Add the peripherals clock controller driver in the s4 SoC family.
Signed-off-by: Yu Tu <[email protected]>
---
drivers/clk/meson/Kconfig | 12 +
drivers/clk/meson/Makefile | 1 +
drivers/clk/meson/s4-peripherals.c | 3874 ++++++++++++++++++++++++++++
drivers/clk/meson/s4-peripherals.h | 218 ++
4 files changed, 4105 insertions(+)
create mode 100644 drivers/clk/meson/s4-peripherals.c
create mode 100644 drivers/clk/meson/s4-peripherals.h
diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig
index a663c90a3f3b..a6eb9fa15c74 100644
--- a/drivers/clk/meson/Kconfig
+++ b/drivers/clk/meson/Kconfig
@@ -128,4 +128,16 @@ config COMMON_CLK_S4_PLL
aka s4. Amlogic S805X2 and S905Y4 devices include AQ222 and AQ229.
Say Y if you want the board to work, because plls are the parent of most
peripherals.
+
+config COMMON_CLK_S4
+ tristate "S4 SoC Peripherals clock controllers support"
+ depends on ARM64
+ default y
+ select COMMON_CLK_MESON_REGMAP
+ select COMMON_CLK_MESON_DUALDIV
+ select COMMON_CLK_MESON_VID_PLL_DIV
+ help
+ Support for the Peripherals clock controller on Amlogic S805X2 and S905Y4
+ devices, aka s4. Amlogic S805X2 and S905Y4 devices include AQ222 and AQ229.
+ Say Y if you want peripherals to work.
endmenu
diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile
index 376f49cc13f1..c9130afccb48 100644
--- a/drivers/clk/meson/Makefile
+++ b/drivers/clk/meson/Makefile
@@ -20,3 +20,4 @@ obj-$(CONFIG_COMMON_CLK_GXBB) += gxbb.o gxbb-aoclk.o
obj-$(CONFIG_COMMON_CLK_G12A) += g12a.o g12a-aoclk.o
obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b.o meson8-ddr.o
obj-$(CONFIG_COMMON_CLK_S4_PLL) += s4-pll.o
+obj-$(CONFIG_COMMON_CLK_S4) += s4-peripherals.o
diff --git a/drivers/clk/meson/s4-peripherals.c b/drivers/clk/meson/s4-peripherals.c
new file mode 100644
index 000000000000..b3f249a0c2f5
--- /dev/null
+++ b/drivers/clk/meson/s4-peripherals.c
@@ -0,0 +1,3874 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Amlogic Meson-S4 Peripherals Clock Controller Driver
+ *
+ * Copyright (c) 2021 Amlogic, inc.
+ * Author: Yu Tu <[email protected]>
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+
+#include "clk-regmap.h"
+#include "vid-pll-div.h"
+#include "clk-dualdiv.h"
+#include "s4-peripherals.h"
+
+static struct clk_regmap s4_rtc_32k_by_oscin_clkin = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = CLKCTRL_RTC_BY_OSCIN_CTRL0,
+ .bit_idx = 31,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "rtc_32k_by_oscin_clkin",
+ .ops = &clk_regmap_gate_ops,
+ .parent_data = (const struct clk_parent_data []) {
+ { .fw_name = "xtal", }
+ },
+ .num_parents = 1,
+ },
+};
+
+static const struct meson_clk_dualdiv_param s4_32k_div_table[] = {
+ {
+ .dual = 1,
+ .n1 = 733,
+ .m1 = 8,
+ .n2 = 732,
+ .m2 = 11,
+ },
+ {}
+};
+
+static struct clk_regmap s4_rtc_32k_by_oscin_div = {
+ .data = &(struct meson_clk_dualdiv_data){
+ .n1 = {
+ .reg_off = CLKCTRL_RTC_BY_OSCIN_CTRL0,
+ .shift = 0,
+ .width = 12,
+ },
+ .n2 = {
+ .reg_off = CLKCTRL_RTC_BY_OSCIN_CTRL0,
+ .shift = 12,
+ .width = 12,
+ },
+ .m1 = {
+ .reg_off = CLKCTRL_RTC_BY_OSCIN_CTRL1,
+ .shift = 0,
+ .width = 12,
+ },
+ .m2 = {
+ .reg_off = CLKCTRL_RTC_BY_OSCIN_CTRL1,
+ .shift = 12,
+ .width = 12,
+ },
+ .dual = {
+ .reg_off = CLKCTRL_RTC_BY_OSCIN_CTRL0,
+ .shift = 28,
+ .width = 1,
+ },
+ .table = s4_32k_div_table,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "rtc_32k_by_oscin_div",
+ .ops = &meson_clk_dualdiv_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &s4_rtc_32k_by_oscin_clkin.hw
+ },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_regmap s4_rtc_32k_by_oscin_sel = {
+ .data = &(struct clk_regmap_mux_data) {
+ .offset = CLKCTRL_RTC_BY_OSCIN_CTRL1,
+ .mask = 0x1,
+ .shift = 24,
+ .flags = CLK_MUX_ROUND_CLOSEST,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "rtc_32k_by_oscin_sel",
+ .ops = &clk_regmap_mux_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &s4_rtc_32k_by_oscin_div.hw,
+ &s4_rtc_32k_by_oscin_clkin.hw,
+ },
+ .num_parents = 2,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_rtc_32k_by_oscin = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = CLKCTRL_RTC_BY_OSCIN_CTRL0,
+ .bit_idx = 30,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "rtc_32k_by_oscin",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &s4_rtc_32k_by_oscin_sel.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+/*
+ * This RTC clock can be supplied by an external 32KHz crystal oscillator.
+ * If it is used, it should be documented in using fw_name and documented in the
+ * Bindings. Not currently in use on this board.
+ */
+static const struct clk_parent_data rtc_clk_sel_parent_data[] = {
+ { .hw = &s4_rtc_32k_by_oscin.hw },
+ { .hw = &s4_rtc_32k_by_oscin_div.hw },
+ { .fw_name = "ext_32k", }
+};
+
+static struct clk_regmap s4_rtc_clk = {
+ .data = &(struct clk_regmap_mux_data) {
+ .offset = CLKCTRL_RTC_CTRL,
+ .mask = 0x3,
+ .shift = 0,
+ .flags = CLK_MUX_ROUND_CLOSEST,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "rtc_clk_sel",
+ .ops = &clk_regmap_mux_ops,
+ .parent_data = rtc_clk_sel_parent_data,
+ .num_parents = 2,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+/* The index 5 is AXI_CLK, which is dedicated to AXI. So skip it. */
+static u32 mux_table_sys_ab_clk_sel[] = { 0, 1, 2, 3, 4, 6, 7 };
+static const struct clk_parent_data sys_ab_clk_parent_data[] = {
+ { .fw_name = "xtal" },
+ { .fw_name = "fclk_div2" },
+ { .fw_name = "fclk_div3" },
+ { .fw_name = "fclk_div4" },
+ { .fw_name = "fclk_div5" },
+ { .fw_name = "fclk_div7" },
+ { .hw = &s4_rtc_clk.hw }
+};
+
+static struct clk_regmap s4_sysclk_b_sel = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = CLKCTRL_SYS_CLK_CTRL0,
+ .mask = 0x7,
+ .shift = 26,
+ .table = mux_table_sys_ab_clk_sel,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "sysclk_b_sel",
+ .ops = &clk_regmap_mux_ops,
+ .parent_data = sys_ab_clk_parent_data,
+ .num_parents = ARRAY_SIZE(sys_ab_clk_parent_data),
+ },
+};
+
+static struct clk_regmap s4_sysclk_b_div = {
+ .data = &(struct clk_regmap_div_data){
+ .offset = CLKCTRL_SYS_CLK_CTRL0,
+ .shift = 16,
+ .width = 10,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "sysclk_b_div",
+ .ops = &clk_regmap_divider_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &s4_sysclk_b_sel.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_sysclk_b = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = CLKCTRL_SYS_CLK_CTRL0,
+ .bit_idx = 29,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "sysclk_b",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &s4_sysclk_b_div.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_sysclk_a_sel = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = CLKCTRL_SYS_CLK_CTRL0,
+ .mask = 0x7,
+ .shift = 10,
+ .table = mux_table_sys_ab_clk_sel,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "sysclk_a_sel",
+ .ops = &clk_regmap_mux_ops,
+ .parent_data = sys_ab_clk_parent_data,
+ .num_parents = ARRAY_SIZE(sys_ab_clk_parent_data),
+ },
+};
+
+static struct clk_regmap s4_sysclk_a_div = {
+ .data = &(struct clk_regmap_div_data){
+ .offset = CLKCTRL_SYS_CLK_CTRL0,
+ .shift = 0,
+ .width = 10,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "sysclk_a_div",
+ .ops = &clk_regmap_divider_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &s4_sysclk_a_sel.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_sysclk_a = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = CLKCTRL_SYS_CLK_CTRL0,
+ .bit_idx = 13,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "sysclk_a",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &s4_sysclk_a_div.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_sys_clk = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = CLKCTRL_SYS_CLK_CTRL0,
+ .mask = 0x1,
+ .shift = 31,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "sys_clk",
+ .ops = &clk_regmap_mux_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &s4_sysclk_a.hw,
+ &s4_sysclk_b.hw
+ },
+ .num_parents = 2,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_ceca_32k_clkin = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = CLKCTRL_CECA_CTRL0,
+ .bit_idx = 31,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "ceca_32k_clkin",
+ .ops = &clk_regmap_gate_ops,
+ .parent_data = (const struct clk_parent_data []) {
+ { .fw_name = "xtal", }
+ },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_regmap s4_ceca_32k_div = {
+ .data = &(struct meson_clk_dualdiv_data){
+ .n1 = {
+ .reg_off = CLKCTRL_CECA_CTRL0,
+ .shift = 0,
+ .width = 12,
+ },
+ .n2 = {
+ .reg_off = CLKCTRL_CECA_CTRL0,
+ .shift = 12,
+ .width = 12,
+ },
+ .m1 = {
+ .reg_off = CLKCTRL_CECA_CTRL1,
+ .shift = 0,
+ .width = 12,
+ },
+ .m2 = {
+ .reg_off = CLKCTRL_CECA_CTRL1,
+ .shift = 12,
+ .width = 12,
+ },
+ .dual = {
+ .reg_off = CLKCTRL_CECA_CTRL0,
+ .shift = 28,
+ .width = 1,
+ },
+ .table = s4_32k_div_table,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "ceca_32k_div",
+ .ops = &meson_clk_dualdiv_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &s4_ceca_32k_clkin.hw
+ },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_regmap s4_ceca_32k_sel_pre = {
+ .data = &(struct clk_regmap_mux_data) {
+ .offset = CLKCTRL_CECA_CTRL1,
+ .mask = 0x1,
+ .shift = 24,
+ .flags = CLK_MUX_ROUND_CLOSEST,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "ceca_32k_sel_pre",
+ .ops = &clk_regmap_mux_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &s4_ceca_32k_div.hw,
+ &s4_ceca_32k_clkin.hw
+ },
+ .num_parents = 2,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_ceca_32k_sel = {
+ .data = &(struct clk_regmap_mux_data) {
+ .offset = CLKCTRL_CECA_CTRL1,
+ .mask = 0x1,
+ .shift = 31,
+ .flags = CLK_MUX_ROUND_CLOSEST,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "ceca_32k_sel",
+ .ops = &clk_regmap_mux_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &s4_ceca_32k_sel_pre.hw,
+ &s4_rtc_clk.hw
+ },
+ .num_parents = 2,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_ceca_32k_clkout = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = CLKCTRL_CECA_CTRL0,
+ .bit_idx = 30,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "ceca_32k_clkout",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &s4_ceca_32k_sel.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_cecb_32k_clkin = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = CLKCTRL_CECB_CTRL0,
+ .bit_idx = 31,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "cecb_32k_clkin",
+ .ops = &clk_regmap_gate_ops,
+ .parent_data = (const struct clk_parent_data []) {
+ { .fw_name = "xtal", }
+ },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_regmap s4_cecb_32k_div = {
+ .data = &(struct meson_clk_dualdiv_data){
+ .n1 = {
+ .reg_off = CLKCTRL_CECB_CTRL0,
+ .shift = 0,
+ .width = 12,
+ },
+ .n2 = {
+ .reg_off = CLKCTRL_CECB_CTRL0,
+ .shift = 12,
+ .width = 12,
+ },
+ .m1 = {
+ .reg_off = CLKCTRL_CECB_CTRL1,
+ .shift = 0,
+ .width = 12,
+ },
+ .m2 = {
+ .reg_off = CLKCTRL_CECB_CTRL1,
+ .shift = 12,
+ .width = 12,
+ },
+ .dual = {
+ .reg_off = CLKCTRL_CECB_CTRL0,
+ .shift = 28,
+ .width = 1,
+ },
+ .table = s4_32k_div_table,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "cecb_32k_div",
+ .ops = &meson_clk_dualdiv_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &s4_cecb_32k_clkin.hw
+ },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_regmap s4_cecb_32k_sel_pre = {
+ .data = &(struct clk_regmap_mux_data) {
+ .offset = CLKCTRL_CECB_CTRL1,
+ .mask = 0x1,
+ .shift = 24,
+ .flags = CLK_MUX_ROUND_CLOSEST,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "cecb_32k_sel_pre",
+ .ops = &clk_regmap_mux_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &s4_cecb_32k_div.hw,
+ &s4_cecb_32k_clkin.hw
+ },
+ .num_parents = 2,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_cecb_32k_sel = {
+ .data = &(struct clk_regmap_mux_data) {
+ .offset = CLKCTRL_CECB_CTRL1,
+ .mask = 0x1,
+ .shift = 31,
+ .flags = CLK_MUX_ROUND_CLOSEST,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "cecb_32k_sel",
+ .ops = &clk_regmap_mux_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &s4_cecb_32k_sel_pre.hw,
+ &s4_rtc_clk.hw
+ },
+ .num_parents = 2,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_cecb_32k_clkout = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = CLKCTRL_CECB_CTRL0,
+ .bit_idx = 30,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "cecb_32k_clkout",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &s4_cecb_32k_sel.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static const struct clk_parent_data s4_sc_parent_data[] = {
+ { .fw_name = "fclk_div4" },
+ { .fw_name = "fclk_div3" },
+ { .fw_name = "fclk_div5" },
+ { .fw_name = "xtal", }
+};
+
+static struct clk_regmap s4_sc_clk_mux = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = CLKCTRL_SC_CLK_CTRL,
+ .mask = 0x3,
+ .shift = 9,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "sc_clk_mux",
+ .ops = &clk_regmap_mux_ops,
+ .parent_data = s4_sc_parent_data,
+ .num_parents = ARRAY_SIZE(s4_sc_parent_data),
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_sc_clk_div = {
+ .data = &(struct clk_regmap_div_data){
+ .offset = CLKCTRL_SC_CLK_CTRL,
+ .shift = 0,
+ .width = 8,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "sc_clk_div",
+ .ops = &clk_regmap_divider_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &s4_sc_clk_mux.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_sc_clk_gate = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = CLKCTRL_SC_CLK_CTRL,
+ .bit_idx = 8,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "sc_clk_gate",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &s4_sc_clk_div.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_12_24M_clk_gate = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = CLKCTRL_CLK12_24_CTRL,
+ .bit_idx = 11,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "12_24m_gate",
+ .ops = &clk_regmap_gate_ops,
+ .parent_data = (const struct clk_parent_data []) {
+ { .fw_name = "xtal", }
+ },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_fixed_factor s4_12M_clk_div = {
+ .mult = 1,
+ .div = 2,
+ .hw.init = &(struct clk_init_data){
+ .name = "12M",
+ .ops = &clk_fixed_factor_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &s4_12_24M_clk_gate.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_12_24M_clk = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = CLKCTRL_CLK12_24_CTRL,
+ .mask = 0x1,
+ .shift = 10,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "12_24m",
+ .ops = &clk_regmap_mux_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &s4_12_24M_clk_gate.hw,
+ &s4_12M_clk_div.hw,
+ },
+ .num_parents = 2,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+/* Video Clocks */
+static struct clk_regmap s4_vid_pll_div = {
+ .data = &(struct meson_vid_pll_div_data){
+ .val = {
+ .reg_off = CLKCTRL_VID_PLL_CLK_DIV,
+ .shift = 0,
+ .width = 15,
+ },
+ .sel = {
+ .reg_off = CLKCTRL_VID_PLL_CLK_DIV,
+ .shift = 16,
+ .width = 2,
+ },
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "vid_pll_div",
+ /*
+ * The frequency division from the hdmi_pll clock to the vid_pll_div
+ * clock is the default value of this register. When designing the
+ * video module of the chip, a default value that can meet the
+ * requirements of the video module will be solidified according
+ * to the usage requirements of the chip, so as to facilitate chip
+ * simulation. So this is ro_ops.
+ * It is important to note that this clock is not used on this
+ * chip and is described only for the integrity of the clock tree.
+ */
+ .ops = &meson_vid_pll_div_ro_ops,
+ .parent_data = (const struct clk_parent_data []) {
+ { .fw_name = "hdmi_pll", }
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_vid_pll_sel = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = CLKCTRL_VID_PLL_CLK_DIV,
+ .mask = 0x1,
+ .shift = 18,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "vid_pll_sel",
+ .ops = &clk_regmap_mux_ops,
+ .parent_data = (const struct clk_parent_data []) {
+ { .hw = &s4_vid_pll_div.hw },
+ { .fw_name = "hdmi_pll", }
+ },
+ .num_parents = 2,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_vid_pll = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = CLKCTRL_VID_PLL_CLK_DIV,
+ .bit_idx = 19,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "vid_pll",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &s4_vid_pll_sel.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static const struct clk_parent_data s4_vclk_parent_data[] = {
+ { .hw = &s4_vid_pll.hw },
+ { .fw_name = "gp0_pll", },
+ { .fw_name = "hifi_pll", },
+ { .fw_name = "mpll1", },
+ { .fw_name = "fclk_div3", },
+ { .fw_name = "fclk_div4", },
+ { .fw_name = "fclk_div5", },
+ { .fw_name = "fclk_div7", },
+};
+
+static struct clk_regmap s4_vclk_sel = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = CLKCTRL_VID_CLK_CTRL,
+ .mask = 0x7,
+ .shift = 16,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "vclk_sel",
+ .ops = &clk_regmap_mux_ops,
+ .parent_data = s4_vclk_parent_data,
+ .num_parents = ARRAY_SIZE(s4_vclk_parent_data),
+ /*
+ * When the driver uses this clock, needs to specify the patent clock
+ * he wants in the dts.
+ */
+ .flags = CLK_SET_RATE_NO_REPARENT | CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_vclk2_sel = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = CLKCTRL_VIID_CLK_CTRL,
+ .mask = 0x7,
+ .shift = 16,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "vclk2_sel",
+ .ops = &clk_regmap_mux_ops,
+ .parent_data = s4_vclk_parent_data,
+ .num_parents = ARRAY_SIZE(s4_vclk_parent_data),
+ .flags = CLK_SET_RATE_NO_REPARENT | CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_vclk_input = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = CLKCTRL_VID_CLK_DIV,
+ .bit_idx = 16,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "vclk_input",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) { &s4_vclk_sel.hw },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_vclk2_input = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = CLKCTRL_VIID_CLK_DIV,
+ .bit_idx = 16,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "vclk2_input",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) { &s4_vclk2_sel.hw },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_vclk_div = {
+ .data = &(struct clk_regmap_div_data){
+ .offset = CLKCTRL_VID_CLK_DIV,
+ .shift = 0,
+ .width = 8,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "vclk_div",
+ .ops = &clk_regmap_divider_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &s4_vclk_input.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_vclk2_div = {
+ .data = &(struct clk_regmap_div_data){
+ .offset = CLKCTRL_VIID_CLK_DIV,
+ .shift = 0,
+ .width = 8,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "vclk2_div",
+ .ops = &clk_regmap_divider_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &s4_vclk2_input.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_vclk = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = CLKCTRL_VID_CLK_CTRL,
+ .bit_idx = 19,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "vclk",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) { &s4_vclk_div.hw },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_vclk2 = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = CLKCTRL_VIID_CLK_CTRL,
+ .bit_idx = 19,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "vclk2",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) { &s4_vclk2_div.hw },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_vclk_div1 = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = CLKCTRL_VID_CLK_CTRL,
+ .bit_idx = 0,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "vclk_div1",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) { &s4_vclk.hw },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_vclk_div2_en = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = CLKCTRL_VID_CLK_CTRL,
+ .bit_idx = 1,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "vclk_div2_en",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) { &s4_vclk.hw },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_vclk_div4_en = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = CLKCTRL_VID_CLK_CTRL,
+ .bit_idx = 2,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "vclk_div4_en",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) { &s4_vclk.hw },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_vclk_div6_en = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = CLKCTRL_VID_CLK_CTRL,
+ .bit_idx = 3,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "vclk_div6_en",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) { &s4_vclk.hw },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_vclk_div12_en = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = CLKCTRL_VID_CLK_CTRL,
+ .bit_idx = 4,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "vclk_div12_en",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) { &s4_vclk.hw },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_vclk2_div1 = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = CLKCTRL_VIID_CLK_CTRL,
+ .bit_idx = 0,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "vclk2_div1",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) { &s4_vclk2.hw },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_vclk2_div2_en = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = CLKCTRL_VIID_CLK_CTRL,
+ .bit_idx = 1,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "vclk2_div2_en",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) { &s4_vclk2.hw },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_vclk2_div4_en = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = CLKCTRL_VIID_CLK_CTRL,
+ .bit_idx = 2,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "vclk2_div4_en",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) { &s4_vclk2.hw },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_vclk2_div6_en = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = CLKCTRL_VIID_CLK_CTRL,
+ .bit_idx = 3,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "vclk2_div6_en",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) { &s4_vclk2.hw },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_vclk2_div12_en = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = CLKCTRL_VIID_CLK_CTRL,
+ .bit_idx = 4,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "vclk2_div12_en",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) { &s4_vclk2.hw },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_fixed_factor s4_vclk_div2 = {
+ .mult = 1,
+ .div = 2,
+ .hw.init = &(struct clk_init_data){
+ .name = "vclk_div2",
+ .ops = &clk_fixed_factor_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &s4_vclk_div2_en.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_fixed_factor s4_vclk_div4 = {
+ .mult = 1,
+ .div = 4,
+ .hw.init = &(struct clk_init_data){
+ .name = "vclk_div4",
+ .ops = &clk_fixed_factor_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &s4_vclk_div4_en.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_fixed_factor s4_vclk_div6 = {
+ .mult = 1,
+ .div = 6,
+ .hw.init = &(struct clk_init_data){
+ .name = "vclk_div6",
+ .ops = &clk_fixed_factor_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &s4_vclk_div6_en.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_fixed_factor s4_vclk_div12 = {
+ .mult = 1,
+ .div = 12,
+ .hw.init = &(struct clk_init_data){
+ .name = "vclk_div12",
+ .ops = &clk_fixed_factor_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &s4_vclk_div12_en.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_fixed_factor s4_vclk2_div2 = {
+ .mult = 1,
+ .div = 2,
+ .hw.init = &(struct clk_init_data){
+ .name = "vclk2_div2",
+ .ops = &clk_fixed_factor_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &s4_vclk2_div2_en.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_fixed_factor s4_vclk2_div4 = {
+ .mult = 1,
+ .div = 4,
+ .hw.init = &(struct clk_init_data){
+ .name = "vclk2_div4",
+ .ops = &clk_fixed_factor_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &s4_vclk2_div4_en.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_fixed_factor s4_vclk2_div6 = {
+ .mult = 1,
+ .div = 6,
+ .hw.init = &(struct clk_init_data){
+ .name = "vclk2_div6",
+ .ops = &clk_fixed_factor_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &s4_vclk2_div6_en.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_fixed_factor s4_vclk2_div12 = {
+ .mult = 1,
+ .div = 12,
+ .hw.init = &(struct clk_init_data){
+ .name = "vclk2_div12",
+ .ops = &clk_fixed_factor_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &s4_vclk2_div12_en.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+/* The 5,6,7 indexes corresponds to no real clock, so there are not used. */
+static u32 mux_table_cts_sel[] = { 0, 1, 2, 3, 4, 8, 9, 10, 11, 12 };
+static const struct clk_hw *s4_cts_parent_hws[] = {
+ &s4_vclk_div1.hw,
+ &s4_vclk_div2.hw,
+ &s4_vclk_div4.hw,
+ &s4_vclk_div6.hw,
+ &s4_vclk_div12.hw,
+ &s4_vclk2_div1.hw,
+ &s4_vclk2_div2.hw,
+ &s4_vclk2_div4.hw,
+ &s4_vclk2_div6.hw,
+ &s4_vclk2_div12.hw
+};
+
+static struct clk_regmap s4_cts_enci_sel = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = CLKCTRL_VID_CLK_DIV,
+ .mask = 0xf,
+ .shift = 28,
+ .table = mux_table_cts_sel,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "cts_enci_sel",
+ .ops = &clk_regmap_mux_ops,
+ .parent_hws = s4_cts_parent_hws,
+ .num_parents = ARRAY_SIZE(s4_cts_parent_hws),
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_cts_encp_sel = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = CLKCTRL_VID_CLK_DIV,
+ .mask = 0xf,
+ .shift = 20,
+ .table = mux_table_cts_sel,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "cts_encp_sel",
+ .ops = &clk_regmap_mux_ops,
+ .parent_hws = s4_cts_parent_hws,
+ .num_parents = ARRAY_SIZE(s4_cts_parent_hws),
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_cts_vdac_sel = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = CLKCTRL_VIID_CLK_DIV,
+ .mask = 0xf,
+ .shift = 28,
+ .table = mux_table_cts_sel,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "cts_vdac_sel",
+ .ops = &clk_regmap_mux_ops,
+ .parent_hws = s4_cts_parent_hws,
+ .num_parents = ARRAY_SIZE(s4_cts_parent_hws),
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+/* The 5,6,7 indexes corresponds to no real clock, so there are not used. */
+static u32 mux_table_hdmi_tx_sel[] = { 0, 1, 2, 3, 4, 8, 9, 10, 11, 12 };
+static const struct clk_hw *s4_cts_hdmi_tx_parent_hws[] = {
+ &s4_vclk_div1.hw,
+ &s4_vclk_div2.hw,
+ &s4_vclk_div4.hw,
+ &s4_vclk_div6.hw,
+ &s4_vclk_div12.hw,
+ &s4_vclk2_div1.hw,
+ &s4_vclk2_div2.hw,
+ &s4_vclk2_div4.hw,
+ &s4_vclk2_div6.hw,
+ &s4_vclk2_div12.hw
+};
+
+static struct clk_regmap s4_hdmi_tx_sel = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = CLKCTRL_HDMI_CLK_CTRL,
+ .mask = 0xf,
+ .shift = 16,
+ .table = mux_table_hdmi_tx_sel,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "hdmi_tx_sel",
+ .ops = &clk_regmap_mux_ops,
+ .parent_hws = s4_cts_hdmi_tx_parent_hws,
+ .num_parents = ARRAY_SIZE(s4_cts_hdmi_tx_parent_hws),
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_cts_enci = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = CLKCTRL_VID_CLK_CTRL2,
+ .bit_idx = 0,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "cts_enci",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &s4_cts_enci_sel.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_cts_encp = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = CLKCTRL_VID_CLK_CTRL2,
+ .bit_idx = 2,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "cts_encp",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &s4_cts_encp_sel.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_cts_vdac = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = CLKCTRL_VID_CLK_CTRL2,
+ .bit_idx = 4,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "cts_vdac",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &s4_cts_vdac_sel.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_hdmi_tx = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = CLKCTRL_VID_CLK_CTRL2,
+ .bit_idx = 5,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "hdmi_tx",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &s4_hdmi_tx_sel.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+/* HDMI Clocks */
+static const struct clk_parent_data s4_hdmi_parent_data[] = {
+ { .fw_name = "xtal", },
+ { .fw_name = "fclk_div4", },
+ { .fw_name = "fclk_div3", },
+ { .fw_name = "fclk_div5", }
+};
+
+static struct clk_regmap s4_hdmi_sel = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = CLKCTRL_HDMI_CLK_CTRL,
+ .mask = 0x3,
+ .shift = 9,
+ .flags = CLK_MUX_ROUND_CLOSEST,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "hdmi_sel",
+ .ops = &clk_regmap_mux_ops,
+ .parent_data = s4_hdmi_parent_data,
+ .num_parents = ARRAY_SIZE(s4_hdmi_parent_data),
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_hdmi_div = {
+ .data = &(struct clk_regmap_div_data){
+ .offset = CLKCTRL_HDMI_CLK_CTRL,
+ .shift = 0,
+ .width = 7,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "hdmi_div",
+ .ops = &clk_regmap_divider_ops,
+ .parent_hws = (const struct clk_hw *[]) { &s4_hdmi_sel.hw },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_hdmi = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = CLKCTRL_HDMI_CLK_CTRL,
+ .bit_idx = 8,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "hdmi",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) { &s4_hdmi_div.hw },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_ts_clk_div = {
+ .data = &(struct clk_regmap_div_data){
+ .offset = CLKCTRL_TS_CLK_CTRL,
+ .shift = 0,
+ .width = 8,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "ts_clk_div",
+ .ops = &clk_regmap_divider_ops,
+ .parent_data = &(const struct clk_parent_data) {
+ .fw_name = "xtal",
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_ts_clk_gate = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = CLKCTRL_TS_CLK_CTRL,
+ .bit_idx = 8,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "ts_clk",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &s4_ts_clk_div.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+/*
+ * The MALI IP is clocked by two identical clocks (mali_0 and mali_1)
+ * muxed by a glitch-free switch. The CCF can manage this glitch-free
+ * mux because it does top-to-bottom updates the each clock tree and
+ * switches to the "inactive" one when CLK_SET_RATE_GATE is set.
+ */
+static const struct clk_parent_data s4_mali_0_1_parent_data[] = {
+ { .fw_name = "xtal", },
+ { .fw_name = "gp0_pll", },
+ { .fw_name = "hifi_pll", },
+ { .fw_name = "fclk_div2p5", },
+ { .fw_name = "fclk_div3", },
+ { .fw_name = "fclk_div4", },
+ { .fw_name = "fclk_div5", },
+ { .fw_name = "fclk_div7", }
+};
+
+static struct clk_regmap s4_mali_0_sel = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = CLKCTRL_MALI_CLK_CTRL,
+ .mask = 0x7,
+ .shift = 9,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "mali_0_sel",
+ .ops = &clk_regmap_mux_ops,
+ .parent_data = s4_mali_0_1_parent_data,
+ .num_parents = ARRAY_SIZE(s4_mali_0_1_parent_data),
+ /*
+ * Don't request the parent to change the rate because
+ * all GPU frequencies can be derived from the fclk_*
+ * clocks and one special GP0_PLL setting. This is
+ * important because we need the MPLL clocks for audio.
+ */
+ .flags = 0,
+ },
+};
+
+static struct clk_regmap s4_mali_0_div = {
+ .data = &(struct clk_regmap_div_data){
+ .offset = CLKCTRL_MALI_CLK_CTRL,
+ .shift = 0,
+ .width = 7,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "mali_0_div",
+ .ops = &clk_regmap_divider_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &s4_mali_0_sel.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_mali_0 = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = CLKCTRL_MALI_CLK_CTRL,
+ .bit_idx = 8,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "mali_0",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &s4_mali_0_div.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_mali_1_sel = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = CLKCTRL_MALI_CLK_CTRL,
+ .mask = 0x7,
+ .shift = 25,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "mali_1_sel",
+ .ops = &clk_regmap_mux_ops,
+ .parent_data = s4_mali_0_1_parent_data,
+ .num_parents = ARRAY_SIZE(s4_mali_0_1_parent_data),
+ .flags = 0,
+ },
+};
+
+static struct clk_regmap s4_mali_1_div = {
+ .data = &(struct clk_regmap_div_data){
+ .offset = CLKCTRL_MALI_CLK_CTRL,
+ .shift = 16,
+ .width = 7,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "mali_1_div",
+ .ops = &clk_regmap_divider_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &s4_mali_1_sel.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_mali_1 = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = CLKCTRL_MALI_CLK_CTRL,
+ .bit_idx = 24,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "mali_1",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &s4_mali_1_div.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static const struct clk_hw *s4_mali_parent_hws[] = {
+ &s4_mali_0.hw,
+ &s4_mali_1.hw
+};
+
+static struct clk_regmap s4_mali_mux = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = CLKCTRL_MALI_CLK_CTRL,
+ .mask = 1,
+ .shift = 31,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "mali",
+ .ops = &clk_regmap_mux_ops,
+ .parent_hws = s4_mali_parent_hws,
+ .num_parents = 2,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+/* VDEC clocks */
+static const struct clk_parent_data s4_dec_parent_data[] = {
+ { .fw_name = "fclk_div2p5", },
+ { .fw_name = "fclk_div3", },
+ { .fw_name = "fclk_div4", },
+ { .fw_name = "fclk_div5", },
+ { .fw_name = "fclk_div7", },
+ { .fw_name = "hifi_pll", },
+ { .fw_name = "gp0_pll", },
+ { .fw_name = "xtal", }
+};
+
+static struct clk_regmap s4_vdec_p0_mux = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = CLKCTRL_VDEC_CLK_CTRL,
+ .mask = 0x7,
+ .shift = 9,
+ .flags = CLK_MUX_ROUND_CLOSEST,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "vdec_p0_mux",
+ .ops = &clk_regmap_mux_ops,
+ .parent_data = s4_dec_parent_data,
+ .num_parents = ARRAY_SIZE(s4_dec_parent_data),
+ /*
+ * When the driver uses this clock, needs to specify the patent clock
+ * he wants in the dts.
+ */
+ .flags = CLK_SET_RATE_NO_REPARENT | CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_vdec_p0_div = {
+ .data = &(struct clk_regmap_div_data){
+ .offset = CLKCTRL_VDEC_CLK_CTRL,
+ .shift = 0,
+ .width = 7,
+ .flags = CLK_DIVIDER_ROUND_CLOSEST,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "vdec_p0_div",
+ .ops = &clk_regmap_divider_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &s4_vdec_p0_mux.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_vdec_p0 = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = CLKCTRL_VDEC_CLK_CTRL,
+ .bit_idx = 8,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "vdec_p0",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &s4_vdec_p0_div.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_vdec_p1_mux = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = CLKCTRL_VDEC3_CLK_CTRL,
+ .mask = 0x7,
+ .shift = 9,
+ .flags = CLK_MUX_ROUND_CLOSEST,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "vdec_p1_mux",
+ .ops = &clk_regmap_mux_ops,
+ .parent_data = s4_dec_parent_data,
+ .num_parents = ARRAY_SIZE(s4_dec_parent_data),
+ .flags = CLK_SET_RATE_NO_REPARENT | CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_vdec_p1_div = {
+ .data = &(struct clk_regmap_div_data){
+ .offset = CLKCTRL_VDEC3_CLK_CTRL,
+ .shift = 0,
+ .width = 7,
+ .flags = CLK_DIVIDER_ROUND_CLOSEST,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "vdec_p1_div",
+ .ops = &clk_regmap_divider_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &s4_vdec_p1_mux.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_vdec_p1 = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = CLKCTRL_VDEC3_CLK_CTRL,
+ .bit_idx = 8,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "vdec_p1",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &s4_vdec_p1_div.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static const struct clk_hw *s4_vdec_mux_parent_hws[] = {
+ &s4_vdec_p0.hw,
+ &s4_vdec_p1.hw
+};
+
+static struct clk_regmap s4_vdec_mux = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = CLKCTRL_VDEC3_CLK_CTRL,
+ .mask = 0x1,
+ .shift = 15,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "vdec_mux",
+ .ops = &clk_regmap_mux_ops,
+ .parent_hws = s4_vdec_mux_parent_hws,
+ .num_parents = ARRAY_SIZE(s4_vdec_mux_parent_hws),
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_hevcf_p0_mux = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = CLKCTRL_VDEC2_CLK_CTRL,
+ .mask = 0x7,
+ .shift = 9,
+ .flags = CLK_MUX_ROUND_CLOSEST,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "hevcf_p0_mux",
+ .ops = &clk_regmap_mux_ops,
+ .parent_data = s4_dec_parent_data,
+ .num_parents = ARRAY_SIZE(s4_dec_parent_data),
+ /*
+ * When the driver uses this clock, needs to specify the patent clock
+ * he wants in the dts.
+ */
+ .flags = CLK_SET_RATE_NO_REPARENT | CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_hevcf_p0_div = {
+ .data = &(struct clk_regmap_div_data){
+ .offset = CLKCTRL_VDEC2_CLK_CTRL,
+ .shift = 0,
+ .width = 7,
+ .flags = CLK_DIVIDER_ROUND_CLOSEST,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "hevcf_p0_div",
+ .ops = &clk_regmap_divider_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &s4_hevcf_p0_mux.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_hevcf_p0 = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = CLKCTRL_VDEC2_CLK_CTRL,
+ .bit_idx = 8,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "hevcf_p0_gate",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &s4_hevcf_p0_div.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_hevcf_p1_mux = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = CLKCTRL_VDEC4_CLK_CTRL,
+ .mask = 0x7,
+ .shift = 9,
+ .flags = CLK_MUX_ROUND_CLOSEST,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "hevcf_p1_mux",
+ .ops = &clk_regmap_mux_ops,
+ .parent_data = s4_dec_parent_data,
+ .num_parents = ARRAY_SIZE(s4_dec_parent_data),
+ .flags = CLK_SET_RATE_NO_REPARENT | CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_hevcf_p1_div = {
+ .data = &(struct clk_regmap_div_data){
+ .offset = CLKCTRL_VDEC4_CLK_CTRL,
+ .shift = 0,
+ .width = 7,
+ .flags = CLK_DIVIDER_ROUND_CLOSEST,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "hevcf_p1_div",
+ .ops = &clk_regmap_divider_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &s4_hevcf_p1_mux.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_hevcf_p1 = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = CLKCTRL_VDEC4_CLK_CTRL,
+ .bit_idx = 8,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "hevcf_p1",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &s4_hevcf_p1_div.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static const struct clk_hw *s4_hevcf_mux_parent_hws[] = {
+ &s4_hevcf_p0.hw,
+ &s4_hevcf_p1.hw
+};
+
+static struct clk_regmap s4_hevcf_mux = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = CLKCTRL_VDEC4_CLK_CTRL,
+ .mask = 0x1,
+ .shift = 15,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "hevcf",
+ .ops = &clk_regmap_mux_ops,
+ .parent_hws = s4_hevcf_mux_parent_hws,
+ .num_parents = ARRAY_SIZE(s4_hevcf_mux_parent_hws),
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+/* VPU Clock */
+static const struct clk_parent_data s4_vpu_parent_data[] = {
+ { .fw_name = "fclk_div3", },
+ { .fw_name = "fclk_div4", },
+ { .fw_name = "fclk_div5", },
+ { .fw_name = "fclk_div7", },
+ { .fw_name = "mpll1", },
+ { .hw = &s4_vid_pll.hw },
+ { .fw_name = "hifi_pll", },
+ { .fw_name = "gp0_pll", },
+};
+
+static struct clk_regmap s4_vpu_0_sel = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = CLKCTRL_VPU_CLK_CTRL,
+ .mask = 0x7,
+ .shift = 9,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "vpu_0_sel",
+ .ops = &clk_regmap_mux_ops,
+ .parent_data = s4_vpu_parent_data,
+ .num_parents = ARRAY_SIZE(s4_vpu_parent_data),
+ /*
+ * When the driver uses this clock, needs to specify the patent clock
+ * he wants in the dts.
+ */
+ .flags = CLK_SET_RATE_NO_REPARENT | CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_vpu_0_div = {
+ .data = &(struct clk_regmap_div_data){
+ .offset = CLKCTRL_VPU_CLK_CTRL,
+ .shift = 0,
+ .width = 7,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "vpu_0_div",
+ .ops = &clk_regmap_divider_ops,
+ .parent_hws = (const struct clk_hw *[]) { &s4_vpu_0_sel.hw },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_vpu_0 = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = CLKCTRL_VPU_CLK_CTRL,
+ .bit_idx = 8,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "vpu_0",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) { &s4_vpu_0_div.hw },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_vpu_1_sel = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = CLKCTRL_VPU_CLK_CTRL,
+ .mask = 0x7,
+ .shift = 25,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "vpu_1_sel",
+ .ops = &clk_regmap_mux_ops,
+ .parent_data = s4_vpu_parent_data,
+ .num_parents = ARRAY_SIZE(s4_vpu_parent_data),
+ .flags = CLK_SET_RATE_NO_REPARENT | CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_vpu_1_div = {
+ .data = &(struct clk_regmap_div_data){
+ .offset = CLKCTRL_VPU_CLK_CTRL,
+ .shift = 16,
+ .width = 7,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "vpu_1_div",
+ .ops = &clk_regmap_divider_ops,
+ .parent_hws = (const struct clk_hw *[]) { &s4_vpu_1_sel.hw },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_vpu_1 = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = CLKCTRL_VPU_CLK_CTRL,
+ .bit_idx = 24,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "vpu_1",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) { &s4_vpu_1_div.hw },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_vpu = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = CLKCTRL_VPU_CLK_CTRL,
+ .mask = 1,
+ .shift = 31,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "vpu",
+ .ops = &clk_regmap_mux_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &s4_vpu_0.hw,
+ &s4_vpu_1.hw,
+ },
+ .num_parents = 2,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static const struct clk_parent_data vpu_clkb_tmp_parent_data[] = {
+ { .hw = &s4_vpu.hw },
+ { .fw_name = "fclk_div4", },
+ { .fw_name = "fclk_div5", },
+ { .fw_name = "fclk_div7", }
+};
+
+static struct clk_regmap s4_vpu_clkb_tmp_mux = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = CLKCTRL_VPU_CLKB_CTRL,
+ .mask = 0x3,
+ .shift = 20,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "vpu_clkb_tmp_mux",
+ .ops = &clk_regmap_mux_ops,
+ .parent_data = vpu_clkb_tmp_parent_data,
+ .num_parents = ARRAY_SIZE(vpu_clkb_tmp_parent_data),
+ /*
+ * When the driver uses this clock, needs to specify the patent clock
+ * he wants in the dts.
+ */
+ .flags = CLK_SET_RATE_NO_REPARENT | CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_vpu_clkb_tmp_div = {
+ .data = &(struct clk_regmap_div_data){
+ .offset = CLKCTRL_VPU_CLKB_CTRL,
+ .shift = 16,
+ .width = 4,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "vpu_clkb_tmp_div",
+ .ops = &clk_regmap_divider_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &s4_vpu_clkb_tmp_mux.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_vpu_clkb_tmp = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = CLKCTRL_VPU_CLKB_CTRL,
+ .bit_idx = 24,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "vpu_clkb_tmp",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &s4_vpu_clkb_tmp_div.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_vpu_clkb_div = {
+ .data = &(struct clk_regmap_div_data){
+ .offset = CLKCTRL_VPU_CLKB_CTRL,
+ .shift = 0,
+ .width = 8,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "vpu_clkb_div",
+ .ops = &clk_regmap_divider_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &s4_vpu_clkb_tmp.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_vpu_clkb = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = CLKCTRL_VPU_CLKB_CTRL,
+ .bit_idx = 8,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "vpu_clkb",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &s4_vpu_clkb_div.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static const struct clk_parent_data s4_vpu_clkc_parent_data[] = {
+ { .fw_name = "fclk_div4", },
+ { .fw_name = "fclk_div3", },
+ { .fw_name = "fclk_div5", },
+ { .fw_name = "fclk_div7", },
+ { .fw_name = "mpll1", },
+ { .hw = &s4_vid_pll.hw },
+ { .fw_name = "mpll2", },
+ { .fw_name = "gp0_pll", },
+};
+
+static struct clk_regmap s4_vpu_clkc_p0_mux = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = CLKCTRL_VPU_CLKC_CTRL,
+ .mask = 0x7,
+ .shift = 9,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "vpu_clkc_p0_mux",
+ .ops = &clk_regmap_mux_ops,
+ .parent_data = s4_vpu_clkc_parent_data,
+ .num_parents = ARRAY_SIZE(s4_vpu_clkc_parent_data),
+ /*
+ * When the driver uses this clock, needs to specify the patent clock
+ * he wants in the dts.
+ */
+ .flags = CLK_SET_RATE_NO_REPARENT | CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_vpu_clkc_p0_div = {
+ .data = &(struct clk_regmap_div_data){
+ .offset = CLKCTRL_VPU_CLKC_CTRL,
+ .shift = 0,
+ .width = 7,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "vpu_clkc_p0_div",
+ .ops = &clk_regmap_divider_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &s4_vpu_clkc_p0_mux.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_vpu_clkc_p0 = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = CLKCTRL_VPU_CLKC_CTRL,
+ .bit_idx = 8,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "vpu_clkc_p0",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &s4_vpu_clkc_p0_div.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_vpu_clkc_p1_mux = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = CLKCTRL_VPU_CLKC_CTRL,
+ .mask = 0x7,
+ .shift = 25,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "vpu_clkc_p1_mux",
+ .ops = &clk_regmap_mux_ops,
+ .parent_data = s4_vpu_clkc_parent_data,
+ .num_parents = ARRAY_SIZE(s4_vpu_clkc_parent_data),
+ .flags = CLK_SET_RATE_NO_REPARENT | CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_vpu_clkc_p1_div = {
+ .data = &(struct clk_regmap_div_data){
+ .offset = CLKCTRL_VPU_CLKC_CTRL,
+ .shift = 16,
+ .width = 7,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "vpu_clkc_p1_div",
+ .ops = &clk_regmap_divider_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &s4_vpu_clkc_p1_mux.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_vpu_clkc_p1 = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = CLKCTRL_VPU_CLKC_CTRL,
+ .bit_idx = 24,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "vpu_clkc_p1",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &s4_vpu_clkc_p1_div.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static const struct clk_hw *s4_vpu_mux_parent_hws[] = {
+ &s4_vpu_clkc_p0.hw,
+ &s4_vpu_clkc_p1.hw
+};
+
+static struct clk_regmap s4_vpu_clkc_mux = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = CLKCTRL_VPU_CLKC_CTRL,
+ .mask = 0x1,
+ .shift = 31,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "vpu_clkc_mux",
+ .ops = &clk_regmap_mux_ops,
+ .parent_hws = s4_vpu_mux_parent_hws,
+ .num_parents = ARRAY_SIZE(s4_vpu_mux_parent_hws),
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+/* VAPB Clock */
+static const struct clk_parent_data s4_vapb_parent_data[] = {
+ { .fw_name = "fclk_div4", },
+ { .fw_name = "fclk_div3", },
+ { .fw_name = "fclk_div5", },
+ { .fw_name = "fclk_div7", },
+ { .fw_name = "mpll1", },
+ { .hw = &s4_vid_pll.hw },
+ { .fw_name = "mpll2", },
+ { .fw_name = "fclk_div2p5", },
+};
+
+static struct clk_regmap s4_vapb_0_sel = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = CLKCTRL_VAPBCLK_CTRL,
+ .mask = 0x7,
+ .shift = 9,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "vapb_0_sel",
+ .ops = &clk_regmap_mux_ops,
+ .parent_data = s4_vapb_parent_data,
+ .num_parents = ARRAY_SIZE(s4_vapb_parent_data),
+ /*
+ * When the driver uses this clock, needs to specify the patent clock
+ * he wants in the dts.
+ */
+ .flags = CLK_SET_RATE_NO_REPARENT | CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_vapb_0_div = {
+ .data = &(struct clk_regmap_div_data){
+ .offset = CLKCTRL_VAPBCLK_CTRL,
+ .shift = 0,
+ .width = 7,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "vapb_0_div",
+ .ops = &clk_regmap_divider_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &s4_vapb_0_sel.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_vapb_0 = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = CLKCTRL_VAPBCLK_CTRL,
+ .bit_idx = 8,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "vapb_0",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &s4_vapb_0_div.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_vapb_1_sel = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = CLKCTRL_VAPBCLK_CTRL,
+ .mask = 0x7,
+ .shift = 25,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "vapb_1_sel",
+ .ops = &clk_regmap_mux_ops,
+ .parent_data = s4_vapb_parent_data,
+ .num_parents = ARRAY_SIZE(s4_vapb_parent_data),
+ .flags = CLK_SET_RATE_NO_REPARENT | CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_vapb_1_div = {
+ .data = &(struct clk_regmap_div_data){
+ .offset = CLKCTRL_VAPBCLK_CTRL,
+ .shift = 16,
+ .width = 7,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "vapb_1_div",
+ .ops = &clk_regmap_divider_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &s4_vapb_1_sel.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_vapb_1 = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = CLKCTRL_VAPBCLK_CTRL,
+ .bit_idx = 24,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "vapb_1",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &s4_vapb_1_div.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_vapb = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = CLKCTRL_VAPBCLK_CTRL,
+ .mask = 1,
+ .shift = 31,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "vapb_sel",
+ .ops = &clk_regmap_mux_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &s4_vapb_0.hw,
+ &s4_vapb_1.hw
+ },
+ .num_parents = 2,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_ge2d_gate = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = CLKCTRL_VAPBCLK_CTRL,
+ .bit_idx = 30,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "ge2d_clk",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) { &s4_vapb.hw },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static const struct clk_parent_data s4_esmclk_parent_data[] = {
+ { .fw_name = "fclk_div7", },
+ { .fw_name = "fclk_div4", },
+ { .fw_name = "fclk_div3", },
+ { .fw_name = "fclk_div5", },
+};
+
+static struct clk_regmap s4_hdcp22_esmclk_mux = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = CLKCTRL_HDCP22_CTRL,
+ .mask = 0x3,
+ .shift = 9,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "hdcp22_esmclk_mux",
+ .ops = &clk_regmap_mux_ops,
+ .parent_data = s4_esmclk_parent_data,
+ .num_parents = ARRAY_SIZE(s4_esmclk_parent_data),
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_hdcp22_esmclk_div = {
+ .data = &(struct clk_regmap_div_data){
+ .offset = CLKCTRL_HDCP22_CTRL,
+ .shift = 0,
+ .width = 7,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "hdcp22_esmclk_div",
+ .ops = &clk_regmap_divider_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &s4_hdcp22_esmclk_mux.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_hdcp22_esmclk_gate = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = CLKCTRL_HDCP22_CTRL,
+ .bit_idx = 8,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "hdcp22_esmclk_gate",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &s4_hdcp22_esmclk_div.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static const struct clk_parent_data s4_skpclk_parent_data[] = {
+ { .fw_name = "xtal", },
+ { .fw_name = "fclk_div4", },
+ { .fw_name = "fclk_div3", },
+ { .fw_name = "fclk_div5", },
+};
+
+static struct clk_regmap s4_hdcp22_skpclk_mux = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = CLKCTRL_HDCP22_CTRL,
+ .mask = 0x3,
+ .shift = 25,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "hdcp22_skpclk_mux",
+ .ops = &clk_regmap_mux_ops,
+ .parent_data = s4_skpclk_parent_data,
+ .num_parents = ARRAY_SIZE(s4_skpclk_parent_data),
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_hdcp22_skpclk_div = {
+ .data = &(struct clk_regmap_div_data){
+ .offset = CLKCTRL_HDCP22_CTRL,
+ .shift = 16,
+ .width = 7,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "hdcp22_skpclk_div",
+ .ops = &clk_regmap_divider_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &s4_hdcp22_skpclk_mux.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_hdcp22_skpclk_gate = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = CLKCTRL_HDCP22_CTRL,
+ .bit_idx = 24,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "hdcp22_skpclk_gate",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &s4_hdcp22_skpclk_div.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static const struct clk_parent_data s4_vdin_parent_data[] = {
+ { .fw_name = "xtal", },
+ { .fw_name = "fclk_div4", },
+ { .fw_name = "fclk_div3", },
+ { .fw_name = "fclk_div5", },
+ { .hw = &s4_vid_pll.hw }
+};
+
+static struct clk_regmap s4_vdin_meas_mux = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = CLKCTRL_VDIN_MEAS_CLK_CTRL,
+ .mask = 0x7,
+ .shift = 9,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "vdin_meas_mux",
+ .ops = &clk_regmap_mux_ops,
+ .parent_data = s4_vdin_parent_data,
+ .num_parents = ARRAY_SIZE(s4_vdin_parent_data),
+ /*
+ * When the driver uses this clock, needs to specify the patent clock
+ * he wants in the dts.
+ */
+ .flags = CLK_SET_RATE_NO_REPARENT | CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_vdin_meas_div = {
+ .data = &(struct clk_regmap_div_data){
+ .offset = CLKCTRL_VDIN_MEAS_CLK_CTRL,
+ .shift = 0,
+ .width = 7,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "vdin_meas_div",
+ .ops = &clk_regmap_divider_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &s4_vdin_meas_mux.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_vdin_meas_gate = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = CLKCTRL_VDIN_MEAS_CLK_CTRL,
+ .bit_idx = 8,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "vdin_meas_gate",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &s4_vdin_meas_div.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+/* EMMC/NAND clock */
+static const struct clk_parent_data s4_sd_emmc_clk0_parent_data[] = {
+ { .fw_name = "xtal", },
+ { .fw_name = "fclk_div2", },
+ { .fw_name = "fclk_div3", },
+ { .fw_name = "hifi_pll", },
+ { .fw_name = "fclk_div2p5", },
+ { .fw_name = "mpll2", },
+ { .fw_name = "mpll3", },
+ { .fw_name = "gp0_pll", },
+};
+
+static struct clk_regmap s4_sd_emmc_c_clk0_sel = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = CLKCTRL_NAND_CLK_CTRL,
+ .mask = 0x7,
+ .shift = 9,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "sd_emmc_c_clk0_sel",
+ .ops = &clk_regmap_mux_ops,
+ .parent_data = s4_sd_emmc_clk0_parent_data,
+ .num_parents = ARRAY_SIZE(s4_sd_emmc_clk0_parent_data),
+ /*
+ * When the driver uses this clock, needs to specify the patent clock
+ * he wants in the dts.
+ */
+ .flags = CLK_SET_RATE_NO_REPARENT | CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_sd_emmc_c_clk0_div = {
+ .data = &(struct clk_regmap_div_data){
+ .offset = CLKCTRL_NAND_CLK_CTRL,
+ .shift = 0,
+ .width = 7,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "sd_emmc_c_clk0_div",
+ .ops = &clk_regmap_divider_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &s4_sd_emmc_c_clk0_sel.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_sd_emmc_c_clk0 = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = CLKCTRL_NAND_CLK_CTRL,
+ .bit_idx = 7,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "sd_emmc_c_clk0",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &s4_sd_emmc_c_clk0_div.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_sd_emmc_a_clk0_sel = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = CLKCTRL_SD_EMMC_CLK_CTRL,
+ .mask = 0x7,
+ .shift = 9,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "sd_emmc_a_clk0_sel",
+ .ops = &clk_regmap_mux_ops,
+ .parent_data = s4_sd_emmc_clk0_parent_data,
+ .num_parents = ARRAY_SIZE(s4_sd_emmc_clk0_parent_data),
+ },
+};
+
+static struct clk_regmap s4_sd_emmc_a_clk0_div = {
+ .data = &(struct clk_regmap_div_data){
+ .offset = CLKCTRL_SD_EMMC_CLK_CTRL,
+ .shift = 0,
+ .width = 7,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "sd_emmc_a_clk0_div",
+ .ops = &clk_regmap_divider_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &s4_sd_emmc_a_clk0_sel.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_sd_emmc_a_clk0 = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = CLKCTRL_SD_EMMC_CLK_CTRL,
+ .bit_idx = 7,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "sd_emmc_a_clk0",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &s4_sd_emmc_a_clk0_div.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_sd_emmc_b_clk0_sel = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = CLKCTRL_SD_EMMC_CLK_CTRL,
+ .mask = 0x7,
+ .shift = 25,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "sd_emmc_b_clk0_sel",
+ .ops = &clk_regmap_mux_ops,
+ .parent_data = s4_sd_emmc_clk0_parent_data,
+ .num_parents = ARRAY_SIZE(s4_sd_emmc_clk0_parent_data),
+ /*
+ * When the driver uses this clock, needs to specify the patent clock
+ * he wants in the dts.
+ */
+ .flags = CLK_SET_RATE_NO_REPARENT | CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_sd_emmc_b_clk0_div = {
+ .data = &(struct clk_regmap_div_data){
+ .offset = CLKCTRL_SD_EMMC_CLK_CTRL,
+ .shift = 16,
+ .width = 7,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "sd_emmc_b_clk0_div",
+ .ops = &clk_regmap_divider_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &s4_sd_emmc_b_clk0_sel.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_sd_emmc_b_clk0 = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = CLKCTRL_SD_EMMC_CLK_CTRL,
+ .bit_idx = 23,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "sd_emmc_b_clk0",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &s4_sd_emmc_b_clk0_div.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+/* SPICC Clock */
+static const struct clk_parent_data s4_spicc_parent_data[] = {
+ { .fw_name = "xtal", },
+ { .hw = &s4_sys_clk.hw },
+ { .fw_name = "fclk_div4", },
+ { .fw_name = "fclk_div3", },
+ { .fw_name = "fclk_div2", },
+ { .fw_name = "fclk_div5", },
+ { .fw_name = "fclk_div7", },
+};
+
+static struct clk_regmap s4_spicc0_mux = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = CLKCTRL_SPICC_CLK_CTRL,
+ .mask = 0x7,
+ .shift = 7,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "spicc0_mux",
+ .ops = &clk_regmap_mux_ops,
+ .parent_data = s4_spicc_parent_data,
+ .num_parents = ARRAY_SIZE(s4_spicc_parent_data),
+ /*
+ * When the driver uses this clock, needs to specify the patent clock
+ * he wants in the dts.
+ */
+ .flags = CLK_SET_RATE_NO_REPARENT | CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_spicc0_div = {
+ .data = &(struct clk_regmap_div_data){
+ .offset = CLKCTRL_SPICC_CLK_CTRL,
+ .shift = 0,
+ .width = 6,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "spicc0_div",
+ .ops = &clk_regmap_divider_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &s4_spicc0_mux.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_spicc0_gate = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = CLKCTRL_SPICC_CLK_CTRL,
+ .bit_idx = 6,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "spicc0",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &s4_spicc0_div.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+/* PWM Clock */
+static const struct clk_parent_data s4_pwm_parent_data[] = {
+ { .fw_name = "xtal", },
+ { .hw = &s4_vid_pll.hw },
+ { .fw_name = "fclk_div4", },
+ { .fw_name = "fclk_div3", },
+};
+
+static struct clk_regmap s4_pwm_a_mux = {
+ .data = &(struct clk_regmap_mux_data) {
+ .offset = CLKCTRL_PWM_CLK_AB_CTRL,
+ .mask = 0x3,
+ .shift = 9,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "pwm_a_mux",
+ .ops = &clk_regmap_mux_ops,
+ .parent_data = s4_pwm_parent_data,
+ .num_parents = ARRAY_SIZE(s4_pwm_parent_data),
+ /*
+ * When the driver uses this clock, needs to specify the patent clock
+ * he wants in the dts.
+ */
+ .flags = CLK_SET_RATE_NO_REPARENT | CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_pwm_a_div = {
+ .data = &(struct clk_regmap_div_data) {
+ .offset = CLKCTRL_PWM_CLK_AB_CTRL,
+ .shift = 0,
+ .width = 8,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "pwm_a_div",
+ .ops = &clk_regmap_divider_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &s4_pwm_a_mux.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_pwm_a_gate = {
+ .data = &(struct clk_regmap_gate_data) {
+ .offset = CLKCTRL_PWM_CLK_AB_CTRL,
+ .bit_idx = 8,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "pwm_a_gate",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &s4_pwm_a_div.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_pwm_b_mux = {
+ .data = &(struct clk_regmap_mux_data) {
+ .offset = CLKCTRL_PWM_CLK_AB_CTRL,
+ .mask = 0x3,
+ .shift = 25,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "pwm_b_mux",
+ .ops = &clk_regmap_mux_ops,
+ .parent_data = s4_pwm_parent_data,
+ .num_parents = ARRAY_SIZE(s4_pwm_parent_data),
+ .flags = CLK_SET_RATE_NO_REPARENT | CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_pwm_b_div = {
+ .data = &(struct clk_regmap_div_data) {
+ .offset = CLKCTRL_PWM_CLK_AB_CTRL,
+ .shift = 16,
+ .width = 8,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "pwm_b_div",
+ .ops = &clk_regmap_divider_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &s4_pwm_b_mux.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_pwm_b_gate = {
+ .data = &(struct clk_regmap_gate_data) {
+ .offset = CLKCTRL_PWM_CLK_AB_CTRL,
+ .bit_idx = 24,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "pwm_b_gate",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &s4_pwm_b_div.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_pwm_c_mux = {
+ .data = &(struct clk_regmap_mux_data) {
+ .offset = CLKCTRL_PWM_CLK_CD_CTRL,
+ .mask = 0x3,
+ .shift = 9,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "pwm_c_mux",
+ .ops = &clk_regmap_mux_ops,
+ .parent_data = s4_pwm_parent_data,
+ .num_parents = ARRAY_SIZE(s4_pwm_parent_data),
+ .flags = CLK_SET_RATE_NO_REPARENT | CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_pwm_c_div = {
+ .data = &(struct clk_regmap_div_data) {
+ .offset = CLKCTRL_PWM_CLK_CD_CTRL,
+ .shift = 0,
+ .width = 8,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "pwm_c_div",
+ .ops = &clk_regmap_divider_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &s4_pwm_c_mux.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_pwm_c_gate = {
+ .data = &(struct clk_regmap_gate_data) {
+ .offset = CLKCTRL_PWM_CLK_CD_CTRL,
+ .bit_idx = 8,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "pwm_c_gate",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &s4_pwm_c_div.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_pwm_d_mux = {
+ .data = &(struct clk_regmap_mux_data) {
+ .offset = CLKCTRL_PWM_CLK_CD_CTRL,
+ .mask = 0x3,
+ .shift = 25,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "pwm_d_mux",
+ .ops = &clk_regmap_mux_ops,
+ .parent_data = s4_pwm_parent_data,
+ .num_parents = ARRAY_SIZE(s4_pwm_parent_data),
+ .flags = CLK_SET_RATE_NO_REPARENT | CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_pwm_d_div = {
+ .data = &(struct clk_regmap_div_data) {
+ .offset = CLKCTRL_PWM_CLK_CD_CTRL,
+ .shift = 16,
+ .width = 8,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "pwm_d_div",
+ .ops = &clk_regmap_divider_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &s4_pwm_d_mux.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_pwm_d_gate = {
+ .data = &(struct clk_regmap_gate_data) {
+ .offset = CLKCTRL_PWM_CLK_CD_CTRL,
+ .bit_idx = 24,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "pwm_d_gate",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &s4_pwm_d_div.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_pwm_e_mux = {
+ .data = &(struct clk_regmap_mux_data) {
+ .offset = CLKCTRL_PWM_CLK_EF_CTRL,
+ .mask = 0x3,
+ .shift = 9,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "pwm_e_mux",
+ .ops = &clk_regmap_mux_ops,
+ .parent_data = s4_pwm_parent_data,
+ .num_parents = ARRAY_SIZE(s4_pwm_parent_data),
+ .flags = CLK_SET_RATE_NO_REPARENT | CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_pwm_e_div = {
+ .data = &(struct clk_regmap_div_data) {
+ .offset = CLKCTRL_PWM_CLK_EF_CTRL,
+ .shift = 0,
+ .width = 8,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "pwm_e_div",
+ .ops = &clk_regmap_divider_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &s4_pwm_e_mux.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_pwm_e_gate = {
+ .data = &(struct clk_regmap_gate_data) {
+ .offset = CLKCTRL_PWM_CLK_EF_CTRL,
+ .bit_idx = 8,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "pwm_e_gate",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &s4_pwm_e_div.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_pwm_f_mux = {
+ .data = &(struct clk_regmap_mux_data) {
+ .offset = CLKCTRL_PWM_CLK_EF_CTRL,
+ .mask = 0x3,
+ .shift = 25,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "pwm_f_mux",
+ .ops = &clk_regmap_mux_ops,
+ .parent_data = s4_pwm_parent_data,
+ .num_parents = ARRAY_SIZE(s4_pwm_parent_data),
+ .flags = CLK_SET_RATE_NO_REPARENT | CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_pwm_f_div = {
+ .data = &(struct clk_regmap_div_data) {
+ .offset = CLKCTRL_PWM_CLK_EF_CTRL,
+ .shift = 16,
+ .width = 8,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "pwm_f_div",
+ .ops = &clk_regmap_divider_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &s4_pwm_f_mux.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_pwm_f_gate = {
+ .data = &(struct clk_regmap_gate_data) {
+ .offset = CLKCTRL_PWM_CLK_EF_CTRL,
+ .bit_idx = 24,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "pwm_f_gate",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &s4_pwm_f_div.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_pwm_g_mux = {
+ .data = &(struct clk_regmap_mux_data) {
+ .offset = CLKCTRL_PWM_CLK_GH_CTRL,
+ .mask = 0x3,
+ .shift = 9,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "pwm_g_mux",
+ .ops = &clk_regmap_mux_ops,
+ .parent_data = s4_pwm_parent_data,
+ .num_parents = ARRAY_SIZE(s4_pwm_parent_data),
+ .flags = CLK_SET_RATE_NO_REPARENT | CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_pwm_g_div = {
+ .data = &(struct clk_regmap_div_data) {
+ .offset = CLKCTRL_PWM_CLK_GH_CTRL,
+ .shift = 0,
+ .width = 8,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "pwm_g_div",
+ .ops = &clk_regmap_divider_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &s4_pwm_g_mux.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_pwm_g_gate = {
+ .data = &(struct clk_regmap_gate_data) {
+ .offset = CLKCTRL_PWM_CLK_GH_CTRL,
+ .bit_idx = 8,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "pwm_g_gate",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &s4_pwm_g_div.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_pwm_h_mux = {
+ .data = &(struct clk_regmap_mux_data) {
+ .offset = CLKCTRL_PWM_CLK_GH_CTRL,
+ .mask = 0x3,
+ .shift = 25,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "pwm_h_mux",
+ .ops = &clk_regmap_mux_ops,
+ .parent_data = s4_pwm_parent_data,
+ .num_parents = ARRAY_SIZE(s4_pwm_parent_data),
+ .flags = CLK_SET_RATE_NO_REPARENT | CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_pwm_h_div = {
+ .data = &(struct clk_regmap_div_data) {
+ .offset = CLKCTRL_PWM_CLK_GH_CTRL,
+ .shift = 16,
+ .width = 8,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "pwm_h_div",
+ .ops = &clk_regmap_divider_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &s4_pwm_h_mux.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_pwm_h_gate = {
+ .data = &(struct clk_regmap_gate_data) {
+ .offset = CLKCTRL_PWM_CLK_GH_CTRL,
+ .bit_idx = 24,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "pwm_h_gate",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &s4_pwm_h_div.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_pwm_i_mux = {
+ .data = &(struct clk_regmap_mux_data) {
+ .offset = CLKCTRL_PWM_CLK_IJ_CTRL,
+ .mask = 0x3,
+ .shift = 9,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "pwm_i_mux",
+ .ops = &clk_regmap_mux_ops,
+ .parent_data = s4_pwm_parent_data,
+ .num_parents = ARRAY_SIZE(s4_pwm_parent_data),
+ .flags = CLK_SET_RATE_NO_REPARENT | CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_pwm_i_div = {
+ .data = &(struct clk_regmap_div_data) {
+ .offset = CLKCTRL_PWM_CLK_IJ_CTRL,
+ .shift = 0,
+ .width = 8,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "pwm_i_div",
+ .ops = &clk_regmap_divider_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &s4_pwm_i_mux.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_pwm_i_gate = {
+ .data = &(struct clk_regmap_gate_data) {
+ .offset = CLKCTRL_PWM_CLK_IJ_CTRL,
+ .bit_idx = 8,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "pwm_i_gate",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &s4_pwm_i_div.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_pwm_j_mux = {
+ .data = &(struct clk_regmap_mux_data) {
+ .offset = CLKCTRL_PWM_CLK_IJ_CTRL,
+ .mask = 0x3,
+ .shift = 25,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "pwm_j_mux",
+ .ops = &clk_regmap_mux_ops,
+ .parent_data = s4_pwm_parent_data,
+ .num_parents = ARRAY_SIZE(s4_pwm_parent_data),
+ .flags = CLK_SET_RATE_NO_REPARENT | CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_pwm_j_div = {
+ .data = &(struct clk_regmap_div_data) {
+ .offset = CLKCTRL_PWM_CLK_IJ_CTRL,
+ .shift = 16,
+ .width = 8,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "pwm_j_div",
+ .ops = &clk_regmap_divider_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &s4_pwm_h_mux.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_pwm_j_gate = {
+ .data = &(struct clk_regmap_gate_data) {
+ .offset = CLKCTRL_PWM_CLK_IJ_CTRL,
+ .bit_idx = 24,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "pwm_j_gate",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &s4_pwm_j_div.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_saradc_mux = {
+ .data = &(struct clk_regmap_mux_data) {
+ .offset = CLKCTRL_SAR_CLK_CTRL,
+ .mask = 0x3,
+ .shift = 9,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "saradc_mux",
+ .ops = &clk_regmap_mux_ops,
+ .parent_data = (const struct clk_parent_data []) {
+ { .fw_name = "xtal", },
+ { .hw = &s4_sys_clk.hw },
+ },
+ .num_parents = 2,
+ /*
+ * When the driver uses this clock, needs to specify the patent clock
+ * he wants in the dts.
+ */
+ .flags = CLK_SET_RATE_NO_REPARENT | CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_saradc_div = {
+ .data = &(struct clk_regmap_div_data) {
+ .offset = CLKCTRL_SAR_CLK_CTRL,
+ .shift = 0,
+ .width = 8,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "saradc_div",
+ .ops = &clk_regmap_divider_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &s4_saradc_mux.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_saradc_gate = {
+ .data = &(struct clk_regmap_gate_data) {
+ .offset = CLKCTRL_SAR_CLK_CTRL,
+ .bit_idx = 8,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "saradc_clk",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &s4_saradc_div.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+/*
+ * gen clk is designed for debug/monitor some internal clock quality. Some of the
+ * corresponding clock sources are not described in the clock tree and internal clock
+ * for debug, so they are skipped.
+ */
+static u32 s4_gen_clk_mux_table[] = { 0, 4, 5, 7, 19, 21, 22,
+ 23, 24, 25, 26, 27, 28 };
+static const struct clk_parent_data s4_gen_clk_parent_data[] = {
+ { .fw_name = "xtal", },
+ { .hw = &s4_vid_pll.hw },
+ { .fw_name = "gp0_pll", },
+ { .fw_name = "hifi_pll", },
+ { .fw_name = "fclk_div2", },
+ { .fw_name = "fclk_div3", },
+ { .fw_name = "fclk_div4", },
+ { .fw_name = "fclk_div5", },
+ { .fw_name = "fclk_div7", },
+ { .fw_name = "mpll0", },
+ { .fw_name = "mpll1", },
+ { .fw_name = "mpll2", },
+ { .fw_name = "mpll3", },
+};
+
+static struct clk_regmap s4_gen_clk_sel = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = CLKCTRL_GEN_CLK_CTRL,
+ .mask = 0x1f,
+ .shift = 12,
+ .table = s4_gen_clk_mux_table,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "gen_clk_sel",
+ .ops = &clk_regmap_mux_ops,
+ .parent_data = s4_gen_clk_parent_data,
+ .num_parents = ARRAY_SIZE(s4_gen_clk_parent_data),
+ },
+};
+
+static struct clk_regmap s4_gen_clk_div = {
+ .data = &(struct clk_regmap_div_data){
+ .offset = CLKCTRL_GEN_CLK_CTRL,
+ .shift = 0,
+ .width = 11,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "gen_clk_div",
+ .ops = &clk_regmap_divider_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &s4_gen_clk_sel.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_gen_clk = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = CLKCTRL_GEN_CLK_CTRL,
+ .bit_idx = 11,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "gen_clk",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &s4_gen_clk_div.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT | CLK_GET_RATE_NOCACHE,
+ },
+};
+
+static const struct clk_parent_data s4_adc_extclk_in_parent_data[] = {
+ { .fw_name = "xtal", },
+ { .fw_name = "fclk_div4", },
+ { .fw_name = "fclk_div3", },
+ { .fw_name = "fclk_div5", },
+ { .fw_name = "fclk_div7", },
+ { .fw_name = "mpll2", },
+ { .fw_name = "gp0_pll", },
+ { .fw_name = "hifi_pll", },
+};
+
+static struct clk_regmap s4_adc_extclk_in_mux = {
+ .data = &(struct clk_regmap_mux_data) {
+ .offset = CLKCTRL_DEMOD_CLK_CTRL,
+ .mask = 0x7,
+ .shift = 25,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "adc_extclk_in_mux",
+ .ops = &clk_regmap_mux_ops,
+ .parent_data = s4_adc_extclk_in_parent_data,
+ .num_parents = ARRAY_SIZE(s4_adc_extclk_in_parent_data),
+ /*
+ * When the driver uses this clock, needs to specify the patent clock
+ * he wants in the dts.
+ */
+ .flags = CLK_SET_RATE_NO_REPARENT | CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_adc_extclk_in_div = {
+ .data = &(struct clk_regmap_div_data) {
+ .offset = CLKCTRL_DEMOD_CLK_CTRL,
+ .shift = 16,
+ .width = 7,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "adc_extclk_in_div",
+ .ops = &clk_regmap_divider_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &s4_adc_extclk_in_mux.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_adc_extclk_in_gate = {
+ .data = &(struct clk_regmap_gate_data) {
+ .offset = CLKCTRL_DEMOD_CLK_CTRL,
+ .bit_idx = 24,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "adc_extclk_in",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &s4_adc_extclk_in_div.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_demod_core_clk_mux = {
+ .data = &(struct clk_regmap_mux_data) {
+ .offset = CLKCTRL_DEMOD_CLK_CTRL,
+ .mask = 0x3,
+ .shift = 9,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "demod_core_clk_mux",
+ .ops = &clk_regmap_mux_ops,
+ .parent_data = (const struct clk_parent_data []) {
+ { .fw_name = "xtal", },
+ { .fw_name = "fclk_div7", },
+ { .fw_name = "fclk_div4", },
+ { .hw = &s4_adc_extclk_in_gate.hw }
+ },
+ .num_parents = 4,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_demod_core_clk_div = {
+ .data = &(struct clk_regmap_div_data) {
+ .offset = CLKCTRL_DEMOD_CLK_CTRL,
+ .shift = 0,
+ .width = 7,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "demod_core_clk_div",
+ .ops = &clk_regmap_divider_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &s4_demod_core_clk_mux.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_demod_core_clk_gate = {
+ .data = &(struct clk_regmap_gate_data) {
+ .offset = CLKCTRL_DEMOD_CLK_CTRL,
+ .bit_idx = 8,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "demod_core_clk",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &s4_demod_core_clk_div.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+#define MESON_GATE(_name, _reg, _bit) \
+ MESON_PCLK(_name, _reg, _bit, &s4_sys_clk.hw)
+
+static MESON_GATE(s4_ddr, CLKCTRL_SYS_CLK_EN0_REG0, 0);
+static MESON_GATE(s4_dos, CLKCTRL_SYS_CLK_EN0_REG0, 1);
+static MESON_GATE(s4_ethphy, CLKCTRL_SYS_CLK_EN0_REG0, 4);
+static MESON_GATE(s4_mali, CLKCTRL_SYS_CLK_EN0_REG0, 6);
+static MESON_GATE(s4_aocpu, CLKCTRL_SYS_CLK_EN0_REG0, 13);
+static MESON_GATE(s4_aucpu, CLKCTRL_SYS_CLK_EN0_REG0, 14);
+static MESON_GATE(s4_cec, CLKCTRL_SYS_CLK_EN0_REG0, 16);
+static MESON_GATE(s4_sdemmca, CLKCTRL_SYS_CLK_EN0_REG0, 24);
+static MESON_GATE(s4_sdemmcb, CLKCTRL_SYS_CLK_EN0_REG0, 25);
+static MESON_GATE(s4_nand, CLKCTRL_SYS_CLK_EN0_REG0, 26);
+static MESON_GATE(s4_smartcard, CLKCTRL_SYS_CLK_EN0_REG0, 27);
+static MESON_GATE(s4_acodec, CLKCTRL_SYS_CLK_EN0_REG0, 28);
+static MESON_GATE(s4_spifc, CLKCTRL_SYS_CLK_EN0_REG0, 29);
+static MESON_GATE(s4_msr_clk, CLKCTRL_SYS_CLK_EN0_REG0, 30);
+static MESON_GATE(s4_ir_ctrl, CLKCTRL_SYS_CLK_EN0_REG0, 31);
+static MESON_GATE(s4_audio, CLKCTRL_SYS_CLK_EN0_REG1, 0);
+static MESON_GATE(s4_eth, CLKCTRL_SYS_CLK_EN0_REG1, 3);
+static MESON_GATE(s4_uart_a, CLKCTRL_SYS_CLK_EN0_REG1, 5);
+static MESON_GATE(s4_uart_b, CLKCTRL_SYS_CLK_EN0_REG1, 6);
+static MESON_GATE(s4_uart_c, CLKCTRL_SYS_CLK_EN0_REG1, 7);
+static MESON_GATE(s4_uart_d, CLKCTRL_SYS_CLK_EN0_REG1, 8);
+static MESON_GATE(s4_uart_e, CLKCTRL_SYS_CLK_EN0_REG1, 9);
+static MESON_GATE(s4_aififo, CLKCTRL_SYS_CLK_EN0_REG1, 11);
+static MESON_GATE(s4_ts_ddr, CLKCTRL_SYS_CLK_EN0_REG1, 15);
+static MESON_GATE(s4_ts_pll, CLKCTRL_SYS_CLK_EN0_REG1, 16);
+static MESON_GATE(s4_g2d, CLKCTRL_SYS_CLK_EN0_REG1, 20);
+static MESON_GATE(s4_spicc0, CLKCTRL_SYS_CLK_EN0_REG1, 21);
+static MESON_GATE(s4_usb, CLKCTRL_SYS_CLK_EN0_REG1, 26);
+static MESON_GATE(s4_i2c_m_a, CLKCTRL_SYS_CLK_EN0_REG1, 30);
+static MESON_GATE(s4_i2c_m_b, CLKCTRL_SYS_CLK_EN0_REG1, 31);
+static MESON_GATE(s4_i2c_m_c, CLKCTRL_SYS_CLK_EN0_REG2, 0);
+static MESON_GATE(s4_i2c_m_d, CLKCTRL_SYS_CLK_EN0_REG2, 1);
+static MESON_GATE(s4_i2c_m_e, CLKCTRL_SYS_CLK_EN0_REG2, 2);
+static MESON_GATE(s4_hdmitx_apb, CLKCTRL_SYS_CLK_EN0_REG2, 4);
+static MESON_GATE(s4_i2c_s_a, CLKCTRL_SYS_CLK_EN0_REG2, 5);
+static MESON_GATE(s4_usb1_to_ddr, CLKCTRL_SYS_CLK_EN0_REG2, 8);
+static MESON_GATE(s4_hdcp22, CLKCTRL_SYS_CLK_EN0_REG2, 10);
+static MESON_GATE(s4_mmc_apb, CLKCTRL_SYS_CLK_EN0_REG2, 11);
+static MESON_GATE(s4_rsa, CLKCTRL_SYS_CLK_EN0_REG2, 18);
+static MESON_GATE(s4_cpu_debug, CLKCTRL_SYS_CLK_EN0_REG2, 19);
+static MESON_GATE(s4_vpu_intr, CLKCTRL_SYS_CLK_EN0_REG2, 25);
+static MESON_GATE(s4_demod, CLKCTRL_SYS_CLK_EN0_REG2, 27);
+static MESON_GATE(s4_sar_adc, CLKCTRL_SYS_CLK_EN0_REG2, 28);
+static MESON_GATE(s4_gic, CLKCTRL_SYS_CLK_EN0_REG2, 30);
+static MESON_GATE(s4_pwm_ab, CLKCTRL_SYS_CLK_EN0_REG3, 7);
+static MESON_GATE(s4_pwm_cd, CLKCTRL_SYS_CLK_EN0_REG3, 8);
+static MESON_GATE(s4_pwm_ef, CLKCTRL_SYS_CLK_EN0_REG3, 9);
+static MESON_GATE(s4_pwm_gh, CLKCTRL_SYS_CLK_EN0_REG3, 10);
+static MESON_GATE(s4_pwm_ij, CLKCTRL_SYS_CLK_EN0_REG3, 11);
+
+/* Array of all clocks provided by this provider */
+static struct clk_hw_onecell_data s4_periphs_hw_onecell_data = {
+ .hws = {
+ [CLKID_RTC_32K_CLKIN] = &s4_rtc_32k_by_oscin_clkin.hw,
+ [CLKID_RTC_32K_DIV] = &s4_rtc_32k_by_oscin_div.hw,
+ [CLKID_RTC_32K_SEL] = &s4_rtc_32k_by_oscin_sel.hw,
+ [CLKID_RTC_32K_XATL] = &s4_rtc_32k_by_oscin.hw,
+ [CLKID_RTC_CLK] = &s4_rtc_clk.hw,
+ [CLKID_SYS_CLK_B_SEL] = &s4_sysclk_b_sel.hw,
+ [CLKID_SYS_CLK_B_DIV] = &s4_sysclk_b_div.hw,
+ [CLKID_SYS_CLK_B_GATE] = &s4_sysclk_b.hw,
+ [CLKID_SYS_CLK_A_SEL] = &s4_sysclk_a_sel.hw,
+ [CLKID_SYS_CLK_A_DIV] = &s4_sysclk_a_div.hw,
+ [CLKID_SYS_CLK_A_GATE] = &s4_sysclk_a.hw,
+ [CLKID_SYS_CLK] = &s4_sys_clk.hw,
+ [CLKID_CECA_32K_CLKIN] = &s4_ceca_32k_clkin.hw,
+ [CLKID_CECA_32K_DIV] = &s4_ceca_32k_div.hw,
+ [CLKID_CECA_32K_SEL_PRE] = &s4_ceca_32k_sel_pre.hw,
+ [CLKID_CECA_32K_SEL] = &s4_ceca_32k_sel.hw,
+ [CLKID_CECA_32K_CLKOUT] = &s4_ceca_32k_clkout.hw,
+ [CLKID_CECB_32K_CLKIN] = &s4_cecb_32k_clkin.hw,
+ [CLKID_CECB_32K_DIV] = &s4_cecb_32k_div.hw,
+ [CLKID_CECB_32K_SEL_PRE] = &s4_cecb_32k_sel_pre.hw,
+ [CLKID_CECB_32K_SEL] = &s4_cecb_32k_sel.hw,
+ [CLKID_CECB_32K_CLKOUT] = &s4_cecb_32k_clkout.hw,
+ [CLKID_SC_CLK_SEL] = &s4_sc_clk_mux.hw,
+ [CLKID_SC_CLK_DIV] = &s4_sc_clk_div.hw,
+ [CLKID_SC_CLK_GATE] = &s4_sc_clk_gate.hw,
+ [CLKID_12_24M_CLK_GATE] = &s4_12_24M_clk_gate.hw,
+ [CLKID_12M_CLK_DIV] = &s4_12M_clk_div.hw,
+ [CLKID_12_24M_CLK_SEL] = &s4_12_24M_clk.hw,
+ [CLKID_VID_PLL_DIV] = &s4_vid_pll_div.hw,
+ [CLKID_VID_PLL_SEL] = &s4_vid_pll_sel.hw,
+ [CLKID_VID_PLL] = &s4_vid_pll.hw,
+ [CLKID_VCLK_SEL] = &s4_vclk_sel.hw,
+ [CLKID_VCLK2_SEL] = &s4_vclk2_sel.hw,
+ [CLKID_VCLK_INPUT] = &s4_vclk_input.hw,
+ [CLKID_VCLK2_INPUT] = &s4_vclk2_input.hw,
+ [CLKID_VCLK_DIV] = &s4_vclk_div.hw,
+ [CLKID_VCLK2_DIV] = &s4_vclk2_div.hw,
+ [CLKID_VCLK] = &s4_vclk.hw,
+ [CLKID_VCLK2] = &s4_vclk2.hw,
+ [CLKID_VCLK_DIV1] = &s4_vclk_div1.hw,
+ [CLKID_VCLK_DIV2_EN] = &s4_vclk_div2_en.hw,
+ [CLKID_VCLK_DIV4_EN] = &s4_vclk_div4_en.hw,
+ [CLKID_VCLK_DIV6_EN] = &s4_vclk_div6_en.hw,
+ [CLKID_VCLK_DIV12_EN] = &s4_vclk_div12_en.hw,
+ [CLKID_VCLK2_DIV1] = &s4_vclk2_div1.hw,
+ [CLKID_VCLK2_DIV2_EN] = &s4_vclk2_div2_en.hw,
+ [CLKID_VCLK2_DIV4_EN] = &s4_vclk2_div4_en.hw,
+ [CLKID_VCLK2_DIV6_EN] = &s4_vclk2_div6_en.hw,
+ [CLKID_VCLK2_DIV12_EN] = &s4_vclk2_div12_en.hw,
+ [CLKID_VCLK_DIV2] = &s4_vclk_div2.hw,
+ [CLKID_VCLK_DIV4] = &s4_vclk_div4.hw,
+ [CLKID_VCLK_DIV6] = &s4_vclk_div6.hw,
+ [CLKID_VCLK_DIV12] = &s4_vclk_div12.hw,
+ [CLKID_VCLK2_DIV2] = &s4_vclk2_div2.hw,
+ [CLKID_VCLK2_DIV4] = &s4_vclk2_div4.hw,
+ [CLKID_VCLK2_DIV6] = &s4_vclk2_div6.hw,
+ [CLKID_VCLK2_DIV12] = &s4_vclk2_div12.hw,
+ [CLKID_CTS_ENCI_SEL] = &s4_cts_enci_sel.hw,
+ [CLKID_CTS_ENCP_SEL] = &s4_cts_encp_sel.hw,
+ [CLKID_CTS_VDAC_SEL] = &s4_cts_vdac_sel.hw,
+ [CLKID_HDMI_TX_SEL] = &s4_hdmi_tx_sel.hw,
+ [CLKID_CTS_ENCI] = &s4_cts_enci.hw,
+ [CLKID_CTS_ENCP] = &s4_cts_encp.hw,
+ [CLKID_CTS_VDAC] = &s4_cts_vdac.hw,
+ [CLKID_HDMI_TX] = &s4_hdmi_tx.hw,
+ [CLKID_HDMI_SEL] = &s4_hdmi_sel.hw,
+ [CLKID_HDMI_DIV] = &s4_hdmi_div.hw,
+ [CLKID_HDMI] = &s4_hdmi.hw,
+ [CLKID_TS_CLK_DIV] = &s4_ts_clk_div.hw,
+ [CLKID_TS_CLK_GATE] = &s4_ts_clk_gate.hw,
+ [CLKID_MALI_0_SEL] = &s4_mali_0_sel.hw,
+ [CLKID_MALI_0_DIV] = &s4_mali_0_div.hw,
+ [CLKID_MALI_0] = &s4_mali_0.hw,
+ [CLKID_MALI_1_SEL] = &s4_mali_1_sel.hw,
+ [CLKID_MALI_1_DIV] = &s4_mali_1_div.hw,
+ [CLKID_MALI_1] = &s4_mali_1.hw,
+ [CLKID_MALI] = &s4_mali_mux.hw,
+ [CLKID_VDEC_P0_SEL] = &s4_vdec_p0_mux.hw,
+ [CLKID_VDEC_P0_DIV] = &s4_vdec_p0_div.hw,
+ [CLKID_VDEC_P0] = &s4_vdec_p0.hw,
+ [CLKID_VDEC_P1_SEL] = &s4_vdec_p1_mux.hw,
+ [CLKID_VDEC_P1_DIV] = &s4_vdec_p1_div.hw,
+ [CLKID_VDEC_P1] = &s4_vdec_p1.hw,
+ [CLKID_VDEC_SEL] = &s4_vdec_mux.hw,
+ [CLKID_HEVCF_P0_SEL] = &s4_hevcf_p0_mux.hw,
+ [CLKID_HEVCF_P0_DIV] = &s4_hevcf_p0_div.hw,
+ [CLKID_HEVCF_P0] = &s4_hevcf_p0.hw,
+ [CLKID_HEVCF_P1_SEL] = &s4_hevcf_p1_mux.hw,
+ [CLKID_HEVCF_P1_DIV] = &s4_hevcf_p1_div.hw,
+ [CLKID_HEVCF_P1] = &s4_hevcf_p1.hw,
+ [CLKID_HEVCF_SEL] = &s4_hevcf_mux.hw,
+ [CLKID_VPU_0_SEL] = &s4_vpu_0_sel.hw,
+ [CLKID_VPU_0_DIV] = &s4_vpu_0_div.hw,
+ [CLKID_VPU_0] = &s4_vpu_0.hw,
+ [CLKID_VPU_1_SEL] = &s4_vpu_1_sel.hw,
+ [CLKID_VPU_1_DIV] = &s4_vpu_1_div.hw,
+ [CLKID_VPU_1] = &s4_vpu_1.hw,
+ [CLKID_VPU] = &s4_vpu.hw,
+ [CLKID_VPU_CLKB_TMP_SEL] = &s4_vpu_clkb_tmp_mux.hw,
+ [CLKID_VPU_CLKB_TMP_DIV] = &s4_vpu_clkb_tmp_div.hw,
+ [CLKID_VPU_CLKB_TMP] = &s4_vpu_clkb_tmp.hw,
+ [CLKID_VPU_CLKB_DIV] = &s4_vpu_clkb_div.hw,
+ [CLKID_VPU_CLKB] = &s4_vpu_clkb.hw,
+ [CLKID_VPU_CLKC_P0_SEL] = &s4_vpu_clkc_p0_mux.hw,
+ [CLKID_VPU_CLKC_P0_DIV] = &s4_vpu_clkc_p0_div.hw,
+ [CLKID_VPU_CLKC_P0] = &s4_vpu_clkc_p0.hw,
+ [CLKID_VPU_CLKC_P1_SEL] = &s4_vpu_clkc_p1_mux.hw,
+ [CLKID_VPU_CLKC_P1_DIV] = &s4_vpu_clkc_p1_div.hw,
+ [CLKID_VPU_CLKC_P1] = &s4_vpu_clkc_p1.hw,
+ [CLKID_VPU_CLKC_SEL] = &s4_vpu_clkc_mux.hw,
+ [CLKID_VAPB_0_SEL] = &s4_vapb_0_sel.hw,
+ [CLKID_VAPB_0_DIV] = &s4_vapb_0_div.hw,
+ [CLKID_VAPB_0] = &s4_vapb_0.hw,
+ [CLKID_VAPB_1_SEL] = &s4_vapb_1_sel.hw,
+ [CLKID_VAPB_1_DIV] = &s4_vapb_1_div.hw,
+ [CLKID_VAPB_1] = &s4_vapb_1.hw,
+ [CLKID_VAPB] = &s4_vapb.hw,
+ [CLKID_GE2D] = &s4_ge2d_gate.hw,
+ [CLKID_VDIN_MEAS_SEL] = &s4_vdin_meas_mux.hw,
+ [CLKID_VDIN_MEAS_DIV] = &s4_vdin_meas_div.hw,
+ [CLKID_VDIN_MEAS_GATE] = &s4_vdin_meas_gate.hw,
+ [CLKID_SD_EMMC_C_CLK_SEL] = &s4_sd_emmc_c_clk0_sel.hw,
+ [CLKID_SD_EMMC_C_CLK_DIV] = &s4_sd_emmc_c_clk0_div.hw,
+ [CLKID_SD_EMMC_C_CLK] = &s4_sd_emmc_c_clk0.hw,
+ [CLKID_SD_EMMC_A_CLK_SEL] = &s4_sd_emmc_a_clk0_sel.hw,
+ [CLKID_SD_EMMC_A_CLK_DIV] = &s4_sd_emmc_a_clk0_div.hw,
+ [CLKID_SD_EMMC_A_CLK] = &s4_sd_emmc_a_clk0.hw,
+ [CLKID_SD_EMMC_B_CLK_SEL] = &s4_sd_emmc_b_clk0_sel.hw,
+ [CLKID_SD_EMMC_B_CLK_DIV] = &s4_sd_emmc_b_clk0_div.hw,
+ [CLKID_SD_EMMC_B_CLK] = &s4_sd_emmc_b_clk0.hw,
+ [CLKID_SPICC0_SEL] = &s4_spicc0_mux.hw,
+ [CLKID_SPICC0_DIV] = &s4_spicc0_div.hw,
+ [CLKID_SPICC0_GATE] = &s4_spicc0_gate.hw,
+ [CLKID_PWM_A_SEL] = &s4_pwm_a_mux.hw,
+ [CLKID_PWM_A_DIV] = &s4_pwm_a_div.hw,
+ [CLKID_PWM_A_GATE] = &s4_pwm_a_gate.hw,
+ [CLKID_PWM_B_SEL] = &s4_pwm_b_mux.hw,
+ [CLKID_PWM_B_DIV] = &s4_pwm_b_div.hw,
+ [CLKID_PWM_B_GATE] = &s4_pwm_b_gate.hw,
+ [CLKID_PWM_C_SEL] = &s4_pwm_c_mux.hw,
+ [CLKID_PWM_C_DIV] = &s4_pwm_c_div.hw,
+ [CLKID_PWM_C_GATE] = &s4_pwm_c_gate.hw,
+ [CLKID_PWM_D_SEL] = &s4_pwm_d_mux.hw,
+ [CLKID_PWM_D_DIV] = &s4_pwm_d_div.hw,
+ [CLKID_PWM_D_GATE] = &s4_pwm_d_gate.hw,
+ [CLKID_PWM_E_SEL] = &s4_pwm_e_mux.hw,
+ [CLKID_PWM_E_DIV] = &s4_pwm_e_div.hw,
+ [CLKID_PWM_E_GATE] = &s4_pwm_e_gate.hw,
+ [CLKID_PWM_F_SEL] = &s4_pwm_f_mux.hw,
+ [CLKID_PWM_F_DIV] = &s4_pwm_f_div.hw,
+ [CLKID_PWM_F_GATE] = &s4_pwm_f_gate.hw,
+ [CLKID_PWM_G_SEL] = &s4_pwm_g_mux.hw,
+ [CLKID_PWM_G_DIV] = &s4_pwm_g_div.hw,
+ [CLKID_PWM_G_GATE] = &s4_pwm_g_gate.hw,
+ [CLKID_PWM_H_SEL] = &s4_pwm_h_mux.hw,
+ [CLKID_PWM_H_DIV] = &s4_pwm_h_div.hw,
+ [CLKID_PWM_H_GATE] = &s4_pwm_h_gate.hw,
+ [CLKID_PWM_I_SEL] = &s4_pwm_i_mux.hw,
+ [CLKID_PWM_I_DIV] = &s4_pwm_i_div.hw,
+ [CLKID_PWM_I_GATE] = &s4_pwm_i_gate.hw,
+ [CLKID_PWM_J_SEL] = &s4_pwm_j_mux.hw,
+ [CLKID_PWM_J_DIV] = &s4_pwm_j_div.hw,
+ [CLKID_PWM_J_GATE] = &s4_pwm_j_gate.hw,
+ [CLKID_SARADC_SEL] = &s4_saradc_mux.hw,
+ [CLKID_SARADC_DIV] = &s4_saradc_div.hw,
+ [CLKID_SARADC_GATE] = &s4_saradc_gate.hw,
+ [CLKID_GEN_SEL] = &s4_gen_clk_sel.hw,
+ [CLKID_GEN_DIV] = &s4_gen_clk_div.hw,
+ [CLKID_GEN_GATE] = &s4_gen_clk.hw,
+ [CLKID_DDR] = &s4_ddr.hw,
+ [CLKID_DOS] = &s4_dos.hw,
+ [CLKID_ETHPHY] = &s4_ethphy.hw,
+ [CLKID_MALI_GATE] = &s4_mali.hw,
+ [CLKID_AOCPU] = &s4_aocpu.hw,
+ [CLKID_AUCPU] = &s4_aucpu.hw,
+ [CLKID_CEC] = &s4_cec.hw,
+ [CLKID_SD_EMMC_A] = &s4_sdemmca.hw,
+ [CLKID_SD_EMMC_B] = &s4_sdemmcb.hw,
+ [CLKID_NAND] = &s4_nand.hw,
+ [CLKID_SMARTCARD] = &s4_smartcard.hw,
+ [CLKID_ACODEC] = &s4_acodec.hw,
+ [CLKID_SPIFC] = &s4_spifc.hw,
+ [CLKID_MSR_CLK] = &s4_msr_clk.hw,
+ [CLKID_IR_CTRL] = &s4_ir_ctrl.hw,
+ [CLKID_AUDIO] = &s4_audio.hw,
+ [CLKID_ETH] = &s4_eth.hw,
+ [CLKID_UART_A] = &s4_uart_a.hw,
+ [CLKID_UART_B] = &s4_uart_b.hw,
+ [CLKID_UART_C] = &s4_uart_c.hw,
+ [CLKID_UART_D] = &s4_uart_d.hw,
+ [CLKID_UART_E] = &s4_uart_e.hw,
+ [CLKID_AIFIFO] = &s4_aififo.hw,
+ [CLKID_TS_DDR] = &s4_ts_ddr.hw,
+ [CLKID_TS_PLL] = &s4_ts_pll.hw,
+ [CLKID_G2D] = &s4_g2d.hw,
+ [CLKID_SPICC0] = &s4_spicc0.hw,
+ [CLKID_USB] = &s4_usb.hw,
+ [CLKID_I2C_M_A] = &s4_i2c_m_a.hw,
+ [CLKID_I2C_M_B] = &s4_i2c_m_b.hw,
+ [CLKID_I2C_M_C] = &s4_i2c_m_c.hw,
+ [CLKID_I2C_M_D] = &s4_i2c_m_d.hw,
+ [CLKID_I2C_M_E] = &s4_i2c_m_e.hw,
+ [CLKID_HDMITX_APB] = &s4_hdmitx_apb.hw,
+ [CLKID_I2C_S_A] = &s4_i2c_s_a.hw,
+ [CLKID_USB1_TO_DDR] = &s4_usb1_to_ddr.hw,
+ [CLKID_HDCP22] = &s4_hdcp22.hw,
+ [CLKID_MMC_APB] = &s4_mmc_apb.hw,
+ [CLKID_RSA] = &s4_rsa.hw,
+ [CLKID_CPU_DEBUG] = &s4_cpu_debug.hw,
+ [CLKID_VPU_INTR] = &s4_vpu_intr.hw,
+ [CLKID_DEMOD] = &s4_demod.hw,
+ [CLKID_SAR_ADC] = &s4_sar_adc.hw,
+ [CLKID_GIC] = &s4_gic.hw,
+ [CLKID_PWM_AB] = &s4_pwm_ab.hw,
+ [CLKID_PWM_CD] = &s4_pwm_cd.hw,
+ [CLKID_PWM_EF] = &s4_pwm_ef.hw,
+ [CLKID_PWM_GH] = &s4_pwm_gh.hw,
+ [CLKID_PWM_IJ] = &s4_pwm_ij.hw,
+ [CLKID_HDCP22_ESMCLK_SEL] = &s4_hdcp22_esmclk_mux.hw,
+ [CLKID_HDCP22_ESMCLK_DIV] = &s4_hdcp22_esmclk_div.hw,
+ [CLKID_HDCP22_ESMCLK_GATE] = &s4_hdcp22_esmclk_gate.hw,
+ [CLKID_HDCP22_SKPCLK_SEL] = &s4_hdcp22_skpclk_mux.hw,
+ [CLKID_HDCP22_SKPCLK_DIV] = &s4_hdcp22_skpclk_div.hw,
+ [CLKID_HDCP22_SKPCLK_GATE] = &s4_hdcp22_skpclk_gate.hw,
+ [NR_CLKS] = NULL
+ },
+ .num = NR_CLKS,
+};
+
+/* Convenience table to populate regmap in .probe */
+static struct clk_regmap *const s4_periphs_clk_regmaps[] = {
+ &s4_rtc_32k_by_oscin_clkin,
+ &s4_rtc_32k_by_oscin_div,
+ &s4_rtc_32k_by_oscin_sel,
+ &s4_rtc_32k_by_oscin,
+ &s4_rtc_clk,
+ &s4_sysclk_b_sel,
+ &s4_sysclk_b_div,
+ &s4_sysclk_b,
+ &s4_sysclk_a_sel,
+ &s4_sysclk_a_div,
+ &s4_sysclk_a,
+ &s4_sys_clk,
+ &s4_ceca_32k_clkin,
+ &s4_ceca_32k_div,
+ &s4_ceca_32k_sel_pre,
+ &s4_ceca_32k_sel,
+ &s4_ceca_32k_clkout,
+ &s4_cecb_32k_clkin,
+ &s4_cecb_32k_div,
+ &s4_cecb_32k_sel_pre,
+ &s4_cecb_32k_sel,
+ &s4_cecb_32k_clkout,
+ &s4_sc_clk_mux,
+ &s4_sc_clk_div,
+ &s4_sc_clk_gate,
+ &s4_12_24M_clk_gate,
+ &s4_12_24M_clk,
+ &s4_vid_pll_div,
+ &s4_vid_pll_sel,
+ &s4_vid_pll,
+ &s4_vclk_sel,
+ &s4_vclk2_sel,
+ &s4_vclk_input,
+ &s4_vclk2_input,
+ &s4_vclk_div,
+ &s4_vclk2_div,
+ &s4_vclk,
+ &s4_vclk2,
+ &s4_vclk_div1,
+ &s4_vclk_div2_en,
+ &s4_vclk_div4_en,
+ &s4_vclk_div6_en,
+ &s4_vclk_div12_en,
+ &s4_vclk2_div1,
+ &s4_vclk2_div2_en,
+ &s4_vclk2_div4_en,
+ &s4_vclk2_div6_en,
+ &s4_vclk2_div12_en,
+ &s4_cts_enci_sel,
+ &s4_cts_encp_sel,
+ &s4_cts_vdac_sel,
+ &s4_hdmi_tx_sel,
+ &s4_cts_enci,
+ &s4_cts_encp,
+ &s4_cts_vdac,
+ &s4_hdmi_tx,
+ &s4_hdmi_sel,
+ &s4_hdmi_div,
+ &s4_hdmi,
+ &s4_ts_clk_div,
+ &s4_ts_clk_gate,
+ &s4_mali_0_sel,
+ &s4_mali_0_div,
+ &s4_mali_0,
+ &s4_mali_1_sel,
+ &s4_mali_1_div,
+ &s4_mali_1,
+ &s4_mali_mux,
+ &s4_vdec_p0_mux,
+ &s4_vdec_p0_div,
+ &s4_vdec_p0,
+ &s4_vdec_p1_mux,
+ &s4_vdec_p1_div,
+ &s4_vdec_p1,
+ &s4_vdec_mux,
+ &s4_hevcf_p0_mux,
+ &s4_hevcf_p0_div,
+ &s4_hevcf_p0,
+ &s4_hevcf_p1_mux,
+ &s4_hevcf_p1_div,
+ &s4_hevcf_p1,
+ &s4_hevcf_mux,
+ &s4_vpu_0_sel,
+ &s4_vpu_0_div,
+ &s4_vpu_0,
+ &s4_vpu_1_sel,
+ &s4_vpu_1_div,
+ &s4_vpu_1,
+ &s4_vpu,
+ &s4_vpu_clkb_tmp_mux,
+ &s4_vpu_clkb_tmp_div,
+ &s4_vpu_clkb_tmp,
+ &s4_vpu_clkb_div,
+ &s4_vpu_clkb,
+ &s4_vpu_clkc_p0_mux,
+ &s4_vpu_clkc_p0_div,
+ &s4_vpu_clkc_p0,
+ &s4_vpu_clkc_p1_mux,
+ &s4_vpu_clkc_p1_div,
+ &s4_vpu_clkc_p1,
+ &s4_vpu_clkc_mux,
+ &s4_vapb_0_sel,
+ &s4_vapb_0_div,
+ &s4_vapb_0,
+ &s4_vapb_1_sel,
+ &s4_vapb_1_div,
+ &s4_vapb_1,
+ &s4_vapb,
+ &s4_ge2d_gate,
+ &s4_hdcp22_esmclk_mux,
+ &s4_hdcp22_esmclk_div,
+ &s4_hdcp22_esmclk_gate,
+ &s4_hdcp22_skpclk_mux,
+ &s4_hdcp22_skpclk_div,
+ &s4_hdcp22_skpclk_gate,
+ &s4_vdin_meas_mux,
+ &s4_vdin_meas_div,
+ &s4_vdin_meas_gate,
+ &s4_sd_emmc_c_clk0_sel,
+ &s4_sd_emmc_c_clk0_div,
+ &s4_sd_emmc_c_clk0,
+ &s4_sd_emmc_a_clk0_sel,
+ &s4_sd_emmc_a_clk0_div,
+ &s4_sd_emmc_a_clk0,
+ &s4_sd_emmc_b_clk0_sel,
+ &s4_sd_emmc_b_clk0_div,
+ &s4_sd_emmc_b_clk0,
+ &s4_spicc0_mux,
+ &s4_spicc0_div,
+ &s4_spicc0_gate,
+ &s4_pwm_a_mux,
+ &s4_pwm_a_div,
+ &s4_pwm_a_gate,
+ &s4_pwm_b_mux,
+ &s4_pwm_b_div,
+ &s4_pwm_b_gate,
+ &s4_pwm_c_mux,
+ &s4_pwm_c_div,
+ &s4_pwm_c_gate,
+ &s4_pwm_d_mux,
+ &s4_pwm_d_div,
+ &s4_pwm_d_gate,
+ &s4_pwm_e_mux,
+ &s4_pwm_e_div,
+ &s4_pwm_e_gate,
+ &s4_pwm_f_mux,
+ &s4_pwm_f_div,
+ &s4_pwm_f_gate,
+ &s4_pwm_g_mux,
+ &s4_pwm_g_div,
+ &s4_pwm_g_gate,
+ &s4_pwm_h_mux,
+ &s4_pwm_h_div,
+ &s4_pwm_h_gate,
+ &s4_pwm_i_mux,
+ &s4_pwm_i_div,
+ &s4_pwm_i_gate,
+ &s4_pwm_j_mux,
+ &s4_pwm_j_div,
+ &s4_pwm_j_gate,
+ &s4_saradc_mux,
+ &s4_saradc_div,
+ &s4_saradc_gate,
+ &s4_gen_clk_sel,
+ &s4_gen_clk_div,
+ &s4_gen_clk,
+ &s4_ddr,
+ &s4_dos,
+ &s4_ethphy,
+ &s4_mali,
+ &s4_aocpu,
+ &s4_aucpu,
+ &s4_cec,
+ &s4_sdemmca,
+ &s4_sdemmcb,
+ &s4_nand,
+ &s4_smartcard,
+ &s4_acodec,
+ &s4_spifc,
+ &s4_msr_clk,
+ &s4_ir_ctrl,
+ &s4_audio,
+ &s4_eth,
+ &s4_uart_a,
+ &s4_uart_b,
+ &s4_uart_c,
+ &s4_uart_d,
+ &s4_uart_e,
+ &s4_aififo,
+ &s4_ts_ddr,
+ &s4_ts_pll,
+ &s4_g2d,
+ &s4_spicc0,
+ &s4_usb,
+ &s4_i2c_m_a,
+ &s4_i2c_m_b,
+ &s4_i2c_m_c,
+ &s4_i2c_m_d,
+ &s4_i2c_m_e,
+ &s4_hdmitx_apb,
+ &s4_i2c_s_a,
+ &s4_usb1_to_ddr,
+ &s4_hdcp22,
+ &s4_mmc_apb,
+ &s4_rsa,
+ &s4_cpu_debug,
+ &s4_vpu_intr,
+ &s4_demod,
+ &s4_sar_adc,
+ &s4_gic,
+ &s4_pwm_ab,
+ &s4_pwm_cd,
+ &s4_pwm_ef,
+ &s4_pwm_gh,
+ &s4_pwm_ij,
+ &s4_demod_core_clk_mux,
+ &s4_demod_core_clk_div,
+ &s4_demod_core_clk_gate,
+ &s4_adc_extclk_in_mux,
+ &s4_adc_extclk_in_div,
+ &s4_adc_extclk_in_gate,
+};
+
+static struct regmap_config clkc_regmap_config = {
+ .reg_bits = 32,
+ .val_bits = 32,
+ .reg_stride = 4,
+};
+
+static int meson_s4_periphs_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct regmap *regmap;
+ void __iomem *base;
+ int ret, i;
+
+ base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(base))
+ return PTR_ERR(base);
+
+ regmap = devm_regmap_init_mmio(dev, base, &clkc_regmap_config);
+ if (IS_ERR(regmap))
+ return PTR_ERR(regmap);
+
+ /* Populate regmap for the regmap backed clocks */
+ for (i = 0; i < ARRAY_SIZE(s4_periphs_clk_regmaps); i++)
+ s4_periphs_clk_regmaps[i]->map = regmap;
+
+ for (i = 0; i < s4_periphs_hw_onecell_data.num; i++) {
+ /* array might be sparse */
+ if (!s4_periphs_hw_onecell_data.hws[i])
+ continue;
+
+ ret = devm_clk_hw_register(dev, s4_periphs_hw_onecell_data.hws[i]);
+ if (ret) {
+ dev_err(dev, "Clock registration failed\n");
+ return ret;
+ }
+ }
+
+ return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get,
+ &s4_periphs_hw_onecell_data);
+}
+
+static const struct of_device_id clkc_match_table[] = {
+ {
+ .compatible = "amlogic,s4-peripherals-clkc",
+ },
+ {}
+};
+
+static struct platform_driver s4_driver = {
+ .probe = meson_s4_periphs_probe,
+ .driver = {
+ .name = "s4-periphs-clkc",
+ .of_match_table = clkc_match_table,
+ },
+};
+
+module_platform_driver(s4_driver);
+MODULE_LICENSE("GPL");
diff --git a/drivers/clk/meson/s4-peripherals.h b/drivers/clk/meson/s4-peripherals.h
new file mode 100644
index 000000000000..13ef07bada83
--- /dev/null
+++ b/drivers/clk/meson/s4-peripherals.h
@@ -0,0 +1,218 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+/*
+ * Copyright (c) 2021 Amlogic, inc.
+ * Author: Yu Tu <[email protected]>
+ */
+
+#ifndef __MESON_S4_PERIPHERALS_H__
+#define __MESON_S4_PERIPHERALS_H__
+
+/*
+ * Clock controller register offsets
+ * REG_BASE: REGISTER_BASE_ADDR = 0xfe000000
+ */
+#define CLKCTRL_OSCIN_CTRL 0x004
+#define CLKCTRL_RTC_BY_OSCIN_CTRL0 0x008
+#define CLKCTRL_RTC_BY_OSCIN_CTRL1 0x00c
+#define CLKCTRL_RTC_CTRL 0x010
+#define CLKCTRL_CHECK_CLK_RESULT 0x014
+#define CLKCTRL_MBIST_ATSPEED_CTRL 0x018
+#define CLKCTRL_LOCK_BIT_REG0 0x020
+#define CLKCTRL_LOCK_BIT_REG1 0x024
+#define CLKCTRL_LOCK_BIT_REG2 0x028
+#define CLKCTRL_LOCK_BIT_REG3 0x02c
+#define CLKCTRL_PROT_BIT_REG0 0x030
+#define CLKCTRL_PROT_BIT_REG1 0x034
+#define CLKCTRL_PROT_BIT_REG2 0x038
+#define CLKCTRL_PROT_BIT_REG3 0x03c
+#define CLKCTRL_SYS_CLK_CTRL0 0x040
+#define CLKCTRL_SYS_CLK_EN0_REG0 0x044
+#define CLKCTRL_SYS_CLK_EN0_REG1 0x048
+#define CLKCTRL_SYS_CLK_EN0_REG2 0x04c
+#define CLKCTRL_SYS_CLK_EN0_REG3 0x050
+#define CLKCTRL_SYS_CLK_EN1_REG0 0x054
+#define CLKCTRL_SYS_CLK_EN1_REG1 0x058
+#define CLKCTRL_SYS_CLK_EN1_REG2 0x05c
+#define CLKCTRL_SYS_CLK_EN1_REG3 0x060
+#define CLKCTRL_SYS_CLK_VPU_EN0 0x064
+#define CLKCTRL_SYS_CLK_VPU_EN1 0x068
+#define CLKCTRL_AXI_CLK_CTRL0 0x06c
+#define CLKCTRL_TST_CTRL0 0x080
+#define CLKCTRL_TST_CTRL1 0x084
+#define CLKCTRL_CECA_CTRL0 0x088
+#define CLKCTRL_CECA_CTRL1 0x08c
+#define CLKCTRL_CECB_CTRL0 0x090
+#define CLKCTRL_CECB_CTRL1 0x094
+#define CLKCTRL_SC_CLK_CTRL 0x098
+#define CLKCTRL_RAMA_CLK_CTRL0 0x0a4
+#define CLKCTRL_CLK12_24_CTRL 0x0a8
+#define CLKCTRL_VID_CLK_CTRL 0x0c0
+#define CLKCTRL_VID_CLK_CTRL2 0x0c4
+#define CLKCTRL_VID_CLK_DIV 0x0c8
+#define CLKCTRL_VIID_CLK_DIV 0x0cc
+#define CLKCTRL_VIID_CLK_CTRL 0x0d0
+#define CLKCTRL_HDMI_CLK_CTRL 0x0e0
+#define CLKCTRL_VID_PLL_CLK_DIV 0x0e4
+#define CLKCTRL_VPU_CLK_CTRL 0x0e8
+#define CLKCTRL_VPU_CLKB_CTRL 0x0ec
+#define CLKCTRL_VPU_CLKC_CTRL 0x0f0
+#define CLKCTRL_VID_LOCK_CLK_CTRL 0x0f4
+#define CLKCTRL_VDIN_MEAS_CLK_CTRL 0x0f8
+#define CLKCTRL_VAPBCLK_CTRL 0x0fc
+#define CLKCTRL_HDCP22_CTRL 0x100
+#define CLKCTRL_CDAC_CLK_CTRL 0x108
+#define CLKCTRL_VDEC_CLK_CTRL 0x140
+#define CLKCTRL_VDEC2_CLK_CTRL 0x144
+#define CLKCTRL_VDEC3_CLK_CTRL 0x148
+#define CLKCTRL_VDEC4_CLK_CTRL 0x14c
+#define CLKCTRL_TS_CLK_CTRL 0x158
+#define CLKCTRL_MALI_CLK_CTRL 0x15c
+#define CLKCTRL_ETH_CLK_CTRL 0x164
+#define CLKCTRL_NAND_CLK_CTRL 0x168
+#define CLKCTRL_SD_EMMC_CLK_CTRL 0x16c
+#define CLKCTRL_SPICC_CLK_CTRL 0x174
+#define CLKCTRL_GEN_CLK_CTRL 0x178
+#define CLKCTRL_SAR_CLK_CTRL 0x17c
+#define CLKCTRL_PWM_CLK_AB_CTRL 0x180
+#define CLKCTRL_PWM_CLK_CD_CTRL 0x184
+#define CLKCTRL_PWM_CLK_EF_CTRL 0x188
+#define CLKCTRL_PWM_CLK_GH_CTRL 0x18c
+#define CLKCTRL_PWM_CLK_IJ_CTRL 0x190
+#define CLKCTRL_DEMOD_CLK_CTRL 0x200
+#define CLKCTRL_TIMESTAMP_CTRL 0x400
+#define CLKCTRL_TIMESTAMP_CTRL1 0x404
+#define CLKCTRL_TIMESTAMP_CTRL2 0x40c
+#define CLKCTRL_TIMESTAMP_RD0 0x410
+#define CLKCTRL_TIMESTAMP_RD1 0x414
+#define CLKCTRL_TIMEBASE_CTRL0 0x418
+#define CLKCTRL_TIMEBASE_CTRL1 0x41c
+#define CLKCTRL_EFUSE_CPU_CFG01 0x480
+#define CLKCTRL_EFUSE_CPU_CFG2 0x484
+#define CLKCTRL_EFUSE_ENCP_CFG0 0x488
+#define CLKCTRL_EFUSE_MALI_CFG01 0x48c
+#define CLKCTRL_EFUSE_LOCK 0x498
+
+/*
+ * CLKID index values
+ *
+ * These indices are entirely contrived and do not map onto the hardware.
+ * It has now been decided to expose everything by default in the DT header:
+ * include/dt-bindings/clock/axg-clkc.h. Only the clocks ids we don't want
+ * to expose, such as the internal muxes and dividers of composite clocks,
+ * will remain defined here.
+ */
+#define CLKID_RTC_32K_CLKIN 0
+#define CLKID_RTC_32K_DIV 1
+#define CLKID_RTC_32K_SEL 2
+#define CLKID_RTC_32K_XATL 3
+#define CLKID_SYS_CLK_B_SEL 5
+#define CLKID_SYS_CLK_B_DIV 6
+#define CLKID_SYS_CLK_A_SEL 8
+#define CLKID_SYS_CLK_A_DIV 9
+#define CLKID_CECA_32K_CLKIN 12
+#define CLKID_CECA_32K_DIV 13
+#define CLKID_CECA_32K_SEL_PRE 14
+#define CLKID_CECA_32K_SEL 15
+#define CLKID_CECB_32K_CLKIN 17
+#define CLKID_CECB_32K_DIV 18
+#define CLKID_CECB_32K_SEL_PRE 19
+#define CLKID_CECB_32K_SEL 20
+#define CLKID_SC_CLK_SEL 22
+#define CLKID_SC_CLK_DIV 23
+#define CLKID_12_24M_CLK_GATE 25
+#define CLKID_12M_CLK_DIV 26
+#define CLKID_VID_PLL_DIV 28
+#define CLKID_VID_PLL_SEL 29
+#define CLKID_VCLK_SEL 31
+#define CLKID_VCLK2_SEL 32
+#define CLKID_VCLK_INPUT 33
+#define CLKID_VCLK2_INPUT 34
+#define CLKID_VCLK_DIV 35
+#define CLKID_VCLK2_DIV 36
+#define CLKID_VCLK_DIV2_EN 40
+#define CLKID_VCLK_DIV4_EN 41
+#define CLKID_VCLK_DIV6_EN 42
+#define CLKID_VCLK_DIV12_EN 43
+#define CLKID_VCLK2_DIV2_EN 45
+#define CLKID_VCLK2_DIV4_EN 46
+#define CLKID_VCLK2_DIV6_EN 47
+#define CLKID_VCLK2_DIV12_EN 48
+#define CLKID_CTS_ENCI_SEL 57
+#define CLKID_CTS_ENCP_SEL 58
+#define CLKID_CTS_VDAC_SEL 59
+#define CLKID_HDMI_TX_SEL 60
+#define CLKID_HDMI_TX 64
+#define CLKID_HDMI_SEL 65
+#define CLKID_HDMI_DIV 66
+#define CLKID_TS_CLK_DIV 68
+#define CLKID_MALI_0_SEL 70
+#define CLKID_MALI_0_DIV 71
+#define CLKID_MALI_1_SEL 73
+#define CLKID_MALI_1_DIV 74
+#define CLKID_VDEC_P0_SEL 77
+#define CLKID_VDEC_P0_DIV 78
+#define CLKID_VDEC_P1_SEL 80
+#define CLKID_VDEC_P1_DIV 81
+#define CLKID_HEVCF_P0_SEL 84
+#define CLKID_HEVCF_P0_DIV 85
+#define CLKID_HEVCF_P1_SEL 87
+#define CLKID_HEVCF_P1_DIV 88
+#define CLKID_VPU_0_SEL 91
+#define CLKID_VPU_0_DIV 92
+#define CLKID_VPU_1_SEL 94
+#define CLKID_VPU_1_DIV 95
+#define CLKID_VPU_CLKB_TMP_SEL 98
+#define CLKID_VPU_CLKB_TMP_DIV 99
+#define CLKID_VPU_CLKB_DIV 101
+#define CLKID_VPU_CLKC_P0_SEL 103
+#define CLKID_VPU_CLKC_P0_DIV 104
+#define CLKID_VPU_CLKC_P1_SEL 106
+#define CLKID_VPU_CLKC_P1_DIV 107
+#define CLKID_VAPB_0_SEL 110
+#define CLKID_VAPB_0_DIV 111
+#define CLKID_VAPB_1_SEL 113
+#define CLKID_VAPB_1_DIV 114
+#define CLKID_VDIN_MEAS_SEL 118
+#define CLKID_VDIN_MEAS_DIV 119
+#define CLKID_SD_EMMC_C_CLK_SEL 121
+#define CLKID_SD_EMMC_C_CLK_DIV 122
+#define CLKID_SD_EMMC_A_CLK_SEL 124
+#define CLKID_SD_EMMC_A_CLK_DIV 125
+#define CLKID_SD_EMMC_B_CLK_SEL 127
+#define CLKID_SD_EMMC_B_CLK_DIV 128
+#define CLKID_SPICC0_SEL 130
+#define CLKID_SPICC0_DIV 131
+#define CLKID_PWM_A_SEL 133
+#define CLKID_PWM_A_DIV 134
+#define CLKID_PWM_B_SEL 136
+#define CLKID_PWM_B_DIV 137
+#define CLKID_PWM_C_SEL 139
+#define CLKID_PWM_C_DIV 140
+#define CLKID_PWM_D_SEL 142
+#define CLKID_PWM_D_DIV 143
+#define CLKID_PWM_E_SEL 145
+#define CLKID_PWM_E_DIV 146
+#define CLKID_PWM_F_SEL 148
+#define CLKID_PWM_F_DIV 149
+#define CLKID_PWM_G_SEL 151
+#define CLKID_PWM_G_DIV 152
+#define CLKID_PWM_H_SEL 154
+#define CLKID_PWM_H_DIV 155
+#define CLKID_PWM_I_SEL 157
+#define CLKID_PWM_I_DIV 158
+#define CLKID_PWM_J_SEL 160
+#define CLKID_PWM_J_DIV 161
+#define CLKID_SARADC_SEL 163
+#define CLKID_SARADC_DIV 164
+#define CLKID_GEN_SEL 166
+#define CLKID_GEN_DIV 167
+#define CLKID_HDCP22_ESMCLK_SEL 219
+#define CLKID_HDCP22_ESMCLK_DIV 220
+#define CLKID_HDCP22_SKPCLK_SEL 222
+#define CLKID_HDCP22_SKPCLK_DIV 223
+
+#define NR_CLKS 225
+/* include the CLKIDs that have been made part of the DT binding */
+#include <dt-bindings/clock/amlogic,s4-peripherals-clkc.h>
+
+#endif /* __MESON_S4_PERIPHERALS_H__ */
--
2.33.1
On Mon 16 Jan 2023 at 15:42, Yu Tu <[email protected]> wrote:
> Add the peripherals clock controller driver in the s4 SoC family.
>
> Signed-off-by: Yu Tu <[email protected]>
[...]
> +
> +/* Video Clocks */
> +static struct clk_regmap s4_vid_pll_div = {
> + .data = &(struct meson_vid_pll_div_data){
> + .val = {
> + .reg_off = CLKCTRL_VID_PLL_CLK_DIV,
> + .shift = 0,
> + .width = 15,
> + },
> + .sel = {
> + .reg_off = CLKCTRL_VID_PLL_CLK_DIV,
> + .shift = 16,
> + .width = 2,
> + },
> + },
> + .hw.init = &(struct clk_init_data) {
> + .name = "vid_pll_div",
> + /*
> + * The frequency division from the hdmi_pll clock to the vid_pll_div
> + * clock is the default value of this register. When designing the
> + * video module of the chip, a default value that can meet the
> + * requirements of the video module will be solidified according
> + * to the usage requirements of the chip, so as to facilitate chip
> + * simulation. So this is ro_ops.
> + * It is important to note that this clock is not used on this
> + * chip and is described only for the integrity of the clock tree.
> + */
If it is reset value and will be applicable to all the design, regarless
of the use-case, then yes RO ops is OK
From what I understand here, the value will depend on the use-case requirements.
This is a typical case where the DT prop "assigned-rate" should be used, not RO ops.
> + .ops = &meson_vid_pll_div_ro_ops,
> + .parent_data = (const struct clk_parent_data []) {
> + { .fw_name = "hdmi_pll", }
> + },
> + .num_parents = 1,
> + .flags = CLK_SET_RATE_PARENT,
> + },
> +};
> +
> +
> +/* VDEC clocks */
> +static const struct clk_parent_data s4_dec_parent_data[] = {
> + { .fw_name = "fclk_div2p5", },
> + { .fw_name = "fclk_div3", },
> + { .fw_name = "fclk_div4", },
> + { .fw_name = "fclk_div5", },
> + { .fw_name = "fclk_div7", },
> + { .fw_name = "hifi_pll", },
> + { .fw_name = "gp0_pll", },
> + { .fw_name = "xtal", }
> +};
> +
> +static struct clk_regmap s4_vdec_p0_mux = {
> + .data = &(struct clk_regmap_mux_data){
> + .offset = CLKCTRL_VDEC_CLK_CTRL,
> + .mask = 0x7,
> + .shift = 9,
> + .flags = CLK_MUX_ROUND_CLOSEST,
> + },
> + .hw.init = &(struct clk_init_data) {
> + .name = "vdec_p0_mux",
> + .ops = &clk_regmap_mux_ops,
> + .parent_data = s4_dec_parent_data,
> + .num_parents = ARRAY_SIZE(s4_dec_parent_data),
> + /*
> + * When the driver uses this clock, needs to specify the patent clock
> + * he wants in the dts.
s/patent/parent ?
s/he wants/it requires ?
> + */
> + .flags = CLK_SET_RATE_NO_REPARENT | CLK_SET_RATE_PARENT,
> + },
> +};
> +
[...]
> +static const struct clk_parent_data s4_vpu_clkc_parent_data[] = {
> + { .fw_name = "fclk_div4", },
> + { .fw_name = "fclk_div3", },
> + { .fw_name = "fclk_div5", },
> + { .fw_name = "fclk_div7", },
> + { .fw_name = "mpll1", },
> + { .hw = &s4_vid_pll.hw },
> + { .fw_name = "mpll2", },
> + { .fw_name = "gp0_pll", },
> +};
> +
> +static struct clk_regmap s4_vpu_clkc_p0_mux = {
> + .data = &(struct clk_regmap_mux_data){
> + .offset = CLKCTRL_VPU_CLKC_CTRL,
> + .mask = 0x7,
> + .shift = 9,
> + },
> + .hw.init = &(struct clk_init_data) {
> + .name = "vpu_clkc_p0_mux",
> + .ops = &clk_regmap_mux_ops,
> + .parent_data = s4_vpu_clkc_parent_data,
> + .num_parents = ARRAY_SIZE(s4_vpu_clkc_parent_data),
> + /*
> + * When the driver uses this clock, needs to specify the patent clock
> + * he wants in the dts.
> + */
That's quite a lot of occurences of the same comment.
At the same time, other clocks with the same flag have no comment.
Please make general comment, before the Video/VPU section, explaining
which clocks needs on a use-case basis (through DT) and possibly how it
should be set, what should drive the choices.
> + .flags = CLK_SET_RATE_NO_REPARENT | CLK_SET_RATE_PARENT,
> + },
> +};
> +
> +
> +/* EMMC/NAND clock */
> +static const struct clk_parent_data s4_sd_emmc_clk0_parent_data[] = {
> + { .fw_name = "xtal", },
> + { .fw_name = "fclk_div2", },
> + { .fw_name = "fclk_div3", },
> + { .fw_name = "hifi_pll", },
> + { .fw_name = "fclk_div2p5", },
> + { .fw_name = "mpll2", },
> + { .fw_name = "mpll3", },
> + { .fw_name = "gp0_pll", },
> +};
> +
> +static struct clk_regmap s4_sd_emmc_c_clk0_sel = {
> + .data = &(struct clk_regmap_mux_data){
> + .offset = CLKCTRL_NAND_CLK_CTRL,
> + .mask = 0x7,
> + .shift = 9,
> + },
> + .hw.init = &(struct clk_init_data) {
> + .name = "sd_emmc_c_clk0_sel",
> + .ops = &clk_regmap_mux_ops,
> + .parent_data = s4_sd_emmc_clk0_parent_data,
> + .num_parents = ARRAY_SIZE(s4_sd_emmc_clk0_parent_data),
> + /*
> + * When the driver uses this clock, needs to specify the patent clock
> + * he wants in the dts.
> + */
I'm getting a bit suspicious about the use (and abuse ...) of this flag.
I don't quite get how selecting the base PLL for MMC should be done on
use-case basis and should be up the board DT ...
Other SoC have all used fdiv2 so far. Do you expect this setting to be
part of the dtsi SoC file ?
> + .flags = CLK_SET_RATE_NO_REPARENT | CLK_SET_RATE_PARENT,
> + },
> +};
> +
> +
> +/* SPICC Clock */
> +static const struct clk_parent_data s4_spicc_parent_data[] = {
> + { .fw_name = "xtal", },
> + { .hw = &s4_sys_clk.hw },
> + { .fw_name = "fclk_div4", },
> + { .fw_name = "fclk_div3", },
> + { .fw_name = "fclk_div2", },
> + { .fw_name = "fclk_div5", },
> + { .fw_name = "fclk_div7", },
> +};
> +
> +static struct clk_regmap s4_spicc0_mux = {
> + .data = &(struct clk_regmap_mux_data){
> + .offset = CLKCTRL_SPICC_CLK_CTRL,
> + .mask = 0x7,
> + .shift = 7,
> + },
> + .hw.init = &(struct clk_init_data) {
> + .name = "spicc0_mux",
> + .ops = &clk_regmap_mux_ops,
> + .parent_data = s4_spicc_parent_data,
> + .num_parents = ARRAY_SIZE(s4_spicc_parent_data),
> + /*
> + * When the driver uses this clock, needs to specify the patent clock
> + * he wants in the dts.
> + */
This is getting too far. All the parent clocks are fixed.
Let CCF do the job of picking the most adequate clock for the job
instead of manually settings things
> + .flags = CLK_SET_RATE_NO_REPARENT | CLK_SET_RATE_PARENT,
> + },
> +};
> +
> +
> +/* PWM Clock */
> +static const struct clk_parent_data s4_pwm_parent_data[] = {
> + { .fw_name = "xtal", },
> + { .hw = &s4_vid_pll.hw },
> + { .fw_name = "fclk_div4", },
> + { .fw_name = "fclk_div3", },
> +};
> +
> +static struct clk_regmap s4_pwm_a_mux = {
> + .data = &(struct clk_regmap_mux_data) {
> + .offset = CLKCTRL_PWM_CLK_AB_CTRL,
> + .mask = 0x3,
> + .shift = 9,
> + },
> + .hw.init = &(struct clk_init_data){
> + .name = "pwm_a_mux",
> + .ops = &clk_regmap_mux_ops,
> + .parent_data = s4_pwm_parent_data,
> + .num_parents = ARRAY_SIZE(s4_pwm_parent_data),
> + /*
> + * When the driver uses this clock, needs to specify the patent clock
> + * he wants in the dts.
> + */
Same here ... this is really going to far.
> + .flags = CLK_SET_RATE_NO_REPARENT | CLK_SET_RATE_PARENT,
> + },
> +};
> +
> +
> +static struct clk_regmap s4_saradc_mux = {
> + .data = &(struct clk_regmap_mux_data) {
> + .offset = CLKCTRL_SAR_CLK_CTRL,
> + .mask = 0x3,
> + .shift = 9,
> + },
> + .hw.init = &(struct clk_init_data){
> + .name = "saradc_mux",
> + .ops = &clk_regmap_mux_ops,
> + .parent_data = (const struct clk_parent_data []) {
> + { .fw_name = "xtal", },
> + { .hw = &s4_sys_clk.hw },
> + },
> + .num_parents = 2,
> + /*
> + * When the driver uses this clock, needs to specify the patent clock
> + * he wants in the dts.
> + */
For each clock type, if this flag is going to be used, I'd like a clear
explanation about why it is use-case dependent and why you need manual
control over this. Same applies to all the occurence.
> + .flags = CLK_SET_RATE_NO_REPARENT | CLK_SET_RATE_PARENT,
> + },
> +};
Hi
On 2023/1/19 19:37, Jerome Brunet wrote:
> [ EXTERNAL EMAIL ]
>
>
> On Mon 16 Jan 2023 at 15:42, Yu Tu <[email protected]> wrote:
>
>> Add the peripherals clock controller driver in the s4 SoC family.
>>
>> Signed-off-by: Yu Tu <[email protected]>
>
> [...]
>
>> +
>> +/* Video Clocks */
>> +static struct clk_regmap s4_vid_pll_div = {
>> + .data = &(struct meson_vid_pll_div_data){
>> + .val = {
>> + .reg_off = CLKCTRL_VID_PLL_CLK_DIV,
>> + .shift = 0,
>> + .width = 15,
>> + },
>> + .sel = {
>> + .reg_off = CLKCTRL_VID_PLL_CLK_DIV,
>> + .shift = 16,
>> + .width = 2,
>> + },
>> + },
>> + .hw.init = &(struct clk_init_data) {
>> + .name = "vid_pll_div",
>> + /*
>> + * The frequency division from the hdmi_pll clock to the vid_pll_div
>> + * clock is the default value of this register. When designing the
>> + * video module of the chip, a default value that can meet the
>> + * requirements of the video module will be solidified according
>> + * to the usage requirements of the chip, so as to facilitate chip
>> + * simulation. So this is ro_ops.
>> + * It is important to note that this clock is not used on this
>> + * chip and is described only for the integrity of the clock tree.
>> + */
>
> If it is reset value and will be applicable to all the design, regarless
> of the use-case, then yes RO ops is OK
>
>>From what I understand here, the value will depend on the use-case requirements.
> This is a typical case where the DT prop "assigned-rate" should be used, not RO ops.
Check the previous chip history, the actual scene is not used at all,
basically is used in simulation. So the previous SOC was "ro_ops"
without any problems. This S4 SOC is not actually useful either.
So when you were upstream, you had no problem making "ro_ops". I wonder
if I could delete this useless clock, so you don't have to worry about it.
>
>> + .ops = &meson_vid_pll_div_ro_ops,
>> + .parent_data = (const struct clk_parent_data []) {
>> + { .fw_name = "hdmi_pll", }
>> + },
>> + .num_parents = 1,
>> + .flags = CLK_SET_RATE_PARENT,
>> + },
>> +};
>> +
>
>> +
>> +/* VDEC clocks */
>> +static const struct clk_parent_data s4_dec_parent_data[] = {
>> + { .fw_name = "fclk_div2p5", },
>> + { .fw_name = "fclk_div3", },
>> + { .fw_name = "fclk_div4", },
>> + { .fw_name = "fclk_div5", },
>> + { .fw_name = "fclk_div7", },
>> + { .fw_name = "hifi_pll", },
>> + { .fw_name = "gp0_pll", },
>> + { .fw_name = "xtal", }
>> +};
>> +
>> +static struct clk_regmap s4_vdec_p0_mux = {
>> + .data = &(struct clk_regmap_mux_data){
>> + .offset = CLKCTRL_VDEC_CLK_CTRL,
>> + .mask = 0x7,
>> + .shift = 9,
>> + .flags = CLK_MUX_ROUND_CLOSEST,
>> + },
>> + .hw.init = &(struct clk_init_data) {
>> + .name = "vdec_p0_mux",
>> + .ops = &clk_regmap_mux_ops,
>> + .parent_data = s4_dec_parent_data,
>> + .num_parents = ARRAY_SIZE(s4_dec_parent_data),
>> + /*
>> + * When the driver uses this clock, needs to specify the patent clock
>> + * he wants in the dts.
>
> s/patent/parent ?
> s/he wants/it requires ?
Okay.
>
>> + */
>> + .flags = CLK_SET_RATE_NO_REPARENT | CLK_SET_RATE_PARENT,
>> + },
>> +};
>> +
>
> [...]
>
>> +static const struct clk_parent_data s4_vpu_clkc_parent_data[] = {
>> + { .fw_name = "fclk_div4", },
>> + { .fw_name = "fclk_div3", },
>> + { .fw_name = "fclk_div5", },
>> + { .fw_name = "fclk_div7", },
>> + { .fw_name = "mpll1", },
>> + { .hw = &s4_vid_pll.hw },
>> + { .fw_name = "mpll2", },
>> + { .fw_name = "gp0_pll", },
>> +};
>> +
>> +static struct clk_regmap s4_vpu_clkc_p0_mux = {
>> + .data = &(struct clk_regmap_mux_data){
>> + .offset = CLKCTRL_VPU_CLKC_CTRL,
>> + .mask = 0x7,
>> + .shift = 9,
>> + },
>> + .hw.init = &(struct clk_init_data) {
>> + .name = "vpu_clkc_p0_mux",
>> + .ops = &clk_regmap_mux_ops,
>> + .parent_data = s4_vpu_clkc_parent_data,
>> + .num_parents = ARRAY_SIZE(s4_vpu_clkc_parent_data),
>> + /*
>> + * When the driver uses this clock, needs to specify the patent clock
>> + * he wants in the dts.
>> + */
>
> That's quite a lot of occurences of the same comment.
> At the same time, other clocks with the same flag have no comment.
>
> Please make general comment, before the Video/VPU section, explaining
> which clocks needs on a use-case basis (through DT) and possibly how it
> should be set, what should drive the choices.
>
The owner of the corresponding driver module wants to have a fixed
clock, but I can't explain every specific reason. So I'm going to change
it all to.flags = CLK_SET_RATE_PARENT in the next version. Let CCF
choose the appropriate clock as you suggested. If there is a
corresponding module you want to change, ask him to give you a specific
explanation. Do you think that's all right?
I will not reply to you below.
>> + .flags = CLK_SET_RATE_NO_REPARENT | CLK_SET_RATE_PARENT,
>> + },
>> +};
>> +
>
>> +
>> +/* EMMC/NAND clock */
>> +static const struct clk_parent_data s4_sd_emmc_clk0_parent_data[] = {
>> + { .fw_name = "xtal", },
>> + { .fw_name = "fclk_div2", },
>> + { .fw_name = "fclk_div3", },
>> + { .fw_name = "hifi_pll", },
>> + { .fw_name = "fclk_div2p5", },
>> + { .fw_name = "mpll2", },
>> + { .fw_name = "mpll3", },
>> + { .fw_name = "gp0_pll", },
>> +};
>> +
>> +static struct clk_regmap s4_sd_emmc_c_clk0_sel = {
>> + .data = &(struct clk_regmap_mux_data){
>> + .offset = CLKCTRL_NAND_CLK_CTRL,
>> + .mask = 0x7,
>> + .shift = 9,
>> + },
>> + .hw.init = &(struct clk_init_data) {
>> + .name = "sd_emmc_c_clk0_sel",
>> + .ops = &clk_regmap_mux_ops,
>> + .parent_data = s4_sd_emmc_clk0_parent_data,
>> + .num_parents = ARRAY_SIZE(s4_sd_emmc_clk0_parent_data),
>> + /*
>> + * When the driver uses this clock, needs to specify the patent clock
>> + * he wants in the dts.
>> + */
>
> I'm getting a bit suspicious about the use (and abuse ...) of this flag.
> I don't quite get how selecting the base PLL for MMC should be done on
> use-case basis and should be up the board DT ...
>
> Other SoC have all used fdiv2 so far. Do you expect this setting to be
> part of the dtsi SoC file ?
>
>> + .flags = CLK_SET_RATE_NO_REPARENT | CLK_SET_RATE_PARENT,
>> + },
>> +};
>> +
>
>> +
>> +/* SPICC Clock */
>> +static const struct clk_parent_data s4_spicc_parent_data[] = {
>> + { .fw_name = "xtal", },
>> + { .hw = &s4_sys_clk.hw },
>> + { .fw_name = "fclk_div4", },
>> + { .fw_name = "fclk_div3", },
>> + { .fw_name = "fclk_div2", },
>> + { .fw_name = "fclk_div5", },
>> + { .fw_name = "fclk_div7", },
>> +};
>> +
>> +static struct clk_regmap s4_spicc0_mux = {
>> + .data = &(struct clk_regmap_mux_data){
>> + .offset = CLKCTRL_SPICC_CLK_CTRL,
>> + .mask = 0x7,
>> + .shift = 7,
>> + },
>> + .hw.init = &(struct clk_init_data) {
>> + .name = "spicc0_mux",
>> + .ops = &clk_regmap_mux_ops,
>> + .parent_data = s4_spicc_parent_data,
>> + .num_parents = ARRAY_SIZE(s4_spicc_parent_data),
>> + /*
>> + * When the driver uses this clock, needs to specify the patent clock
>> + * he wants in the dts.
>> + */
>
> This is getting too far. All the parent clocks are fixed.
> Let CCF do the job of picking the most adequate clock for the job
> instead of manually settings things
>
>> + .flags = CLK_SET_RATE_NO_REPARENT | CLK_SET_RATE_PARENT,
>> + },
>> +};
>> +
>
>
>> +
>> +/* PWM Clock */
>> +static const struct clk_parent_data s4_pwm_parent_data[] = {
>> + { .fw_name = "xtal", },
>> + { .hw = &s4_vid_pll.hw },
>> + { .fw_name = "fclk_div4", },
>> + { .fw_name = "fclk_div3", },
>> +};
>> +
>> +static struct clk_regmap s4_pwm_a_mux = {
>> + .data = &(struct clk_regmap_mux_data) {
>> + .offset = CLKCTRL_PWM_CLK_AB_CTRL,
>> + .mask = 0x3,
>> + .shift = 9,
>> + },
>> + .hw.init = &(struct clk_init_data){
>> + .name = "pwm_a_mux",
>> + .ops = &clk_regmap_mux_ops,
>> + .parent_data = s4_pwm_parent_data,
>> + .num_parents = ARRAY_SIZE(s4_pwm_parent_data),
>> + /*
>> + * When the driver uses this clock, needs to specify the patent clock
>> + * he wants in the dts.
>> + */
>
> Same here ... this is really going to far.
>
>> + .flags = CLK_SET_RATE_NO_REPARENT | CLK_SET_RATE_PARENT,
>> + },
>> +};
>> +
>
>> +
>> +static struct clk_regmap s4_saradc_mux = {
>> + .data = &(struct clk_regmap_mux_data) {
>> + .offset = CLKCTRL_SAR_CLK_CTRL,
>> + .mask = 0x3,
>> + .shift = 9,
>> + },
>> + .hw.init = &(struct clk_init_data){
>> + .name = "saradc_mux",
>> + .ops = &clk_regmap_mux_ops,
>> + .parent_data = (const struct clk_parent_data []) {
>> + { .fw_name = "xtal", },
>> + { .hw = &s4_sys_clk.hw },
>> + },
>> + .num_parents = 2,
>> + /*
>> + * When the driver uses this clock, needs to specify the patent clock
>> + * he wants in the dts.
>> + */
>
> For each clock type, if this flag is going to be used, I'd like a clear
> explanation about why it is use-case dependent and why you need manual
> control over this. Same applies to all the occurence.
>
>> + .flags = CLK_SET_RATE_NO_REPARENT | CLK_SET_RATE_PARENT,
>> + },
>> +};
>
On Fri 20 Jan 2023 at 11:33, Yu Tu <[email protected]> wrote:
> Hi
> On 2023/1/19 19:37, Jerome Brunet wrote:
>> [ EXTERNAL EMAIL ]
>> On Mon 16 Jan 2023 at 15:42, Yu Tu <[email protected]> wrote:
>>
>>> Add the peripherals clock controller driver in the s4 SoC family.
>>>
>>> Signed-off-by: Yu Tu <[email protected]>
>> [...]
>>
>>> +
>>> +/* Video Clocks */
>>> +static struct clk_regmap s4_vid_pll_div = {
>>> + .data = &(struct meson_vid_pll_div_data){
>>> + .val = {
>>> + .reg_off = CLKCTRL_VID_PLL_CLK_DIV,
>>> + .shift = 0,
>>> + .width = 15,
>>> + },
>>> + .sel = {
>>> + .reg_off = CLKCTRL_VID_PLL_CLK_DIV,
>>> + .shift = 16,
>>> + .width = 2,
>>> + },
>>> + },
>>> + .hw.init = &(struct clk_init_data) {
>>> + .name = "vid_pll_div",
>>> + /*
>>> + * The frequency division from the hdmi_pll clock to the vid_pll_div
>>> + * clock is the default value of this register. When designing the
>>> + * video module of the chip, a default value that can meet the
>>> + * requirements of the video module will be solidified according
>>> + * to the usage requirements of the chip, so as to facilitate chip
>>> + * simulation. So this is ro_ops.
>>> + * It is important to note that this clock is not used on this
>>> + * chip and is described only for the integrity of the clock tree.
>>> + */
>> If it is reset value and will be applicable to all the design, regarless
>> of the use-case, then yes RO ops is OK
>>
>>>From what I understand here, the value will depend on the use-case requirements.
>> This is a typical case where the DT prop "assigned-rate" should be used, not RO ops.
>
> Check the previous chip history, the actual scene is not used at all,
> basically is used in simulation. So the previous SOC was "ro_ops" without
> any problems. This S4 SOC is not actually useful either.
>
> So when you were upstream, you had no problem making "ro_ops". I wonder if
> I could delete this useless clock, so you don't have to worry about it.
I don't know what to make of this. What is the point of adding a useless
clock ?
>
>>
>>> + .ops = &meson_vid_pll_div_ro_ops,
>>> + .parent_data = (const struct clk_parent_data []) {
>>> + { .fw_name = "hdmi_pll", }
>>> + },
>>> + .num_parents = 1,
>>> + .flags = CLK_SET_RATE_PARENT,
>>> + },
>>> +};
>>> +
>>
>>> +
>>> +/* VDEC clocks */
>>> +static const struct clk_parent_data s4_dec_parent_data[] = {
>>> + { .fw_name = "fclk_div2p5", },
>>> + { .fw_name = "fclk_div3", },
>>> + { .fw_name = "fclk_div4", },
>>> + { .fw_name = "fclk_div5", },
>>> + { .fw_name = "fclk_div7", },
>>> + { .fw_name = "hifi_pll", },
>>> + { .fw_name = "gp0_pll", },
>>> + { .fw_name = "xtal", }
>>> +};
>>> +
>>> +static struct clk_regmap s4_vdec_p0_mux = {
>>> + .data = &(struct clk_regmap_mux_data){
>>> + .offset = CLKCTRL_VDEC_CLK_CTRL,
>>> + .mask = 0x7,
>>> + .shift = 9,
>>> + .flags = CLK_MUX_ROUND_CLOSEST,
>>> + },
>>> + .hw.init = &(struct clk_init_data) {
>>> + .name = "vdec_p0_mux",
>>> + .ops = &clk_regmap_mux_ops,
>>> + .parent_data = s4_dec_parent_data,
>>> + .num_parents = ARRAY_SIZE(s4_dec_parent_data),
>>> + /*
>>> + * When the driver uses this clock, needs to specify the patent clock
>>> + * he wants in the dts.
>> s/patent/parent ?
>> s/he wants/it requires ?
>
> Okay.
>
>>
>>> + */
>>> + .flags = CLK_SET_RATE_NO_REPARENT | CLK_SET_RATE_PARENT,
>>> + },
>>> +};
>>> +
>> [...]
>>
>>> +static const struct clk_parent_data s4_vpu_clkc_parent_data[] = {
>>> + { .fw_name = "fclk_div4", },
>>> + { .fw_name = "fclk_div3", },
>>> + { .fw_name = "fclk_div5", },
>>> + { .fw_name = "fclk_div7", },
>>> + { .fw_name = "mpll1", },
>>> + { .hw = &s4_vid_pll.hw },
>>> + { .fw_name = "mpll2", },
>>> + { .fw_name = "gp0_pll", },
>>> +};
>>> +
>>> +static struct clk_regmap s4_vpu_clkc_p0_mux = {
>>> + .data = &(struct clk_regmap_mux_data){
>>> + .offset = CLKCTRL_VPU_CLKC_CTRL,
>>> + .mask = 0x7,
>>> + .shift = 9,
>>> + },
>>> + .hw.init = &(struct clk_init_data) {
>>> + .name = "vpu_clkc_p0_mux",
>>> + .ops = &clk_regmap_mux_ops,
>>> + .parent_data = s4_vpu_clkc_parent_data,
>>> + .num_parents = ARRAY_SIZE(s4_vpu_clkc_parent_data),
>>> + /*
>>> + * When the driver uses this clock, needs to specify the patent clock
>>> + * he wants in the dts.
>>> + */
>> That's quite a lot of occurences of the same comment.
>> At the same time, other clocks with the same flag have no comment.
>> Please make general comment, before the Video/VPU section, explaining
>> which clocks needs on a use-case basis (through DT) and possibly how it
>> should be set, what should drive the choices.
>>
>
> The owner of the corresponding driver module wants to have a fixed clock,
> but I can't explain every specific reason.
Why can't you ?
> So I'm going to change it all
> to.flags = CLK_SET_RATE_PARENT in the next version. Let CCF choose the
> appropriate clock as you suggested. If there is a corresponding module you
> want to change, ask him to give you a specific explanation. Do you think
> that's all right?
If the flag is actually required and there is a reason, no it is not.
>
> I will not reply to you below.
Noted.
>
>>> + .flags = CLK_SET_RATE_NO_REPARENT | CLK_SET_RATE_PARENT,
>>> + },
>>> +};
>>> +
>>
>>> +
>>> +/* EMMC/NAND clock */
>>> +static const struct clk_parent_data s4_sd_emmc_clk0_parent_data[] = {
>>> + { .fw_name = "xtal", },
>>> + { .fw_name = "fclk_div2", },
>>> + { .fw_name = "fclk_div3", },
>>> + { .fw_name = "hifi_pll", },
>>> + { .fw_name = "fclk_div2p5", },
>>> + { .fw_name = "mpll2", },
>>> + { .fw_name = "mpll3", },
>>> + { .fw_name = "gp0_pll", },
>>> +};
>>> +
>>> +static struct clk_regmap s4_sd_emmc_c_clk0_sel = {
>>> + .data = &(struct clk_regmap_mux_data){
>>> + .offset = CLKCTRL_NAND_CLK_CTRL,
>>> + .mask = 0x7,
>>> + .shift = 9,
>>> + },
>>> + .hw.init = &(struct clk_init_data) {
>>> + .name = "sd_emmc_c_clk0_sel",
>>> + .ops = &clk_regmap_mux_ops,
>>> + .parent_data = s4_sd_emmc_clk0_parent_data,
>>> + .num_parents = ARRAY_SIZE(s4_sd_emmc_clk0_parent_data),
>>> + /*
>>> + * When the driver uses this clock, needs to specify the patent clock
>>> + * he wants in the dts.
>>> + */
>> I'm getting a bit suspicious about the use (and abuse ...) of this flag.
>> I don't quite get how selecting the base PLL for MMC should be done on
>> use-case basis and should be up the board DT ...
>> Other SoC have all used fdiv2 so far. Do you expect this setting to be
>> part of the dtsi SoC file ?
>>
>>> + .flags = CLK_SET_RATE_NO_REPARENT | CLK_SET_RATE_PARENT,
>>> + },
>>> +};
>>> +
>>
>>> +
>>> +/* SPICC Clock */
>>> +static const struct clk_parent_data s4_spicc_parent_data[] = {
>>> + { .fw_name = "xtal", },
>>> + { .hw = &s4_sys_clk.hw },
>>> + { .fw_name = "fclk_div4", },
>>> + { .fw_name = "fclk_div3", },
>>> + { .fw_name = "fclk_div2", },
>>> + { .fw_name = "fclk_div5", },
>>> + { .fw_name = "fclk_div7", },
>>> +};
>>> +
>>> +static struct clk_regmap s4_spicc0_mux = {
>>> + .data = &(struct clk_regmap_mux_data){
>>> + .offset = CLKCTRL_SPICC_CLK_CTRL,
>>> + .mask = 0x7,
>>> + .shift = 7,
>>> + },
>>> + .hw.init = &(struct clk_init_data) {
>>> + .name = "spicc0_mux",
>>> + .ops = &clk_regmap_mux_ops,
>>> + .parent_data = s4_spicc_parent_data,
>>> + .num_parents = ARRAY_SIZE(s4_spicc_parent_data),
>>> + /*
>>> + * When the driver uses this clock, needs to specify the patent clock
>>> + * he wants in the dts.
>>> + */
>> This is getting too far. All the parent clocks are fixed.
>> Let CCF do the job of picking the most adequate clock for the job
>> instead of manually settings things
>>
>>> + .flags = CLK_SET_RATE_NO_REPARENT | CLK_SET_RATE_PARENT,
>>> + },
>>> +};
>>> +
>>
>>> +
>>> +/* PWM Clock */
>>> +static const struct clk_parent_data s4_pwm_parent_data[] = {
>>> + { .fw_name = "xtal", },
>>> + { .hw = &s4_vid_pll.hw },
>>> + { .fw_name = "fclk_div4", },
>>> + { .fw_name = "fclk_div3", },
>>> +};
>>> +
>>> +static struct clk_regmap s4_pwm_a_mux = {
>>> + .data = &(struct clk_regmap_mux_data) {
>>> + .offset = CLKCTRL_PWM_CLK_AB_CTRL,
>>> + .mask = 0x3,
>>> + .shift = 9,
>>> + },
>>> + .hw.init = &(struct clk_init_data){
>>> + .name = "pwm_a_mux",
>>> + .ops = &clk_regmap_mux_ops,
>>> + .parent_data = s4_pwm_parent_data,
>>> + .num_parents = ARRAY_SIZE(s4_pwm_parent_data),
>>> + /*
>>> + * When the driver uses this clock, needs to specify the patent clock
>>> + * he wants in the dts.
>>> + */
>> Same here ... this is really going to far.
>>
>>> + .flags = CLK_SET_RATE_NO_REPARENT | CLK_SET_RATE_PARENT,
>>> + },
>>> +};
>>> +
>>
>>> +
>>> +static struct clk_regmap s4_saradc_mux = {
>>> + .data = &(struct clk_regmap_mux_data) {
>>> + .offset = CLKCTRL_SAR_CLK_CTRL,
>>> + .mask = 0x3,
>>> + .shift = 9,
>>> + },
>>> + .hw.init = &(struct clk_init_data){
>>> + .name = "saradc_mux",
>>> + .ops = &clk_regmap_mux_ops,
>>> + .parent_data = (const struct clk_parent_data []) {
>>> + { .fw_name = "xtal", },
>>> + { .hw = &s4_sys_clk.hw },
>>> + },
>>> + .num_parents = 2,
>>> + /*
>>> + * When the driver uses this clock, needs to specify the patent clock
>>> + * he wants in the dts.
>>> + */
>> For each clock type, if this flag is going to be used, I'd like a clear
>> explanation about why it is use-case dependent and why you need manual
>> control over this. Same applies to all the occurence.
>>
>>> + .flags = CLK_SET_RATE_NO_REPARENT | CLK_SET_RATE_PARENT,
>>> + },
>>> +};
>>
On 2023/1/20 17:47, Jerome Brunet wrote:
> [ EXTERNAL EMAIL ]
>
>
> On Fri 20 Jan 2023 at 11:33, Yu Tu <[email protected]> wrote:
>
>> Hi
>> On 2023/1/19 19:37, Jerome Brunet wrote:
>>> [ EXTERNAL EMAIL ]
>>> On Mon 16 Jan 2023 at 15:42, Yu Tu <[email protected]> wrote:
>>>
>>>> Add the peripherals clock controller driver in the s4 SoC family.
>>>>
>>>> Signed-off-by: Yu Tu <[email protected]>
>>> [...]
>>>
>>>> +
>>>> +/* Video Clocks */
>>>> +static struct clk_regmap s4_vid_pll_div = {
>>>> + .data = &(struct meson_vid_pll_div_data){
>>>> + .val = {
>>>> + .reg_off = CLKCTRL_VID_PLL_CLK_DIV,
>>>> + .shift = 0,
>>>> + .width = 15,
>>>> + },
>>>> + .sel = {
>>>> + .reg_off = CLKCTRL_VID_PLL_CLK_DIV,
>>>> + .shift = 16,
>>>> + .width = 2,
>>>> + },
>>>> + },
>>>> + .hw.init = &(struct clk_init_data) {
>>>> + .name = "vid_pll_div",
>>>> + /*
>>>> + * The frequency division from the hdmi_pll clock to the vid_pll_div
>>>> + * clock is the default value of this register. When designing the
>>>> + * video module of the chip, a default value that can meet the
>>>> + * requirements of the video module will be solidified according
>>>> + * to the usage requirements of the chip, so as to facilitate chip
>>>> + * simulation. So this is ro_ops.
>>>> + * It is important to note that this clock is not used on this
>>>> + * chip and is described only for the integrity of the clock tree.
>>>> + */
>>> If it is reset value and will be applicable to all the design, regarless
>>> of the use-case, then yes RO ops is OK
>>>
>>> >From what I understand here, the value will depend on the use-case requirements.
>>> This is a typical case where the DT prop "assigned-rate" should be used, not RO ops.
>>
>> Check the previous chip history, the actual scene is not used at all,
>> basically is used in simulation. So the previous SOC was "ro_ops" without
>> any problems. This S4 SOC is not actually useful either.
>>
>> So when you were upstream, you had no problem making "ro_ops". I wonder if
>> I could delete this useless clock, so you don't have to worry about it.
>
> I don't know what to make of this. What is the point of adding a useless
> clock ?
As explained earlier this "vid_pll_div" is actually used in chip
emulation. So next I'd like to know what you suggest to do with the clock?
By the way, the late S-Series chips removed this clock.
>
>>
>>>
>>>> + .ops = &meson_vid_pll_div_ro_ops,
>>>> + .parent_data = (const struct clk_parent_data []) {
>>>> + { .fw_name = "hdmi_pll", }
>>>> + },
>>>> + .num_parents = 1,
>>>> + .flags = CLK_SET_RATE_PARENT,
>>>> + },
>>>> +};
>>>> +
>>>
>>>> +
>>>> +/* VDEC clocks */
>>>> +static const struct clk_parent_data s4_dec_parent_data[] = {
>>>> + { .fw_name = "fclk_div2p5", },
>>>> + { .fw_name = "fclk_div3", },
>>>> + { .fw_name = "fclk_div4", },
>>>> + { .fw_name = "fclk_div5", },
>>>> + { .fw_name = "fclk_div7", },
>>>> + { .fw_name = "hifi_pll", },
>>>> + { .fw_name = "gp0_pll", },
>>>> + { .fw_name = "xtal", }
>>>> +};
>>>> +
>>>> +static struct clk_regmap s4_vdec_p0_mux = {
>>>> + .data = &(struct clk_regmap_mux_data){
>>>> + .offset = CLKCTRL_VDEC_CLK_CTRL,
>>>> + .mask = 0x7,
>>>> + .shift = 9,
>>>> + .flags = CLK_MUX_ROUND_CLOSEST,
>>>> + },
>>>> + .hw.init = &(struct clk_init_data) {
>>>> + .name = "vdec_p0_mux",
>>>> + .ops = &clk_regmap_mux_ops,
>>>> + .parent_data = s4_dec_parent_data,
>>>> + .num_parents = ARRAY_SIZE(s4_dec_parent_data),
>>>> + /*
>>>> + * When the driver uses this clock, needs to specify the patent clock
>>>> + * he wants in the dts.
>>> s/patent/parent ?
>>> s/he wants/it requires ?
>>
>> Okay.
>>
>>>
>>>> + */
>>>> + .flags = CLK_SET_RATE_NO_REPARENT | CLK_SET_RATE_PARENT,
>>>> + },
>>>> +};
>>>> +
>>> [...]
>>>
>>>> +static const struct clk_parent_data s4_vpu_clkc_parent_data[] = {
>>>> + { .fw_name = "fclk_div4", },
>>>> + { .fw_name = "fclk_div3", },
>>>> + { .fw_name = "fclk_div5", },
>>>> + { .fw_name = "fclk_div7", },
>>>> + { .fw_name = "mpll1", },
>>>> + { .hw = &s4_vid_pll.hw },
>>>> + { .fw_name = "mpll2", },
>>>> + { .fw_name = "gp0_pll", },
>>>> +};
>>>> +
>>>> +static struct clk_regmap s4_vpu_clkc_p0_mux = {
>>>> + .data = &(struct clk_regmap_mux_data){
>>>> + .offset = CLKCTRL_VPU_CLKC_CTRL,
>>>> + .mask = 0x7,
>>>> + .shift = 9,
>>>> + },
>>>> + .hw.init = &(struct clk_init_data) {
>>>> + .name = "vpu_clkc_p0_mux",
>>>> + .ops = &clk_regmap_mux_ops,
>>>> + .parent_data = s4_vpu_clkc_parent_data,
>>>> + .num_parents = ARRAY_SIZE(s4_vpu_clkc_parent_data),
>>>> + /*
>>>> + * When the driver uses this clock, needs to specify the patent clock
>>>> + * he wants in the dts.
>>>> + */
>>> That's quite a lot of occurences of the same comment.
>>> At the same time, other clocks with the same flag have no comment.
>>> Please make general comment, before the Video/VPU section, explaining
>>> which clocks needs on a use-case basis (through DT) and possibly how it
>>> should be set, what should drive the choices.
>>>
>>
>> The owner of the corresponding driver module wants to have a fixed clock,
>> but I can't explain every specific reason.
>
> Why can't you ?
>
>> So I'm going to change it all
>> to.flags = CLK_SET_RATE_PARENT in the next version. Let CCF choose the
>> appropriate clock as you suggested. If there is a corresponding module you
>> want to change, ask him to give you a specific explanation. Do you think
>> that's all right?
>
> If the flag is actually required and there is a reason, no it is not.
>
I will try to communicate with each module that uses the corresponding
clock and provide an explanation if necessary in next edition.
>>
>> I will not reply to you below.
>
> Noted.
>
>>
>>>> + .flags = CLK_SET_RATE_NO_REPARENT | CLK_SET_RATE_PARENT,
>>>> + },
>>>> +};
>>>> +
>>>
>>>> +
>>>> +/* EMMC/NAND clock */
>>>> +static const struct clk_parent_data s4_sd_emmc_clk0_parent_data[] = {
>>>> + { .fw_name = "xtal", },
>>>> + { .fw_name = "fclk_div2", },
>>>> + { .fw_name = "fclk_div3", },
>>>> + { .fw_name = "hifi_pll", },
>>>> + { .fw_name = "fclk_div2p5", },
>>>> + { .fw_name = "mpll2", },
>>>> + { .fw_name = "mpll3", },
>>>> + { .fw_name = "gp0_pll", },
>>>> +};
>>>> +
>>>> +static struct clk_regmap s4_sd_emmc_c_clk0_sel = {
>>>> + .data = &(struct clk_regmap_mux_data){
>>>> + .offset = CLKCTRL_NAND_CLK_CTRL,
>>>> + .mask = 0x7,
>>>> + .shift = 9,
>>>> + },
>>>> + .hw.init = &(struct clk_init_data) {
>>>> + .name = "sd_emmc_c_clk0_sel",
>>>> + .ops = &clk_regmap_mux_ops,
>>>> + .parent_data = s4_sd_emmc_clk0_parent_data,
>>>> + .num_parents = ARRAY_SIZE(s4_sd_emmc_clk0_parent_data),
>>>> + /*
>>>> + * When the driver uses this clock, needs to specify the patent clock
>>>> + * he wants in the dts.
>>>> + */
>>> I'm getting a bit suspicious about the use (and abuse ...) of this flag.
>>> I don't quite get how selecting the base PLL for MMC should be done on
>>> use-case basis and should be up the board DT ...
>>> Other SoC have all used fdiv2 so far. Do you expect this setting to be
>>> part of the dtsi SoC file ?
>>>
>>>> + .flags = CLK_SET_RATE_NO_REPARENT | CLK_SET_RATE_PARENT,
>>>> + },
>>>> +};
>>>> +
>>>
>>>> +
>>>> +/* SPICC Clock */
>>>> +static const struct clk_parent_data s4_spicc_parent_data[] = {
>>>> + { .fw_name = "xtal", },
>>>> + { .hw = &s4_sys_clk.hw },
>>>> + { .fw_name = "fclk_div4", },
>>>> + { .fw_name = "fclk_div3", },
>>>> + { .fw_name = "fclk_div2", },
>>>> + { .fw_name = "fclk_div5", },
>>>> + { .fw_name = "fclk_div7", },
>>>> +};
>>>> +
>>>> +static struct clk_regmap s4_spicc0_mux = {
>>>> + .data = &(struct clk_regmap_mux_data){
>>>> + .offset = CLKCTRL_SPICC_CLK_CTRL,
>>>> + .mask = 0x7,
>>>> + .shift = 7,
>>>> + },
>>>> + .hw.init = &(struct clk_init_data) {
>>>> + .name = "spicc0_mux",
>>>> + .ops = &clk_regmap_mux_ops,
>>>> + .parent_data = s4_spicc_parent_data,
>>>> + .num_parents = ARRAY_SIZE(s4_spicc_parent_data),
>>>> + /*
>>>> + * When the driver uses this clock, needs to specify the patent clock
>>>> + * he wants in the dts.
>>>> + */
>>> This is getting too far. All the parent clocks are fixed.
>>> Let CCF do the job of picking the most adequate clock for the job
>>> instead of manually settings things
>>>
>>>> + .flags = CLK_SET_RATE_NO_REPARENT | CLK_SET_RATE_PARENT,
>>>> + },
>>>> +};
>>>> +
>>>
>>>> +
>>>> +/* PWM Clock */
>>>> +static const struct clk_parent_data s4_pwm_parent_data[] = {
>>>> + { .fw_name = "xtal", },
>>>> + { .hw = &s4_vid_pll.hw },
>>>> + { .fw_name = "fclk_div4", },
>>>> + { .fw_name = "fclk_div3", },
>>>> +};
>>>> +
>>>> +static struct clk_regmap s4_pwm_a_mux = {
>>>> + .data = &(struct clk_regmap_mux_data) {
>>>> + .offset = CLKCTRL_PWM_CLK_AB_CTRL,
>>>> + .mask = 0x3,
>>>> + .shift = 9,
>>>> + },
>>>> + .hw.init = &(struct clk_init_data){
>>>> + .name = "pwm_a_mux",
>>>> + .ops = &clk_regmap_mux_ops,
>>>> + .parent_data = s4_pwm_parent_data,
>>>> + .num_parents = ARRAY_SIZE(s4_pwm_parent_data),
>>>> + /*
>>>> + * When the driver uses this clock, needs to specify the patent clock
>>>> + * he wants in the dts.
>>>> + */
>>> Same here ... this is really going to far.
>>>
>>>> + .flags = CLK_SET_RATE_NO_REPARENT | CLK_SET_RATE_PARENT,
>>>> + },
>>>> +};
>>>> +
>>>
>>>> +
>>>> +static struct clk_regmap s4_saradc_mux = {
>>>> + .data = &(struct clk_regmap_mux_data) {
>>>> + .offset = CLKCTRL_SAR_CLK_CTRL,
>>>> + .mask = 0x3,
>>>> + .shift = 9,
>>>> + },
>>>> + .hw.init = &(struct clk_init_data){
>>>> + .name = "saradc_mux",
>>>> + .ops = &clk_regmap_mux_ops,
>>>> + .parent_data = (const struct clk_parent_data []) {
>>>> + { .fw_name = "xtal", },
>>>> + { .hw = &s4_sys_clk.hw },
>>>> + },
>>>> + .num_parents = 2,
>>>> + /*
>>>> + * When the driver uses this clock, needs to specify the patent clock
>>>> + * he wants in the dts.
>>>> + */
>>> For each clock type, if this flag is going to be used, I'd like a clear
>>> explanation about why it is use-case dependent and why you need manual
>>> control over this. Same applies to all the occurence.
>>>
>>>> + .flags = CLK_SET_RATE_NO_REPARENT | CLK_SET_RATE_PARENT,
>>>> + },
>>>> +};
>>>
>
On Sat 28 Jan 2023 at 18:17, Yu Tu <[email protected]> wrote:
> On 2023/1/20 17:47, Jerome Brunet wrote:
>> [ EXTERNAL EMAIL ]
>> On Fri 20 Jan 2023 at 11:33, Yu Tu <[email protected]> wrote:
>>
>>> Hi
>>> On 2023/1/19 19:37, Jerome Brunet wrote:
>>>> [ EXTERNAL EMAIL ]
>>>> On Mon 16 Jan 2023 at 15:42, Yu Tu <[email protected]> wrote:
>>>>
>>>>> Add the peripherals clock controller driver in the s4 SoC family.
>>>>>
>>>>> Signed-off-by: Yu Tu <[email protected]>
>>>> [...]
>>>>
>>>>> +
>>>>> +/* Video Clocks */
>>>>> +static struct clk_regmap s4_vid_pll_div = {
>>>>> + .data = &(struct meson_vid_pll_div_data){
>>>>> + .val = {
>>>>> + .reg_off = CLKCTRL_VID_PLL_CLK_DIV,
>>>>> + .shift = 0,
>>>>> + .width = 15,
>>>>> + },
>>>>> + .sel = {
>>>>> + .reg_off = CLKCTRL_VID_PLL_CLK_DIV,
>>>>> + .shift = 16,
>>>>> + .width = 2,
>>>>> + },
>>>>> + },
>>>>> + .hw.init = &(struct clk_init_data) {
>>>>> + .name = "vid_pll_div",
>>>>> + /*
>>>>> + * The frequency division from the hdmi_pll clock to the vid_pll_div
>>>>> + * clock is the default value of this register. When designing the
>>>>> + * video module of the chip, a default value that can meet the
>>>>> + * requirements of the video module will be solidified according
>>>>> + * to the usage requirements of the chip, so as to facilitate chip
>>>>> + * simulation. So this is ro_ops.
>>>>> + * It is important to note that this clock is not used on this
>>>>> + * chip and is described only for the integrity of the clock tree.
>>>>> + */
>>>> If it is reset value and will be applicable to all the design, regarless
>>>> of the use-case, then yes RO ops is OK
>>>>
>>>> >From what I understand here, the value will depend on the use-case requirements.
>>>> This is a typical case where the DT prop "assigned-rate" should be used, not RO ops.
>>>
>>> Check the previous chip history, the actual scene is not used at all,
>>> basically is used in simulation. So the previous SOC was "ro_ops" without
>>> any problems. This S4 SOC is not actually useful either.
>>>
>>> So when you were upstream, you had no problem making "ro_ops". I wonder if
>>> I could delete this useless clock, so you don't have to worry about it.
>> I don't know what to make of this. What is the point of adding a useless
>> clock ?
>
> As explained earlier this "vid_pll_div" is actually used in chip
> emulation. So next I'd like to know what you suggest to do with the clock?
>
If it does not exist in the actual SoC, please remove it
On 2023/1/30 17:06, Jerome Brunet wrote:
> [ EXTERNAL EMAIL ]
>
>
> On Sat 28 Jan 2023 at 18:17, Yu Tu <[email protected]> wrote:
>
>> On 2023/1/20 17:47, Jerome Brunet wrote:
>>> [ EXTERNAL EMAIL ]
>>> On Fri 20 Jan 2023 at 11:33, Yu Tu <[email protected]> wrote:
>>>
>>>> Hi
>>>> On 2023/1/19 19:37, Jerome Brunet wrote:
>>>>> [ EXTERNAL EMAIL ]
>>>>> On Mon 16 Jan 2023 at 15:42, Yu Tu <[email protected]> wrote:
>>>>>
>>>>>> Add the peripherals clock controller driver in the s4 SoC family.
>>>>>>
>>>>>> Signed-off-by: Yu Tu <[email protected]>
>>>>> [...]
>>>>>
>>>>>> +
>>>>>> +/* Video Clocks */
>>>>>> +static struct clk_regmap s4_vid_pll_div = {
>>>>>> + .data = &(struct meson_vid_pll_div_data){
>>>>>> + .val = {
>>>>>> + .reg_off = CLKCTRL_VID_PLL_CLK_DIV,
>>>>>> + .shift = 0,
>>>>>> + .width = 15,
>>>>>> + },
>>>>>> + .sel = {
>>>>>> + .reg_off = CLKCTRL_VID_PLL_CLK_DIV,
>>>>>> + .shift = 16,
>>>>>> + .width = 2,
>>>>>> + },
>>>>>> + },
>>>>>> + .hw.init = &(struct clk_init_data) {
>>>>>> + .name = "vid_pll_div",
>>>>>> + /*
>>>>>> + * The frequency division from the hdmi_pll clock to the vid_pll_div
>>>>>> + * clock is the default value of this register. When designing the
>>>>>> + * video module of the chip, a default value that can meet the
>>>>>> + * requirements of the video module will be solidified according
>>>>>> + * to the usage requirements of the chip, so as to facilitate chip
>>>>>> + * simulation. So this is ro_ops.
>>>>>> + * It is important to note that this clock is not used on this
>>>>>> + * chip and is described only for the integrity of the clock tree.
>>>>>> + */
>>>>> If it is reset value and will be applicable to all the design, regarless
>>>>> of the use-case, then yes RO ops is OK
>>>>>
>>>>> >From what I understand here, the value will depend on the use-case requirements.
>>>>> This is a typical case where the DT prop "assigned-rate" should be used, not RO ops.
>>>>
>>>> Check the previous chip history, the actual scene is not used at all,
>>>> basically is used in simulation. So the previous SOC was "ro_ops" without
>>>> any problems. This S4 SOC is not actually useful either.
>>>>
>>>> So when you were upstream, you had no problem making "ro_ops". I wonder if
>>>> I could delete this useless clock, so you don't have to worry about it.
>>> I don't know what to make of this. What is the point of adding a useless
>>> clock ?
>>
>> As explained earlier this "vid_pll_div" is actually used in chip
>> emulation. So next I'd like to know what you suggest to do with the clock?
>>
>
> If it does not exist in the actual SoC, please remove it
>
If I remove it, the "vid_pll_sel" clock will be missing a parent
(vid_pll_div). I will use the table method and give the above reasons.
Do you accept this method?
On Mon 30 Jan 2023 at 17:41, Yu Tu <[email protected]> wrote:
> On 2023/1/30 17:06, Jerome Brunet wrote:
>> [ EXTERNAL EMAIL ]
>> On Sat 28 Jan 2023 at 18:17, Yu Tu <[email protected]> wrote:
>>
>>> On 2023/1/20 17:47, Jerome Brunet wrote:
>>>> [ EXTERNAL EMAIL ]
>>>> On Fri 20 Jan 2023 at 11:33, Yu Tu <[email protected]> wrote:
>>>>
>>>>> Hi
>>>>> On 2023/1/19 19:37, Jerome Brunet wrote:
>>>>>> [ EXTERNAL EMAIL ]
>>>>>> On Mon 16 Jan 2023 at 15:42, Yu Tu <[email protected]> wrote:
>>>>>>
>>>>>>> Add the peripherals clock controller driver in the s4 SoC family.
>>>>>>>
>>>>>>> Signed-off-by: Yu Tu <[email protected]>
>>>>>> [...]
>>>>>>
>>>>>>> +
>>>>>>> +/* Video Clocks */
>>>>>>> +static struct clk_regmap s4_vid_pll_div = {
>>>>>>> + .data = &(struct meson_vid_pll_div_data){
>>>>>>> + .val = {
>>>>>>> + .reg_off = CLKCTRL_VID_PLL_CLK_DIV,
>>>>>>> + .shift = 0,
>>>>>>> + .width = 15,
>>>>>>> + },
>>>>>>> + .sel = {
>>>>>>> + .reg_off = CLKCTRL_VID_PLL_CLK_DIV,
>>>>>>> + .shift = 16,
>>>>>>> + .width = 2,
>>>>>>> + },
>>>>>>> + },
>>>>>>> + .hw.init = &(struct clk_init_data) {
>>>>>>> + .name = "vid_pll_div",
>>>>>>> + /*
>>>>>>> + * The frequency division from the hdmi_pll clock to the vid_pll_div
>>>>>>> + * clock is the default value of this register. When designing the
>>>>>>> + * video module of the chip, a default value that can meet the
>>>>>>> + * requirements of the video module will be solidified according
>>>>>>> + * to the usage requirements of the chip, so as to facilitate chip
>>>>>>> + * simulation. So this is ro_ops.
>>>>>>> + * It is important to note that this clock is not used on this
>>>>>>> + * chip and is described only for the integrity of the clock tree.
>>>>>>> + */
>>>>>> If it is reset value and will be applicable to all the design, regarless
>>>>>> of the use-case, then yes RO ops is OK
>>>>>>
>>>>>> >From what I understand here, the value will depend on the use-case requirements.
>>>>>> This is a typical case where the DT prop "assigned-rate" should be used, not RO ops.
>>>>>
>>>>> Check the previous chip history, the actual scene is not used at all,
>>>>> basically is used in simulation. So the previous SOC was "ro_ops" without
>>>>> any problems. This S4 SOC is not actually useful either.
>>>>>
>>>>> So when you were upstream, you had no problem making "ro_ops". I wonder if
>>>>> I could delete this useless clock, so you don't have to worry about it.
>>>> I don't know what to make of this. What is the point of adding a useless
>>>> clock ?
>>>
>>> As explained earlier this "vid_pll_div" is actually used in chip
>>> emulation. So next I'd like to know what you suggest to do with the clock?
>>>
>> If it does not exist in the actual SoC, please remove it
>>
>
> If I remove it, the "vid_pll_sel" clock will be missing a parent
> (vid_pll_div). I will use the table method and give the above reasons. Do
> you accept this method?
Either the clock exists or it does not.
If the HW actually exist, it is expected to be properly described.
If it does not, it obviously cannot be an input to another clock.
Please sort this out and make the necessary changes.
On 2023/1/30 17:47, Jerome Brunet wrote:
> [ EXTERNAL EMAIL ]
>
>
> On Mon 30 Jan 2023 at 17:41, Yu Tu <[email protected]> wrote:
>
>> On 2023/1/30 17:06, Jerome Brunet wrote:
>>> [ EXTERNAL EMAIL ]
>>> On Sat 28 Jan 2023 at 18:17, Yu Tu <[email protected]> wrote:
>>>
>>>> On 2023/1/20 17:47, Jerome Brunet wrote:
>>>>> [ EXTERNAL EMAIL ]
>>>>> On Fri 20 Jan 2023 at 11:33, Yu Tu <[email protected]> wrote:
>>>>>
>>>>>> Hi
>>>>>> On 2023/1/19 19:37, Jerome Brunet wrote:
>>>>>>> [ EXTERNAL EMAIL ]
>>>>>>> On Mon 16 Jan 2023 at 15:42, Yu Tu <[email protected]> wrote:
>>>>>>>
>>>>>>>> Add the peripherals clock controller driver in the s4 SoC family.
>>>>>>>>
>>>>>>>> Signed-off-by: Yu Tu <[email protected]>
>>>>>>> [...]
>>>>>>>
>>>>>>>> +
>>>>>>>> +/* Video Clocks */
>>>>>>>> +static struct clk_regmap s4_vid_pll_div = {
>>>>>>>> + .data = &(struct meson_vid_pll_div_data){
>>>>>>>> + .val = {
>>>>>>>> + .reg_off = CLKCTRL_VID_PLL_CLK_DIV,
>>>>>>>> + .shift = 0,
>>>>>>>> + .width = 15,
>>>>>>>> + },
>>>>>>>> + .sel = {
>>>>>>>> + .reg_off = CLKCTRL_VID_PLL_CLK_DIV,
>>>>>>>> + .shift = 16,
>>>>>>>> + .width = 2,
>>>>>>>> + },
>>>>>>>> + },
>>>>>>>> + .hw.init = &(struct clk_init_data) {
>>>>>>>> + .name = "vid_pll_div",
>>>>>>>> + /*
>>>>>>>> + * The frequency division from the hdmi_pll clock to the vid_pll_div
>>>>>>>> + * clock is the default value of this register. When designing the
>>>>>>>> + * video module of the chip, a default value that can meet the
>>>>>>>> + * requirements of the video module will be solidified according
>>>>>>>> + * to the usage requirements of the chip, so as to facilitate chip
>>>>>>>> + * simulation. So this is ro_ops.
>>>>>>>> + * It is important to note that this clock is not used on this
>>>>>>>> + * chip and is described only for the integrity of the clock tree.
>>>>>>>> + */
>>>>>>> If it is reset value and will be applicable to all the design, regarless
>>>>>>> of the use-case, then yes RO ops is OK
>>>>>>>
>>>>>>> >From what I understand here, the value will depend on the use-case requirements.
>>>>>>> This is a typical case where the DT prop "assigned-rate" should be used, not RO ops.
>>>>>>
>>>>>> Check the previous chip history, the actual scene is not used at all,
>>>>>> basically is used in simulation. So the previous SOC was "ro_ops" without
>>>>>> any problems. This S4 SOC is not actually useful either.
>>>>>>
>>>>>> So when you were upstream, you had no problem making "ro_ops". I wonder if
>>>>>> I could delete this useless clock, so you don't have to worry about it.
>>>>> I don't know what to make of this. What is the point of adding a useless
>>>>> clock ?
>>>>
>>>> As explained earlier this "vid_pll_div" is actually used in chip
>>>> emulation. So next I'd like to know what you suggest to do with the clock?
>>>>
>>> If it does not exist in the actual SoC, please remove it
>>>
>>
>> If I remove it, the "vid_pll_sel" clock will be missing a parent
>> (vid_pll_div). I will use the table method and give the above reasons. Do
>> you accept this method?
>
> Either the clock exists or it does not.
>
> If the HW actually exist, it is expected to be properly described.
> If it does not, it obviously cannot be an input to another clock.
>
> Please sort this out and make the necessary changes.
>
The CLKCTRL_VID_PLL_CLK_DIV register is actually described, but it is
not used in the actual board. According to your reply just now,
description is required, but I want to know how to describe it to meet
your requirements.
Please give me some suggestions.
On Mon 30 Jan 2023 at 17:59, Yu Tu <[email protected]> wrote:
> On 2023/1/30 17:47, Jerome Brunet wrote:
>> [ EXTERNAL EMAIL ]
>> On Mon 30 Jan 2023 at 17:41, Yu Tu <[email protected]> wrote:
>>
>>> On 2023/1/30 17:06, Jerome Brunet wrote:
>>>> [ EXTERNAL EMAIL ]
>>>> On Sat 28 Jan 2023 at 18:17, Yu Tu <[email protected]> wrote:
>>>>
>>>>> On 2023/1/20 17:47, Jerome Brunet wrote:
>>>>>> [ EXTERNAL EMAIL ]
>>>>>> On Fri 20 Jan 2023 at 11:33, Yu Tu <[email protected]> wrote:
>>>>>>
>>>>>>> Hi
>>>>>>> On 2023/1/19 19:37, Jerome Brunet wrote:
>>>>>>>> [ EXTERNAL EMAIL ]
>>>>>>>> On Mon 16 Jan 2023 at 15:42, Yu Tu <[email protected]> wrote:
>>>>>>>>
>>>>>>>>> Add the peripherals clock controller driver in the s4 SoC family.
>>>>>>>>>
>>>>>>>>> Signed-off-by: Yu Tu <[email protected]>
>>>>>>>> [...]
>>>>>>>>
>>>>>>>>> +
>>>>>>>>> +/* Video Clocks */
>>>>>>>>> +static struct clk_regmap s4_vid_pll_div = {
>>>>>>>>> + .data = &(struct meson_vid_pll_div_data){
>>>>>>>>> + .val = {
>>>>>>>>> + .reg_off = CLKCTRL_VID_PLL_CLK_DIV,
>>>>>>>>> + .shift = 0,
>>>>>>>>> + .width = 15,
>>>>>>>>> + },
>>>>>>>>> + .sel = {
>>>>>>>>> + .reg_off = CLKCTRL_VID_PLL_CLK_DIV,
>>>>>>>>> + .shift = 16,
>>>>>>>>> + .width = 2,
>>>>>>>>> + },
>>>>>>>>> + },
>>>>>>>>> + .hw.init = &(struct clk_init_data) {
>>>>>>>>> + .name = "vid_pll_div",
>>>>>>>>> + /*
>>>>>>>>> + * The frequency division from the hdmi_pll clock to the vid_pll_div
>>>>>>>>> + * clock is the default value of this register. When designing the
>>>>>>>>> + * video module of the chip, a default value that can meet the
>>>>>>>>> + * requirements of the video module will be solidified according
>>>>>>>>> + * to the usage requirements of the chip, so as to facilitate chip
>>>>>>>>> + * simulation. So this is ro_ops.
>>>>>>>>> + * It is important to note that this clock is not used on this
>>>>>>>>> + * chip and is described only for the integrity of the clock tree.
>>>>>>>>> + */
>>>>>>>> If it is reset value and will be applicable to all the design, regarless
>>>>>>>> of the use-case, then yes RO ops is OK
>>>>>>>>
>>>>>>>> >From what I understand here, the value will depend on the use-case requirements.
>>>>>>>> This is a typical case where the DT prop "assigned-rate" should be used, not RO ops.
>>>>>>>
>>>>>>> Check the previous chip history, the actual scene is not used at all,
>>>>>>> basically is used in simulation. So the previous SOC was "ro_ops" without
>>>>>>> any problems. This S4 SOC is not actually useful either.
>>>>>>>
>>>>>>> So when you were upstream, you had no problem making "ro_ops". I wonder if
>>>>>>> I could delete this useless clock, so you don't have to worry about it.
>>>>>> I don't know what to make of this. What is the point of adding a useless
>>>>>> clock ?
>>>>>
>>>>> As explained earlier this "vid_pll_div" is actually used in chip
>>>>> emulation. So next I'd like to know what you suggest to do with the clock?
>>>>>
>>>> If it does not exist in the actual SoC, please remove it
>>>>
>>>
>>> If I remove it, the "vid_pll_sel" clock will be missing a parent
>>> (vid_pll_div). I will use the table method and give the above reasons. Do
>>> you accept this method?
>> Either the clock exists or it does not.
>> If the HW actually exist, it is expected to be properly described.
>> If it does not, it obviously cannot be an input to another clock.
>> Please sort this out and make the necessary changes.
>>
>
> The CLKCTRL_VID_PLL_CLK_DIV register is actually described, but it is not
> used in the actual board. According to your reply just now, description is
> required, but I want to know how to describe it to meet your requirements.
>
> Please give me some suggestions.
Implementing things is NOT about usage, it is about correctness.
Either there is actually a clock in the silicon you are producing at the
Amlogic factory, or there is not.
If the clock is there in the actual HW should be properly
described/implemented, as it "might" be used as an input to other clocks
- even if you personnaly don't.
If clock does not exists (nothing behind the registers, or broken, etc
...) then, yes you'll need to use parent tables and document this.
On 2023/1/30 18:07, Jerome Brunet wrote:
> [ EXTERNAL EMAIL ]
>
>
> On Mon 30 Jan 2023 at 17:59, Yu Tu <[email protected]> wrote:
>
>> On 2023/1/30 17:47, Jerome Brunet wrote:
>>> [ EXTERNAL EMAIL ]
>>> On Mon 30 Jan 2023 at 17:41, Yu Tu <[email protected]> wrote:
>>>
>>>> On 2023/1/30 17:06, Jerome Brunet wrote:
>>>>> [ EXTERNAL EMAIL ]
>>>>> On Sat 28 Jan 2023 at 18:17, Yu Tu <[email protected]> wrote:
>>>>>
>>>>>> On 2023/1/20 17:47, Jerome Brunet wrote:
>>>>>>> [ EXTERNAL EMAIL ]
>>>>>>> On Fri 20 Jan 2023 at 11:33, Yu Tu <[email protected]> wrote:
>>>>>>>
>>>>>>>> Hi
>>>>>>>> On 2023/1/19 19:37, Jerome Brunet wrote:
>>>>>>>>> [ EXTERNAL EMAIL ]
>>>>>>>>> On Mon 16 Jan 2023 at 15:42, Yu Tu <[email protected]> wrote:
>>>>>>>>>
>>>>>>>>>> Add the peripherals clock controller driver in the s4 SoC family.
>>>>>>>>>>
>>>>>>>>>> Signed-off-by: Yu Tu <[email protected]>
>>>>>>>>> [...]
>>>>>>>>>
>>>>>>>>>> +
>>>>>>>>>> +/* Video Clocks */
>>>>>>>>>> +static struct clk_regmap s4_vid_pll_div = {
>>>>>>>>>> + .data = &(struct meson_vid_pll_div_data){
>>>>>>>>>> + .val = {
>>>>>>>>>> + .reg_off = CLKCTRL_VID_PLL_CLK_DIV,
>>>>>>>>>> + .shift = 0,
>>>>>>>>>> + .width = 15,
>>>>>>>>>> + },
>>>>>>>>>> + .sel = {
>>>>>>>>>> + .reg_off = CLKCTRL_VID_PLL_CLK_DIV,
>>>>>>>>>> + .shift = 16,
>>>>>>>>>> + .width = 2,
>>>>>>>>>> + },
>>>>>>>>>> + },
>>>>>>>>>> + .hw.init = &(struct clk_init_data) {
>>>>>>>>>> + .name = "vid_pll_div",
>>>>>>>>>> + /*
>>>>>>>>>> + * The frequency division from the hdmi_pll clock to the vid_pll_div
>>>>>>>>>> + * clock is the default value of this register. When designing the
>>>>>>>>>> + * video module of the chip, a default value that can meet the
>>>>>>>>>> + * requirements of the video module will be solidified according
>>>>>>>>>> + * to the usage requirements of the chip, so as to facilitate chip
>>>>>>>>>> + * simulation. So this is ro_ops.
>>>>>>>>>> + * It is important to note that this clock is not used on this
>>>>>>>>>> + * chip and is described only for the integrity of the clock tree.
>>>>>>>>>> + */
>>>>>>>>> If it is reset value and will be applicable to all the design, regarless
>>>>>>>>> of the use-case, then yes RO ops is OK
>>>>>>>>>
>>>>>>>>> >From what I understand here, the value will depend on the use-case requirements.
>>>>>>>>> This is a typical case where the DT prop "assigned-rate" should be used, not RO ops.
>>>>>>>>
>>>>>>>> Check the previous chip history, the actual scene is not used at all,
>>>>>>>> basically is used in simulation. So the previous SOC was "ro_ops" without
>>>>>>>> any problems. This S4 SOC is not actually useful either.
>>>>>>>>
>>>>>>>> So when you were upstream, you had no problem making "ro_ops". I wonder if
>>>>>>>> I could delete this useless clock, so you don't have to worry about it.
>>>>>>> I don't know what to make of this. What is the point of adding a useless
>>>>>>> clock ?
>>>>>>
>>>>>> As explained earlier this "vid_pll_div" is actually used in chip
>>>>>> emulation. So next I'd like to know what you suggest to do with the clock?
>>>>>>
>>>>> If it does not exist in the actual SoC, please remove it
>>>>>
>>>>
>>>> If I remove it, the "vid_pll_sel" clock will be missing a parent
>>>> (vid_pll_div). I will use the table method and give the above reasons. Do
>>>> you accept this method?
>>> Either the clock exists or it does not.
>>> If the HW actually exist, it is expected to be properly described.
>>> If it does not, it obviously cannot be an input to another clock.
>>> Please sort this out and make the necessary changes.
>>>
>>
>> The CLKCTRL_VID_PLL_CLK_DIV register is actually described, but it is not
>> used in the actual board. According to your reply just now, description is
>> required, but I want to know how to describe it to meet your requirements.
>>
>> Please give me some suggestions.
>
> Implementing things is NOT about usage, it is about correctness.
> Either there is actually a clock in the silicon you are producing at the
> Amlogic factory, or there is not.
>
> If the clock is there in the actual HW should be properly
> described/implemented, as it "might" be used as an input to other clocks
> - even if you personnaly don't.
>
> If clock does not exists (nothing behind the registers, or broken, etc
> ...) then, yes you'll need to use parent tables and document this.
>
According to your suggestion, we need to describe the clock
(vid_pll_div).So it seems like we need to implement
"meson_vid_pll_div_ops" and do a commit first. Then submit the S4 SOC
clock driver. So change whether you take it or not?
Or if you have a better idea, let me know.