2023-01-31 13:27:24

by Shenghao Ding

[permalink] [raw]
Subject: [PATCH v5] ASoC: dt-bindings: Add tas2781 amplifier.

Create tas2781.yaml for tas2781 driver.

Signed-off-by: Shenghao Ding <[email protected]>

---
Changes to be committed:
new file: Documentation/devicetree/bindings/sound/ti,tas2781.yaml
---
.../devicetree/bindings/sound/ti,tas2781.yaml | 87 +++++++++++++++++++
1 file changed, 87 insertions(+)
create mode 100644 Documentation/devicetree/bindings/sound/ti,tas2781.yaml

diff --git a/Documentation/devicetree/bindings/sound/ti,tas2781.yaml b/Documentation/devicetree/bindings/sound/ti,tas2781.yaml
new file mode 100644
index 000000000..9a440d29f
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/ti,tas2781.yaml
@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2022 - 2023 Texas Instruments Incorporated
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/ti,tas2781.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments TAS2781 SmartAMP
+
+maintainers:
+ - Shenghao Ding <[email protected]>
+ - Kevin Lu <[email protected]>
+
+description: |
+ The TAS2781 is a mono, digital input Class-D audio amplifier
+ optimized for efficiently driving high peak power into small
+ loudspeakers. Integrated an on-chip DSP supports Texas Instruments
+ Smart Amp speaker protection algorithm. The integrated speaker
+ voltage and current sense provides for real time
+ monitoring of loudspeaker behavior.
+
+properties:
+ compatible:
+ enum:
+ - ti,tas2781
+
+ reg:
+ maxItems: 1
+ description: |
+ I2C address of the device can be in range from 0x38 to 0x40.
+
+ reset-gpios:
+ maxItems: 1
+ description: |
+ A GPIO line handling reset of the chip. As the line is active high,
+ it should be marked GPIO_ACTIVE_HIGH (see ../gpio/gpio.txt)
+
+ interrupts:
+ maxItems: 1
+
+ ti,audio-slots:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 1
+ maxItems: 4
+ description: |
+ I2c address of the device for different audio slots,
+ useless in mono case.
+
+ ti,broadcast-addr:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Generic i2c address for all the tas2781 devices in
+ purpose of I2C broadcast during the multi-device
+ writes, useless in mono case.
+
+ '#sound-dai-cells':
+ const: 1
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ i2c {
+ /* example with quad support, such as tablet or pad device */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ quad: codec@38 {
+ compatible = "ti,tas2781";
+ reg = <0x38>;
+ #sound-dai-cells = <1>;
+ reset-gpios = < &gpio1 10 GPIO_ACTIVE_HIGH >;
+ interrupt-parent = <&gpio1>;
+ interrupts = <15>;
+ ti,audio-slots = < 0x38 /* topleft-channel */
+ 0x39 /* topright-channel */
+ 0x3a /* bottomleft-channel */
+ 0x3b /* bottomright-channel */
+ >;
+ ti,broadcast-addr = <0x40>;
+ };
+ };
+...
--
2.34.1




2023-01-31 17:59:52

by Krzysztof Kozlowski

[permalink] [raw]
Subject: Re: [PATCH v5] ASoC: dt-bindings: Add tas2781 amplifier.

On 31/01/2023 14:17, Shenghao Ding wrote:
> Create tas2781.yaml for tas2781 driver.

You treat my feedback selectively... some things improved, but not
everything. I am literally repeating the same and expect different
results from you... isn't that the definition of insanity?

Let me paste ignored parts:

1. Your patches are still not correctly threaded. There is no threading
at all.

I said it multiple times. What else should I say here?

2. Subject: ASoC: dt-bindings: Add tas2781 amplifier
(drop the full stop - why did you add it there?)

3. Missing changelog under ---.
I mentioned it already few times, didn't I?

>
> Signed-off-by: Shenghao Ding <[email protected]>
>
> ---
> Changes to be committed:
> new file: Documentation/devicetree/bindings/sound/ti,tas2781.yaml
> ---
> .../devicetree/bindings/sound/ti,tas2781.yaml | 87 +++++++++++++++++++
> 1 file changed, 87 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/sound/ti,tas2781.yaml
>
> diff --git a/Documentation/devicetree/bindings/sound/ti,tas2781.yaml b/Documentation/devicetree/bindings/sound/ti,tas2781.yaml
> new file mode 100644
> index 000000000..9a440d29f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/ti,tas2781.yaml
> @@ -0,0 +1,87 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +# Copyright (C) 2022 - 2023 Texas Instruments Incorporated
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/sound/ti,tas2781.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Texas Instruments TAS2781 SmartAMP
> +
> +maintainers:
> + - Shenghao Ding <[email protected]>
> + - Kevin Lu <[email protected]>
> +
> +description: |
> + The TAS2781 is a mono, digital input Class-D audio amplifier
> + optimized for efficiently driving high peak power into small
> + loudspeakers. Integrated an on-chip DSP supports Texas Instruments
> + Smart Amp speaker protection algorithm. The integrated speaker
> + voltage and current sense provides for real time
> + monitoring of loudspeaker behavior.
> +
> +properties:
> + compatible:
> + enum:
> + - ti,tas2781
> +
> + reg:
> + maxItems: 1
> + description: |
> + I2C address of the device can be in range from 0x38 to 0x40.
> +
> + reset-gpios:
> + maxItems: 1
> + description: |
> + A GPIO line handling reset of the chip. As the line is active high,
> + it should be marked GPIO_ACTIVE_HIGH (see ../gpio/gpio.txt)

Drop the reference to gpio.txt.

I give up. I spent too much time on it while being also ignored a bit
too much.


Best regards,
Krzysztof