an overflow in .apply
+ */
+ fpwm->clkrate = clk_get_rate(clk);
+ if (fpwm->clkrate > NSEC_PER_SEC)
+ return dev_err_probe(&pdev->dev, -EINVAL, "pwm clock out of range");
+
+ fpwm->chip.dev = &pdev->dev;
+ fpwm->chip.npwm = 1;
+ fpwm->chip.ops = &apple_pwm_ops;
+
+ ret = devm_pwmchip_add(&pdev->dev, &fpwm->chip);
+ if (ret < 0)
+ return dev_err_probe(&pdev->dev, ret, "unable to add pwm chip");
+
+ return 0;
+}
+
+static const struct of_device_id apple_pwm_of_match[] = {
+ { .compatible = "apple,s5l-fpwm" },
+ {}
+};
+MODULE_DEVICE_TABLE(of, apple_pwm_of_match);
+
+static struct platform_driver apple_pwm_driver = {
+ .probe = apple_pwm_probe,
+ .driver = {
+ .name = "apple-pwm",
+ .of_match_table = apple_pwm_of_match,
+ },
+};
+module_platform_driver(apple_pwm_driver);
+
+MODULE_DESCRIPTION("Apple SoC PWM driver");
+MODULE_LICENSE("Dual MIT/GPL");
--
2.37.1 (Apple Git-137.1)
Hello,
On Sat, Jan 14, 2023 at 04:25:05PM +0300, Sasha Finkelstein wrote:
> Adds the Apple PWM controller driver.
>
> Signed-off-by: Sasha Finkelstein <[email protected]>
> Acked-by: Sven Peter <[email protected]>
> ---
> drivers/pwm/Kconfig | 12 +++
> drivers/pwm/Makefile | 1 +
> drivers/pwm/pwm-apple.c | 159 ++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 172 insertions(+)
> create mode 100644 drivers/pwm/pwm-apple.c
>
> diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
> index dae023d783a2..8df861b1f4a3 100644
> --- a/drivers/pwm/Kconfig
> +++ b/drivers/pwm/Kconfig
> @@ -51,6 +51,18 @@ config PWM_AB8500
> To compile this driver as a module, choose M here: the module
> will be called pwm-ab8500.
>
> +config PWM_APPLE
> + tristate "Apple SoC PWM support"
> + depends on ARCH_APPLE || COMPILE_TEST
> + help
> + Generic PWM framework driver for PWM controller present on
> + Apple SoCs
> +
> + Say Y here if you have an ARM Apple laptop, otherwise say N
> +
> + To compile this driver as a module, choose M here: the module
> + will be called pwm-apple.
> +
> config PWM_ATMEL
> tristate "Atmel PWM support"
> depends on ARCH_AT91 || COMPILE_TEST
> diff --git a/drivers/pwm/Makefile b/drivers/pwm/Makefile
> index 7bf1a29f02b8..19899b912e00 100644
> --- a/drivers/pwm/Makefile
> +++ b/drivers/pwm/Makefile
> @@ -2,6 +2,7 @@
> obj-$(CONFIG_PWM) += core.o
> obj-$(CONFIG_PWM_SYSFS) += sysfs.o
> obj-$(CONFIG_PWM_AB8500) += pwm-ab8500.o
> +obj-$(CONFIG_PWM_APPLE) += pwm-apple.o
> obj-$(CONFIG_PWM_ATMEL) += pwm-atmel.o
> obj-$(CONFIG_PWM_ATMEL_HLCDC_PWM) += pwm-atmel-hlcdc.o
> obj-$(CONFIG_PWM_ATMEL_TCB) += pwm-atmel-tcb.o
> diff --git a/drivers/pwm/pwm-apple.c b/drivers/pwm/pwm-apple.c
> new file mode 100644
> index 000000000000..551e07d49bf7
> --- /dev/null
> +++ b/drivers/pwm/pwm-apple.c
> @@ -0,0 +1,159 @@
> +// SPDX-License-Identifier: GPL-2.0 OR MIT
> +/*
> + * Driver for the Apple SoC PWM controller
> + *
> + * Copyright The Asahi Linux Contributors
> + *
> + * Limitations:
> + * - The writes to cycle registers are shadowed until a write to
> + * the control register.
> + * - If both OFF_CYCLES and ON_CYCLES are set to 0, the output
> + * is a constant off signal.
> + * - When APPLE_PWM_CTRL is set to 0, the output is constant low
> + */
> +
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/pwm.h>
> +#include <linux/io.h>
> +#include <linux/clk.h>
> +#include <linux/math64.h>
> +
> +#define APPLE_PWM_CTRL 0x00
> +#define APPLE_PWM_ON_CYCLES 0x1c
> +#define APPLE_PWM_OFF_CYCLES 0x18
> +
> +#define APPLE_PWM_CTRL_ENABLE BIT(0)
> +#define APPLE_PWM_CTRL_MODE BIT(2)
> +#define APPLE_PWM_CTRL_UPDATE BIT(5)
> +#define APPLE_PWM_CTRL_TRIGGER BIT(9)
> +#define APPLE_PWM_CTRL_INVERT BIT(10)
> +#define APPLE_PWM_CTRL_OUTPUT_ENABLE BIT(14)
> +
> +struct apple_pwm {
> + struct pwm_chip chip;
> + void __iomem *base;
> + u64 clkrate;
> +};
> +
> +static inline struct apple_pwm *to_apple_pwm(struct pwm_chip *chip)
> +{
> + return container_of(chip, struct apple_pwm, chip);
> +}
> +
> +static int apple_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
> + const struct pwm_state *state)
> +{
> + struct apple_pwm *fpwm;
> +
> + if (state->polarity == PWM_POLARITY_INVERSED)
> + return -EINVAL;
> +
> + fpwm = to_apple_pwm(chip);
> + if (state->enabled) {
> + u64 on_cycles, off_cycles;
> +
> + on_cycles = mul_u64_u64_div_u64(fpwm->clkrate,
> + state->duty_cycle, NSEC_PER_SEC);
> + if (on_cycles > 0xFFFFFFFF)
> + return -ERANGE;
> +
> + off_cycles = mul_u64_u64_div_u64(fpwm->clkrate,
> + state->period, NSEC_PER_SEC) - on_cycles;
> + if (off_cycles > 0xFFFFFFFF)
> + return -ERANGE;
> +
> + writel(on_cycles, fpwm->base + APPLE_PWM_ON_CYCLES);
> + writel(off_cycles, fpwm->base + APPLE_PWM_OFF_CYCLES);
> + writel(APPLE_PWM_CTRL_ENABLE | APPLE_PWM_CTRL_OUTPUT_ENABLE | APPLE_PWM_CTRL_UPDATE,
> + fpwm->base + APPLE_PWM_CTRL);
> + } else {
> + writel(0, fpwm->base + APPLE_PWM_CTRL);
> + }
> + return 0;
> +}
> +
> +static int apple_pwm_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
> + struct pwm_state *state)
> +{
> + struct apple_pwm *fpwm;
> + u32 on_cycles, off_cycles, ctrl;
> +
> + fpwm = to_apple_pwm(chip);
> +
> + ctrl = readl(fpwm->base + APPLE_PWM_CTRL);
> + on_cycles = readl(fpwm->base + APPLE_PWM_ON_CYCLES);
> + off_cycles = readl(fpwm->base + APPLE_PWM_OFF_CYCLES);
> +
> + state->enabled = (ctrl & APPLE_PWM_CTRL_ENABLE) && (ctrl & APPLE_PWM_CTRL_OUTPUT_ENABLE);
> + state->polarity = PWM_POLARITY_NORMAL;
> + // on_cycles + off_cycles is 33 bits, NSEC_PER_SEC is 30, there is no overflow
> + state->duty_cycle = DIV64_U64_ROUND_UP((u64)on_cycles * NSEC_PER_SEC, fpwm->clkrate);
> + state->period = DIV64_U64_ROUND_UP(((u64)off_cycles + (u64)on_cycles) *
> + NSEC_PER_SEC, fpwm->clkrate);
> +
> + return 0;
> +}
> +
> +static const struct pwm_ops apple_pwm_ops = {
> + .apply = apple_pwm_apply,
> + .get_state = apple_pwm_get_state,
> + .owner = THIS_MODULE,
> +};
> +
> +static int apple_pwm_probe(struct platform_device *pdev)
> +{
> + struct apple_pwm *fpwm;
> + struct clk *clk;
> + int ret;
> +
> + fpwm = devm_kzalloc(&pdev->dev, sizeof(*fpwm), GFP_KERNEL);
> + if (!fpwm)
> + return -ENOMEM;
> +
> + fpwm->base = devm_platform_ioremap_resource(pdev, 0);
> + if (IS_ERR(fpwm->base))
> + return PTR_ERR(fpwm->base);
> +
> + clk = devm_clk_get_enabled(&pdev->dev, NULL);
> + if (IS_ERR(clk))
> + return dev_err_probe(&pdev->dev, PTR_ERR(clk), "unable to get the clock");
> +
I'd add a call to clk_rate_exclusive_get() here to justify that you
determine clkrate here and don't recheck later (and also to make sure
that your PWM output doesn't change for reasons out of your control).
(Even though the rate might be fixed on your platform, doing it right for
the benefit of people using your driver as a template is nice.)
But I intend to go over the PWM drivers and add such a call where
appropriate, so IMHO this doesn't need to delay application of this
driver.
> + /*
> + * Uses the 24MHz system clock on all existing devices, can only
> + * happen if the device tree is broken
> + *
> + * This check is done to prevent an overflow in .apply
> + */
> + fpwm->clkrate = clk_get_rate(clk);
> + if (fpwm->clkrate > NSEC_PER_SEC)
> + return dev_err_probe(&pdev->dev, -EINVAL, "pwm clock out of range");
> +
> + fpwm->chip.dev = &pdev->dev;
> + fpwm->chip.npwm = 1;
> + fpwm->chip.ops = &apple_pwm_ops;
> +
> + ret = devm_pwmchip_add(&pdev->dev, &fpwm->chip);
> + if (ret < 0)
> + return dev_err_probe(&pdev->dev, ret, "unable to add pwm chip");
> +
> + return 0;
> +}
> +
> +static const struct of_device_id apple_pwm_of_match[] = {
> + { .compatible = "apple,s5l-fpwm" },
Out of interest: What does the f in fpwm stand for?
Otherwise:
Reviewed-by: Uwe Kleine-K?nig <[email protected]>
FTR: You resent v7, I'll discard that from patchwork in the expectation
that Thierry will pick up the original v7.)
Best regards
Uwe
--
Pengutronix e.K. | Uwe Kleine-K?nig |
Industrial Linux Solutions | https://www.pengutronix.de/ |
Hello,
On Sat, Jan 14, 2023 at 04:25:05PM +0300, Sasha Finkelstein wrote:
> +static int apple_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
> + const struct pwm_state *state)
> +{
> + struct apple_pwm *fpwm;
> +
> + if (state->polarity == PWM_POLARITY_INVERSED)
> + return -EINVAL;
> +
> + fpwm = to_apple_pwm(chip);
> + if (state->enabled) {
> + u64 on_cycles, off_cycles;
> +
> + on_cycles = mul_u64_u64_div_u64(fpwm->clkrate,
> + state->duty_cycle, NSEC_PER_SEC);
> + if (on_cycles > 0xFFFFFFFF)
> + return -ERANGE;
The idea is to configure the biggest duty_cycle that is not bigger than
the requested duty_cycle. So don't return an error here, but use
0xffffffff instead.
I should have catched that in my v4 and my v6 review, sorry, I missed
that.
Best regards
Uwe
--
Pengutronix e.K. | Uwe Kleine-K?nig |
Industrial Linux Solutions | https://www.pengutronix.de/ |