2023-02-04 21:44:13

by Arınç ÜNAL

Subject: [PATCH] mips: ralink: make SOC_MT7621 select PINCTRL_MT7621 and fix help section

From: Arınç ÜNAL <[email protected]>

The dt-binding of the MT7621 SoC uses the pinctrl driver. Therefore, have
this driver selected by default.

The help section for SOC_MT7621 exceeds 80 columns which is the preferred
limit of a single line. A tab character is 8 columns. Rearrange the text
accordingly.

Signed-off-by: Arınç ÜNAL <[email protected]>
---
arch/mips/ralink/Kconfig | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/arch/mips/ralink/Kconfig b/arch/mips/ralink/Kconfig
index f9fe15630abb..06031796c87b 100644
--- a/arch/mips/ralink/Kconfig
+++ b/arch/mips/ralink/Kconfig
@@ -54,10 +54,11 @@ choice
select HAVE_PCI
select PCI_DRIVERS_GENERIC
select SOC_BUS
+ select PINCTRL_MT7621

help
- The MT7621 system-on-a-chip includes an 880 MHz MIPS1004Kc dual-core CPU,
- a 5-port 10/100/1000 switch/PHY and one RGMII.
+ The MT7621 system-on-a-chip includes an 880 MHz MIPS1004Kc
+ dual-core CPU, a 5-port 10/100/1000 switch/PHY and one RGMII.
endchoice

choice
--
2.37.2

2023-02-05 16:19:51

by Thomas Bogendoerfer

Subject: Re: [PATCH] mips: ralink: make SOC_MT7621 select PINCTRL_MT7621 and fix help section

On Sun, Feb 05, 2023 at 12:42:49AM +0300, [email protected] wrote:
> From: Arınç ÜNAL <[email protected]>
>
> The dt-binding of the MT7621 SoC uses the pinctrl driver. Therefore, have
> this driver selected by default.
>
> The help section for SOC_MT7621 exceeds 80 columns which is the preferred
> limit of a single line. A tab character is 8 columns. Rearrange the text
> accordingly.
>
> Signed-off-by: Arınç ÜNAL <[email protected]>
> ---
> arch/mips/ralink/Kconfig | 5 +++--
> 1 file changed, 3 insertions(+), 2 deletions(-)
>
> diff --git a/arch/mips/ralink/Kconfig b/arch/mips/ralink/Kconfig
> index f9fe15630abb..06031796c87b 100644
> --- a/arch/mips/ralink/Kconfig
> +++ b/arch/mips/ralink/Kconfig
> @@ -54,10 +54,11 @@ choice
> select HAVE_PCI
> select PCI_DRIVERS_GENERIC
> select SOC_BUS
> + select PINCTRL_MT7621
>
> help
> - The MT7621 system-on-a-chip includes an 880 MHz MIPS1004Kc dual-core CPU,
> - a 5-port 10/100/1000 switch/PHY and one RGMII.
> + The MT7621 system-on-a-chip includes an 880 MHz MIPS1004Kc
> + dual-core CPU, a 5-port 10/100/1000 switch/PHY and one RGMII.
> endchoice
>
> choice
> --
> 2.37.2

applied to mips-next.

Thomas.

--
Crap can work. Given enough thrust pigs will fly, but it's not necessarily a
good idea. [ RFC1925, 2.3 ]