2023-01-16 13:22:55

by Amelie Delaunay

Subject: [PATCH v2] ARM: dts: stm32: Fix User button on stm32mp135f-dk

This patch fixes the following dtbs_check warning on stm32mp135f-dk:
arch/arm/boot/dts/stm32mp135f-dk.dtb: gpio-keys: 'user-pa13' does not match any of the regexes: '^(button|event|key|switch|(button|event|key|switch)-[a-z0-9-]+|[a-z0-9-]+-(button|event|key|switch))$', 'pinctrl-[0-9]+'
From schema: Documentation/devicetree/bindings/input/gpio-keys.yaml

It renames user-pa13 node into button-user so that it matches gpio-keys
bindings.

Signed-off-by: Amelie Delaunay <[email protected]>
---
arch/arm/boot/dts/stm32mp135f-dk.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/stm32mp135f-dk.dts b/arch/arm/boot/dts/stm32mp135f-dk.dts
index 9ff5a3eaf55b..931877d6ddb9 100644
--- a/arch/arm/boot/dts/stm32mp135f-dk.dts
+++ b/arch/arm/boot/dts/stm32mp135f-dk.dts
@@ -40,7 +40,7 @@ optee@dd000000 {
gpio-keys {
compatible = "gpio-keys";

- user-pa13 {
+ button-user {
label = "User-PA13";
linux,code = <BTN_1>;
gpios = <&gpioa 13 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
--
2.25.1

2023-01-17 11:57:47

by Alexandre TORGUE

Subject: Re: [PATCH v2] ARM: dts: stm32: Fix User button on stm32mp135f-dk

Hi Amélie

On 1/16/23 12:57, Amelie Delaunay wrote:
> This patch fixes the following dtbs_check warning on stm32mp135f-dk:
> arch/arm/boot/dts/stm32mp135f-dk.dtb: gpio-keys: 'user-pa13' does not match any of the regexes: '^(button|event|key|switch|(button|event|key|switch)-[a-z0-9-]+|[a-z0-9-]+-(button|event|key|switch))$', 'pinctrl-[0-9]+'
> From schema: Documentation/devicetree/bindings/input/gpio-keys.yaml
>
> It renames user-pa13 node into button-user so that it matches gpio-keys
> bindings.
>
> Signed-off-by: Amelie Delaunay <[email protected]>
> ---
> arch/arm/boot/dts/stm32mp135f-dk.dts | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/stm32mp135f-dk.dts b/arch/arm/boot/dts/stm32mp135f-dk.dts
> index 9ff5a3eaf55b..931877d6ddb9 100644
> --- a/arch/arm/boot/dts/stm32mp135f-dk.dts
> +++ b/arch/arm/boot/dts/stm32mp135f-dk.dts
> @@ -40,7 +40,7 @@ optee@dd000000 {
> gpio-keys {
> compatible = "gpio-keys";
>
> - user-pa13 {
> + button-user {
> label = "User-PA13";
> linux,code = <BTN_1>;
> gpios = <&gpioa 13 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;


Thanks for the cleaning. Applied on stm32-next.

Thanks.
Alex