Add missing error checks in mmd_phy_indirect(). The error checks need to
be disabled to retain the current behavior in phy_read_mmd() and
phy_write_mmd(). Therefore, add a new parameter to enable the error
checks. Add a thin wrapper __phy_mmd_indirect() which is then exported.
Signed-off-by: Michael Walle <[email protected]>
---
drivers/net/phy/phy-core.c | 44 +++++++++++++++++++++++++++++++-------
include/linux/phy.h | 2 ++
2 files changed, 38 insertions(+), 8 deletions(-)
diff --git a/drivers/net/phy/phy-core.c b/drivers/net/phy/phy-core.c
index a64186dc53f8..c9c92b95ace2 100644
--- a/drivers/net/phy/phy-core.c
+++ b/drivers/net/phy/phy-core.c
@@ -524,19 +524,47 @@ int phy_speed_down_core(struct phy_device *phydev)
return 0;
}
-static void mmd_phy_indirect(struct mii_bus *bus, int phy_addr, int devad,
- u16 regnum)
+static int mmd_phy_indirect(struct mii_bus *bus, int phy_addr, int devad,
+ u16 regnum, bool check_rc)
{
+ int ret;
+
/* Write the desired MMD Devad */
- __mdiobus_write(bus, phy_addr, MII_MMD_CTRL, devad);
+ ret = __mdiobus_write(bus, phy_addr, MII_MMD_CTRL, devad);
+ if (check_rc && ret)
+ return ret;
/* Write the desired MMD register address */
- __mdiobus_write(bus, phy_addr, MII_MMD_DATA, regnum);
+ ret = __mdiobus_write(bus, phy_addr, MII_MMD_DATA, regnum);
+ if (check_rc && ret)
+ return ret;
/* Select the Function : DATA with no post increment */
- __mdiobus_write(bus, phy_addr, MII_MMD_CTRL,
- devad | MII_MMD_CTRL_NOINCR);
+ ret = __mdiobus_write(bus, phy_addr, MII_MMD_CTRL,
+ devad | MII_MMD_CTRL_NOINCR);
+ if (check_rc && ret)
+ return ret;
+
+ return 0;
+}
+
+/**
+ * __phy_mmd_indirect - prepare an indirect C45 register access
+ *
+ * @bus: the target MII bus
+ * @phy_addr: PHY address on the MII bus
+ * @devad: The target MMD (0..31)
+ * @regnum: The target register on the MMD (0..65535)
+ *
+ * Prepare an indirect C45 read or write transfer using the MII_MMD_CTRL and
+ * MII_MMD_DATA registers in C22 space.
+ */
+int __phy_mmd_indirect(struct mii_bus *bus, int phy_addr, int devad,
+ u16 regnum)
+{
+ return mmd_phy_indirect(bus, phy_addr, devad, regnum, true);
}
+EXPORT_SYMBOL(__phy_mmd_indirect);
/**
* __phy_read_mmd - Convenience function for reading a register
@@ -563,7 +591,7 @@ int __phy_read_mmd(struct phy_device *phydev, int devad, u32 regnum)
struct mii_bus *bus = phydev->mdio.bus;
int phy_addr = phydev->mdio.addr;
- mmd_phy_indirect(bus, phy_addr, devad, regnum);
+ mmd_phy_indirect(bus, phy_addr, devad, regnum, false);
/* Read the content of the MMD's selected register */
val = __mdiobus_read(bus, phy_addr, MII_MMD_DATA);
@@ -619,7 +647,7 @@ int __phy_write_mmd(struct phy_device *phydev, int devad, u32 regnum, u16 val)
struct mii_bus *bus = phydev->mdio.bus;
int phy_addr = phydev->mdio.addr;
- mmd_phy_indirect(bus, phy_addr, devad, regnum);
+ mmd_phy_indirect(bus, phy_addr, devad, regnum, false);
/* Write the data into MMD's selected register */
__mdiobus_write(bus, phy_addr, MII_MMD_DATA, val);
diff --git a/include/linux/phy.h b/include/linux/phy.h
index fbeba4fee8d4..f7a5e110f95c 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -1228,6 +1228,8 @@ int phy_read_mmd(struct phy_device *phydev, int devad, u32 regnum);
__ret; \
})
+int __phy_mmd_indirect(struct mii_bus *bus, int phy_addr, int devad,
+ u16 regnum);
/*
* __phy_read_mmd - Convenience function for reading a register
* from an MMD on a given PHY.
--
2.30.2
On Fri, Jan 20, 2023 at 11:40:07PM +0100, Michael Walle wrote:
> Add missing error checks in mmd_phy_indirect(). The error checks need to
> be disabled to retain the current behavior in phy_read_mmd() and
> phy_write_mmd(). Therefore, add a new parameter to enable the error
> checks. Add a thin wrapper __phy_mmd_indirect() which is then exported.
Do we need to retain the current behavior? Is there a good reason to
silently ignore errors? If there is, it would be good to state it here
in the commit message.
Andrew