The logic of the duplex bit is inverted. Setting it means half
duplex, not full duplex.
Fix and rename macro to avoid confusion.
Fixes: 7e538372694b ("net: ethernet: mediatek: Re-add support SGMII")
Reviewed-by: Russell King (Oracle) <[email protected]>
Signed-off-by: Bjørn Mork <[email protected]>
---
drivers/net/ethernet/mediatek/mtk_eth_soc.h | 2 +-
drivers/net/ethernet/mediatek/mtk_sgmii.c | 6 +++---
2 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.h b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
index 01a38f5145b1..2d9186d32bc0 100644
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
@@ -519,7 +519,7 @@
#define SGMII_SPEED_10 FIELD_PREP(SGMII_SPEED_MASK, 0)
#define SGMII_SPEED_100 FIELD_PREP(SGMII_SPEED_MASK, 1)
#define SGMII_SPEED_1000 FIELD_PREP(SGMII_SPEED_MASK, 2)
-#define SGMII_DUPLEX_FULL BIT(4)
+#define SGMII_DUPLEX_HALF BIT(4)
#define SGMII_IF_MODE_BIT5 BIT(5)
#define SGMII_REMOTE_FAULT_DIS BIT(8)
#define SGMII_CODE_SYNC_SET_VAL BIT(9)
diff --git a/drivers/net/ethernet/mediatek/mtk_sgmii.c b/drivers/net/ethernet/mediatek/mtk_sgmii.c
index 0a06995099cf..c4261069b521 100644
--- a/drivers/net/ethernet/mediatek/mtk_sgmii.c
+++ b/drivers/net/ethernet/mediatek/mtk_sgmii.c
@@ -154,11 +154,11 @@ static void mtk_pcs_link_up(struct phylink_pcs *pcs, unsigned int mode,
else
sgm_mode = SGMII_SPEED_1000;
- if (duplex == DUPLEX_FULL)
- sgm_mode |= SGMII_DUPLEX_FULL;
+ if (duplex != DUPLEX_FULL)
+ sgm_mode |= SGMII_DUPLEX_HALF;
regmap_update_bits(mpcs->regmap, SGMSYS_SGMII_MODE,
- SGMII_DUPLEX_FULL | SGMII_SPEED_MASK,
+ SGMII_DUPLEX_HALF | SGMII_SPEED_MASK,
sgm_mode);
}
}
--
2.30.2