Novatek NT36523 is a display driver IC used to drive DSI panels.
Signed-off-by: Jianhua Lu <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
---
Changes in v3:
- pick up Krzysztof's R-b
Changes in v2:
- Drop unnecessary description
- dsi0 -> dsi
- Correct indentation
.../display/panel/novatek,nt36523.yaml | 85 +++++++++++++++++++
1 file changed, 85 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/panel/novatek,nt36523.yaml
diff --git a/Documentation/devicetree/bindings/display/panel/novatek,nt36523.yaml b/Documentation/devicetree/bindings/display/panel/novatek,nt36523.yaml
new file mode 100644
index 000000000000..0039561ef04c
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/novatek,nt36523.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/novatek,nt36523.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Novatek NT36523 based DSI display Panels
+
+maintainers:
+ - Jianhua Lu <[email protected]>
+
+description: |
+ The Novatek NT36523 is a generic DSI Panel IC used to drive dsi
+ panels. Support video mode panels from China Star Optoelectronics
+ Technology (CSOT) and BOE Technology.
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - xiaomi,elish-boe-nt36523
+ - xiaomi,elish-csot-nt36523
+ - const: novatek,nt36523
+
+ reset-gpios:
+ maxItems: 1
+ description: phandle of gpio for reset line - This should be 8mA
+
+ vddio-supply:
+ description: regulator that supplies the I/O voltage
+
+ reg: true
+ ports: true
+ backlight: true
+
+required:
+ - compatible
+ - reg
+ - vddio-supply
+ - reset-gpios
+ - ports
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ panel@0 {
+ compatible = "xiaomi,elish-csot-nt36523", "novatek,nt36523";
+ reg = <0>;
+
+ vddio-supply = <&vreg_l14a_1p88>;
+ reset-gpios = <&tlmm 75 GPIO_ACTIVE_LOW>;
+ backlight = <&backlight>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ panel_in_0: endpoint {
+ remote-endpoint = <&dsi0_out>;
+ };
+ };
+
+ port@1{
+ reg = <1>;
+ panel_in_1: endpoint {
+ remote-endpoint = <&dsi1_out>;
+ };
+ };
+ };
+ };
+ };
+
+...
--
2.39.2
Add a driver for panels using the Novatek NT36523 display driver IC.
Signed-off-by: Jianhua Lu <[email protected]>
---
Changes in v3:
- Refactor source code
Changes in v2:
- Refactor and clean up source code
MAINTAINERS | 7 +
drivers/gpu/drm/panel/Kconfig | 10 +
drivers/gpu/drm/panel/Makefile | 1 +
drivers/gpu/drm/panel/panel-novatek-nt36523.c | 770 ++++++++++++++++++
4 files changed, 788 insertions(+)
create mode 100644 drivers/gpu/drm/panel/panel-novatek-nt36523.c
diff --git a/MAINTAINERS b/MAINTAINERS
index 5383af5d3b45..3586248bb05d 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -6537,6 +6537,13 @@ T: git git://anongit.freedesktop.org/drm/drm-misc
F: Documentation/devicetree/bindings/display/panel/sony,acx424akp.yaml
F: drivers/gpu/drm/panel/panel-novatek-nt35560.c
+DRM DRIVER FOR NOVATEK NT36523 PANELS
+M: Jianhua Lu <[email protected]>
+S: Maintained
+T: git git://anongit.freedesktop.org/drm/drm-misc
+F: Documentation/devicetree/bindings/display/panel/novatek,nt36523.yaml
+F: drivers/gpu/drm/panel/panel-novatek-nt36523.c
+
DRM DRIVER FOR NOVATEK NT36672A PANELS
M: Sumit Semwal <[email protected]>
S: Maintained
diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
index 8eeee71c0000..268508743b5c 100644
--- a/drivers/gpu/drm/panel/Kconfig
+++ b/drivers/gpu/drm/panel/Kconfig
@@ -377,6 +377,16 @@ config DRM_PANEL_NOVATEK_NT35950
Sharp panels used in Sony Xperia Z5 Premium and XZ Premium
mobile phones.
+config DRM_PANEL_NOVATEK_NT36523
+ tristate "Novatek NT36523 panel driver"
+ depends on OF
+ depends on DRM_MIPI_DSI
+ depends on BACKLIGHT_CLASS_DEVICE
+ help
+ Say Y here if you want to enable support for the panels built
+ around the Novatek NT36523 display controller, such as some
+ Boe panels used in Xiaomi Mi Pad 5 and 5 Pro tablets.
+
config DRM_PANEL_NOVATEK_NT36672A
tristate "Novatek NT36672A DSI panel"
depends on OF
diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
index c05aa9e23907..570eab8bf2b2 100644
--- a/drivers/gpu/drm/panel/Makefile
+++ b/drivers/gpu/drm/panel/Makefile
@@ -35,6 +35,7 @@ obj-$(CONFIG_DRM_PANEL_NEWVISION_NV3052C) += panel-newvision-nv3052c.o
obj-$(CONFIG_DRM_PANEL_NOVATEK_NT35510) += panel-novatek-nt35510.o
obj-$(CONFIG_DRM_PANEL_NOVATEK_NT35560) += panel-novatek-nt35560.o
obj-$(CONFIG_DRM_PANEL_NOVATEK_NT35950) += panel-novatek-nt35950.o
+obj-$(CONFIG_DRM_PANEL_NOVATEK_NT36523) += panel-novatek-nt36523.o
obj-$(CONFIG_DRM_PANEL_NOVATEK_NT36672A) += panel-novatek-nt36672a.o
obj-$(CONFIG_DRM_PANEL_NOVATEK_NT39016) += panel-novatek-nt39016.o
obj-$(CONFIG_DRM_PANEL_MANTIX_MLAF057WE51) += panel-mantix-mlaf057we51.o
diff --git a/drivers/gpu/drm/panel/panel-novatek-nt36523.c b/drivers/gpu/drm/panel/panel-novatek-nt36523.c
new file mode 100644
index 000000000000..0df41ef9690c
--- /dev/null
+++ b/drivers/gpu/drm/panel/panel-novatek-nt36523.c
@@ -0,0 +1,770 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Novatek NT36523 DriverIC panels driver
+ *
+ * Copyright (c) 2022, 2023 Jianhua Lu <[email protected]>
+ */
+
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/of_graph.h>
+#include <linux/regulator/consumer.h>
+
+#include <drm/drm_connector.h>
+#include <drm/drm_crtc.h>
+#include <drm/drm_mipi_dsi.h>
+#include <drm/drm_modes.h>
+#include <drm/drm_panel.h>
+
+#define DSI_NUM_MIN 1
+
+/* Macro modified from mipi_dual_dsi_dcs_write_seq */
+#define mipi_dual_dsi_dcs_write_seq(dsi, cmd, seq...) \
+ do { \
+ static const u8 d[] = { cmd, seq }; \
+ int i, ret; \
+ for (i = 0; i < ARRAY_SIZE(dsi); i++) { \
+ ret = mipi_dsi_dcs_write_buffer(dsi[i], d, ARRAY_SIZE(d)); \
+ if (ret < 0) { \
+ dev_err_ratelimited( \
+ &dsi[i]->dev, "sending command %#02x failed: %d\n", \
+ cmd, ret); \
+ return ret; \
+ } \
+ } \
+ } while (0)
+
+struct panel_info {
+ struct drm_panel panel;
+ struct mipi_dsi_device *dsi[2];
+ const struct panel_desc *desc;
+
+ struct gpio_desc *reset_gpio;
+ struct backlight_device *backlight;
+ struct regulator *vddio;
+
+ bool prepared;
+};
+
+struct panel_desc {
+ unsigned int width_mm;
+ unsigned int height_mm;
+
+ unsigned int bpc;
+ unsigned int lanes;
+ unsigned long mode_flags;
+ enum mipi_dsi_pixel_format format;
+
+ const struct drm_display_mode *modes;
+ const struct mipi_dsi_device_info dsi_info;
+ int (*init_sequence)(struct panel_info *pinfo);
+
+ bool is_dual_dsi;
+};
+
+static inline struct panel_info *to_panel_info(struct drm_panel *panel)
+{
+ return container_of(panel, struct panel_info, panel);
+}
+
+static int elish_boe_init_sequence(struct panel_info *pinfo)
+{
+ /* No datasheet */
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xFF, 0x10);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xFB, 0x01);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xB9, 0x05);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xFF, 0x20);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xFB, 0x01);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x18, 0x40);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xFF, 0x10);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xFB, 0x01);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xB9, 0x02);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xFF, 0x23);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xFB, 0x01);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x00, 0x80);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x01, 0x84);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x05, 0x2D);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x06, 0x00);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x07, 0x00);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x08, 0x01);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x09, 0x45);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x11, 0x02);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x12, 0x80);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x15, 0x83);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x16, 0x0C);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x29, 0x0A);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x30, 0xFF);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x31, 0xFE);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x32, 0xFD);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x33, 0xFB);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x34, 0xF8);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x35, 0xF5);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x36, 0xF3);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x37, 0xF2);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x38, 0xF2);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x39, 0xF2);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x3A, 0xEF);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x3B, 0xEC);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x3D, 0xE9);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x3F, 0xE5);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x40, 0xE5);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x41, 0xE5);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x2A, 0x13);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x45, 0xFF);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x46, 0xF4);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x47, 0xE7);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x48, 0xDA);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x49, 0xCD);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x4A, 0xC0);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x4B, 0xB3);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x4C, 0xB2);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x4D, 0xB2);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x4E, 0xB2);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x4F, 0x99);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x50, 0x80);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x51, 0x68);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x52, 0x66);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x53, 0x66);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x54, 0x66);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x2B, 0x0E);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x58, 0xFF);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x59, 0xFB);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x5A, 0xF7);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x5B, 0xF3);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x5C, 0xEF);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x5D, 0xE3);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x5E, 0xDA);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x5F, 0xD8);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x60, 0xD8);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x61, 0xD8);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x62, 0xCB);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x63, 0xBF);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x64, 0xB3);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x65, 0xB2);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x66, 0xB2);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x67, 0xB2);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xFF, 0x2A);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xFB, 0x01);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x25, 0x47);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x30, 0x47);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x39, 0x47);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xFF, 0x26);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xFB, 0x01);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x19, 0x10);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x1A, 0xE0);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x1B, 0x10);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x1C, 0x00);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x2A, 0x10);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x2B, 0xE0);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xFF, 0x10);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xFB, 0x01);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xFF, 0xF0);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xFB, 0x01);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x84, 0x08);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x85, 0x0C);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xFF, 0x20);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xFB, 0x01);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x51, 0x00);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xFF, 0x25);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xFB, 0x01);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x91, 0x1F);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x92, 0x0F);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x93, 0x01);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x94, 0x18);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x95, 0x03);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x96, 0x01);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xFF, 0x10);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xB0, 0x01);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xFF, 0x25);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xFB, 0x01);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x19, 0x1F);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x1B, 0x1B);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xFF, 0x24);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xFB, 0x01);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xB8, 0x28);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xFF, 0x27);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xFB, 0x01);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xD0, 0x31);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xD1, 0x20);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xD2, 0x30);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xD4, 0x08);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xDE, 0x80);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xDF, 0x02);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xFF, 0x26);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xFB, 0x01);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x00, 0x81);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x01, 0xB0);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xFF, 0x22);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xFB, 0x01);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x9F, 0x50);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x6F, 0x01);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x70, 0x11);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x73, 0x01);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x74, 0x49);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x76, 0x01);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x77, 0x49);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xA0, 0x3F);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xA9, 0x50);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xAA, 0x28);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xAB, 0x28);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xAD, 0x10);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xB8, 0x00);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xB9, 0x49);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xBA, 0x49);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xBB, 0x49);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xBE, 0x04);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xBF, 0x49);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xC0, 0x04);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xC1, 0x59);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xC2, 0x00);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xC5, 0x00);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xC6, 0x01);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xC7, 0x48);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xCA, 0x43);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xCB, 0x3C);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xCE, 0x00);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xCF, 0x43);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xD0, 0x3C);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xD3, 0x43);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xD4, 0x3C);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xD7, 0x00);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xDC, 0x43);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xDD, 0x3C);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xE1, 0x43);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xE2, 0x3C);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xF2, 0x00);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xF3, 0x01);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xF4, 0x48);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xFF, 0x25);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xFB, 0x01);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x13, 0x01);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x14, 0x23);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xBC, 0x01);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xBD, 0x23);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xFF, 0x2A);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xFB, 0x01);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x97, 0x3C);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x98, 0x02);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x99, 0x95);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x9A, 0x03);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x9B, 0x00);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x9C, 0x0B);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x9D, 0x0A);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x9E, 0x90);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xFF, 0x22);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xFB, 0x01);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x9F, 0x50);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xFF, 0x23);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xFB, 0x01);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xA3, 0x50);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xFF, 0xE0);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xFB, 0x01);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x14, 0x60);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x16, 0xC0);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x4F, 0x02);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xFF, 0xF0);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xFB, 0x01);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x3A, 0x08);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xFF, 0xD0);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xFB, 0x01);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x02, 0xAF);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x09, 0xEE);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x1C, 0x99);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x1D, 0x09);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xFF, 0x10);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xFB, 0x01);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x51, 0x0F, 0xFF);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x53, 0x2C);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x35, 0x00);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xBB, 0x13);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x3B, 0x03, 0xAC, 0x1A, 0x04, 0x04);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x11);
+ msleep(70);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x29);
+ return 0;
+}
+
+static int elish_csot_init_sequence(struct panel_info *pinfo)
+{
+ /* No datasheet */
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xFF, 0x10);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xFB, 0x01);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xB9, 0x05);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xFF, 0x20);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xFB, 0x01);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x18, 0x40);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xFF, 0x10);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xFB, 0x01);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xB9, 0x02);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xFF, 0xD0);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xFB, 0x01);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x02, 0xAF);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x00, 0x30);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x09, 0xEE);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x1C, 0x99);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x1D, 0x09);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xFF, 0xF0);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xFB, 0x01);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x3A, 0x08);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xFF, 0xE0);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xFB, 0x01);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x4F, 0x02);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xFF, 0x20);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xFB, 0x01);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x58, 0x40);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xFF, 0x10);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xFB, 0x01);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x35, 0x00);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xFF, 0x23);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xFB, 0x01);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x00, 0x80);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x01, 0x84);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x05, 0x2D);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x06, 0x00);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x07, 0x00);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x08, 0x01);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x09, 0x45);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x11, 0x02);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x12, 0x80);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x15, 0x83);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x16, 0x0C);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x29, 0x0A);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x30, 0xFF);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x31, 0xFE);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x32, 0xFD);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x33, 0xFB);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x34, 0xF8);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x35, 0xF5);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x36, 0xF3);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x37, 0xF2);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x38, 0xF2);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x39, 0xF2);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x3A, 0xEF);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x3B, 0xEC);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x3D, 0xE9);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x3F, 0xE5);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x40, 0xE5);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x41, 0xE5);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x2A, 0x13);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x45, 0xFF);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x46, 0xF4);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x47, 0xE7);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x48, 0xDA);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x49, 0xCD);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x4A, 0xC0);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x4B, 0xB3);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x4C, 0xB2);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x4D, 0xB2);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x4E, 0xB2);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x4F, 0x99);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x50, 0x80);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x51, 0x68);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x52, 0x66);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x53, 0x66);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x54, 0x66);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x2B, 0x0E);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x58, 0xFF);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x59, 0xFB);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x5A, 0xF7);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x5B, 0xF3);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x5C, 0xEF);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x5D, 0xE3);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x5E, 0xDA);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x5F, 0xD8);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x60, 0xD8);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x61, 0xD8);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x62, 0xCB);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x63, 0xBF);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x64, 0xB3);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x65, 0xB2);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x66, 0xB2);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x67, 0xB2);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xFF, 0x10);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xFB, 0x01);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x51, 0x0F, 0xFF);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x53, 0x2C);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x55, 0x00);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xBB, 0x13);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x3B, 0x03, 0xAC, 0x1A, 0x04, 0x04);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xFF, 0x2A);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xFB, 0x01);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x25, 0x46);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x30, 0x46);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x39, 0x46);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xFF, 0x26);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xFB, 0x01);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x01, 0xB0);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x19, 0x10);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x1A, 0xE0);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x1B, 0x10);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x1C, 0x00);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x2A, 0x10);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x2B, 0xE0);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xFF, 0xF0);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xFB, 0x01);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x84, 0x08);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x85, 0x0C);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xFF, 0x20);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xFB, 0x01);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x51, 0x00);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xFF, 0x25);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xFB, 0x01);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x91, 0x1F);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x92, 0x0F);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x93, 0x01);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x94, 0x18);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x95, 0x03);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x96, 0x01);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xFF, 0x10);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xB0, 0x01);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xFF, 0x25);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xFB, 0x01);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x19, 0x1F);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x1B, 0x1B);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xFF, 0x24);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xFB, 0x01);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xB8, 0x28);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xFF, 0x27);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xFB, 0x01);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xD0, 0x31);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xD1, 0x20);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xD4, 0x08);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xDE, 0x80);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xDF, 0x02);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xFF, 0x26);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xFB, 0x01);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x00, 0x81);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x01, 0xB0);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xFF, 0x22);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xFB, 0x01);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x6F, 0x01);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x70, 0x11);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x73, 0x01);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x74, 0x4D);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xA0, 0x3F);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xA9, 0x50);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xAA, 0x28);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xAB, 0x28);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xAD, 0x10);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xB8, 0x00);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xB9, 0x4B);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xBA, 0x96);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xBB, 0x4B);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xBE, 0x07);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xBF, 0x4B);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xC0, 0x07);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xC1, 0x5C);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xC2, 0x00);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xC5, 0x00);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xC6, 0x3F);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xC7, 0x00);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xCA, 0x08);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xCB, 0x40);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xCE, 0x00);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xCF, 0x08);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xD0, 0x40);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xD3, 0x08);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xD4, 0x40);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xFF, 0x25);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xFB, 0x01);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xBC, 0x01);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xBD, 0x1C);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xFF, 0x2A);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xFB, 0x01);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x9A, 0x03);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0xFF, 0x10);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x11);
+ msleep(70);
+ mipi_dual_dsi_dcs_write_seq(pinfo->dsi, 0x29);
+ return 0;
+}
+
+static const struct drm_display_mode elish_boe_mode = {
+ /* Current max freqency is 104HZ, TODO 120HZ */
+ .clock = (1600 + 60 + 8 + 60) * (2560 + 26 + 4 + 168) * 104 / 1000,
+ .hdisplay = 1600,
+ .hsync_start = 1600 + 60,
+ .hsync_end = 1600 + 60 + 8,
+ .htotal = 1600 + 60 + 8 + 60,
+ .vdisplay = 2560,
+ .vsync_start = 2560 + 26,
+ .vsync_end = 2560 + 26 + 4,
+ .vtotal = 2560 + 26 + 4 + 168,
+};
+
+static const struct drm_display_mode elish_csot_mode = {
+ /* Current max freqency is 104HZ, TODO 120HZ */
+ .clock = (1600 + 200 + 40 + 52) * (2560 + 26 + 4 + 168) * 104 / 1000,
+ .hdisplay = 1600,
+ .hsync_start = 1600 + 200,
+ .hsync_end = 1600 + 200 + 40,
+ .htotal = 1600 + 200 + 40 + 52,
+ .vdisplay = 2560,
+ .vsync_start = 2560 + 26,
+ .vsync_end = 2560 + 26 + 4,
+ .vtotal = 2560 + 26 + 4 + 168,
+};
+
+static const struct panel_desc elish_boe_desc = {
+ .modes = &elish_boe_mode,
+ .dsi_info = {
+ .type = "NT36523",
+ .channel = 0,
+ .node = NULL,
+ },
+ .width_mm = 127,
+ .height_mm = 203,
+ .bpc = 8,
+ .lanes = 3,
+ .format = MIPI_DSI_FMT_RGB888,
+ .mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_CLOCK_NON_CONTINUOUS | MIPI_DSI_MODE_LPM,
+ .init_sequence = elish_boe_init_sequence,
+ .is_dual_dsi = true,
+};
+
+static const struct panel_desc elish_csot_desc = {
+ .modes = &elish_csot_mode,
+ .dsi_info = {
+ .type = "NT36523",
+ .channel = 0,
+ .node = NULL,
+ },
+ .width_mm = 127,
+ .height_mm = 203,
+ .bpc = 8,
+ .lanes = 3,
+ .format = MIPI_DSI_FMT_RGB888,
+ .mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_CLOCK_NON_CONTINUOUS | MIPI_DSI_MODE_LPM,
+ .init_sequence = elish_csot_init_sequence,
+ .is_dual_dsi = true,
+};
+
+static void nt36523_reset(struct panel_info *pinfo)
+{
+ gpiod_set_value_cansleep(pinfo->reset_gpio, 1);
+ usleep_range(12000, 13000);
+ gpiod_set_value_cansleep(pinfo->reset_gpio, 0);
+ usleep_range(12000, 13000);
+ gpiod_set_value_cansleep(pinfo->reset_gpio, 1);
+ usleep_range(12000, 13000);
+ gpiod_set_value_cansleep(pinfo->reset_gpio, 0);
+ usleep_range(12000, 13000);
+}
+
+static int nt36523_prepare(struct drm_panel *panel)
+{
+ struct panel_info *pinfo = to_panel_info(panel);
+ int ret;
+
+ if (pinfo->prepared)
+ return 0;
+
+ ret = regulator_enable(pinfo->vddio);
+ if (ret) {
+ dev_err(panel->dev, "failed to enable vddio regulator: %d\n", ret);
+ return ret;
+ }
+
+ nt36523_reset(pinfo);
+
+ ret = pinfo->desc->init_sequence(pinfo);
+ if (ret < 0) {
+ regulator_disable(pinfo->vddio);
+ dev_err(panel->dev, "failed to initialize panel: %d\n", ret);
+ return ret;
+ }
+
+ pinfo->prepared = true;
+
+ return 0;
+}
+
+static int nt36523_disable(struct drm_panel *panel)
+{
+ struct panel_info *pinfo = to_panel_info(panel);
+ int i, ret;
+
+ for (i = 0; i < DSI_NUM_MIN + pinfo->desc->is_dual_dsi; i++) {
+ ret = mipi_dsi_dcs_set_display_off(pinfo->dsi[i]);
+ if (ret < 0)
+ dev_err(&pinfo->dsi[i]->dev, "failed to set display off: %d\n", ret);
+ }
+
+ for (i = 0; i < DSI_NUM_MIN + pinfo->desc->is_dual_dsi; i++) {
+ ret = mipi_dsi_dcs_enter_sleep_mode(pinfo->dsi[i]);
+ if (ret < 0)
+ dev_err(&pinfo->dsi[i]->dev, "failed to enter sleep mode: %d\n", ret);
+ }
+
+ msleep(70);
+
+ return 0;
+}
+
+static int nt36523_unprepare(struct drm_panel *panel)
+{
+ struct panel_info *pinfo = to_panel_info(panel);
+
+ if (!pinfo->prepared)
+ return 0;
+
+ gpiod_set_value_cansleep(pinfo->reset_gpio, 1);
+ regulator_disable(pinfo->vddio);
+
+ pinfo->prepared = false;
+
+ return 0;
+}
+
+static void nt36523_remove(struct mipi_dsi_device *dsi)
+{
+ struct panel_info *pinfo = mipi_dsi_get_drvdata(dsi);
+ int ret;
+
+ ret = mipi_dsi_detach(pinfo->dsi[0]);
+ if (ret < 0)
+ dev_err(&dsi->dev, "failed to detach from DSI0 host: %d\n", ret);
+
+ if (pinfo->desc->is_dual_dsi) {
+ ret = mipi_dsi_detach(pinfo->dsi[1]);
+ if (ret < 0)
+ dev_err(&pinfo->dsi[1]->dev, "failed to detach from DSI1 host: %d\n", ret);
+ mipi_dsi_device_unregister(pinfo->dsi[1]);
+ }
+
+ drm_panel_remove(&pinfo->panel);
+}
+
+static int nt36523_get_modes(struct drm_panel *panel,
+ struct drm_connector *connector)
+{
+ struct panel_info *pinfo = to_panel_info(panel);
+ const struct drm_display_mode *m = pinfo->desc->modes;
+ struct drm_display_mode *mode;
+
+ mode = drm_mode_duplicate(connector->dev, m);
+ if (!mode) {
+ dev_err(panel->dev, "failed to add mode %ux%u@%u\n",
+ m->hdisplay, m->vdisplay, drm_mode_vrefresh(m));
+ return -ENOMEM;
+ }
+
+ mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
+ drm_mode_set_name(mode);
+ drm_mode_probed_add(connector, mode);
+
+ connector->display_info.width_mm = pinfo->desc->width_mm;
+ connector->display_info.height_mm = pinfo->desc->height_mm;
+ connector->display_info.bpc = pinfo->desc->bpc;
+
+ return 1;
+}
+
+static const struct drm_panel_funcs nt36523_panel_funcs = {
+ .disable = nt36523_disable,
+ .prepare = nt36523_prepare,
+ .unprepare = nt36523_unprepare,
+ .get_modes = nt36523_get_modes,
+};
+
+static int nt36523_probe(struct mipi_dsi_device *dsi)
+{
+ struct device *dev = &dsi->dev;
+ struct device_node *dsi1;
+ struct mipi_dsi_host *dsi1_host;
+ struct panel_info *pinfo;
+ const struct mipi_dsi_device_info *info;
+ int i, ret;
+
+ pinfo = devm_kzalloc(dev, sizeof(*pinfo), GFP_KERNEL);
+ if (!pinfo)
+ return -ENOMEM;
+
+ pinfo->vddio = devm_regulator_get(dev, "vddio");
+ if (IS_ERR(pinfo->vddio))
+ return dev_err_probe(dev, PTR_ERR(pinfo->vddio),
+ "failed to request vddio regulator\n");
+
+ pinfo->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
+ if (IS_ERR(pinfo->reset_gpio))
+ return dev_err_probe(dev, PTR_ERR(pinfo->reset_gpio), "failed to get reset gpio\n");
+
+ pinfo->desc = of_device_get_match_data(dev);
+ if (!pinfo->desc)
+ return -ENODEV;
+
+ /* If the panel is dual dsi, register DSI1 */
+ if (pinfo->desc->is_dual_dsi) {
+ info = &pinfo->desc->dsi_info;
+
+ dsi1 = of_graph_get_remote_node(dsi->dev.of_node, 1, -1);
+ if (!dsi1) {
+ dev_err(dev, "cannot get secondary DSI node.\n");
+ return -ENODEV;
+ }
+
+ dsi1_host = of_find_mipi_dsi_host_by_node(dsi1);
+ of_node_put(dsi1);
+ if (!dsi1_host) {
+ dev_err(dev, "cannot get secondary DSI host\n");
+ return -EPROBE_DEFER;
+ }
+
+ pinfo->dsi[1] = mipi_dsi_device_register_full(dsi1_host, info);
+ if (!pinfo->dsi[1]) {
+ dev_err(dev, "cannot get secondary DSI device\n");
+ return -ENODEV;
+ }
+ }
+
+ pinfo->dsi[0] = dsi;
+ mipi_dsi_set_drvdata(dsi, pinfo);
+ drm_panel_init(&pinfo->panel, dev, &nt36523_panel_funcs, DRM_MODE_CONNECTOR_DSI);
+
+ ret = drm_panel_of_backlight(&pinfo->panel);
+ if (ret)
+ return dev_err_probe(dev, ret, "failed to get backlight\n");
+
+ drm_panel_add(&pinfo->panel);
+
+ for (i = 0; i < DSI_NUM_MIN + pinfo->desc->is_dual_dsi; i++) {
+ pinfo->dsi[i]->lanes = pinfo->desc->lanes;
+ pinfo->dsi[i]->format = pinfo->desc->format;
+ pinfo->dsi[i]->mode_flags = pinfo->desc->mode_flags;
+
+ ret = mipi_dsi_attach(pinfo->dsi[i]);
+ if (ret < 0)
+ return dev_err_probe(dev, ret, "cannot attach to DSI%d host.\n", i);
+ }
+
+ return 0;
+}
+
+static const struct of_device_id nt36523_of_match[] = {
+ {
+ .compatible = "xiaomi,elish-boe-nt36523",
+ .data = &elish_boe_desc,
+ },
+ {
+ .compatible = "xiaomi,elish-csot-nt36523",
+ .data = &elish_csot_desc,
+ },
+ {},
+};
+MODULE_DEVICE_TABLE(of, nt36523_of_match);
+
+static struct mipi_dsi_driver nt36523_driver = {
+ .probe = nt36523_probe,
+ .remove = nt36523_remove,
+ .driver = {
+ .name = "panel-novatek-nt36523",
+ .of_match_table = nt36523_of_match,
+ },
+};
+module_mipi_dsi_driver(nt36523_driver);
+
+MODULE_AUTHOR("Jianhua Lu <[email protected]>");
+MODULE_DESCRIPTION("DRM driver for Novatek NT36523 based MIPI DSI panels");
+MODULE_LICENSE("GPL");
--
2.39.2
On 8.03.2023 05:37, Jianhua Lu wrote:
> Add a driver for panels using the Novatek NT36523 display driver IC.
>
> Signed-off-by: Jianhua Lu <[email protected]>
> ---
> Changes in v3:
> - Refactor source code
>
> Changes in v2:
> - Refactor and clean up source code
This is a veeery vague changelog, akin to "change patch", please
be more specific the next time around.
[...]
> --- /dev/null
> +++ b/drivers/gpu/drm/panel/panel-novatek-nt36523.c
> @@ -0,0 +1,770 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Novatek NT36523 DriverIC panels driver
> + *
> + * Copyright (c) 2022, 2023 Jianhua Lu <[email protected]>
> + */
> +
> +#include <linux/delay.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <linux/of_graph.h>
> +#include <linux/regulator/consumer.h>
> +
> +#include <drm/drm_connector.h>
> +#include <drm/drm_crtc.h>
> +#include <drm/drm_mipi_dsi.h>
> +#include <drm/drm_modes.h>
> +#include <drm/drm_panel.h>
> +
> +#define DSI_NUM_MIN 1
> +
> +/* Macro modified from mipi_dual_dsi_dcs_write_seq */
> +#define mipi_dual_dsi_dcs_write_seq(dsi, cmd, seq...) \
> + do { \
> + static const u8 d[] = { cmd, seq }; \
> + int i, ret; \
> + for (i = 0; i < ARRAY_SIZE(dsi); i++) { \
> + ret = mipi_dsi_dcs_write_buffer(dsi[i], d, ARRAY_SIZE(d)); \
> + if (ret < 0) { \
> + dev_err_ratelimited( \
> + &dsi[i]->dev, "sending command %#02x failed: %d\n", \
> + cmd, ret); \
> + return ret; \
> + } \
> + } \
> + } while (0)
> +
This should definitely be put in a common file..
> +static const struct drm_display_mode elish_boe_mode = {
> + /* Current max freqency is 104HZ, TODO 120HZ */
Is it a DPU issue, or does the panel not work correctly when you
jack up the clocks? Did you use the correct init sequence and porches
for the 120Hz mode, including the mode switch command set?
Could you also implement a 60 (or whatever other value is also
implemented downstream) Hz mode?
> + .clock = (1600 + 60 + 8 + 60) * (2560 + 26 + 4 + 168) * 104 / 1000,
> + .hdisplay = 1600,
> + .hsync_start = 1600 + 60,
> + .hsync_end = 1600 + 60 + 8,
> + .htotal = 1600 + 60 + 8 + 60,
> + .vdisplay = 2560,
> + .vsync_start = 2560 + 26,
> + .vsync_end = 2560 + 26 + 4,
> + .vtotal = 2560 + 26 + 4 + 168,
> +};
> +
> +static const struct drm_display_mode elish_csot_mode = {
> + /* Current max freqency is 104HZ, TODO 120HZ */
> + .clock = (1600 + 200 + 40 + 52) * (2560 + 26 + 4 + 168) * 104 / 1000,
> + .hdisplay = 1600,
> + .hsync_start = 1600 + 200,
> + .hsync_end = 1600 + 200 + 40,
> + .htotal = 1600 + 200 + 40 + 52,
> + .vdisplay = 2560,
> + .vsync_start = 2560 + 26,
> + .vsync_end = 2560 + 26 + 4,
> + .vtotal = 2560 + 26 + 4 + 168,
> +};
> +
> +static const struct panel_desc elish_boe_desc = {
> + .modes = &elish_boe_mode,
> + .dsi_info = {
> + .type = "NT36523",
That's a bit vague, the driver IC is not very telling about the
panel itself. Since we're not able to determine much more information,
this could contain the panel manufacturer and the device name.
> + .channel = 0,
> + .node = NULL,
> + },
> + .width_mm = 127,
> + .height_mm = 203,
> + .bpc = 8,
> + .lanes = 3,
> + .format = MIPI_DSI_FMT_RGB888,
> + .mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_CLOCK_NON_CONTINUOUS | MIPI_DSI_MODE_LPM,
> + .init_sequence = elish_boe_init_sequence,
> + .is_dual_dsi = true,
> +};
> +
[...]
> +static int nt36523_probe(struct mipi_dsi_device *dsi)
> +{
[...]
> + /* If the panel is dual dsi, register DSI1 */
> + if (pinfo->desc->is_dual_dsi) {
> + info = &pinfo->desc->dsi_info;
> +
> + dsi1 = of_graph_get_remote_node(dsi->dev.of_node, 1, -1);
> + if (!dsi1) {
> + dev_err(dev, "cannot get secondary DSI node.\n");
> + return -ENODEV;
> + }
> +
> + dsi1_host = of_find_mipi_dsi_host_by_node(dsi1);
> + of_node_put(dsi1);
Shouldn't you put the reference only if it's found?
> + if (!dsi1_host) {
> + dev_err(dev, "cannot get secondary DSI host\n");
> + return -EPROBE_DEFER;
dev_err_probe, here and in neighbouring exit return paths?
Konrad
> + }
> +
> + pinfo->dsi[1] = mipi_dsi_device_register_full(dsi1_host, info);
> + if (!pinfo->dsi[1]) {
> + dev_err(dev, "cannot get secondary DSI device\n");
> + return -ENODEV;
> + }
> + }
> +
> + pinfo->dsi[0] = dsi;
> + mipi_dsi_set_drvdata(dsi, pinfo);
> + drm_panel_init(&pinfo->panel, dev, &nt36523_panel_funcs, DRM_MODE_CONNECTOR_DSI);
> +
> + ret = drm_panel_of_backlight(&pinfo->panel);
> + if (ret)
> + return dev_err_probe(dev, ret, "failed to get backlight\n");
> +
> + drm_panel_add(&pinfo->panel);
> +
> + for (i = 0; i < DSI_NUM_MIN + pinfo->desc->is_dual_dsi; i++) {
> + pinfo->dsi[i]->lanes = pinfo->desc->lanes;
> + pinfo->dsi[i]->format = pinfo->desc->format;
> + pinfo->dsi[i]->mode_flags = pinfo->desc->mode_flags;
> +
> + ret = mipi_dsi_attach(pinfo->dsi[i]);
> + if (ret < 0)
> + return dev_err_probe(dev, ret, "cannot attach to DSI%d host.\n", i);
> + }
> +
> + return 0;
> +}
> +
> +static const struct of_device_id nt36523_of_match[] = {
> + {
> + .compatible = "xiaomi,elish-boe-nt36523",
> + .data = &elish_boe_desc,
> + },
> + {
> + .compatible = "xiaomi,elish-csot-nt36523",
> + .data = &elish_csot_desc,
> + },
> + {},
> +};
> +MODULE_DEVICE_TABLE(of, nt36523_of_match);
> +
> +static struct mipi_dsi_driver nt36523_driver = {
> + .probe = nt36523_probe,
> + .remove = nt36523_remove,
> + .driver = {
> + .name = "panel-novatek-nt36523",
> + .of_match_table = nt36523_of_match,
> + },
> +};
> +module_mipi_dsi_driver(nt36523_driver);
> +
> +MODULE_AUTHOR("Jianhua Lu <[email protected]>");
> +MODULE_DESCRIPTION("DRM driver for Novatek NT36523 based MIPI DSI panels");
> +MODULE_LICENSE("GPL");
On Wed, Mar 08, 2023 at 12:13:53PM +0100, Konrad Dybcio wrote:
>
>
> On 8.03.2023 05:37, Jianhua Lu wrote:
> > Add a driver for panels using the Novatek NT36523 display driver IC.
> >
> > Signed-off-by: Jianhua Lu <[email protected]>
> > ---
> > Changes in v3:
> > - Refactor source code
> >
> > Changes in v2:
> > - Refactor and clean up source code
> This is a veeery vague changelog, akin to "change patch", please
> be more specific the next time around.
>
Acked, thanks
>
> [...]
>
> > +#define DSI_NUM_MIN 1
> > +
> > +/* Macro modified from mipi_dual_dsi_dcs_write_seq */
> > +#define mipi_dual_dsi_dcs_write_seq(dsi, cmd, seq...) \
> > + do { \
> > + static const u8 d[] = { cmd, seq }; \
> > + int i, ret; \
> > + for (i = 0; i < ARRAY_SIZE(dsi); i++) { \
> > + ret = mipi_dsi_dcs_write_buffer(dsi[i], d, ARRAY_SIZE(d)); \
> > + if (ret < 0) { \
> > + dev_err_ratelimited( \
> > + &dsi[i]->dev, "sending command %#02x failed: %d\n", \
> > + cmd, ret); \
> > + return ret; \
> > + } \
> > + } \
> > + } while (0)
> > +
> This should definitely be put in a common file..
Acked.
>
>
> > +static const struct drm_display_mode elish_boe_mode = {
> > + /* Current max freqency is 104HZ, TODO 120HZ */
> Is it a DPU issue, or does the panel not work correctly when you
> jack up the clocks? Did you use the correct init sequence and porches
> for the 120Hz mode, including the mode switch command set?
>
panel will turn into bluescreen when freqency overs 104HZ, downstream
seems use a dsi-cphy enhance feature to make it working. Init sequence
and porches are right
> Could you also implement a 60 (or whatever other value is also
> implemented downstream) Hz mode?
I will try to implement it.
>
> > + .clock = (1600 + 60 + 8 + 60) * (2560 + 26 + 4 + 168) * 104 / 1000,
> > + .hdisplay = 1600,
> > + .hsync_start = 1600 + 60,
> > + .hsync_end = 1600 + 60 + 8,
> > + .htotal = 1600 + 60 + 8 + 60,
> > + .vdisplay = 2560,
> > + .vsync_start = 2560 + 26,
> > + .vsync_end = 2560 + 26 + 4,
> > + .vtotal = 2560 + 26 + 4 + 168,
> > +};
> > +
> > +static const struct drm_display_mode elish_csot_mode = {
> > + /* Current max freqency is 104HZ, TODO 120HZ */
> > + .clock = (1600 + 200 + 40 + 52) * (2560 + 26 + 4 + 168) * 104 / 1000,
> > + .hdisplay = 1600,
> > + .hsync_start = 1600 + 200,
> > + .hsync_end = 1600 + 200 + 40,
> > + .htotal = 1600 + 200 + 40 + 52,
> > + .vdisplay = 2560,
> > + .vsync_start = 2560 + 26,
> > + .vsync_end = 2560 + 26 + 4,
> > + .vtotal = 2560 + 26 + 4 + 168,
> > +};
> > +
> > +static const struct panel_desc elish_boe_desc = {
> > + .modes = &elish_boe_mode,
> > + .dsi_info = {
> > + .type = "NT36523",
> That's a bit vague, the driver IC is not very telling about the
> panel itself. Since we're not able to determine much more information,
> this could contain the panel manufacturer and the device name.
Acked.
>
> > + .channel = 0,
> > + .node = NULL,
> > + },
> > + .width_mm = 127,
> > + .height_mm = 203,
> > + .bpc = 8,
> > + .lanes = 3,
> > + .format = MIPI_DSI_FMT_RGB888,
> > + .mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_CLOCK_NON_CONTINUOUS | MIPI_DSI_MODE_LPM,
> > + .init_sequence = elish_boe_init_sequence,
> > + .is_dual_dsi = true,
> > +};
> > +
> [...]
>
> > +static int nt36523_probe(struct mipi_dsi_device *dsi)
> > +{
> [...]
>
> > + /* If the panel is dual dsi, register DSI1 */
> > + if (pinfo->desc->is_dual_dsi) {
> > + info = &pinfo->desc->dsi_info;
> > +
> > + dsi1 = of_graph_get_remote_node(dsi->dev.of_node, 1, -1);
> > + if (!dsi1) {
> > + dev_err(dev, "cannot get secondary DSI node.\n");
> > + return -ENODEV;
> > + }
> > +
> > + dsi1_host = of_find_mipi_dsi_host_by_node(dsi1);
> > + of_node_put(dsi1);
> Shouldn't you put the reference only if it's found?
thanks for spot it.
>
> > + if (!dsi1_host) {
> > + dev_err(dev, "cannot get secondary DSI host\n");
> > + return -EPROBE_DEFER;
> dev_err_probe, here and in neighbouring exit return paths?
Acked.
>
>
> Konrad
On 8.03.2023 12:53, Jianhua Lu wrote:
> On Wed, Mar 08, 2023 at 12:13:53PM +0100, Konrad Dybcio wrote:
>>
>>
>> On 8.03.2023 05:37, Jianhua Lu wrote:
>>> Add a driver for panels using the Novatek NT36523 display driver IC.
>>>
>>> Signed-off-by: Jianhua Lu <[email protected]>
>>> ---
>>> Changes in v3:
>>> - Refactor source code
>>>
>>> Changes in v2:
>>> - Refactor and clean up source code
>> This is a veeery vague changelog, akin to "change patch", please
>> be more specific the next time around.
>>
> Acked, thanks
>>
>> [...]
>>
>>> +#define DSI_NUM_MIN 1
>>> +
>>> +/* Macro modified from mipi_dual_dsi_dcs_write_seq */
>>> +#define mipi_dual_dsi_dcs_write_seq(dsi, cmd, seq...) \
>>> + do { \
>>> + static const u8 d[] = { cmd, seq }; \
>>> + int i, ret; \
>>> + for (i = 0; i < ARRAY_SIZE(dsi); i++) { \
>>> + ret = mipi_dsi_dcs_write_buffer(dsi[i], d, ARRAY_SIZE(d)); \
>>> + if (ret < 0) { \
>>> + dev_err_ratelimited( \
>>> + &dsi[i]->dev, "sending command %#02x failed: %d\n", \
>>> + cmd, ret); \
>>> + return ret; \
>>> + } \
>>> + } \
>>> + } while (0)
>>> +
>> This should definitely be put in a common file..
> Acked.
>>
>>
>>> +static const struct drm_display_mode elish_boe_mode = {
>>> + /* Current max freqency is 104HZ, TODO 120HZ */
>> Is it a DPU issue, or does the panel not work correctly when you
>> jack up the clocks? Did you use the correct init sequence and porches
>> for the 120Hz mode, including the mode switch command set?
>>
> panel will turn into bluescreen when freqency overs 104HZ, downstream
> seems use a dsi-cphy enhance feature to make it working. Init sequence
> and porches are right
Documentation/devicetree/bindings/display/msm/dsi-phy-7nm.yaml
phy-type:
description: D-PHY (default) or C-PHY mode
enum: [ 10, 11 ]
default: 10
try setting that to 11 under your DSI PHYs (or one? not sure).
Konrad
>
>> Could you also implement a 60 (or whatever other value is also
>> implemented downstream) Hz mode?
> I will try to implement it.
>>
>>> + .clock = (1600 + 60 + 8 + 60) * (2560 + 26 + 4 + 168) * 104 / 1000,
>>> + .hdisplay = 1600,
>>> + .hsync_start = 1600 + 60,
>>> + .hsync_end = 1600 + 60 + 8,
>>> + .htotal = 1600 + 60 + 8 + 60,
>>> + .vdisplay = 2560,
>>> + .vsync_start = 2560 + 26,
>>> + .vsync_end = 2560 + 26 + 4,
>>> + .vtotal = 2560 + 26 + 4 + 168,
>>> +};
>>> +
>>> +static const struct drm_display_mode elish_csot_mode = {
>>> + /* Current max freqency is 104HZ, TODO 120HZ */
>>> + .clock = (1600 + 200 + 40 + 52) * (2560 + 26 + 4 + 168) * 104 / 1000,
>>> + .hdisplay = 1600,
>>> + .hsync_start = 1600 + 200,
>>> + .hsync_end = 1600 + 200 + 40,
>>> + .htotal = 1600 + 200 + 40 + 52,
>>> + .vdisplay = 2560,
>>> + .vsync_start = 2560 + 26,
>>> + .vsync_end = 2560 + 26 + 4,
>>> + .vtotal = 2560 + 26 + 4 + 168,
>>> +};
>>> +
>>> +static const struct panel_desc elish_boe_desc = {
>>> + .modes = &elish_boe_mode,
>>> + .dsi_info = {
>>> + .type = "NT36523",
>> That's a bit vague, the driver IC is not very telling about the
>> panel itself. Since we're not able to determine much more information,
>> this could contain the panel manufacturer and the device name.
> Acked.
>>
>>> + .channel = 0,
>>> + .node = NULL,
>>> + },
>>> + .width_mm = 127,
>>> + .height_mm = 203,
>>> + .bpc = 8,
>>> + .lanes = 3,
>>> + .format = MIPI_DSI_FMT_RGB888,
>>> + .mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_CLOCK_NON_CONTINUOUS | MIPI_DSI_MODE_LPM,
>>> + .init_sequence = elish_boe_init_sequence,
>>> + .is_dual_dsi = true,
>>> +};
>>> +
>> [...]
>>
>>> +static int nt36523_probe(struct mipi_dsi_device *dsi)
>>> +{
>> [...]
>>
>>> + /* If the panel is dual dsi, register DSI1 */
>>> + if (pinfo->desc->is_dual_dsi) {
>>> + info = &pinfo->desc->dsi_info;
>>> +
>>> + dsi1 = of_graph_get_remote_node(dsi->dev.of_node, 1, -1);
>>> + if (!dsi1) {
>>> + dev_err(dev, "cannot get secondary DSI node.\n");
>>> + return -ENODEV;
>>> + }
>>> +
>>> + dsi1_host = of_find_mipi_dsi_host_by_node(dsi1);
>>> + of_node_put(dsi1);
>> Shouldn't you put the reference only if it's found?
> thanks for spot it.
>>
>>> + if (!dsi1_host) {
>>> + dev_err(dev, "cannot get secondary DSI host\n");
>>> + return -EPROBE_DEFER;
>> dev_err_probe, here and in neighbouring exit return paths?
> Acked.
>>
>>
>> Konrad
On Wed, Mar 08, 2023 at 01:33:39PM +0100, Konrad Dybcio wrote:
>
> phy-type:
> description: D-PHY (default) or C-PHY mode
> enum: [ 10, 11 ]
> default: 10
>
> try setting that to 11 under your DSI PHYs (or one? not sure).
I already used phy-type = <PHY_TYPE_CPHY> before, this equate to qcom,panel-cphy-mode in
downstream panel device tree, but there is qcom,mdss-dsi-cphy-strength isn't
implemented.
> Konrad
> >
> >> Could you also implement a 60 (or whatever other value is also
> >> implemented downstream) Hz mode?
> > I will try to implement it.
> >>
> >>> + .clock = (1600 + 60 + 8 + 60) * (2560 + 26 + 4 + 168) * 104 / 1000,
> >>> + .hdisplay = 1600,
> >>> + .hsync_start = 1600 + 60,
> >>> + .hsync_end = 1600 + 60 + 8,
> >>> + .htotal = 1600 + 60 + 8 + 60,
> >>> + .vdisplay = 2560,
> >>> + .vsync_start = 2560 + 26,
> >>> + .vsync_end = 2560 + 26 + 4,
> >>> + .vtotal = 2560 + 26 + 4 + 168,
> >>> +};
> >>> +
> >>> +static const struct drm_display_mode elish_csot_mode = {
> >>> + /* Current max freqency is 104HZ, TODO 120HZ */
> >>> + .clock = (1600 + 200 + 40 + 52) * (2560 + 26 + 4 + 168) * 104 / 1000,
> >>> + .hdisplay = 1600,
> >>> + .hsync_start = 1600 + 200,
> >>> + .hsync_end = 1600 + 200 + 40,
> >>> + .htotal = 1600 + 200 + 40 + 52,
> >>> + .vdisplay = 2560,
> >>> + .vsync_start = 2560 + 26,
> >>> + .vsync_end = 2560 + 26 + 4,
> >>> + .vtotal = 2560 + 26 + 4 + 168,
> >>> +};
> >>> +
> >>> +static const struct panel_desc elish_boe_desc = {
> >>> + .modes = &elish_boe_mode,
> >>> + .dsi_info = {
> >>> + .type = "NT36523",
> >> That's a bit vague, the driver IC is not very telling about the
> >> panel itself. Since we're not able to determine much more information,
> >> this could contain the panel manufacturer and the device name.
> > Acked.
> >>
> >>> + .channel = 0,
> >>> + .node = NULL,
> >>> + },
> >>> + .width_mm = 127,
> >>> + .height_mm = 203,
> >>> + .bpc = 8,
> >>> + .lanes = 3,
> >>> + .format = MIPI_DSI_FMT_RGB888,
> >>> + .mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_CLOCK_NON_CONTINUOUS | MIPI_DSI_MODE_LPM,
> >>> + .init_sequence = elish_boe_init_sequence,
> >>> + .is_dual_dsi = true,
> >>> +};
> >>> +
> >> [...]
> >>
> >>> +static int nt36523_probe(struct mipi_dsi_device *dsi)
> >>> +{
> >> [...]
> >>
> >>> + /* If the panel is dual dsi, register DSI1 */
> >>> + if (pinfo->desc->is_dual_dsi) {
> >>> + info = &pinfo->desc->dsi_info;
> >>> +
> >>> + dsi1 = of_graph_get_remote_node(dsi->dev.of_node, 1, -1);
> >>> + if (!dsi1) {
> >>> + dev_err(dev, "cannot get secondary DSI node.\n");
> >>> + return -ENODEV;
> >>> + }
> >>> +
> >>> + dsi1_host = of_find_mipi_dsi_host_by_node(dsi1);
> >>> + of_node_put(dsi1);
> >> Shouldn't you put the reference only if it's found?
> > thanks for spot it.
> >>
> >>> + if (!dsi1_host) {
> >>> + dev_err(dev, "cannot get secondary DSI host\n");
> >>> + return -EPROBE_DEFER;
> >> dev_err_probe, here and in neighbouring exit return paths?
> > Acked.
> >>
> >>
> >> Konrad
[...]
= of_graph_get_remote_node(dsi->dev.of_node, 1, -1);
>>>>> + if (!dsi1) {
>>>>> + dev_err(dev, "cannot get secondary DSI node.\n");
>>>>> + return -ENODEV;
>>>>> + }
>>>>> +
>>>>> + dsi1_host = of_find_mipi_dsi_host_by_node(dsi1);
>>>>> + of_node_put(dsi1);
>>>> Shouldn't you put the reference only if it's found?
>>> thanks for spot it.
Apparently not.. please don't change this
Konrad
>>>>
>>>>> + if (!dsi1_host) {
>>>>> + dev_err(dev, "cannot get secondary DSI host\n");
>>>>> + return -EPROBE_DEFER;
>>>> dev_err_probe, here and in neighbouring exit return paths?
>>> Acked.
>>>>
>>>>
>>>> Konrad
On Thu, Mar 09, 2023 at 11:37:17PM +0100, Konrad Dybcio wrote:
>
> [...]
> = of_graph_get_remote_node(dsi->dev.of_node, 1, -1);
> >>>>> + if (!dsi1) {
> >>>>> + dev_err(dev, "cannot get secondary DSI node.\n");
> >>>>> + return -ENODEV;
> >>>>> + }
> >>>>> +
> >>>>> + dsi1_host = of_find_mipi_dsi_host_by_node(dsi1);
> >>>>> + of_node_put(dsi1);
> >>>> Shouldn't you put the reference only if it's found?
> >>> thanks for spot it.
> Apparently not.. please don't change this
OK
>
> Konrad
> >>>>
> >>>>> + if (!dsi1_host) {
> >>>>> + dev_err(dev, "cannot get secondary DSI host\n");
> >>>>> + return -EPROBE_DEFER;
> >>>> dev_err_probe, here and in neighbouring exit return paths?
> >>> Acked.
> >>>>
> >>>>
> >>>> Konrad