Add the support for RTL8852BS BT controller on UART interface.
The necessary firmware file will be submitted to linux-firmware.
Signed-off-by: Victor Hassan <[email protected]>
---
drivers/bluetooth/btrtl.c | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/drivers/bluetooth/btrtl.c b/drivers/bluetooth/btrtl.c
index 69c3fe649ca7..aee75f278e60 100644
--- a/drivers/bluetooth/btrtl.c
+++ b/drivers/bluetooth/btrtl.c
@@ -190,6 +190,14 @@ static const struct id_table ic_id_table[] = {
.fw_name = "rtl_bt/rtl8852au_fw.bin",
.cfg_name = "rtl_bt/rtl8852au_config" },
+ /* 8852B with UART interface */
+ { IC_INFO(RTL_ROM_LMP_8852A, 0xb, 0xb, HCI_UART),
+ .config_needed = true,
+ .has_rom_version = true,
+ .has_msft_ext = true,
+ .fw_name = "rtl_bt/rtl8852bs_fw.bin",
+ .cfg_name = "rtl_bt/rtl8852bs_config" },
+
/* 8852B */
{ IC_INFO(RTL_ROM_LMP_8852A, 0xb, 0xb, HCI_USB),
.config_needed = false,
@@ -963,6 +971,8 @@ MODULE_FIRMWARE("rtl_bt/rtl8822b_fw.bin");
MODULE_FIRMWARE("rtl_bt/rtl8822b_config.bin");
MODULE_FIRMWARE("rtl_bt/rtl8852au_fw.bin");
MODULE_FIRMWARE("rtl_bt/rtl8852au_config.bin");
+MODULE_FIRMWARE("rtl_bt/rtl8852bs_fw.bin");
+MODULE_FIRMWARE("rtl_bt/rtl8852bs_config.bin");
MODULE_FIRMWARE("rtl_bt/rtl8852bu_fw.bin");
MODULE_FIRMWARE("rtl_bt/rtl8852bu_config.bin");
MODULE_FIRMWARE("rtl_bt/rtl8852cu_fw.bin");
--
2.29.0