EDAC PCI control is used to detect/report legacy PCI errors like
"Parity" and "SERROR". Modern AMD systems use PCIe Advanced Error
Reporting (AER), and legacy PCI errors should not be reported.
Remove EDAC PCI control setup on AMD Family 17h and later systems.
Signed-off-by: Yazen Ghannam <[email protected]>
---
Link:
https://lore.kernel.org/r/[email protected]
v1->v2:
* No change
drivers/edac/amd64_edac.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c
index e3318e5575a3..2cc7336a5121 100644
--- a/drivers/edac/amd64_edac.c
+++ b/drivers/edac/amd64_edac.c
@@ -4370,12 +4370,12 @@ static int __init amd64_edac_init(void)
}
/* register stuff with EDAC MCE */
- if (boot_cpu_data.x86 >= 0x17)
+ if (boot_cpu_data.x86 >= 0x17) {
amd_register_ecc_decoder(decode_umc_error);
- else
+ } else {
amd_register_ecc_decoder(decode_bus_error);
-
- setup_pci_device();
+ setup_pci_device();
+ }
#ifdef CONFIG_X86_32
amd64_err("%s on 32-bit is unsupported. USE AT YOUR OWN RISK!\n", EDAC_MOD_STR);
--
2.25.1