From: Richard van Schagen <[email protected]>
Add support for changing the master of a port on the MT7530 DSA subdriver.
[ [email protected]: Wrote subject and changelog ]
Tested-by: Arınç ÜNAL <[email protected]>
Signed-off-by: Richard van Schagen <[email protected]>
Signed-off-by: Arınç ÜNAL <[email protected]>
---
drivers/net/dsa/mt7530.c | 33 +++++++++++++++++++++++++++++++++
1 file changed, 33 insertions(+)
diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index b5ad4b4fc00c..04bb4986454e 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -1072,6 +1072,38 @@ mt7530_port_disable(struct dsa_switch *ds, int port)
mutex_unlock(&priv->reg_mutex);
}
+static int
+mt7530_port_change_master(struct dsa_switch *ds, int port,
+ struct net_device *master,
+ struct netlink_ext_ack *extack)
+{
+ struct mt7530_priv *priv = ds->priv;
+ struct dsa_port *dp = dsa_to_port(ds, port);
+ struct dsa_port *cpu_dp = master->dsa_ptr;
+ int old_cpu = dp->cpu_dp->index;
+ int new_cpu = cpu_dp->index;
+
+ mutex_lock(&priv->reg_mutex);
+
+ /* Move old to new cpu on User port */
+ priv->ports[port].pm &= ~PCR_MATRIX(BIT(old_cpu));
+ priv->ports[port].pm |= PCR_MATRIX(BIT(new_cpu));
+
+ mt7530_rmw(priv, MT7530_PCR_P(port), PCR_MATRIX_MASK,
+ priv->ports[port].pm);
+
+ /* Move user port from old cpu to new cpu */
+ priv->ports[old_cpu].pm &= ~PCR_MATRIX(BIT(port));
+ priv->ports[new_cpu].pm |= PCR_MATRIX(BIT(port));
+
+ mt7530_write(priv, MT7530_PCR_P(old_cpu), priv->ports[old_cpu].pm);
+ mt7530_write(priv, MT7530_PCR_P(new_cpu), priv->ports[new_cpu].pm);
+
+ mutex_unlock(&priv->reg_mutex);
+
+ return 0;
+}
+
static int
mt7530_port_change_mtu(struct dsa_switch *ds, int port, int new_mtu)
{
@@ -3157,6 +3189,7 @@ static const struct dsa_switch_ops mt7530_switch_ops = {
.set_ageing_time = mt7530_set_ageing_time,
.port_enable = mt7530_port_enable,
.port_disable = mt7530_port_disable,
+ .port_change_master = mt7530_port_change_master,
.port_change_mtu = mt7530_port_change_mtu,
.port_max_mtu = mt7530_port_max_mtu,
.port_stp_state_set = mt7530_stp_state_set,
--
2.37.2
On Fri, Feb 10, 2023 at 08:29:43PM +0300, [email protected] wrote:
> From: Richard van Schagen <[email protected]>
>
> Add support for changing the master of a port on the MT7530 DSA subdriver.
>
> [ [email protected]: Wrote subject and changelog ]
>
> Tested-by: Arınç ÜNAL <[email protected]>
> Signed-off-by: Richard van Schagen <[email protected]>
> Signed-off-by: Arınç ÜNAL <[email protected]>
> ---
> drivers/net/dsa/mt7530.c | 33 +++++++++++++++++++++++++++++++++
> 1 file changed, 33 insertions(+)
>
> diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
> index b5ad4b4fc00c..04bb4986454e 100644
> --- a/drivers/net/dsa/mt7530.c
> +++ b/drivers/net/dsa/mt7530.c
> @@ -1072,6 +1072,38 @@ mt7530_port_disable(struct dsa_switch *ds, int port)
> mutex_unlock(&priv->reg_mutex);
> }
>
> +static int
> +mt7530_port_change_master(struct dsa_switch *ds, int port,
> + struct net_device *master,
> + struct netlink_ext_ack *extack)
alignment
> +{
> + struct mt7530_priv *priv = ds->priv;
> + struct dsa_port *dp = dsa_to_port(ds, port);
> + struct dsa_port *cpu_dp = master->dsa_ptr;
> + int old_cpu = dp->cpu_dp->index;
> + int new_cpu = cpu_dp->index;
I believe you need to reject LAG DSA masters.
> +
> + mutex_lock(&priv->reg_mutex);
> +
> + /* Move old to new cpu on User port */
> + priv->ports[port].pm &= ~PCR_MATRIX(BIT(old_cpu));
> + priv->ports[port].pm |= PCR_MATRIX(BIT(new_cpu));
> +
> + mt7530_rmw(priv, MT7530_PCR_P(port), PCR_MATRIX_MASK,
> + priv->ports[port].pm);
> +
> + /* Move user port from old cpu to new cpu */
> + priv->ports[old_cpu].pm &= ~PCR_MATRIX(BIT(port));
> + priv->ports[new_cpu].pm |= PCR_MATRIX(BIT(port));
> +
> + mt7530_write(priv, MT7530_PCR_P(old_cpu), priv->ports[old_cpu].pm);
> + mt7530_write(priv, MT7530_PCR_P(new_cpu), priv->ports[new_cpu].pm);
- who writes to the "pm" field of CPU ports?
- how does this line up with your other patch which said (AFAIU) that
the port matrix of CPU ports should be 0 and that should be fine?
- read/modify/write (rmw) using PCR_MATRIX_MASK rather than mt7530_write().
That overwrites the other PCR fields.
> +
> + mutex_unlock(&priv->reg_mutex);
> +
> + return 0;
> +}
> +
> static int
> mt7530_port_change_mtu(struct dsa_switch *ds, int port, int new_mtu)
> {
> @@ -3157,6 +3189,7 @@ static const struct dsa_switch_ops mt7530_switch_ops = {
> .set_ageing_time = mt7530_set_ageing_time,
> .port_enable = mt7530_port_enable,
> .port_disable = mt7530_port_disable,
> + .port_change_master = mt7530_port_change_master,
> .port_change_mtu = mt7530_port_change_mtu,
> .port_max_mtu = mt7530_port_max_mtu,
> .port_stp_state_set = mt7530_stp_state_set,
> --
> 2.37.2
>
> On 10 Feb 2023, at 19:56, Vladimir Oltean <[email protected]> wrote:
>
> On Fri, Feb 10, 2023 at 08:29:43PM +0300, [email protected] wrote:
>> From: Richard van Schagen <[email protected]>
>>
>> Add support for changing the master of a port on the MT7530 DSA subdriver.
>>
>> [ [email protected]: Wrote subject and changelog ]
>>
>> Tested-by: Arınç ÜNAL <[email protected]>
>> Signed-off-by: Richard van Schagen <[email protected]>
>> Signed-off-by: Arınç ÜNAL <[email protected]>
>> ---
>> drivers/net/dsa/mt7530.c | 33 +++++++++++++++++++++++++++++++++
>> 1 file changed, 33 insertions(+)
>>
>> diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
>> index b5ad4b4fc00c..04bb4986454e 100644
>> --- a/drivers/net/dsa/mt7530.c
>> +++ b/drivers/net/dsa/mt7530.c
>> @@ -1072,6 +1072,38 @@ mt7530_port_disable(struct dsa_switch *ds, int port)
>> mutex_unlock(&priv->reg_mutex);
>> }
>>
>> +static int
>> +mt7530_port_change_master(struct dsa_switch *ds, int port,
>> + struct net_device *master,
>> + struct netlink_ext_ack *extack)
>
> alignment
>
Will fix
>> +{
>> + struct mt7530_priv *priv = ds->priv;
>> + struct dsa_port *dp = dsa_to_port(ds, port);
>> + struct dsa_port *cpu_dp = master->dsa_ptr;
>> + int old_cpu = dp->cpu_dp->index;
>> + int new_cpu = cpu_dp->index;
>
> I believe you need to reject LAG DSA masters.
>
Not sure what you mean: how is this different from the change_master in the Felix driver when using 8021q tags?
But. Can add a check if you prefer. It might be a good idea anyway to be future proof. The MT7531 has support for LAG in hw.
>> +
>> + mutex_lock(&priv->reg_mutex);
>> +
>> + /* Move old to new cpu on User port */
>> + priv->ports[port].pm &= ~PCR_MATRIX(BIT(old_cpu));
>> + priv->ports[port].pm |= PCR_MATRIX(BIT(new_cpu));
>> +
>> + mt7530_rmw(priv, MT7530_PCR_P(port), PCR_MATRIX_MASK,
>> + priv->ports[port].pm);
>> +
>> + /* Move user port from old cpu to new cpu */
>> + priv->ports[old_cpu].pm &= ~PCR_MATRIX(BIT(port));
>> + priv->ports[new_cpu].pm |= PCR_MATRIX(BIT(port));
>> +
>> + mt7530_write(priv, MT7530_PCR_P(old_cpu), priv->ports[old_cpu].pm);
>> + mt7530_write(priv, MT7530_PCR_P(new_cpu), priv->ports[new_cpu].pm);
>
> - who writes to the "pm" field of CPU ports?
Nobody actually writes to cpu.pm. I “fixed” that, and dropped that later. This is left over.
> - how does this line up with your other patch which said (AFAIU) that
> the port matrix of CPU ports should be 0 and that should be fine?
Since cpu.pm was never user, and all user ports were added without using this field when enabling
the cpu, I changed that to add user ports belonging to that CPU. Arinc reported that it didn’t work.
Since the cpu.pm (empty) is writing during dsa_enable_port and that worked (for a long time already) the cpu.pm can be dropped.
> - read/modify/write (rmw) using PCR_MATRIX_MASK rather than mt7530_write().
> That overwrites the other PCR fields.
>
Good catch. Will fix.
>> +
>> + mutex_unlock(&priv->reg_mutex);
>> +
>> + return 0;
>> +}
>> +
>> static int
>> mt7530_port_change_mtu(struct dsa_switch *ds, int port, int new_mtu)
>> {
>> @@ -3157,6 +3189,7 @@ static const struct dsa_switch_ops mt7530_switch_ops = {
>> .set_ageing_time = mt7530_set_ageing_time,
>> .port_enable = mt7530_port_enable,
>> .port_disable = mt7530_port_disable,
>> + .port_change_master = mt7530_port_change_master,
>> .port_change_mtu = mt7530_port_change_mtu,
>> .port_max_mtu = mt7530_port_max_mtu,
>> .port_stp_state_set = mt7530_stp_state_set,
>> --
>> 2.37.2
On Fri, Feb 10, 2023 at 09:41:06PM +0000, Richard van Schagen wrote:
> > I believe you need to reject LAG DSA masters.
>
> Not sure what you mean: how is this different from the change_master in the Felix driver when using 8021q tags?
> But. Can add a check if you prefer. It might be a good idea anyway to be future proof. The MT7531 has support for LAG in hw.
I mean, like Documentation/networking/dsa/configuration.rst says, that the user can attempt
to put the DSA masters in a LAG and create a larger DSA master which is that bonding device.
The difference from the Felix driver is that Felix supports LAG DSA masters and this driver doesn't.
I don't believe there is any other restriction in the code which would prevent a driver which
implements port_change_master() from accepting that as a valid configuration, so it's going to
be the mt7530 driver who acts as the final frontier in this case.
An "if (netif_is_lag_master(master)) return -EOPNOTSUPP" will do. But it would always be good
to check if it's really needed :)