2023-01-17 00:02:26

by Michael Walle

[permalink] [raw]
Subject: [PATCH net-next 03/12] net: nixge: Separate C22 and C45 transactions

From: Andrew Lunn <[email protected]>

The nixge MDIO bus driver can perform both C22 and C45 transfers.
Create separate functions for each and register the C45 versions using
the new API calls where appropriate.

Signed-off-by: Andrew Lunn <[email protected]>
Signed-off-by: Michael Walle <[email protected]>
---
drivers/net/ethernet/ni/nixge.c | 141 ++++++++++++++++++++++++----------------
1 file changed, 85 insertions(+), 56 deletions(-)

diff --git a/drivers/net/ethernet/ni/nixge.c b/drivers/net/ethernet/ni/nixge.c
index 62320be4de5a..56e02cba0b8a 100644
--- a/drivers/net/ethernet/ni/nixge.c
+++ b/drivers/net/ethernet/ni/nixge.c
@@ -1081,40 +1081,59 @@ static const struct ethtool_ops nixge_ethtool_ops = {
.get_link = ethtool_op_get_link,
};

-static int nixge_mdio_read(struct mii_bus *bus, int phy_id, int reg)
+static int nixge_mdio_read_c22(struct mii_bus *bus, int phy_id, int reg)
{
struct nixge_priv *priv = bus->priv;
u32 status, tmp;
int err;
u16 device;

- if (reg & MII_ADDR_C45) {
- device = (reg >> 16) & 0x1f;
+ device = reg & 0x1f;

- nixge_ctrl_write_reg(priv, NIXGE_REG_MDIO_ADDR, reg & 0xffff);
+ tmp = NIXGE_MDIO_CLAUSE22 | NIXGE_MDIO_OP(NIXGE_MDIO_C22_READ) |
+ NIXGE_MDIO_ADDR(phy_id) | NIXGE_MDIO_MMD(device);

- tmp = NIXGE_MDIO_CLAUSE45 | NIXGE_MDIO_OP(NIXGE_MDIO_OP_ADDRESS)
- | NIXGE_MDIO_ADDR(phy_id) | NIXGE_MDIO_MMD(device);
+ nixge_ctrl_write_reg(priv, NIXGE_REG_MDIO_OP, tmp);
+ nixge_ctrl_write_reg(priv, NIXGE_REG_MDIO_CTRL, 1);

- nixge_ctrl_write_reg(priv, NIXGE_REG_MDIO_OP, tmp);
- nixge_ctrl_write_reg(priv, NIXGE_REG_MDIO_CTRL, 1);
+ err = nixge_ctrl_poll_timeout(priv, NIXGE_REG_MDIO_CTRL, status,
+ !status, 10, 1000);
+ if (err) {
+ dev_err(priv->dev, "timeout setting read command");
+ return err;
+ }

- err = nixge_ctrl_poll_timeout(priv, NIXGE_REG_MDIO_CTRL, status,
- !status, 10, 1000);
- if (err) {
- dev_err(priv->dev, "timeout setting address");
- return err;
- }
+ status = nixge_ctrl_read_reg(priv, NIXGE_REG_MDIO_DATA);

- tmp = NIXGE_MDIO_CLAUSE45 | NIXGE_MDIO_OP(NIXGE_MDIO_C45_READ) |
- NIXGE_MDIO_ADDR(phy_id) | NIXGE_MDIO_MMD(device);
- } else {
- device = reg & 0x1f;
+ return status;
+}

- tmp = NIXGE_MDIO_CLAUSE22 | NIXGE_MDIO_OP(NIXGE_MDIO_C22_READ) |
- NIXGE_MDIO_ADDR(phy_id) | NIXGE_MDIO_MMD(device);
+static int nixge_mdio_read_c45(struct mii_bus *bus, int phy_id, int device,
+ int reg)
+{
+ struct nixge_priv *priv = bus->priv;
+ u32 status, tmp;
+ int err;
+
+ nixge_ctrl_write_reg(priv, NIXGE_REG_MDIO_ADDR, reg & 0xffff);
+
+ tmp = NIXGE_MDIO_CLAUSE45 |
+ NIXGE_MDIO_OP(NIXGE_MDIO_OP_ADDRESS) |
+ NIXGE_MDIO_ADDR(phy_id) | NIXGE_MDIO_MMD(device);
+
+ nixge_ctrl_write_reg(priv, NIXGE_REG_MDIO_OP, tmp);
+ nixge_ctrl_write_reg(priv, NIXGE_REG_MDIO_CTRL, 1);
+
+ err = nixge_ctrl_poll_timeout(priv, NIXGE_REG_MDIO_CTRL, status,
+ !status, 10, 1000);
+ if (err) {
+ dev_err(priv->dev, "timeout setting address");
+ return err;
}

+ tmp = NIXGE_MDIO_CLAUSE45 | NIXGE_MDIO_OP(NIXGE_MDIO_C45_READ) |
+ NIXGE_MDIO_ADDR(phy_id) | NIXGE_MDIO_MMD(device);
+
nixge_ctrl_write_reg(priv, NIXGE_REG_MDIO_OP, tmp);
nixge_ctrl_write_reg(priv, NIXGE_REG_MDIO_CTRL, 1);

@@ -1130,57 +1149,65 @@ static int nixge_mdio_read(struct mii_bus *bus, int phy_id, int reg)
return status;
}

-static int nixge_mdio_write(struct mii_bus *bus, int phy_id, int reg, u16 val)
+static int nixge_mdio_write_c22(struct mii_bus *bus, int phy_id, int reg,
+ u16 val)
{
struct nixge_priv *priv = bus->priv;
u32 status, tmp;
u16 device;
int err;

- if (reg & MII_ADDR_C45) {
- device = (reg >> 16) & 0x1f;
+ device = reg & 0x1f;

- nixge_ctrl_write_reg(priv, NIXGE_REG_MDIO_ADDR, reg & 0xffff);
+ tmp = NIXGE_MDIO_CLAUSE22 | NIXGE_MDIO_OP(NIXGE_MDIO_C22_WRITE) |
+ NIXGE_MDIO_ADDR(phy_id) | NIXGE_MDIO_MMD(device);

- tmp = NIXGE_MDIO_CLAUSE45 | NIXGE_MDIO_OP(NIXGE_MDIO_OP_ADDRESS)
- | NIXGE_MDIO_ADDR(phy_id) | NIXGE_MDIO_MMD(device);
+ nixge_ctrl_write_reg(priv, NIXGE_REG_MDIO_DATA, val);
+ nixge_ctrl_write_reg(priv, NIXGE_REG_MDIO_OP, tmp);
+ nixge_ctrl_write_reg(priv, NIXGE_REG_MDIO_CTRL, 1);

- nixge_ctrl_write_reg(priv, NIXGE_REG_MDIO_OP, tmp);
- nixge_ctrl_write_reg(priv, NIXGE_REG_MDIO_CTRL, 1);
+ err = nixge_ctrl_poll_timeout(priv, NIXGE_REG_MDIO_CTRL, status,
+ !status, 10, 1000);
+ if (err)
+ dev_err(priv->dev, "timeout setting write command");

- err = nixge_ctrl_poll_timeout(priv, NIXGE_REG_MDIO_CTRL, status,
- !status, 10, 1000);
- if (err) {
- dev_err(priv->dev, "timeout setting address");
- return err;
- }
+ return err;
+}

- tmp = NIXGE_MDIO_CLAUSE45 | NIXGE_MDIO_OP(NIXGE_MDIO_C45_WRITE)
- | NIXGE_MDIO_ADDR(phy_id) | NIXGE_MDIO_MMD(device);
+static int nixge_mdio_write_c45(struct mii_bus *bus, int phy_id,
+ int device, int reg, u16 val)
+{
+ struct nixge_priv *priv = bus->priv;
+ u32 status, tmp;
+ int err;

- nixge_ctrl_write_reg(priv, NIXGE_REG_MDIO_DATA, val);
- nixge_ctrl_write_reg(priv, NIXGE_REG_MDIO_OP, tmp);
- err = nixge_ctrl_poll_timeout(priv, NIXGE_REG_MDIO_CTRL, status,
- !status, 10, 1000);
- if (err)
- dev_err(priv->dev, "timeout setting write command");
- } else {
- device = reg & 0x1f;
+ nixge_ctrl_write_reg(priv, NIXGE_REG_MDIO_ADDR, reg & 0xffff);

- tmp = NIXGE_MDIO_CLAUSE22 |
- NIXGE_MDIO_OP(NIXGE_MDIO_C22_WRITE) |
- NIXGE_MDIO_ADDR(phy_id) | NIXGE_MDIO_MMD(device);
+ tmp = NIXGE_MDIO_CLAUSE45 |
+ NIXGE_MDIO_OP(NIXGE_MDIO_OP_ADDRESS) |
+ NIXGE_MDIO_ADDR(phy_id) | NIXGE_MDIO_MMD(device);

- nixge_ctrl_write_reg(priv, NIXGE_REG_MDIO_DATA, val);
- nixge_ctrl_write_reg(priv, NIXGE_REG_MDIO_OP, tmp);
- nixge_ctrl_write_reg(priv, NIXGE_REG_MDIO_CTRL, 1);
+ nixge_ctrl_write_reg(priv, NIXGE_REG_MDIO_OP, tmp);
+ nixge_ctrl_write_reg(priv, NIXGE_REG_MDIO_CTRL, 1);

- err = nixge_ctrl_poll_timeout(priv, NIXGE_REG_MDIO_CTRL, status,
- !status, 10, 1000);
- if (err)
- dev_err(priv->dev, "timeout setting write command");
+ err = nixge_ctrl_poll_timeout(priv, NIXGE_REG_MDIO_CTRL, status,
+ !status, 10, 1000);
+ if (err) {
+ dev_err(priv->dev, "timeout setting address");
+ return err;
}

+ tmp = NIXGE_MDIO_CLAUSE45 | NIXGE_MDIO_OP(NIXGE_MDIO_C45_WRITE) |
+ NIXGE_MDIO_ADDR(phy_id) | NIXGE_MDIO_MMD(device);
+
+ nixge_ctrl_write_reg(priv, NIXGE_REG_MDIO_DATA, val);
+ nixge_ctrl_write_reg(priv, NIXGE_REG_MDIO_OP, tmp);
+
+ err = nixge_ctrl_poll_timeout(priv, NIXGE_REG_MDIO_CTRL, status,
+ !status, 10, 1000);
+ if (err)
+ dev_err(priv->dev, "timeout setting write command");
+
return err;
}

@@ -1195,8 +1222,10 @@ static int nixge_mdio_setup(struct nixge_priv *priv, struct device_node *np)
snprintf(bus->id, MII_BUS_ID_SIZE, "%s-mii", dev_name(priv->dev));
bus->priv = priv;
bus->name = "nixge_mii_bus";
- bus->read = nixge_mdio_read;
- bus->write = nixge_mdio_write;
+ bus->read = nixge_mdio_read_c22;
+ bus->write = nixge_mdio_write_c22;
+ bus->read_c45 = nixge_mdio_read_c45;
+ bus->write_c45 = nixge_mdio_write_c45;
bus->parent = priv->dev;

priv->mii_bus = bus;

--
2.30.2