From: Andrew Lunn <[email protected]>
The sxgdb MDIO bus driver can perform both C22 and C45 transfers.
Create separate functions for each and register the C45 versions using
the new API calls where appropriate.
Signed-off-by: Andrew Lunn <[email protected]>
Signed-off-by: Michael Walle <[email protected]>
---
drivers/net/ethernet/samsung/sxgbe/sxgbe_mdio.c | 105 ++++++++++++++++++------
1 file changed, 81 insertions(+), 24 deletions(-)
diff --git a/drivers/net/ethernet/samsung/sxgbe/sxgbe_mdio.c b/drivers/net/ethernet/samsung/sxgbe/sxgbe_mdio.c
index fceb6d637235..0227223c06fa 100644
--- a/drivers/net/ethernet/samsung/sxgbe/sxgbe_mdio.c
+++ b/drivers/net/ethernet/samsung/sxgbe/sxgbe_mdio.c
@@ -50,12 +50,12 @@ static void sxgbe_mdio_ctrl_data(struct sxgbe_priv_data *sp, u32 cmd,
}
static void sxgbe_mdio_c45(struct sxgbe_priv_data *sp, u32 cmd, int phyaddr,
- int phyreg, u16 phydata)
+ int devad, int phyreg, u16 phydata)
{
u32 reg;
/* set mdio address register */
- reg = ((phyreg >> 16) & 0x1f) << 21;
+ reg = (devad & 0x1f) << 21;
reg |= (phyaddr << 16) | (phyreg & 0xffff);
writel(reg, sp->ioaddr + sp->hw->mii.addr);
@@ -76,8 +76,8 @@ static void sxgbe_mdio_c22(struct sxgbe_priv_data *sp, u32 cmd, int phyaddr,
sxgbe_mdio_ctrl_data(sp, cmd, phydata);
}
-static int sxgbe_mdio_access(struct sxgbe_priv_data *sp, u32 cmd, int phyaddr,
- int phyreg, u16 phydata)
+static int sxgbe_mdio_access_c22(struct sxgbe_priv_data *sp, u32 cmd,
+ int phyaddr, int phyreg, u16 phydata)
{
const struct mii_regs *mii = &sp->hw->mii;
int rc;
@@ -86,33 +86,46 @@ static int sxgbe_mdio_access(struct sxgbe_priv_data *sp, u32 cmd, int phyaddr,
if (rc < 0)
return rc;
- if (phyreg & MII_ADDR_C45) {
- sxgbe_mdio_c45(sp, cmd, phyaddr, phyreg, phydata);
- } else {
- /* Ports 0-3 only support C22. */
- if (phyaddr >= 4)
- return -ENODEV;
+ /* Ports 0-3 only support C22. */
+ if (phyaddr >= 4)
+ return -ENODEV;
- sxgbe_mdio_c22(sp, cmd, phyaddr, phyreg, phydata);
- }
+ sxgbe_mdio_c22(sp, cmd, phyaddr, phyreg, phydata);
+
+ return sxgbe_mdio_busy_wait(sp->ioaddr, mii->data);
+}
+
+static int sxgbe_mdio_access_c45(struct sxgbe_priv_data *sp, u32 cmd,
+ int phyaddr, int devad, int phyreg,
+ u16 phydata)
+{
+ const struct mii_regs *mii = &sp->hw->mii;
+ int rc;
+
+ rc = sxgbe_mdio_busy_wait(sp->ioaddr, mii->data);
+ if (rc < 0)
+ return rc;
+
+ sxgbe_mdio_c45(sp, cmd, phyaddr, devad, phyreg, phydata);
return sxgbe_mdio_busy_wait(sp->ioaddr, mii->data);
}
/**
- * sxgbe_mdio_read
+ * sxgbe_mdio_read_c22
* @bus: points to the mii_bus structure
* @phyaddr: address of phy port
* @phyreg: address of register with in phy register
- * Description: this function used for C45 and C22 MDIO Read
+ * Description: this function used for C22 MDIO Read
*/
-static int sxgbe_mdio_read(struct mii_bus *bus, int phyaddr, int phyreg)
+static int sxgbe_mdio_read_c22(struct mii_bus *bus, int phyaddr, int phyreg)
{
struct net_device *ndev = bus->priv;
struct sxgbe_priv_data *priv = netdev_priv(ndev);
int rc;
- rc = sxgbe_mdio_access(priv, SXGBE_SMA_READ_CMD, phyaddr, phyreg, 0);
+ rc = sxgbe_mdio_access_c22(priv, SXGBE_SMA_READ_CMD, phyaddr,
+ phyreg, 0);
if (rc < 0)
return rc;
@@ -120,21 +133,63 @@ static int sxgbe_mdio_read(struct mii_bus *bus, int phyaddr, int phyreg)
}
/**
- * sxgbe_mdio_write
+ * sxgbe_mdio_read_c45
+ * @bus: points to the mii_bus structure
+ * @phyaddr: address of phy port
+ * @devad: device (MMD) address
+ * @phyreg: address of register with in phy register
+ * Description: this function used for C45 MDIO Read
+ */
+static int sxgbe_mdio_read_c45(struct mii_bus *bus, int phyaddr, int devad,
+ int phyreg)
+{
+ struct net_device *ndev = bus->priv;
+ struct sxgbe_priv_data *priv = netdev_priv(ndev);
+ int rc;
+
+ rc = sxgbe_mdio_access_c45(priv, SXGBE_SMA_READ_CMD, phyaddr,
+ devad, phyreg, 0);
+ if (rc < 0)
+ return rc;
+
+ return readl(priv->ioaddr + priv->hw->mii.data) & 0xffff;
+}
+
+/**
+ * sxgbe_mdio_write_c22
+ * @bus: points to the mii_bus structure
+ * @phyaddr: address of phy port
+ * @phyreg: address of phy registers
+ * @phydata: data to be written into phy register
+ * Description: this function is used for C22 MDIO write
+ */
+static int sxgbe_mdio_write_c22(struct mii_bus *bus, int phyaddr, int phyreg,
+ u16 phydata)
+{
+ struct net_device *ndev = bus->priv;
+ struct sxgbe_priv_data *priv = netdev_priv(ndev);
+
+ return sxgbe_mdio_access_c22(priv, SXGBE_SMA_WRITE_CMD, phyaddr, phyreg,
+ phydata);
+}
+
+/**
+ * sxgbe_mdio_write_c45
* @bus: points to the mii_bus structure
* @phyaddr: address of phy port
* @phyreg: address of phy registers
+ * @devad: device (MMD) address
* @phydata: data to be written into phy register
- * Description: this function is used for C45 and C22 MDIO write
+ * Description: this function is used for C45 MDIO write
*/
-static int sxgbe_mdio_write(struct mii_bus *bus, int phyaddr, int phyreg,
- u16 phydata)
+static int sxgbe_mdio_write_c45(struct mii_bus *bus, int phyaddr, int devad,
+ int phyreg, u16 phydata)
{
struct net_device *ndev = bus->priv;
struct sxgbe_priv_data *priv = netdev_priv(ndev);
- return sxgbe_mdio_access(priv, SXGBE_SMA_WRITE_CMD, phyaddr, phyreg,
- phydata);
+ return sxgbe_mdio_access_c45(priv, SXGBE_SMA_WRITE_CMD, phyaddr,
+ devad, phyreg, phydata);
}
int sxgbe_mdio_register(struct net_device *ndev)
@@ -161,8 +216,10 @@ int sxgbe_mdio_register(struct net_device *ndev)
/* assign mii bus fields */
mdio_bus->name = "sxgbe";
- mdio_bus->read = &sxgbe_mdio_read;
- mdio_bus->write = &sxgbe_mdio_write;
+ mdio_bus->read = sxgbe_mdio_read_c22;
+ mdio_bus->write = sxgbe_mdio_write_c22;
+ mdio_bus->read_c45 = sxgbe_mdio_read_c45;
+ mdio_bus->write_c45 = sxgbe_mdio_write_c45;
snprintf(mdio_bus->id, MII_BUS_ID_SIZE, "%s-%x",
mdio_bus->name, priv->plat->bus_id);
mdio_bus->priv = ndev;
--
2.30.2