Cleanup by removing unneeded quotes from refs and redundant blank lines.
No functional impact except adjusting to preferred coding style.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
---
.../bindings/spi/allwinner,sun4i-a10-spi.yaml | 2 +-
.../bindings/spi/allwinner,sun6i-a31-spi.yaml | 2 +-
.../bindings/spi/amlogic,meson-gx-spicc.yaml | 6 +++---
.../bindings/spi/amlogic,meson6-spifc.yaml | 6 +++---
.../bindings/spi/aspeed,ast2600-fmc.yaml | 2 +-
.../devicetree/bindings/spi/cdns,qspi-nor.yaml | 2 +-
.../devicetree/bindings/spi/cdns,xspi.yaml | 6 +++---
.../bindings/spi/fsl,spi-fsl-qspi.yaml | 2 +-
.../devicetree/bindings/spi/fsl-imx-cspi.yaml | 2 +-
.../bindings/spi/mediatek,spi-mt65xx.yaml | 2 +-
.../spi/mediatek,spi-slave-mt27xx.yaml | 2 +-
.../bindings/spi/mikrotik,rb4xx-spi.yaml | 2 +-
.../bindings/spi/mxicy,mx25f0a-spi.yaml | 2 +-
.../devicetree/bindings/spi/mxs-spi.yaml | 2 +-
.../bindings/spi/nvidia,tegra210-quad.yaml | 2 +-
.../bindings/spi/qcom,spi-qcom-qspi.yaml | 5 ++---
.../bindings/spi/realtek,rtl-spi.yaml | 2 +-
.../bindings/spi/snps,dw-apb-ssi.yaml | 2 +-
.../devicetree/bindings/spi/spi-cadence.yaml | 2 +-
.../devicetree/bindings/spi/spi-fsl-lpspi.yaml | 2 +-
.../devicetree/bindings/spi/spi-gpio.yaml | 4 ++--
.../devicetree/bindings/spi/spi-mux.yaml | 4 ++--
.../devicetree/bindings/spi/spi-nxp-fspi.yaml | 2 +-
.../devicetree/bindings/spi/spi-pl022.yaml | 18 +++++++++---------
.../devicetree/bindings/spi/spi-rockchip.yaml | 2 +-
.../devicetree/bindings/spi/spi-sifive.yaml | 6 +++---
.../bindings/spi/spi-sunplus-sp7021.yaml | 2 +-
.../devicetree/bindings/spi/spi-xilinx.yaml | 2 +-
.../bindings/spi/spi-zynqmp-qspi.yaml | 2 +-
.../devicetree/bindings/spi/sprd,spi-adi.yaml | 5 ++---
.../devicetree/bindings/spi/st,stm32-qspi.yaml | 2 +-
.../devicetree/bindings/spi/st,stm32-spi.yaml | 2 +-
.../bindings/spi/xlnx,zynq-qspi.yaml | 2 +-
33 files changed, 53 insertions(+), 55 deletions(-)
diff --git a/Documentation/devicetree/bindings/spi/allwinner,sun4i-a10-spi.yaml b/Documentation/devicetree/bindings/spi/allwinner,sun4i-a10-spi.yaml
index f1176a28fd87..eb0567b2971a 100644
--- a/Documentation/devicetree/bindings/spi/allwinner,sun4i-a10-spi.yaml
+++ b/Documentation/devicetree/bindings/spi/allwinner,sun4i-a10-spi.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
title: Allwinner A10 SPI Controller
allOf:
- - $ref: "spi-controller.yaml"
+ - $ref: spi-controller.yaml
maintainers:
- Chen-Yu Tsai <[email protected]>
diff --git a/Documentation/devicetree/bindings/spi/allwinner,sun6i-a31-spi.yaml b/Documentation/devicetree/bindings/spi/allwinner,sun6i-a31-spi.yaml
index 58b7056f4a70..acf218507d22 100644
--- a/Documentation/devicetree/bindings/spi/allwinner,sun6i-a31-spi.yaml
+++ b/Documentation/devicetree/bindings/spi/allwinner,sun6i-a31-spi.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
title: Allwinner A31 SPI Controller
allOf:
- - $ref: "spi-controller.yaml"
+ - $ref: spi-controller.yaml
maintainers:
- Chen-Yu Tsai <[email protected]>
diff --git a/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml b/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml
index 53eb6562b979..e5eca3a6f132 100644
--- a/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml
+++ b/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml
@@ -2,8 +2,8 @@
# Copyright 2019 BayLibre, SAS
%YAML 1.2
---
-$id: "http://devicetree.org/schemas/spi/amlogic,meson-gx-spicc.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/spi/amlogic,meson-gx-spicc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Amlogic Meson SPI Communication Controller
@@ -41,7 +41,7 @@ properties:
maxItems: 2
allOf:
- - $ref: "spi-controller.yaml#"
+ - $ref: spi-controller.yaml#
- if:
properties:
compatible:
diff --git a/Documentation/devicetree/bindings/spi/amlogic,meson6-spifc.yaml b/Documentation/devicetree/bindings/spi/amlogic,meson6-spifc.yaml
index ac3b2ec300ac..806043fed4d1 100644
--- a/Documentation/devicetree/bindings/spi/amlogic,meson6-spifc.yaml
+++ b/Documentation/devicetree/bindings/spi/amlogic,meson6-spifc.yaml
@@ -2,8 +2,8 @@
# Copyright 2019 BayLibre, SAS
%YAML 1.2
---
-$id: "http://devicetree.org/schemas/spi/amlogic,meson6-spifc.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/spi/amlogic,meson6-spifc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Amlogic Meson SPI Flash Controller
@@ -11,7 +11,7 @@ maintainers:
- Neil Armstrong <[email protected]>
allOf:
- - $ref: "spi-controller.yaml#"
+ - $ref: spi-controller.yaml#
description: |
The Meson SPIFC is a controller optimized for communication with SPI
diff --git a/Documentation/devicetree/bindings/spi/aspeed,ast2600-fmc.yaml b/Documentation/devicetree/bindings/spi/aspeed,ast2600-fmc.yaml
index e6c817de3449..aae6fb139b5b 100644
--- a/Documentation/devicetree/bindings/spi/aspeed,ast2600-fmc.yaml
+++ b/Documentation/devicetree/bindings/spi/aspeed,ast2600-fmc.yaml
@@ -15,7 +15,7 @@ description: |
SPI) of the AST2400, AST2500 and AST2600 SOCs.
allOf:
- - $ref: "spi-controller.yaml#"
+ - $ref: spi-controller.yaml#
properties:
compatible:
diff --git a/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml b/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml
index 4707294d8f59..9be4e2c5d1ee 100644
--- a/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml
+++ b/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml
@@ -47,7 +47,7 @@ properties:
cdns,fifo-depth:
description:
Size of the data FIFO in words.
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
enum: [ 128, 256 ]
default: 128
diff --git a/Documentation/devicetree/bindings/spi/cdns,xspi.yaml b/Documentation/devicetree/bindings/spi/cdns,xspi.yaml
index b8bb8a3dbf54..eb0f92468185 100644
--- a/Documentation/devicetree/bindings/spi/cdns,xspi.yaml
+++ b/Documentation/devicetree/bindings/spi/cdns,xspi.yaml
@@ -2,8 +2,8 @@
# Copyright 2020-21 Cadence
%YAML 1.2
---
-$id: "http://devicetree.org/schemas/spi/cdns,xspi.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/spi/cdns,xspi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Cadence XSPI Controller
@@ -16,7 +16,7 @@ description: |
read/write access to slaves such as SPI-NOR flash.
allOf:
- - $ref: "spi-controller.yaml#"
+ - $ref: spi-controller.yaml#
properties:
compatible:
diff --git a/Documentation/devicetree/bindings/spi/fsl,spi-fsl-qspi.yaml b/Documentation/devicetree/bindings/spi/fsl,spi-fsl-qspi.yaml
index e58644558412..f2dd20370dbb 100644
--- a/Documentation/devicetree/bindings/spi/fsl,spi-fsl-qspi.yaml
+++ b/Documentation/devicetree/bindings/spi/fsl,spi-fsl-qspi.yaml
@@ -10,7 +10,7 @@ maintainers:
- Han Xu <[email protected]>
allOf:
- - $ref: "spi-controller.yaml#"
+ - $ref: spi-controller.yaml#
properties:
compatible:
diff --git a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.yaml b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.yaml
index 12cb76711000..2f593c7225e5 100644
--- a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.yaml
+++ b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.yaml
@@ -10,7 +10,7 @@ maintainers:
- Shawn Guo <[email protected]>
allOf:
- - $ref: "/schemas/spi/spi-controller.yaml#"
+ - $ref: /schemas/spi/spi-controller.yaml#
properties:
compatible:
diff --git a/Documentation/devicetree/bindings/spi/mediatek,spi-mt65xx.yaml b/Documentation/devicetree/bindings/spi/mediatek,spi-mt65xx.yaml
index 8d2a6c084eab..b6249880c3f9 100644
--- a/Documentation/devicetree/bindings/spi/mediatek,spi-mt65xx.yaml
+++ b/Documentation/devicetree/bindings/spi/mediatek,spi-mt65xx.yaml
@@ -10,7 +10,7 @@ maintainers:
- Leilk Liu <[email protected]>
allOf:
- - $ref: "/schemas/spi/spi-controller.yaml#"
+ - $ref: /schemas/spi/spi-controller.yaml#
properties:
compatible:
diff --git a/Documentation/devicetree/bindings/spi/mediatek,spi-slave-mt27xx.yaml b/Documentation/devicetree/bindings/spi/mediatek,spi-slave-mt27xx.yaml
index 7977799a8ee1..d19c9f73978f 100644
--- a/Documentation/devicetree/bindings/spi/mediatek,spi-slave-mt27xx.yaml
+++ b/Documentation/devicetree/bindings/spi/mediatek,spi-slave-mt27xx.yaml
@@ -10,7 +10,7 @@ maintainers:
- Leilk Liu <[email protected]>
allOf:
- - $ref: "/schemas/spi/spi-controller.yaml#"
+ - $ref: /schemas/spi/spi-controller.yaml#
properties:
compatible:
diff --git a/Documentation/devicetree/bindings/spi/mikrotik,rb4xx-spi.yaml b/Documentation/devicetree/bindings/spi/mikrotik,rb4xx-spi.yaml
index 3fd0a8adfe9a..303f6dca89c0 100644
--- a/Documentation/devicetree/bindings/spi/mikrotik,rb4xx-spi.yaml
+++ b/Documentation/devicetree/bindings/spi/mikrotik,rb4xx-spi.yaml
@@ -11,7 +11,7 @@ maintainers:
- Bert Vermeulen <[email protected]>
allOf:
- - $ref: "spi-controller.yaml#"
+ - $ref: spi-controller.yaml#
properties:
compatible:
diff --git a/Documentation/devicetree/bindings/spi/mxicy,mx25f0a-spi.yaml b/Documentation/devicetree/bindings/spi/mxicy,mx25f0a-spi.yaml
index a3aa5e07c0e4..221fe6e2ef53 100644
--- a/Documentation/devicetree/bindings/spi/mxicy,mx25f0a-spi.yaml
+++ b/Documentation/devicetree/bindings/spi/mxicy,mx25f0a-spi.yaml
@@ -10,7 +10,7 @@ maintainers:
- Miquel Raynal <[email protected]>
allOf:
- - $ref: "spi-controller.yaml#"
+ - $ref: spi-controller.yaml#
properties:
compatible:
diff --git a/Documentation/devicetree/bindings/spi/mxs-spi.yaml b/Documentation/devicetree/bindings/spi/mxs-spi.yaml
index 51f8c664323e..e2512166c1cd 100644
--- a/Documentation/devicetree/bindings/spi/mxs-spi.yaml
+++ b/Documentation/devicetree/bindings/spi/mxs-spi.yaml
@@ -10,7 +10,7 @@ maintainers:
- Marek Vasut <[email protected]>
allOf:
- - $ref: "/schemas/spi/spi-controller.yaml#"
+ - $ref: /schemas/spi/spi-controller.yaml#
properties:
compatible:
diff --git a/Documentation/devicetree/bindings/spi/nvidia,tegra210-quad.yaml b/Documentation/devicetree/bindings/spi/nvidia,tegra210-quad.yaml
index 899100e783c9..9f78b2c06494 100644
--- a/Documentation/devicetree/bindings/spi/nvidia,tegra210-quad.yaml
+++ b/Documentation/devicetree/bindings/spi/nvidia,tegra210-quad.yaml
@@ -11,7 +11,7 @@ maintainers:
- Jonathan Hunter <[email protected]>
allOf:
- - $ref: "spi-controller.yaml#"
+ - $ref: spi-controller.yaml#
properties:
compatible:
diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml b/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml
index b622bb7363ec..85e7770703bd 100644
--- a/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml
+++ b/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml
@@ -1,9 +1,8 @@
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
-
%YAML 1.2
---
-$id: "http://devicetree.org/schemas/spi/qcom,spi-qcom-qspi.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/spi/qcom,spi-qcom-qspi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Qualcomm Quad Serial Peripheral Interface (QSPI)
diff --git a/Documentation/devicetree/bindings/spi/realtek,rtl-spi.yaml b/Documentation/devicetree/bindings/spi/realtek,rtl-spi.yaml
index 2f938c293f70..70330d945a70 100644
--- a/Documentation/devicetree/bindings/spi/realtek,rtl-spi.yaml
+++ b/Documentation/devicetree/bindings/spi/realtek,rtl-spi.yaml
@@ -11,7 +11,7 @@ maintainers:
- Birger Koblitz <[email protected]>
allOf:
- - $ref: "spi-controller.yaml#"
+ - $ref: spi-controller.yaml#
properties:
compatible:
diff --git a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml
index d33b72fabc5d..a132b5fc56e0 100644
--- a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml
+++ b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml
@@ -10,7 +10,7 @@ maintainers:
- Mark Brown <[email protected]>
allOf:
- - $ref: "spi-controller.yaml#"
+ - $ref: spi-controller.yaml#
- if:
properties:
compatible:
diff --git a/Documentation/devicetree/bindings/spi/spi-cadence.yaml b/Documentation/devicetree/bindings/spi/spi-cadence.yaml
index 64bf4e621142..b0f83b5c2cdd 100644
--- a/Documentation/devicetree/bindings/spi/spi-cadence.yaml
+++ b/Documentation/devicetree/bindings/spi/spi-cadence.yaml
@@ -10,7 +10,7 @@ maintainers:
- Michal Simek <[email protected]>
allOf:
- - $ref: "spi-controller.yaml#"
+ - $ref: spi-controller.yaml#
properties:
compatible:
diff --git a/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.yaml b/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.yaml
index 94caa2b7e241..e91425012319 100644
--- a/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.yaml
+++ b/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.yaml
@@ -10,7 +10,7 @@ maintainers:
- Anson Huang <[email protected]>
allOf:
- - $ref: "/schemas/spi/spi-controller.yaml#"
+ - $ref: /schemas/spi/spi-controller.yaml#
properties:
compatible:
diff --git a/Documentation/devicetree/bindings/spi/spi-gpio.yaml b/Documentation/devicetree/bindings/spi/spi-gpio.yaml
index f29b89076c99..9ce1df93d4c3 100644
--- a/Documentation/devicetree/bindings/spi/spi-gpio.yaml
+++ b/Documentation/devicetree/bindings/spi/spi-gpio.yaml
@@ -14,7 +14,7 @@ description:
dedicated GPIO lines.
allOf:
- - $ref: "/schemas/spi/spi-controller.yaml#"
+ - $ref: /schemas/spi/spi-controller.yaml#
properties:
compatible:
@@ -41,7 +41,7 @@ properties:
num-chipselects:
description: Number of chipselect lines. Should be <0> if a single device
with no chip select is connected.
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
# Deprecated properties
gpio-sck: false
diff --git a/Documentation/devicetree/bindings/spi/spi-mux.yaml b/Documentation/devicetree/bindings/spi/spi-mux.yaml
index 7ea79f6d33f3..fb2a6039928c 100644
--- a/Documentation/devicetree/bindings/spi/spi-mux.yaml
+++ b/Documentation/devicetree/bindings/spi/spi-mux.yaml
@@ -30,8 +30,8 @@ description: |
+------------+
allOf:
- - $ref: "/schemas/spi/spi-controller.yaml#"
- - $ref: "/schemas/spi/spi-peripheral-props.yaml#"
+ - $ref: /schemas/spi/spi-controller.yaml#
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
maintainers:
- Chris Packham <[email protected]>
diff --git a/Documentation/devicetree/bindings/spi/spi-nxp-fspi.yaml b/Documentation/devicetree/bindings/spi/spi-nxp-fspi.yaml
index 1b552c298277..a813c971ecf6 100644
--- a/Documentation/devicetree/bindings/spi/spi-nxp-fspi.yaml
+++ b/Documentation/devicetree/bindings/spi/spi-nxp-fspi.yaml
@@ -11,7 +11,7 @@ maintainers:
- Kuldeep Singh <[email protected]>
allOf:
- - $ref: "spi-controller.yaml#"
+ - $ref: spi-controller.yaml#
properties:
compatible:
diff --git a/Documentation/devicetree/bindings/spi/spi-pl022.yaml b/Documentation/devicetree/bindings/spi/spi-pl022.yaml
index 0e382119c64f..91e540a92faf 100644
--- a/Documentation/devicetree/bindings/spi/spi-pl022.yaml
+++ b/Documentation/devicetree/bindings/spi/spi-pl022.yaml
@@ -10,7 +10,7 @@ maintainers:
- Linus Walleij <[email protected]>
allOf:
- - $ref: "spi-controller.yaml#"
+ - $ref: spi-controller.yaml#
# We need a select here so we don't match all nodes with 'arm,primecell'
select:
@@ -45,7 +45,7 @@ properties:
description: delay in ms following transfer completion before the
runtime power management system suspends the device. A setting of 0
indicates no delay and the device will be suspended immediately.
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
pl022,rt:
description: indicates the controller should run the message pump with realtime
@@ -81,7 +81,7 @@ patternProperties:
properties:
pl022,interface:
description: SPI interface type
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
enum:
- 0 # SPI
- 1 # Texas Instruments Synchronous Serial Frame Format
@@ -89,7 +89,7 @@ patternProperties:
pl022,com-mode:
description: Specifies the transfer mode
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
enum:
- 0 # interrupt mode
- 1 # polling mode
@@ -98,30 +98,30 @@ patternProperties:
pl022,rx-level-trig:
description: Rx FIFO watermark level
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 4
pl022,tx-level-trig:
description: Tx FIFO watermark level
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 4
pl022,ctrl-len:
description: Microwire interface - Control length
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
minimum: 0x03
maximum: 0x1f
pl022,wait-state:
description: Microwire interface - Wait state
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1]
pl022,duplex:
description: Microwire interface - Full/Half duplex
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1]
required:
diff --git a/Documentation/devicetree/bindings/spi/spi-rockchip.yaml b/Documentation/devicetree/bindings/spi/spi-rockchip.yaml
index 66e49947b703..e4941e9212d1 100644
--- a/Documentation/devicetree/bindings/spi/spi-rockchip.yaml
+++ b/Documentation/devicetree/bindings/spi/spi-rockchip.yaml
@@ -11,7 +11,7 @@ description:
as flash and display controllers using the SPI communication interface.
allOf:
- - $ref: "spi-controller.yaml#"
+ - $ref: spi-controller.yaml#
maintainers:
- Heiko Stuebner <[email protected]>
diff --git a/Documentation/devicetree/bindings/spi/spi-sifive.yaml b/Documentation/devicetree/bindings/spi/spi-sifive.yaml
index 6e7e394fc1e4..5bffefb9c7eb 100644
--- a/Documentation/devicetree/bindings/spi/spi-sifive.yaml
+++ b/Documentation/devicetree/bindings/spi/spi-sifive.yaml
@@ -12,7 +12,7 @@ maintainers:
- Palmer Dabbelt <[email protected]>
allOf:
- - $ref: "spi-controller.yaml#"
+ - $ref: spi-controller.yaml#
properties:
compatible:
@@ -51,14 +51,14 @@ properties:
sifive,fifo-depth:
description:
Depth of hardware queues; defaults to 8
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
enum: [8]
default: 8
sifive,max-bits-per-word:
description:
Maximum bits per word; defaults to 8
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1, 2, 3, 4, 5, 6, 7, 8]
default: 8
diff --git a/Documentation/devicetree/bindings/spi/spi-sunplus-sp7021.yaml b/Documentation/devicetree/bindings/spi/spi-sunplus-sp7021.yaml
index 3a58cf0f1ec8..69a463305274 100644
--- a/Documentation/devicetree/bindings/spi/spi-sunplus-sp7021.yaml
+++ b/Documentation/devicetree/bindings/spi/spi-sunplus-sp7021.yaml
@@ -8,7 +8,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
title: Sunplus sp7021 SPI controller
allOf:
- - $ref: "spi-controller.yaml"
+ - $ref: spi-controller.yaml
maintainers:
- Li-hao Kuo <[email protected]>
diff --git a/Documentation/devicetree/bindings/spi/spi-xilinx.yaml b/Documentation/devicetree/bindings/spi/spi-xilinx.yaml
index bbb735603f29..6bd83836eded 100644
--- a/Documentation/devicetree/bindings/spi/spi-xilinx.yaml
+++ b/Documentation/devicetree/bindings/spi/spi-xilinx.yaml
@@ -10,7 +10,7 @@ maintainers:
- Michal Simek <[email protected]>
allOf:
- - $ref: "spi-controller.yaml#"
+ - $ref: spi-controller.yaml#
properties:
compatible:
diff --git a/Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.yaml b/Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.yaml
index 546c416cdb55..20f77246d365 100644
--- a/Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.yaml
+++ b/Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.yaml
@@ -10,7 +10,7 @@ maintainers:
- Michal Simek <[email protected]>
allOf:
- - $ref: "spi-controller.yaml#"
+ - $ref: spi-controller.yaml#
properties:
compatible:
diff --git a/Documentation/devicetree/bindings/spi/sprd,spi-adi.yaml b/Documentation/devicetree/bindings/spi/sprd,spi-adi.yaml
index a3ab1a1f1eb4..903b06f88b1b 100644
--- a/Documentation/devicetree/bindings/spi/sprd,spi-adi.yaml
+++ b/Documentation/devicetree/bindings/spi/sprd,spi-adi.yaml
@@ -1,9 +1,8 @@
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
-
%YAML 1.2
---
-$id: "http://devicetree.org/schemas/spi/sprd,spi-adi.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/spi/sprd,spi-adi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Spreadtrum ADI controller
diff --git a/Documentation/devicetree/bindings/spi/st,stm32-qspi.yaml b/Documentation/devicetree/bindings/spi/st,stm32-qspi.yaml
index 1eb17f7a4d86..8bba965a9ae6 100644
--- a/Documentation/devicetree/bindings/spi/st,stm32-qspi.yaml
+++ b/Documentation/devicetree/bindings/spi/st,stm32-qspi.yaml
@@ -11,7 +11,7 @@ maintainers:
- Patrice Chotard <[email protected]>
allOf:
- - $ref: "spi-controller.yaml#"
+ - $ref: spi-controller.yaml#
properties:
compatible:
diff --git a/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml b/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml
index 1cda15f91cc3..d35c6f7e2dd5 100644
--- a/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml
+++ b/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml
@@ -17,7 +17,7 @@ maintainers:
- Fabrice Gasnier <[email protected]>
allOf:
- - $ref: "spi-controller.yaml#"
+ - $ref: spi-controller.yaml#
- if:
properties:
compatible:
diff --git a/Documentation/devicetree/bindings/spi/xlnx,zynq-qspi.yaml b/Documentation/devicetree/bindings/spi/xlnx,zynq-qspi.yaml
index 1f1c40a9f320..83e8fb4a548d 100644
--- a/Documentation/devicetree/bindings/spi/xlnx,zynq-qspi.yaml
+++ b/Documentation/devicetree/bindings/spi/xlnx,zynq-qspi.yaml
@@ -11,7 +11,7 @@ description:
memory devices.
allOf:
- - $ref: "spi-controller.yaml#"
+ - $ref: spi-controller.yaml#
maintainers:
- Michal Simek <[email protected]>
--
2.34.1
Cleanup examples:
- use 4-space indentation (for cases when it is neither 4 not 2 space),
- drop redundant blank lines,
- use lowercase hex.
No functional impact except adjusting to preferred coding style.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
---
.../bindings/spi/amlogic,meson-gx-spicc.yaml | 26 +--
.../bindings/spi/amlogic,meson6-spifc.yaml | 22 +--
.../bindings/spi/aspeed,ast2600-fmc.yaml | 24 +--
.../bindings/spi/brcm,spi-bcm-qspi.yaml | 156 +++++++++---------
.../bindings/spi/cdns,qspi-nor.yaml | 4 +-
.../bindings/spi/nvidia,tegra210-quad.yaml | 42 ++---
.../bindings/spi/qcom,spi-qcom-qspi.yaml | 1 -
.../devicetree/bindings/spi/renesas,rspi.yaml | 22 +--
.../bindings/spi/spi-sunplus-sp7021.yaml | 4 +-
.../devicetree/bindings/spi/st,stm32-spi.yaml | 1 -
10 files changed, 150 insertions(+), 152 deletions(-)
diff --git a/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml b/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml
index e5eca3a6f132..4e28e6e9d8e0 100644
--- a/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml
+++ b/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml
@@ -100,17 +100,17 @@ unevaluatedProperties: false
examples:
- |
spi@c1108d80 {
- compatible = "amlogic,meson-gx-spicc";
- reg = <0xc1108d80 0x80>;
- interrupts = <112>;
- clocks = <&clk81>;
- clock-names = "core";
- #address-cells = <1>;
- #size-cells = <0>;
-
- display@0 {
- compatible = "lg,lg4573";
- spi-max-frequency = <1000000>;
- reg = <0>;
- };
+ compatible = "amlogic,meson-gx-spicc";
+ reg = <0xc1108d80 0x80>;
+ interrupts = <112>;
+ clocks = <&clk81>;
+ clock-names = "core";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ display@0 {
+ compatible = "lg,lg4573";
+ spi-max-frequency = <1000000>;
+ reg = <0>;
+ };
};
diff --git a/Documentation/devicetree/bindings/spi/amlogic,meson6-spifc.yaml b/Documentation/devicetree/bindings/spi/amlogic,meson6-spifc.yaml
index 806043fed4d1..8e769ccda97f 100644
--- a/Documentation/devicetree/bindings/spi/amlogic,meson6-spifc.yaml
+++ b/Documentation/devicetree/bindings/spi/amlogic,meson6-spifc.yaml
@@ -40,15 +40,15 @@ unevaluatedProperties: false
examples:
- |
spi@c1108c80 {
- compatible = "amlogic,meson6-spifc";
- reg = <0xc1108c80 0x80>;
- clocks = <&clk81>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- flash: flash@0 {
- compatible = "spansion,m25p80", "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <40000000>;
- };
+ compatible = "amlogic,meson6-spifc";
+ reg = <0xc1108c80 0x80>;
+ clocks = <&clk81>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ flash: flash@0 {
+ compatible = "spansion,m25p80", "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <40000000>;
+ };
};
diff --git a/Documentation/devicetree/bindings/spi/aspeed,ast2600-fmc.yaml b/Documentation/devicetree/bindings/spi/aspeed,ast2600-fmc.yaml
index aae6fb139b5b..57d932af4506 100644
--- a/Documentation/devicetree/bindings/spi/aspeed,ast2600-fmc.yaml
+++ b/Documentation/devicetree/bindings/spi/aspeed,ast2600-fmc.yaml
@@ -60,23 +60,23 @@ examples:
interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
flash@0 {
- reg = < 0 >;
- compatible = "jedec,spi-nor";
- spi-max-frequency = <50000000>;
- spi-rx-bus-width = <2>;
+ reg = < 0 >;
+ compatible = "jedec,spi-nor";
+ spi-max-frequency = <50000000>;
+ spi-rx-bus-width = <2>;
};
flash@1 {
- reg = < 1 >;
- compatible = "jedec,spi-nor";
- spi-max-frequency = <50000000>;
- spi-rx-bus-width = <2>;
+ reg = < 1 >;
+ compatible = "jedec,spi-nor";
+ spi-max-frequency = <50000000>;
+ spi-rx-bus-width = <2>;
};
flash@2 {
- reg = < 2 >;
- compatible = "jedec,spi-nor";
- spi-max-frequency = <50000000>;
- spi-rx-bus-width = <2>;
+ reg = < 2 >;
+ compatible = "jedec,spi-nor";
+ spi-max-frequency = <50000000>;
+ spi-rx-bus-width = <2>;
};
};
diff --git a/Documentation/devicetree/bindings/spi/brcm,spi-bcm-qspi.yaml b/Documentation/devicetree/bindings/spi/brcm,spi-bcm-qspi.yaml
index ec5873919170..28222aae3077 100644
--- a/Documentation/devicetree/bindings/spi/brcm,spi-bcm-qspi.yaml
+++ b/Documentation/devicetree/bindings/spi/brcm,spi-bcm-qspi.yaml
@@ -99,98 +99,98 @@ required:
examples:
- | # BRCMSTB SoC: SPI Master (MSPI+BSPI) for SPI-NOR access
spi@f03e3400 {
- compatible = "brcm,spi-brcmstb-qspi", "brcm,spi-bcm-qspi";
- reg = <0xf03e3400 0x188>, <0xf03e3200 0x50>, <0xf03e0920 0x4>;
- reg-names = "mspi", "bspi", "cs_reg";
- interrupts = <0x5>, <0x6>, <0x1>, <0x2>, <0x3>, <0x4>, <0x0>;
- interrupt-parent = <&gic>;
- interrupt-names = "mspi_done",
- "mspi_halted",
- "spi_lr_fullness_reached",
- "spi_lr_session_aborted",
- "spi_lr_impatient",
- "spi_lr_session_done",
- "spi_lr_overread";
- clocks = <&hif_spi>;
- #address-cells = <0x1>;
- #size-cells = <0x0>;
-
- flash@0 {
- #size-cells = <0x2>;
- #address-cells = <0x2>;
- compatible = "m25p80";
- reg = <0x0>;
- spi-max-frequency = <0x2625a00>;
- spi-cpol;
- spi-cpha;
- };
+ compatible = "brcm,spi-brcmstb-qspi", "brcm,spi-bcm-qspi";
+ reg = <0xf03e3400 0x188>, <0xf03e3200 0x50>, <0xf03e0920 0x4>;
+ reg-names = "mspi", "bspi", "cs_reg";
+ interrupts = <0x5>, <0x6>, <0x1>, <0x2>, <0x3>, <0x4>, <0x0>;
+ interrupt-parent = <&gic>;
+ interrupt-names = "mspi_done",
+ "mspi_halted",
+ "spi_lr_fullness_reached",
+ "spi_lr_session_aborted",
+ "spi_lr_impatient",
+ "spi_lr_session_done",
+ "spi_lr_overread";
+ clocks = <&hif_spi>;
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+
+ flash@0 {
+ #size-cells = <0x2>;
+ #address-cells = <0x2>;
+ compatible = "m25p80";
+ reg = <0x0>;
+ spi-max-frequency = <0x2625a00>;
+ spi-cpol;
+ spi-cpha;
+ };
};
- | # BRCMSTB SoC: MSPI master for any SPI device
spi@f0416000 {
- clocks = <&upg_fixed>;
- compatible = "brcm,spi-brcmstb-mspi", "brcm,spi-bcm-qspi";
- reg = <0xf0416000 0x180>;
- reg-names = "mspi";
- interrupts = <0x14>;
- interrupt-parent = <&irq0_aon_intc>;
- interrupt-names = "mspi_done";
- #address-cells = <1>;
- #size-cells = <0>;
+ clocks = <&upg_fixed>;
+ compatible = "brcm,spi-brcmstb-mspi", "brcm,spi-bcm-qspi";
+ reg = <0xf0416000 0x180>;
+ reg-names = "mspi";
+ interrupts = <0x14>;
+ interrupt-parent = <&irq0_aon_intc>;
+ interrupt-names = "mspi_done";
+ #address-cells = <1>;
+ #size-cells = <0>;
};
- | # iProc SoC
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
spi@18027200 {
- compatible = "brcm,spi-nsp-qspi", "brcm,spi-bcm-qspi";
- reg = <0x18027200 0x184>,
- <0x18027000 0x124>,
- <0x1811c408 0x004>,
- <0x180273a0 0x01c>;
- reg-names = "mspi", "bspi", "intr_regs", "intr_status_reg";
- interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "mspi_done",
- "mspi_halted",
- "spi_lr_fullness_reached",
- "spi_lr_session_aborted",
- "spi_lr_impatient",
- "spi_lr_session_done";
- clocks = <&iprocmed>;
- num-cs = <2>;
- #address-cells = <1>;
- #size-cells = <0>;
+ compatible = "brcm,spi-nsp-qspi", "brcm,spi-bcm-qspi";
+ reg = <0x18027200 0x184>,
+ <0x18027000 0x124>,
+ <0x1811c408 0x004>,
+ <0x180273a0 0x01c>;
+ reg-names = "mspi", "bspi", "intr_regs", "intr_status_reg";
+ interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "mspi_done",
+ "mspi_halted",
+ "spi_lr_fullness_reached",
+ "spi_lr_session_aborted",
+ "spi_lr_impatient",
+ "spi_lr_session_done";
+ clocks = <&iprocmed>;
+ num-cs = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
};
- | # NS2 SoC
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
spi@66470200 {
- compatible = "brcm,spi-ns2-qspi", "brcm,spi-bcm-qspi";
- reg = <0x66470200 0x184>,
- <0x66470000 0x124>,
- <0x67017408 0x004>,
- <0x664703a0 0x01c>;
- reg-names = "mspi", "bspi", "intr_regs", "intr_status_reg";
- interrupts = <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "spi_l1_intr";
- clocks = <&iprocmed>;
- num-cs = <2>;
+ compatible = "brcm,spi-ns2-qspi", "brcm,spi-bcm-qspi";
+ reg = <0x66470200 0x184>,
+ <0x66470000 0x124>,
+ <0x67017408 0x004>,
+ <0x664703a0 0x01c>;
+ reg-names = "mspi", "bspi", "intr_regs", "intr_status_reg";
+ interrupts = <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "spi_l1_intr";
+ clocks = <&iprocmed>;
+ num-cs = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ flash@0 {
#address-cells = <1>;
- #size-cells = <0>;
-
- flash@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "m25p80";
- reg = <0x0>;
- spi-max-frequency = <12500000>;
- spi-cpol;
- spi-cpha;
- };
+ #size-cells = <1>;
+ compatible = "m25p80";
+ reg = <0x0>;
+ spi-max-frequency = <12500000>;
+ spi-cpol;
+ spi-cpha;
+ };
};
diff --git a/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml b/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml
index 9be4e2c5d1ee..7606b5a252b6 100644
--- a/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml
+++ b/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml
@@ -117,7 +117,7 @@ examples:
reset-names = "qspi", "qspi-ocp";
flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0x0>;
+ compatible = "jedec,spi-nor";
+ reg = <0x0>;
};
};
diff --git a/Documentation/devicetree/bindings/spi/nvidia,tegra210-quad.yaml b/Documentation/devicetree/bindings/spi/nvidia,tegra210-quad.yaml
index 9f78b2c06494..9ae1611175f2 100644
--- a/Documentation/devicetree/bindings/spi/nvidia,tegra210-quad.yaml
+++ b/Documentation/devicetree/bindings/spi/nvidia,tegra210-quad.yaml
@@ -74,25 +74,25 @@ examples:
#include <dt-bindings/reset/tegra210-car.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
spi@70410000 {
- compatible = "nvidia,tegra210-qspi";
- reg = <0x70410000 0x1000>;
- interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- clocks = <&tegra_car TEGRA210_CLK_QSPI>,
- <&tegra_car TEGRA210_CLK_QSPI_PM>;
- clock-names = "qspi", "qspi_out";
- resets = <&tegra_car 211>;
- dmas = <&apbdma 5>, <&apbdma 5>;
- dma-names = "rx", "tx";
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <104000000>;
- spi-tx-bus-width = <2>;
- spi-rx-bus-width = <2>;
- nvidia,tx-clk-tap-delay = <0>;
- nvidia,rx-clk-tap-delay = <0>;
- };
+ compatible = "nvidia,tegra210-qspi";
+ reg = <0x70410000 0x1000>;
+ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&tegra_car TEGRA210_CLK_QSPI>,
+ <&tegra_car TEGRA210_CLK_QSPI_PM>;
+ clock-names = "qspi", "qspi_out";
+ resets = <&tegra_car 211>;
+ dmas = <&apbdma 5>, <&apbdma 5>;
+ dma-names = "rx", "tx";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <104000000>;
+ spi-tx-bus-width = <2>;
+ spi-rx-bus-width = <2>;
+ nvidia,tx-clk-tap-delay = <0>;
+ nvidia,rx-clk-tap-delay = <0>;
+ };
};
diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml b/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml
index 85e7770703bd..e94d915e28c8 100644
--- a/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml
+++ b/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml
@@ -87,7 +87,6 @@ examples:
spi-tx-bus-width = <2>;
spi-rx-bus-width = <2>;
};
-
};
};
...
diff --git a/Documentation/devicetree/bindings/spi/renesas,rspi.yaml b/Documentation/devicetree/bindings/spi/renesas,rspi.yaml
index f45d3b75d6de..4d8ec69214c9 100644
--- a/Documentation/devicetree/bindings/spi/renesas,rspi.yaml
+++ b/Documentation/devicetree/bindings/spi/renesas,rspi.yaml
@@ -141,15 +141,15 @@ examples:
#include <dt-bindings/power/r8a7791-sysc.h>
qspi: spi@e6b10000 {
- compatible = "renesas,qspi-r8a7791", "renesas,qspi";
- reg = <0xe6b10000 0x2c>;
- interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 917>;
- dmas = <&dmac0 0x17>, <&dmac0 0x18>, <&dmac1 0x17>, <&dmac1 0x18>;
- dma-names = "tx", "rx", "tx", "rx";
- power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
- resets = <&cpg 917>;
- num-cs = <1>;
- #address-cells = <1>;
- #size-cells = <0>;
+ compatible = "renesas,qspi-r8a7791", "renesas,qspi";
+ reg = <0xe6b10000 0x2c>;
+ interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 917>;
+ dmas = <&dmac0 0x17>, <&dmac0 0x18>, <&dmac1 0x17>, <&dmac1 0x18>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 917>;
+ num-cs = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
};
diff --git a/Documentation/devicetree/bindings/spi/spi-sunplus-sp7021.yaml b/Documentation/devicetree/bindings/spi/spi-sunplus-sp7021.yaml
index 69a463305274..edb5ba71af3a 100644
--- a/Documentation/devicetree/bindings/spi/spi-sunplus-sp7021.yaml
+++ b/Documentation/devicetree/bindings/spi/spi-sunplus-sp7021.yaml
@@ -59,9 +59,9 @@ unevaluatedProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
- spi@9C002D80 {
+ spi@9c002d80 {
compatible = "sunplus,sp7021-spi";
- reg = <0x9C002D80 0x80>, <0x9C002E00 0x80>;
+ reg = <0x9c002d80 0x80>, <0x9c002e00 0x80>;
reg-names = "master", "slave";
interrupt-parent = <&intc>;
interrupt-names = "dma_w",
diff --git a/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml b/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml
index d35c6f7e2dd5..18afdaab946d 100644
--- a/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml
+++ b/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml
@@ -95,7 +95,6 @@ examples:
<&dmamux1 1 40 0x400 0x05>;
dma-names = "rx", "tx";
cs-gpios = <&gpioa 11 0>;
-
};
...
--
2.34.1
On Wed, Jan 18, 2023 at 6:39 PM Krzysztof Kozlowski
<[email protected]> wrote:
> Cleanup examples:
> - use 4-space indentation (for cases when it is neither 4 not 2 space),
> - drop redundant blank lines,
> - use lowercase hex.
>
> No functional impact except adjusting to preferred coding style.
>
> Signed-off-by: Krzysztof Kozlowski <[email protected]>
> .../devicetree/bindings/spi/renesas,rspi.yaml | 22 +--
Reviewed-by: Geert Uytterhoeven <[email protected]>
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
On Thu, 19 Jan 2023, at 04:09, Krzysztof Kozlowski wrote:
> Cleanup examples:
> - use 4-space indentation (for cases when it is neither 4 not 2 space),
> - drop redundant blank lines,
> - use lowercase hex.
>
> No functional impact except adjusting to preferred coding style.
>
> Signed-off-by: Krzysztof Kozlowski <[email protected]>
> ---
> .../bindings/spi/amlogic,meson-gx-spicc.yaml | 26 +--
> .../bindings/spi/amlogic,meson6-spifc.yaml | 22 +--
> .../bindings/spi/aspeed,ast2600-fmc.yaml | 24 +--
For the Aspeed change:
Reviewed-by: Andrew Jeffery <[email protected]>
On Thu, 19 Jan 2023, at 04:09, Krzysztof Kozlowski wrote:
> Cleanup by removing unneeded quotes from refs and redundant blank lines.
> No functional impact except adjusting to preferred coding style.
>
> Signed-off-by: Krzysztof Kozlowski <[email protected]>
> ---
> .../bindings/spi/allwinner,sun4i-a10-spi.yaml | 2 +-
> .../bindings/spi/allwinner,sun6i-a31-spi.yaml | 2 +-
> .../bindings/spi/amlogic,meson-gx-spicc.yaml | 6 +++---
> .../bindings/spi/amlogic,meson6-spifc.yaml | 6 +++---
> .../bindings/spi/aspeed,ast2600-fmc.yaml | 2 +-
For the Aspeed change:
Reviewed-by: Andrew Jeffery <[email protected]>
On 18/01/2023 18:39, Krzysztof Kozlowski wrote:
> Cleanup examples:
> - use 4-space indentation (for cases when it is neither 4 not 2 space),
> - drop redundant blank lines,
> - use lowercase hex.
>
> No functional impact except adjusting to preferred coding style.
>
> Signed-off-by: Krzysztof Kozlowski <[email protected]>
> ---
> .../bindings/spi/amlogic,meson-gx-spicc.yaml | 26 +--
> .../bindings/spi/amlogic,meson6-spifc.yaml | 22 +--
For meson changes:
Reviewed-by: Neil Armstrong <[email protected]>
> .../bindings/spi/aspeed,ast2600-fmc.yaml | 24 +--
> .../bindings/spi/brcm,spi-bcm-qspi.yaml | 156 +++++++++---------
> .../bindings/spi/cdns,qspi-nor.yaml | 4 +-
> .../bindings/spi/nvidia,tegra210-quad.yaml | 42 ++---
> .../bindings/spi/qcom,spi-qcom-qspi.yaml | 1 -
> .../devicetree/bindings/spi/renesas,rspi.yaml | 22 +--
> .../bindings/spi/spi-sunplus-sp7021.yaml | 4 +-
> .../devicetree/bindings/spi/st,stm32-spi.yaml | 1 -
> 10 files changed, 150 insertions(+), 152 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml b/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml
> index e5eca3a6f132..4e28e6e9d8e0 100644
> --- a/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml
> +++ b/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml
> @@ -100,17 +100,17 @@ unevaluatedProperties: false
> examples:
> - |
> spi@c1108d80 {
> - compatible = "amlogic,meson-gx-spicc";
> - reg = <0xc1108d80 0x80>;
> - interrupts = <112>;
> - clocks = <&clk81>;
> - clock-names = "core";
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - display@0 {
> - compatible = "lg,lg4573";
> - spi-max-frequency = <1000000>;
> - reg = <0>;
> - };
> + compatible = "amlogic,meson-gx-spicc";
> + reg = <0xc1108d80 0x80>;
> + interrupts = <112>;
> + clocks = <&clk81>;
> + clock-names = "core";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + display@0 {
> + compatible = "lg,lg4573";
> + spi-max-frequency = <1000000>;
> + reg = <0>;
> + };
> };
> diff --git a/Documentation/devicetree/bindings/spi/amlogic,meson6-spifc.yaml b/Documentation/devicetree/bindings/spi/amlogic,meson6-spifc.yaml
> index 806043fed4d1..8e769ccda97f 100644
> --- a/Documentation/devicetree/bindings/spi/amlogic,meson6-spifc.yaml
> +++ b/Documentation/devicetree/bindings/spi/amlogic,meson6-spifc.yaml
> @@ -40,15 +40,15 @@ unevaluatedProperties: false
> examples:
> - |
> spi@c1108c80 {
> - compatible = "amlogic,meson6-spifc";
> - reg = <0xc1108c80 0x80>;
> - clocks = <&clk81>;
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - flash: flash@0 {
> - compatible = "spansion,m25p80", "jedec,spi-nor";
> - reg = <0>;
> - spi-max-frequency = <40000000>;
> - };
> + compatible = "amlogic,meson6-spifc";
> + reg = <0xc1108c80 0x80>;
> + clocks = <&clk81>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + flash: flash@0 {
> + compatible = "spansion,m25p80", "jedec,spi-nor";
> + reg = <0>;
> + spi-max-frequency = <40000000>;
> + };
> };
<snip>
On 18/01/2023 18:39, Krzysztof Kozlowski wrote:
> Cleanup by removing unneeded quotes from refs and redundant blank lines.
> No functional impact except adjusting to preferred coding style.
>
> Signed-off-by: Krzysztof Kozlowski <[email protected]>
> ---
> .../bindings/spi/allwinner,sun4i-a10-spi.yaml | 2 +-
> .../bindings/spi/allwinner,sun6i-a31-spi.yaml | 2 +-
> .../bindings/spi/amlogic,meson-gx-spicc.yaml | 6 +++---
> .../bindings/spi/amlogic,meson6-spifc.yaml | 6 +++---
For meson changes:
Reviewed-by: Neil Armstrong <[email protected]>
> .../bindings/spi/aspeed,ast2600-fmc.yaml | 2 +-
> .../devicetree/bindings/spi/cdns,qspi-nor.yaml | 2 +-
> .../devicetree/bindings/spi/cdns,xspi.yaml | 6 +++---
> .../bindings/spi/fsl,spi-fsl-qspi.yaml | 2 +-
> .../devicetree/bindings/spi/fsl-imx-cspi.yaml | 2 +-
> .../bindings/spi/mediatek,spi-mt65xx.yaml | 2 +-
> .../spi/mediatek,spi-slave-mt27xx.yaml | 2 +-
> .../bindings/spi/mikrotik,rb4xx-spi.yaml | 2 +-
> .../bindings/spi/mxicy,mx25f0a-spi.yaml | 2 +-
> .../devicetree/bindings/spi/mxs-spi.yaml | 2 +-
> .../bindings/spi/nvidia,tegra210-quad.yaml | 2 +-
> .../bindings/spi/qcom,spi-qcom-qspi.yaml | 5 ++---
> .../bindings/spi/realtek,rtl-spi.yaml | 2 +-
> .../bindings/spi/snps,dw-apb-ssi.yaml | 2 +-
> .../devicetree/bindings/spi/spi-cadence.yaml | 2 +-
> .../devicetree/bindings/spi/spi-fsl-lpspi.yaml | 2 +-
> .../devicetree/bindings/spi/spi-gpio.yaml | 4 ++--
> .../devicetree/bindings/spi/spi-mux.yaml | 4 ++--
> .../devicetree/bindings/spi/spi-nxp-fspi.yaml | 2 +-
> .../devicetree/bindings/spi/spi-pl022.yaml | 18 +++++++++---------
> .../devicetree/bindings/spi/spi-rockchip.yaml | 2 +-
> .../devicetree/bindings/spi/spi-sifive.yaml | 6 +++---
> .../bindings/spi/spi-sunplus-sp7021.yaml | 2 +-
> .../devicetree/bindings/spi/spi-xilinx.yaml | 2 +-
> .../bindings/spi/spi-zynqmp-qspi.yaml | 2 +-
> .../devicetree/bindings/spi/sprd,spi-adi.yaml | 5 ++---
> .../devicetree/bindings/spi/st,stm32-qspi.yaml | 2 +-
> .../devicetree/bindings/spi/st,stm32-spi.yaml | 2 +-
> .../bindings/spi/xlnx,zynq-qspi.yaml | 2 +-
> 33 files changed, 53 insertions(+), 55 deletions(-)
>
<snip>
> diff --git a/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml b/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml
> index 53eb6562b979..e5eca3a6f132 100644
> --- a/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml
> +++ b/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml
> @@ -2,8 +2,8 @@
> # Copyright 2019 BayLibre, SAS
> %YAML 1.2
> ---
> -$id: "http://devicetree.org/schemas/spi/amlogic,meson-gx-spicc.yaml#"
> -$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> +$id: http://devicetree.org/schemas/spi/amlogic,meson-gx-spicc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>
> title: Amlogic Meson SPI Communication Controller
>
> @@ -41,7 +41,7 @@ properties:
> maxItems: 2
>
> allOf:
> - - $ref: "spi-controller.yaml#"
> + - $ref: spi-controller.yaml#
> - if:
> properties:
> compatible:
> diff --git a/Documentation/devicetree/bindings/spi/amlogic,meson6-spifc.yaml b/Documentation/devicetree/bindings/spi/amlogic,meson6-spifc.yaml
> index ac3b2ec300ac..806043fed4d1 100644
> --- a/Documentation/devicetree/bindings/spi/amlogic,meson6-spifc.yaml
> +++ b/Documentation/devicetree/bindings/spi/amlogic,meson6-spifc.yaml
> @@ -2,8 +2,8 @@
> # Copyright 2019 BayLibre, SAS
> %YAML 1.2
> ---
> -$id: "http://devicetree.org/schemas/spi/amlogic,meson6-spifc.yaml#"
> -$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> +$id: http://devicetree.org/schemas/spi/amlogic,meson6-spifc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>
> title: Amlogic Meson SPI Flash Controller
>
> @@ -11,7 +11,7 @@ maintainers:
> - Neil Armstrong <[email protected]>
>
> allOf:
> - - $ref: "spi-controller.yaml#"
> + - $ref: spi-controller.yaml#
>
> description: |
> The Meson SPIFC is a controller optimized for communication with SPI
<snip>
Hi Krzysztof
On 1/18/23 18:39, Krzysztof Kozlowski wrote:
> Cleanup by removing unneeded quotes from refs and redundant blank lines.
> No functional impact except adjusting to preferred coding style.
>
> Signed-off-by: Krzysztof Kozlowski <[email protected]>
> ---
[...]
> diff --git a/Documentation/devicetree/bindings/spi/st,stm32-qspi.yaml b/Documentation/devicetree/bindings/spi/st,stm32-qspi.yaml
> index 1eb17f7a4d86..8bba965a9ae6 100644
> --- a/Documentation/devicetree/bindings/spi/st,stm32-qspi.yaml
> +++ b/Documentation/devicetree/bindings/spi/st,stm32-qspi.yaml
> @@ -11,7 +11,7 @@ maintainers:
> - Patrice Chotard <[email protected]>
>
> allOf:
> - - $ref: "spi-controller.yaml#"
> + - $ref: spi-controller.yaml#
>
> properties:
> compatible:
For stm32-qspi
Reviewed-by: Patrice Chotard <[email protected]>
Thanks
Patrice
Am Mittwoch, 18. Januar 2023, 18:39:31 CET schrieb Krzysztof Kozlowski:
> Cleanup by removing unneeded quotes from refs and redundant blank lines.
> No functional impact except adjusting to preferred coding style.
>
> Signed-off-by: Krzysztof Kozlowski <[email protected]>
[...]
> diff --git a/Documentation/devicetree/bindings/spi/spi-rockchip.yaml b/Documentation/devicetree/bindings/spi/spi-rockchip.yaml
> index 66e49947b703..e4941e9212d1 100644
> --- a/Documentation/devicetree/bindings/spi/spi-rockchip.yaml
> +++ b/Documentation/devicetree/bindings/spi/spi-rockchip.yaml
> @@ -11,7 +11,7 @@ description:
> as flash and display controllers using the SPI communication interface.
>
> allOf:
> - - $ref: "spi-controller.yaml#"
> + - $ref: spi-controller.yaml#
>
> maintainers:
> - Heiko Stuebner <[email protected]>
For Rockchip:
Reviewed-by: Heiko Stuebner <[email protected]>
On Wed, Jan 18, 2023 at 06:39:31PM +0100, Krzysztof Kozlowski wrote:
> Cleanup by removing unneeded quotes from refs and redundant blank lines.
> No functional impact except adjusting to preferred coding style.
>
> Signed-off-by: Krzysztof Kozlowski <[email protected]>
> ---
[nip]
> .../bindings/spi/snps,dw-apb-ssi.yaml | 2 +-
[nip]
> diff --git a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml
> index d33b72fabc5d..a132b5fc56e0 100644
> --- a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml
> +++ b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml
> @@ -10,7 +10,7 @@ maintainers:
> - Mark Brown <[email protected]>
>
> allOf:
> - - $ref: "spi-controller.yaml#"
> + - $ref: spi-controller.yaml#
> - if:
> properties:
> compatible:
For the Synopsys DW SSI bindings:
Reviewed-by: Serge Semin <[email protected]>
Thanks
-Serge(y)
On Wed, 18 Jan 2023 18:39:31 +0100, Krzysztof Kozlowski wrote:
> Cleanup by removing unneeded quotes from refs and redundant blank lines.
> No functional impact except adjusting to preferred coding style.
>
> Signed-off-by: Krzysztof Kozlowski <[email protected]>
> ---
> .../bindings/spi/allwinner,sun4i-a10-spi.yaml | 2 +-
> .../bindings/spi/allwinner,sun6i-a31-spi.yaml | 2 +-
> .../bindings/spi/amlogic,meson-gx-spicc.yaml | 6 +++---
> .../bindings/spi/amlogic,meson6-spifc.yaml | 6 +++---
> .../bindings/spi/aspeed,ast2600-fmc.yaml | 2 +-
> .../devicetree/bindings/spi/cdns,qspi-nor.yaml | 2 +-
> .../devicetree/bindings/spi/cdns,xspi.yaml | 6 +++---
> .../bindings/spi/fsl,spi-fsl-qspi.yaml | 2 +-
> .../devicetree/bindings/spi/fsl-imx-cspi.yaml | 2 +-
> .../bindings/spi/mediatek,spi-mt65xx.yaml | 2 +-
> .../spi/mediatek,spi-slave-mt27xx.yaml | 2 +-
> .../bindings/spi/mikrotik,rb4xx-spi.yaml | 2 +-
> .../bindings/spi/mxicy,mx25f0a-spi.yaml | 2 +-
> .../devicetree/bindings/spi/mxs-spi.yaml | 2 +-
> .../bindings/spi/nvidia,tegra210-quad.yaml | 2 +-
> .../bindings/spi/qcom,spi-qcom-qspi.yaml | 5 ++---
> .../bindings/spi/realtek,rtl-spi.yaml | 2 +-
> .../bindings/spi/snps,dw-apb-ssi.yaml | 2 +-
> .../devicetree/bindings/spi/spi-cadence.yaml | 2 +-
> .../devicetree/bindings/spi/spi-fsl-lpspi.yaml | 2 +-
> .../devicetree/bindings/spi/spi-gpio.yaml | 4 ++--
> .../devicetree/bindings/spi/spi-mux.yaml | 4 ++--
> .../devicetree/bindings/spi/spi-nxp-fspi.yaml | 2 +-
> .../devicetree/bindings/spi/spi-pl022.yaml | 18 +++++++++---------
> .../devicetree/bindings/spi/spi-rockchip.yaml | 2 +-
> .../devicetree/bindings/spi/spi-sifive.yaml | 6 +++---
> .../bindings/spi/spi-sunplus-sp7021.yaml | 2 +-
> .../devicetree/bindings/spi/spi-xilinx.yaml | 2 +-
> .../bindings/spi/spi-zynqmp-qspi.yaml | 2 +-
> .../devicetree/bindings/spi/sprd,spi-adi.yaml | 5 ++---
> .../devicetree/bindings/spi/st,stm32-qspi.yaml | 2 +-
> .../devicetree/bindings/spi/st,stm32-spi.yaml | 2 +-
> .../bindings/spi/xlnx,zynq-qspi.yaml | 2 +-
> 33 files changed, 53 insertions(+), 55 deletions(-)
>
Acked-by: Rob Herring <[email protected]>
On Wed, Jan 18, 2023 at 06:39:32PM +0100, Krzysztof Kozlowski wrote:
> Cleanup examples:
> - use 4-space indentation (for cases when it is neither 4 not 2 space),
> - drop redundant blank lines,
> - use lowercase hex.
>
> No functional impact except adjusting to preferred coding style.
>
> Signed-off-by: Krzysztof Kozlowski <[email protected]>
> ---
> .../bindings/spi/amlogic,meson-gx-spicc.yaml | 26 +--
> .../bindings/spi/amlogic,meson6-spifc.yaml | 22 +--
> .../bindings/spi/aspeed,ast2600-fmc.yaml | 24 +--
> .../bindings/spi/brcm,spi-bcm-qspi.yaml | 156 +++++++++---------
> .../bindings/spi/cdns,qspi-nor.yaml | 4 +-
> .../bindings/spi/nvidia,tegra210-quad.yaml | 42 ++---
> .../bindings/spi/qcom,spi-qcom-qspi.yaml | 1 -
> .../devicetree/bindings/spi/renesas,rspi.yaml | 22 +--
> .../bindings/spi/spi-sunplus-sp7021.yaml | 4 +-
> .../devicetree/bindings/spi/st,stm32-spi.yaml | 1 -
> 10 files changed, 150 insertions(+), 152 deletions(-)
[...]
> diff --git a/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml b/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml
> index d35c6f7e2dd5..18afdaab946d 100644
> --- a/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml
> +++ b/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml
> @@ -95,7 +95,6 @@ examples:
> <&dmamux1 1 40 0x400 0x05>;
> dma-names = "rx", "tx";
> cs-gpios = <&gpioa 11 0>;
Looks like the indentation needs adjusting here.
> -
> };
>
> ...
> --
> 2.34.1
>
On 23/01/2023 21:17, Rob Herring wrote:
> On Wed, Jan 18, 2023 at 06:39:32PM +0100, Krzysztof Kozlowski wrote:
>> Cleanup examples:
>> - use 4-space indentation (for cases when it is neither 4 not 2 space),
>> - drop redundant blank lines,
>> - use lowercase hex.
>>
>> No functional impact except adjusting to preferred coding style.
>>
>> Signed-off-by: Krzysztof Kozlowski <[email protected]>
>> ---
>> .../bindings/spi/amlogic,meson-gx-spicc.yaml | 26 +--
>> .../bindings/spi/amlogic,meson6-spifc.yaml | 22 +--
>> .../bindings/spi/aspeed,ast2600-fmc.yaml | 24 +--
>> .../bindings/spi/brcm,spi-bcm-qspi.yaml | 156 +++++++++---------
>> .../bindings/spi/cdns,qspi-nor.yaml | 4 +-
>> .../bindings/spi/nvidia,tegra210-quad.yaml | 42 ++---
>> .../bindings/spi/qcom,spi-qcom-qspi.yaml | 1 -
>> .../devicetree/bindings/spi/renesas,rspi.yaml | 22 +--
>> .../bindings/spi/spi-sunplus-sp7021.yaml | 4 +-
>> .../devicetree/bindings/spi/st,stm32-spi.yaml | 1 -
>> 10 files changed, 150 insertions(+), 152 deletions(-)
>
> [...]
>
>> diff --git a/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml b/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml
>> index d35c6f7e2dd5..18afdaab946d 100644
>> --- a/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml
>> +++ b/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml
>> @@ -95,7 +95,6 @@ examples:
>> <&dmamux1 1 40 0x400 0x05>;
>> dma-names = "rx", "tx";
>> cs-gpios = <&gpioa 11 0>;
>
> Looks like the indentation needs adjusting here.
>
Ack
Best regards,
Krzysztof