From: Ryan Lee <[email protected]>
Added Analog Devices MAX98363 SoundWire Amplifier Driver.
The MAX98363 is a SoundWire peripheral device that supports
MIPI SoundWire v1.2-compatible digital interface for audio and
control data.
Signed-off-by: Ryan Lee <[email protected]>
---
Changes from v1:
Removed the standard SoundWire registers from the amp register table.
Removed .of_match_table and .acpi_match_table.
Removed vdd/dvddio control.
Removed unnecessary source port control in .read_prop.
Removed legacy from I2S driver not used for SoundWire driver.
Removed .shutdown, .bus_config, and unused functions.
Sorted include files in alphabetical order.
sound/soc/codecs/Kconfig | 11 +
sound/soc/codecs/Makefile | 2 +
sound/soc/codecs/max98363.c | 468 ++++++++++++++++++++++++++++++++++++
sound/soc/codecs/max98363.h | 38 +++
4 files changed, 519 insertions(+)
create mode 100644 sound/soc/codecs/max98363.c
create mode 100644 sound/soc/codecs/max98363.h
diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig
index bd72c426a93d..342e43844af0 100644
--- a/sound/soc/codecs/Kconfig
+++ b/sound/soc/codecs/Kconfig
@@ -130,6 +130,7 @@ config SND_SOC_ALL_CODECS
imply SND_SOC_MAX98925
imply SND_SOC_MAX98926
imply SND_SOC_MAX98927
+ imply SND_SOC_MAX98363
imply SND_SOC_MAX98373_I2C
imply SND_SOC_MAX98373_SDW
imply SND_SOC_MAX98390
@@ -1089,6 +1090,16 @@ config SND_SOC_MAX98520
To compile this driver as a module, choose M here.
+config SND_SOC_MAX98363
+ tristate "Analog Devices MAX98363 Soundwire Speaker Amplifier"
+ depends on SOUNDWIRE
+ select REGMAP_SOUNDWIRE
+ help
+ Enable support for Analog Devices MAX98363 Soundwire
+ amplifier. MAX98363 supports the MIPI SoundWire v1.2
+ compatible interface for audio and control data.
+ This amplifier does not support I2C and I2S.
+
config SND_SOC_MAX98373
tristate
diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile
index f1ca18f7946c..791a425bf38f 100644
--- a/sound/soc/codecs/Makefile
+++ b/sound/soc/codecs/Makefile
@@ -143,6 +143,7 @@ snd-soc-max98925-objs := max98925.o
snd-soc-max98926-objs := max98926.o
snd-soc-max98927-objs := max98927.o
snd-soc-max98520-objs := max98520.o
+snd-soc-max98363-objs := max98363.o
snd-soc-max98373-objs := max98373.o
snd-soc-max98373-i2c-objs := max98373-i2c.o
snd-soc-max98373-sdw-objs := max98373-sdw.o
@@ -505,6 +506,7 @@ obj-$(CONFIG_SND_SOC_MAX98925) += snd-soc-max98925.o
obj-$(CONFIG_SND_SOC_MAX98926) += snd-soc-max98926.o
obj-$(CONFIG_SND_SOC_MAX98927) += snd-soc-max98927.o
obj-$(CONFIG_SND_SOC_MAX98520) += snd-soc-max98520.o
+obj-$(CONFIG_SND_SOC_MAX98363) += snd-soc-max98363.o
obj-$(CONFIG_SND_SOC_MAX98373) += snd-soc-max98373.o
obj-$(CONFIG_SND_SOC_MAX98373_I2C) += snd-soc-max98373-i2c.o
obj-$(CONFIG_SND_SOC_MAX98373_SDW) += snd-soc-max98373-sdw.o
diff --git a/sound/soc/codecs/max98363.c b/sound/soc/codecs/max98363.c
new file mode 100644
index 000000000000..69d66af4fb36
--- /dev/null
+++ b/sound/soc/codecs/max98363.c
@@ -0,0 +1,468 @@
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (c) 2022, Analog Devices Inc.
+
+#include <linux/module.h>
+#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
+#include <linux/soundwire/sdw.h>
+#include <linux/soundwire/sdw_registers.h>
+#include <linux/soundwire/sdw_type.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/tlv.h>
+
+#include "max98363.h"
+
+static struct reg_default max98363_reg[] = {
+ {MAX98363_R2001_INTR_RAW, 0x0},
+ {MAX98363_R2003_INTR_STATE, 0x0},
+ {MAX98363_R2005_INTR_FALG, 0x0},
+ {MAX98363_R2007_INTR_EN, 0x0},
+ {MAX98363_R2009_INTR_CLR, 0x0},
+ {MAX98363_R2021_ERR_MON_CTRL, 0x0},
+ {MAX98363_R2022_SPK_MON_THRESH, 0x0},
+ {MAX98363_R2023_SPK_MON_DURATION, 0x0},
+ {MAX98363_R2030_TONE_GEN_CFG, 0x0},
+ {MAX98363_R203F_TONE_GEN_EN, 0x0},
+ {MAX98363_R2040_AMP_VOL, 0x0},
+ {MAX98363_R2041_AMP_GAIN, 0x5},
+ {MAX98363_R2042_DSP_CFG, 0x0},
+ {MAX98363_R21FF_REV_ID, 0x0},
+};
+
+static bool max98363_readable_register(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case MAX98363_R2001_INTR_RAW:
+ case MAX98363_R2003_INTR_STATE:
+ case MAX98363_R2005_INTR_FALG:
+ case MAX98363_R2007_INTR_EN:
+ case MAX98363_R2009_INTR_CLR:
+ case MAX98363_R2021_ERR_MON_CTRL ... MAX98363_R2023_SPK_MON_DURATION:
+ case MAX98363_R2030_TONE_GEN_CFG:
+ case MAX98363_R203F_TONE_GEN_EN:
+ case MAX98363_R2040_AMP_VOL:
+ case MAX98363_R2041_AMP_GAIN:
+ case MAX98363_R2042_DSP_CFG:
+ case MAX98363_R21FF_REV_ID:
+ return true;
+ default:
+ return false;
+ }
+};
+
+static bool max98363_volatile_reg(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case MAX98363_R2001_INTR_RAW:
+ case MAX98363_R2003_INTR_STATE:
+ case MAX98363_R2005_INTR_FALG:
+ case MAX98363_R2007_INTR_EN:
+ case MAX98363_R2009_INTR_CLR:
+ case MAX98363_R21FF_REV_ID:
+ return true;
+ default:
+ return false;
+ }
+}
+
+static const struct regmap_config max98363_sdw_regmap = {
+ .reg_bits = 32,
+ .val_bits = 8,
+ .max_register = MAX98363_R21FF_REV_ID,
+ .reg_defaults = max98363_reg,
+ .num_reg_defaults = ARRAY_SIZE(max98363_reg),
+ .readable_reg = max98363_readable_register,
+ .volatile_reg = max98363_volatile_reg,
+ .cache_type = REGCACHE_RBTREE,
+ .use_single_read = true,
+ .use_single_write = true,
+};
+
+static int max98363_suspend(struct device *dev)
+{
+ struct max98363_priv *max98363 = dev_get_drvdata(dev);
+
+ regcache_cache_only(max98363->regmap, true);
+ regcache_mark_dirty(max98363->regmap);
+
+ return 0;
+}
+
+#define MAX98363_PROBE_TIMEOUT 5000
+
+static int max98363_resume(struct device *dev)
+{
+ struct sdw_slave *slave = dev_to_sdw_dev(dev);
+ struct max98363_priv *max98363 = dev_get_drvdata(dev);
+ unsigned long time;
+
+ if (!max98363->first_hw_init)
+ return 0;
+
+ if (!slave->unattach_request)
+ goto regmap_sync;
+
+ time = wait_for_completion_timeout(&slave->initialization_complete,
+ msecs_to_jiffies(MAX98363_PROBE_TIMEOUT));
+ if (!time) {
+ dev_err(dev, "Initialization not complete, timed out\n");
+ return -ETIMEDOUT;
+ }
+
+regmap_sync:
+
+ slave->unattach_request = 0;
+ regcache_cache_only(max98363->regmap, false);
+ regcache_sync(max98363->regmap);
+
+ return 0;
+}
+
+static DEFINE_RUNTIME_DEV_PM_OPS(max98363_pm, max98363_suspend, max98363_resume, NULL);
+
+static int max98363_read_prop(struct sdw_slave *slave)
+{
+ struct sdw_slave_prop *prop = &slave->prop;
+ int nval, i;
+ u32 bit;
+ unsigned long addr;
+ struct sdw_dpn_prop *dpn;
+
+ prop->scp_int1_mask = SDW_SCP_INT1_BUS_CLASH | SDW_SCP_INT1_PARITY;
+
+ /* BITMAP: 00000010 Dataport 1 is active */
+ prop->sink_ports = BIT(1);
+ prop->paging_support = true;
+ prop->clk_stop_timeout = 20;
+ prop->simple_clk_stop_capable = true;
+ prop->clock_reg_supported = true;
+
+ nval = hweight32(prop->sink_ports);
+ prop->sink_dpn_prop = devm_kcalloc(&slave->dev, nval,
+ sizeof(*prop->sink_dpn_prop),
+ GFP_KERNEL);
+ if (!prop->sink_dpn_prop)
+ return -ENOMEM;
+
+ i = 0;
+ dpn = prop->sink_dpn_prop;
+ addr = prop->sink_ports;
+ for_each_set_bit(bit, &addr, 32) {
+ dpn[i].num = bit;
+ dpn[i].type = SDW_DPN_FULL;
+ dpn[i].simple_ch_prep_sm = true;
+ dpn[i].ch_prep_timeout = 10;
+ i++;
+ }
+
+ return 0;
+}
+
+static int max98363_io_init(struct sdw_slave *slave)
+{
+ struct device *dev = &slave->dev;
+ struct max98363_priv *max98363 = dev_get_drvdata(dev);
+ int ret, reg;
+
+ if (max98363->first_hw_init) {
+ regcache_cache_only(max98363->regmap, false);
+ regcache_cache_bypass(max98363->regmap, true);
+ }
+
+ /*
+ * PM runtime is only enabled when a Slave reports as Attached
+ */
+ if (!max98363->first_hw_init) {
+ /* set autosuspend parameters */
+ pm_runtime_set_autosuspend_delay(dev, 3000);
+ pm_runtime_use_autosuspend(dev);
+
+ /* update count of parent 'active' children */
+ pm_runtime_set_active(dev);
+
+ /* make sure the device does not suspend immediately */
+ pm_runtime_mark_last_busy(dev);
+
+ pm_runtime_enable(dev);
+ }
+
+ pm_runtime_get_noresume(dev);
+
+ ret = regmap_read(max98363->regmap, MAX98363_R21FF_REV_ID, ®);
+ if (!ret) {
+ dev_info(dev, "Revision ID: %X\n", reg);
+ return ret;
+ }
+
+ if (max98363->first_hw_init) {
+ regcache_cache_bypass(max98363->regmap, false);
+ regcache_mark_dirty(max98363->regmap);
+ }
+
+ max98363->first_hw_init = true;
+ max98363->hw_init = true;
+
+ pm_runtime_mark_last_busy(dev);
+ pm_runtime_put_autosuspend(dev);
+
+ return 0;
+}
+
+#define MAX98363_RATES SNDRV_PCM_RATE_8000_192000
+#define MAX98363_FORMATS (SNDRV_PCM_FMTBIT_S32_LE)
+
+static int max98363_sdw_dai_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params,
+ struct snd_soc_dai *dai)
+{
+ struct snd_soc_component *component = dai->component;
+ struct max98363_priv *max98363 =
+ snd_soc_component_get_drvdata(component);
+
+ struct sdw_stream_config stream_config;
+ struct sdw_port_config port_config;
+ enum sdw_data_direction direction;
+ struct sdw_stream_runtime *stream;
+ int ret;
+
+ stream = snd_soc_dai_get_dma_data(dai, substream);
+
+ if (!stream)
+ return -EINVAL;
+
+ if (!max98363->slave)
+ return -EINVAL;
+
+ if (substream->stream != SNDRV_PCM_STREAM_PLAYBACK)
+ return -EINVAL;
+
+ direction = SDW_DATA_DIR_RX;
+ port_config.num = 1;
+
+ stream_config.frame_rate = params_rate(params);
+ stream_config.bps = snd_pcm_format_width(params_format(params));
+ stream_config.direction = direction;
+
+ if (max98363->slot) {
+ stream_config.ch_count = max98363->slot;
+ port_config.ch_mask = max98363->rx_mask;
+ } else {
+ stream_config.ch_count = params_channels(params);
+ port_config.ch_mask = GENMASK((int)stream_config.ch_count - 1, 0);
+ }
+
+ ret = sdw_stream_add_slave(max98363->slave, &stream_config,
+ &port_config, 1, stream);
+ if (ret) {
+ dev_err(dai->dev, "Unable to configure port\n");
+ return ret;
+ }
+
+ if (params_channels(params) > 16) {
+ dev_err(component->dev, "Unsupported channels %d\n",
+ params_channels(params));
+ return -EINVAL;
+ }
+
+ dev_dbg(component->dev, "Format supported %d", params_format(params));
+
+ return 0;
+}
+
+static int max98363_pcm_hw_free(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
+{
+ struct snd_soc_component *component = dai->component;
+ struct max98363_priv *max98363 =
+ snd_soc_component_get_drvdata(component);
+ struct sdw_stream_runtime *stream =
+ snd_soc_dai_get_dma_data(dai, substream);
+
+ if (!max98363->slave)
+ return -EINVAL;
+
+ sdw_stream_remove_slave(max98363->slave, stream);
+
+ return 0;
+}
+
+static int max98363_set_sdw_stream(struct snd_soc_dai *dai,
+ void *sdw_stream, int direction)
+{
+ snd_soc_dai_dma_data_set(dai, direction, sdw_stream);
+
+ return 0;
+}
+
+static const struct snd_soc_dai_ops max98363_dai_sdw_ops = {
+ .hw_params = max98363_sdw_dai_hw_params,
+ .hw_free = max98363_pcm_hw_free,
+ .set_stream = max98363_set_sdw_stream,
+};
+
+static struct snd_soc_dai_driver max98363_dai[] = {
+ {
+ .name = "max98363-aif1",
+ .playback = {
+ .stream_name = "HiFi Playback",
+ .channels_min = 1,
+ .channels_max = 2,
+ .rates = MAX98363_RATES,
+ .formats = MAX98363_FORMATS,
+ },
+ .ops = &max98363_dai_sdw_ops,
+ }
+};
+
+static int max98363_update_status(struct sdw_slave *slave,
+ enum sdw_slave_status status)
+{
+ struct max98363_priv *max98363 = dev_get_drvdata(&slave->dev);
+
+ if (status == SDW_SLAVE_UNATTACHED)
+ max98363->hw_init = false;
+
+ /*
+ * Perform initialization only if slave status is SDW_SLAVE_ATTACHED
+ */
+ if (max98363->hw_init || status != SDW_SLAVE_ATTACHED)
+ return 0;
+
+ /* perform I/O transfers required for Slave initialization */
+ return max98363_io_init(slave);
+}
+
+static struct sdw_slave_ops max98363_slave_ops = {
+ .read_prop = max98363_read_prop,
+ .update_status = max98363_update_status,
+};
+
+static DECLARE_TLV_DB_SCALE(max98363_digital_tlv, -6350, 50, 1);
+static const DECLARE_TLV_DB_RANGE(max98363_spk_tlv,
+ 0, 5, TLV_DB_SCALE_ITEM(-300, 300, 0),
+);
+
+static const char * const max98363_tone_cfg_text[] = {
+ "Reserved", "0", "+FS/2", "-FS/2", "1KHz",
+ "12KHz", "8KHz", "6KHz", "4KHz", "3KHz",
+ "2KHz", "1.5KHz", "Reserved", "500Hz", "250Hz"
+};
+
+static SOC_ENUM_SINGLE_DECL(max98363_tone_cfg_enum,
+ MAX98363_R2030_TONE_GEN_CFG, 0,
+ max98363_tone_cfg_text);
+
+static const char * const max98363_spkmon_duration_text[] = {
+ "8ms", "20ms", "40ms", "60ms",
+ "80ms", "160ms", "240ms", "320ms",
+ "400ms", "480ms", "560ms", "640ms",
+ "720ms", "800ms", "880ms", "960ms"
+};
+
+static SOC_ENUM_SINGLE_DECL(max98363_spkmon_duration_enum,
+ MAX98363_R2023_SPK_MON_DURATION, 0,
+ max98363_spkmon_duration_text);
+
+static const struct snd_kcontrol_new max98363_snd_controls[] = {
+ SOC_SINGLE_TLV("Digital Volume", MAX98363_R2040_AMP_VOL,
+ 0, 0x7F, 1, max98363_digital_tlv),
+ SOC_SINGLE_TLV("Speaker Volume", MAX98363_R2041_AMP_GAIN,
+ 0, 10, 0, max98363_spk_tlv),
+ SOC_SINGLE("Tone Generator Switch", MAX98363_R203F_TONE_GEN_EN,
+ 0, 1, 0),
+ SOC_ENUM("Tone Config", max98363_tone_cfg_enum),
+ SOC_SINGLE("Ramp Switch", MAX98363_R2042_DSP_CFG,
+ MAX98363_AMP_DSP_CFG_RMP_SHIFT, 1, 0),
+ SOC_SINGLE("CLK Monitor Switch", MAX98363_R2021_ERR_MON_CTRL,
+ MAX98363_CLOCK_MON_SHIFT, 1, 0),
+ SOC_SINGLE("SPKMON Monitor Switch", MAX98363_R2021_ERR_MON_CTRL,
+ MAX98363_SPKMON_SHIFT, 1, 0),
+ SOC_SINGLE("SPKMON Thresh", MAX98363_R2022_SPK_MON_THRESH, 0, 0xFF, 0),
+ SOC_ENUM("SPKMON Duration", max98363_spkmon_duration_enum),
+};
+
+static const struct snd_soc_dapm_widget max98363_dapm_widgets[] = {
+ SND_SOC_DAPM_AIF_IN("AIFIN", "HiFi Playback", 0, SND_SOC_NOPM, 0, 0),
+ SND_SOC_DAPM_OUTPUT("BE_OUT"),
+};
+
+static const struct snd_soc_dapm_route max98363_audio_map[] = {
+ /* Plabyack */
+ {"BE_OUT", NULL, "AIFIN"},
+};
+
+const struct snd_soc_component_driver soc_codec_dev_max98363 = {
+ .controls = max98363_snd_controls,
+ .num_controls = ARRAY_SIZE(max98363_snd_controls),
+ .dapm_widgets = max98363_dapm_widgets,
+ .num_dapm_widgets = ARRAY_SIZE(max98363_dapm_widgets),
+ .dapm_routes = max98363_audio_map,
+ .num_dapm_routes = ARRAY_SIZE(max98363_audio_map),
+ .use_pmdown_time = 1,
+ .endianness = 1,
+};
+
+static int max98363_init(struct sdw_slave *slave, struct regmap *regmap)
+{
+ struct max98363_priv *max98363;
+ int ret;
+ struct device *dev = &slave->dev;
+
+ /* Allocate and assign private driver data structure */
+ max98363 = devm_kzalloc(dev, sizeof(*max98363), GFP_KERNEL);
+ if (!max98363)
+ return -ENOMEM;
+
+ dev_set_drvdata(dev, max98363);
+ max98363->regmap = regmap;
+ max98363->slave = slave;
+
+ max98363->hw_init = false;
+ max98363->first_hw_init = false;
+
+ /* codec registration */
+ ret = devm_snd_soc_register_component(dev, &soc_codec_dev_max98363,
+ max98363_dai,
+ ARRAY_SIZE(max98363_dai));
+ if (ret < 0)
+ dev_err(dev, "Failed to register codec: %d\n", ret);
+
+ return ret;
+}
+
+static int max98363_sdw_probe(struct sdw_slave *slave,
+ const struct sdw_device_id *id)
+{
+ struct regmap *regmap;
+
+ /* Regmap Initialization */
+ regmap = devm_regmap_init_sdw(slave, &max98363_sdw_regmap);
+ if (IS_ERR(regmap))
+ return PTR_ERR(regmap);
+
+ return max98363_init(slave, regmap);
+}
+
+static const struct sdw_device_id max98363_id[] = {
+ SDW_SLAVE_ENTRY(0x019F, 0x8363, 0),
+ {},
+};
+MODULE_DEVICE_TABLE(sdw, max98363_id);
+
+static struct sdw_driver max98363_sdw_driver = {
+ .driver = {
+ .name = "max98363",
+ .pm = pm_ptr(&max98363_pm),
+ },
+ .probe = max98363_sdw_probe,
+ .ops = &max98363_slave_ops,
+ .id_table = max98363_id,
+};
+
+module_sdw_driver(max98363_sdw_driver);
+
+MODULE_DESCRIPTION("ASoC MAX98363 driver SDW");
+MODULE_AUTHOR("Ryan Lee <[email protected]>");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/codecs/max98363.h b/sound/soc/codecs/max98363.h
new file mode 100644
index 000000000000..f2703fcb6335
--- /dev/null
+++ b/sound/soc/codecs/max98363.h
@@ -0,0 +1,38 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/* Copyright (c) 2022 Analog Devices Inc. */
+
+#ifndef _MAX98363_H
+#define _MAX98363_H
+
+#define MAX98363_R2000_SW_RESET 0x2000
+#define MAX98363_R2001_INTR_RAW 0x2001
+#define MAX98363_R2003_INTR_STATE 0x2003
+#define MAX98363_R2005_INTR_FALG 0x2005
+#define MAX98363_R2007_INTR_EN 0x2007
+#define MAX98363_R2009_INTR_CLR 0x2009
+#define MAX98363_R2021_ERR_MON_CTRL 0x2021
+#define MAX98363_R2022_SPK_MON_THRESH 0x2022
+#define MAX98363_R2023_SPK_MON_DURATION 0x2023
+#define MAX98363_R2030_TONE_GEN_CFG 0x2030
+#define MAX98363_R203F_TONE_GEN_EN 0x203F
+#define MAX98363_R2040_AMP_VOL 0x2040
+#define MAX98363_R2041_AMP_GAIN 0x2041
+#define MAX98363_R2042_DSP_CFG 0x2042
+#define MAX98363_R21FF_REV_ID 0x21FF
+
+/* MAX98363_R2021_ERR_MON_CTRL */
+#define MAX98363_SPKMON_SHIFT (3)
+#define MAX98363_CLOCK_MON_SHIFT (0)
+
+/* MAX98363_R2042_DSP_CFG */
+#define MAX98363_AMP_DSP_CFG_RMP_SHIFT (3)
+
+struct max98363_priv {
+ struct regmap *regmap;
+ struct sdw_slave *slave;
+ int slot;
+ unsigned int rx_mask;
+ bool hw_init;
+ bool first_hw_init;
+};
+#endif
--
2.34.1
From: Ryan Lee <[email protected]>
This patch adds dt-bindings information for Analog Devices MAX98363
SoundWire Amplifier.
Signed-off-by: Ryan Lee <[email protected]>
---
Changes from v1:
Fixed a syntax error for the 'dt_binding_check' build.
Removed unnecessary properties.
Added description about SoundWire device ID of MAX98363
.../bindings/sound/adi,max98363.yaml | 42 +++++++++++++++++++
1 file changed, 42 insertions(+)
create mode 100644 Documentation/devicetree/bindings/sound/adi,max98363.yaml
diff --git a/Documentation/devicetree/bindings/sound/adi,max98363.yaml b/Documentation/devicetree/bindings/sound/adi,max98363.yaml
new file mode 100644
index 000000000000..0e71b6c84007
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/adi,max98363.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/adi,max98363.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices MAX98363 SoundWire Amplifier
+
+maintainers:
+ - Ryan Lee <[email protected]>
+
+description:
+ The MAX98363 is a SoundWire input Class D mono amplifier that
+ supports MIPI SoundWire v1.2-compatible digital interface for
+ audio and control data.
+ SoundWire peripheral device ID of MAX98363 is 0x3X019F836300
+ where X is the peripheral device unique ID decoded from pin.
+ It supports up to 10 peripheral devices(0x0 to 0x9).
+
+properties:
+ compatible:
+ enum:
+ - adi,max98363
+ reg:
+ maxItems: 1
+ description: Peripheral-device unique ID decoded from pin.
+
+required:
+ - compatible
+ - reg
+additionalProperties: false
+
+examples:
+ - |
+ soundwire {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ amplifier@3 {
+ compatible = "adi,max98363";
+ reg = <0x3>;
+ };
+ };
--
2.34.1
On 11/03/2023 02:14, “Ryan wrote:
> From: Ryan Lee <[email protected]>
>
> This patch adds dt-bindings information for Analog Devices MAX98363
> SoundWire Amplifier.
>
> Signed-off-by: Ryan Lee <[email protected]>
> ---
> Changes from v1:
> Fixed a syntax error for the 'dt_binding_check' build.
> Removed unnecessary properties.
> Added description about SoundWire device ID of MAX98363
>
> .../bindings/sound/adi,max98363.yaml | 42 +++++++++++++++++++
> 1 file changed, 42 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/sound/adi,max98363.yaml
>
> diff --git a/Documentation/devicetree/bindings/sound/adi,max98363.yaml b/Documentation/devicetree/bindings/sound/adi,max98363.yaml
> new file mode 100644
> index 000000000000..0e71b6c84007
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/adi,max98363.yaml
> @@ -0,0 +1,42 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/sound/adi,max98363.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Analog Devices MAX98363 SoundWire Amplifier
> +
> +maintainers:
> + - Ryan Lee <[email protected]>
> +
> +description:
> + The MAX98363 is a SoundWire input Class D mono amplifier that
> + supports MIPI SoundWire v1.2-compatible digital interface for
> + audio and control data.
> + SoundWire peripheral device ID of MAX98363 is 0x3X019F836300
> + where X is the peripheral device unique ID decoded from pin.
> + It supports up to 10 peripheral devices(0x0 to 0x9).
> +
> +properties:
> + compatible:
> + enum:
> + - adi,max98363
Aren't soundwire devices supposed to use device ID as compatible?
Missing blank line
> + reg:
> + maxItems: 1
> + description: Peripheral-device unique ID decoded from pin.
> +
It's not a DAI?
> +required:
> + - compatible
> + - reg
Missing blank line
> +additionalProperties: false
> +
> +examples:
> + - |
> + soundwire {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + amplifier@3 {
> + compatible = "adi,max98363";
> + reg = <0x3>;
That looks a bit different than regular SoundWire bus. I would argue
that it's not SoundWire at all...
> + };
> + };
Best regards,
Krzysztof
> + ret = sdw_stream_add_slave(max98363->slave, &stream_config,
> + &port_config, 1, stream);
> + if (ret) {
> + dev_err(dai->dev, "Unable to configure port\n");
> + return ret;
> + }
> +
> + if (params_channels(params) > 16) {
> + dev_err(component->dev, "Unsupported channels %d\n",
> + params_channels(params));
> + return -EINVAL;
> + }
Do you actually support more than 8 channels?
The data port DPnPrepareCtl and DPn_ChannelEn registers expose 8
channels max. It's always possible to 'cheat' by packing two channels in
the same sample, but that would require custom signaling between manager
and peripheral that isn't present.
Could it be a left-over from a TDM implementation?
The rest of the patch looks fine.
> -----Original Message-----
> From: Krzysztof Kozlowski <[email protected]>
> Sent: Saturday, March 11, 2023 1:10 AM
> To: “Ryan <[email protected]>; [email protected];
> [email protected]; [email protected]; [email protected];
> [email protected]; [email protected]; pierre-
> [email protected]; [email protected];
> [email protected]; [email protected];
> [email protected]; [email protected];
> [email protected]; [email protected]; [email protected];
> [email protected]; [email protected];
> [email protected]; Lee, RyanS <[email protected]>
> Subject: Re: [PATCH V2 2/2] ASoC: dt-bindings: max98363: add soundwire
> amplifier
>
> [External]
>
> On 11/03/2023 02:14, “Ryan wrote:
> > From: Ryan Lee <[email protected]>
> >
> > This patch adds dt-bindings information for Analog Devices MAX98363
> > SoundWire Amplifier.
> >
> > Signed-off-by: Ryan Lee <[email protected]>
> > ---
> > Changes from v1:
> > Fixed a syntax error for the 'dt_binding_check' build.
> > Removed unnecessary properties.
> > Added description about SoundWire device ID of MAX98363
> >
> > .../bindings/sound/adi,max98363.yaml | 42 +++++++++++++++++++
> > 1 file changed, 42 insertions(+)
> > create mode 100644
> > Documentation/devicetree/bindings/sound/adi,max98363.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/sound/adi,max98363.yaml
> > b/Documentation/devicetree/bindings/sound/adi,max98363.yaml
> > new file mode 100644
> > index 000000000000..0e71b6c84007
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/sound/adi,max98363.yaml
> > @@ -0,0 +1,42 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2
> > +---
> > +$id:
> >
> +https://urldefense.com/v3/__http://devicetree.org/schemas/sound/adi,m
> >
> +ax98363.yaml*__;Iw!!A3Ni8CS0y2Y!4ewyyKINBBx1aj2efOARVpQxC3TuNeK
> Cm-K4O
> > +YvWFPfQFCpbhs6NefkJU5s0G-h625nyj5ItjNe-N4VH002-sZAucYo$
> > +$schema:
> > +https://urldefense.com/v3/__http://devicetree.org/meta-
> schemas/core.y
> > +aml*__;Iw!!A3Ni8CS0y2Y!4ewyyKINBBx1aj2efOARVpQxC3TuNeKCm-
> K4OYvWFPfQFC
> > +pbhs6NefkJU5s0G-h625nyj5ItjNe-N4VH002-Pnhea3U$
> > +
> > +title: Analog Devices MAX98363 SoundWire Amplifier
> > +
> > +maintainers:
> > + - Ryan Lee <[email protected]>
> > +
> > +description:
> > + The MAX98363 is a SoundWire input Class D mono amplifier that
> > + supports MIPI SoundWire v1.2-compatible digital interface for
> > + audio and control data.
> > + SoundWire peripheral device ID of MAX98363 is 0x3X019F836300
> > + where X is the peripheral device unique ID decoded from pin.
> > + It supports up to 10 peripheral devices(0x0 to 0x9).
> > +
> > +properties:
> > + compatible:
> > + enum:
> > + - adi,max98363
>
> Aren't soundwire devices supposed to use device ID as compatible?
You are right. ACPI device ID is no longer valid.
I shall add the proper SoundWire device ID for the amp.
>
> Missing blank line
>
> > + reg:
> > + maxItems: 1
> > + description: Peripheral-device unique ID decoded from pin.
> > +
>
> It's not a DAI?
It is DAI. I suppose I need to add #sound-dai-cells' info. I shall add it.
>
> > +required:
> > + - compatible
> > + - reg
>
> Missing blank line
Thanks. I shall fix this.
>
> > +additionalProperties: false
> > +
> > +examples:
> > + - |
> > + soundwire {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + amplifier@3 {
> > + compatible = "adi,max98363";
> > + reg = <0x3>;
>
> That looks a bit different than regular SoundWire bus. I would argue that it's
> not SoundWire at all...
Thanks for the review. My apologies. Your statement is fair.
I shall modify the example.
>
>
> > + };
> > + };
>
> Best regards,
> Krzysztof
> -----Original Message-----
> From: Pierre-Louis Bossart <[email protected]>
> Sent: Monday, March 13, 2023 7:47 AM
> To: “Ryan <[email protected]>; [email protected];
> [email protected]; [email protected]; [email protected];
> [email protected]; [email protected];
> [email protected]; [email protected];
> [email protected]; [email protected];
> [email protected]; [email protected];
> [email protected]; [email protected]; [email protected];
> [email protected]; [email protected];
> [email protected]; Lee, RyanS <[email protected]>
> Subject: Re: [PATCH V2 1/2] ASoC: max98363: add soundwire amplifier driver
>
> [External]
>
>
> > + ret = sdw_stream_add_slave(max98363->slave, &stream_config,
> > + &port_config, 1, stream);
> > + if (ret) {
> > + dev_err(dai->dev, "Unable to configure port\n");
> > + return ret;
> > + }
> > +
> > + if (params_channels(params) > 16) {
> > + dev_err(component->dev, "Unsupported channels %d\n",
> > + params_channels(params));
> > + return -EINVAL;
> > + }
>
> Do you actually support more than 8 channels?
>
> The data port DPnPrepareCtl and DPn_ChannelEn registers expose 8
> channels max. It's always possible to 'cheat' by packing two channels in the
> same sample, but that would require custom signaling between manager and
> peripheral that isn't present.
>
> Could it be a left-over from a TDM implementation?
Thanks for the comment.
I think it is a left-over from a TDM implementation.
I shall modify the code to accept only max number of channels supported by the amp.
>
> The rest of the patch looks fine.