2023-03-11 12:33:04

by Jianhua Lu

[permalink] [raw]
Subject: [PATCH v5 1/2] dt-bindings: display: panel: Add Novatek NT36523 bindings

Novatek NT36523 is a display driver IC used to drive DSI panels.

Signed-off-by: Jianhua Lu <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
---
No changes in v5

No changes in v4

Changes in v3:
- pick up Krzysztof's R-b
- remove vddpos and vddneg supply

Changes in v2:
- Drop unnecessary description
- dsi0 -> dsi
- Correct indentation

.../display/panel/novatek,nt36523.yaml | 85 +++++++++++++++++++
1 file changed, 85 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/panel/novatek,nt36523.yaml

diff --git a/Documentation/devicetree/bindings/display/panel/novatek,nt36523.yaml b/Documentation/devicetree/bindings/display/panel/novatek,nt36523.yaml
new file mode 100644
index 000000000000..0039561ef04c
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/novatek,nt36523.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/novatek,nt36523.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Novatek NT36523 based DSI display Panels
+
+maintainers:
+ - Jianhua Lu <[email protected]>
+
+description: |
+ The Novatek NT36523 is a generic DSI Panel IC used to drive dsi
+ panels. Support video mode panels from China Star Optoelectronics
+ Technology (CSOT) and BOE Technology.
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - xiaomi,elish-boe-nt36523
+ - xiaomi,elish-csot-nt36523
+ - const: novatek,nt36523
+
+ reset-gpios:
+ maxItems: 1
+ description: phandle of gpio for reset line - This should be 8mA
+
+ vddio-supply:
+ description: regulator that supplies the I/O voltage
+
+ reg: true
+ ports: true
+ backlight: true
+
+required:
+ - compatible
+ - reg
+ - vddio-supply
+ - reset-gpios
+ - ports
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ panel@0 {
+ compatible = "xiaomi,elish-csot-nt36523", "novatek,nt36523";
+ reg = <0>;
+
+ vddio-supply = <&vreg_l14a_1p88>;
+ reset-gpios = <&tlmm 75 GPIO_ACTIVE_LOW>;
+ backlight = <&backlight>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ panel_in_0: endpoint {
+ remote-endpoint = <&dsi0_out>;
+ };
+ };
+
+ port@1{
+ reg = <1>;
+ panel_in_1: endpoint {
+ remote-endpoint = <&dsi1_out>;
+ };
+ };
+ };
+ };
+ };
+
+...
--
2.39.2



2023-03-11 12:33:10

by Jianhua Lu

[permalink] [raw]
Subject: [PATCH v5 2/2] drm/panel: Add driver for Novatek NT36523

Add a driver for panels using the Novatek NT36523 display driver IC.

Signed-off-by: Jianhua Lu <[email protected]>
---
Changes in v5:
- use lowercase hex for init sequence
- fix code style
- enable DRM_MODE_TYPE_PREFERRED if where is only one mode.

Changes in v4:
- add multiple modes support
- use dev_err_probe helper
- fix dsi_info type string
- reimplement mipi_dsi_dual_dcs_write_seq() macro

Changes in v3:
- Refactor source code

Changes in v2:
- Refactor and clean up source code

MAINTAINERS | 7 +
drivers/gpu/drm/panel/Kconfig | 10 +
drivers/gpu/drm/panel/Makefile | 1 +
drivers/gpu/drm/panel/panel-novatek-nt36523.c | 777 ++++++++++++++++++
4 files changed, 795 insertions(+)
create mode 100644 drivers/gpu/drm/panel/panel-novatek-nt36523.c

diff --git a/MAINTAINERS b/MAINTAINERS
index 5383af5d3b45..3586248bb05d 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -6537,6 +6537,13 @@ T: git git://anongit.freedesktop.org/drm/drm-misc
F: Documentation/devicetree/bindings/display/panel/sony,acx424akp.yaml
F: drivers/gpu/drm/panel/panel-novatek-nt35560.c

+DRM DRIVER FOR NOVATEK NT36523 PANELS
+M: Jianhua Lu <[email protected]>
+S: Maintained
+T: git git://anongit.freedesktop.org/drm/drm-misc
+F: Documentation/devicetree/bindings/display/panel/novatek,nt36523.yaml
+F: drivers/gpu/drm/panel/panel-novatek-nt36523.c
+
DRM DRIVER FOR NOVATEK NT36672A PANELS
M: Sumit Semwal <[email protected]>
S: Maintained
diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
index 8eeee71c0000..268508743b5c 100644
--- a/drivers/gpu/drm/panel/Kconfig
+++ b/drivers/gpu/drm/panel/Kconfig
@@ -377,6 +377,16 @@ config DRM_PANEL_NOVATEK_NT35950
Sharp panels used in Sony Xperia Z5 Premium and XZ Premium
mobile phones.

+config DRM_PANEL_NOVATEK_NT36523
+ tristate "Novatek NT36523 panel driver"
+ depends on OF
+ depends on DRM_MIPI_DSI
+ depends on BACKLIGHT_CLASS_DEVICE
+ help
+ Say Y here if you want to enable support for the panels built
+ around the Novatek NT36523 display controller, such as some
+ Boe panels used in Xiaomi Mi Pad 5 and 5 Pro tablets.
+
config DRM_PANEL_NOVATEK_NT36672A
tristate "Novatek NT36672A DSI panel"
depends on OF
diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
index c05aa9e23907..570eab8bf2b2 100644
--- a/drivers/gpu/drm/panel/Makefile
+++ b/drivers/gpu/drm/panel/Makefile
@@ -35,6 +35,7 @@ obj-$(CONFIG_DRM_PANEL_NEWVISION_NV3052C) += panel-newvision-nv3052c.o
obj-$(CONFIG_DRM_PANEL_NOVATEK_NT35510) += panel-novatek-nt35510.o
obj-$(CONFIG_DRM_PANEL_NOVATEK_NT35560) += panel-novatek-nt35560.o
obj-$(CONFIG_DRM_PANEL_NOVATEK_NT35950) += panel-novatek-nt35950.o
+obj-$(CONFIG_DRM_PANEL_NOVATEK_NT36523) += panel-novatek-nt36523.o
obj-$(CONFIG_DRM_PANEL_NOVATEK_NT36672A) += panel-novatek-nt36672a.o
obj-$(CONFIG_DRM_PANEL_NOVATEK_NT39016) += panel-novatek-nt39016.o
obj-$(CONFIG_DRM_PANEL_MANTIX_MLAF057WE51) += panel-mantix-mlaf057we51.o
diff --git a/drivers/gpu/drm/panel/panel-novatek-nt36523.c b/drivers/gpu/drm/panel/panel-novatek-nt36523.c
new file mode 100644
index 000000000000..86b38be35c4e
--- /dev/null
+++ b/drivers/gpu/drm/panel/panel-novatek-nt36523.c
@@ -0,0 +1,777 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Novatek NT36523 DriverIC panels driver
+ *
+ * Copyright (c) 2022, 2023 Jianhua Lu <[email protected]>
+ */
+
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/of_graph.h>
+#include <linux/regulator/consumer.h>
+
+#include <drm/drm_connector.h>
+#include <drm/drm_crtc.h>
+#include <drm/drm_mipi_dsi.h>
+#include <drm/drm_modes.h>
+#include <drm/drm_panel.h>
+
+#define DSI_NUM_MIN 1
+
+#define mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, cmd, seq...) \
+ do { \
+ mipi_dsi_dcs_write_seq(dsi0, cmd, seq); \
+ mipi_dsi_dcs_write_seq(dsi1, cmd, seq); \
+ } while (0)
+
+struct panel_info {
+ struct drm_panel panel;
+ struct mipi_dsi_device *dsi[2];
+ const struct panel_desc *desc;
+
+ struct gpio_desc *reset_gpio;
+ struct backlight_device *backlight;
+ struct regulator *vddio;
+
+ bool prepared;
+};
+
+struct panel_desc {
+ unsigned int width_mm;
+ unsigned int height_mm;
+
+ unsigned int bpc;
+ unsigned int lanes;
+ unsigned long mode_flags;
+ enum mipi_dsi_pixel_format format;
+
+ const struct drm_display_mode *modes;
+ unsigned int num_modes;
+ const struct mipi_dsi_device_info dsi_info;
+ int (*init_sequence)(struct panel_info *pinfo);
+
+ bool is_dual_dsi;
+};
+
+static inline struct panel_info *to_panel_info(struct drm_panel *panel)
+{
+ return container_of(panel, struct panel_info, panel);
+}
+
+static int elish_boe_init_sequence(struct panel_info *pinfo)
+{
+ struct mipi_dsi_device *dsi0 = pinfo->dsi[0];
+ struct mipi_dsi_device *dsi1 = pinfo->dsi[1];
+ /* No datasheet, so write magic init sequence directly */
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xff, 0x10);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xfb, 0x01);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xb9, 0x05);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xff, 0x20);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xfb, 0x01);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x18, 0x40);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xff, 0x10);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xfb, 0x01);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xb9, 0x02);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xff, 0x23);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xfb, 0x01);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x00, 0x80);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x01, 0x84);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x05, 0x2d);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x06, 0x00);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x07, 0x00);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x08, 0x01);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x09, 0x45);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x11, 0x02);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x12, 0x80);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x15, 0x83);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x16, 0x0c);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x29, 0x0a);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x30, 0xff);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x31, 0xfe);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x32, 0xfd);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x33, 0xfb);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x34, 0xf8);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x35, 0xf5);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x36, 0xf3);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x37, 0xf2);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x38, 0xf2);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x39, 0xf2);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x3a, 0xef);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x3b, 0xec);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x3d, 0xe9);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x3f, 0xe5);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x40, 0xe5);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x41, 0xe5);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x2a, 0x13);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x45, 0xff);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x46, 0xf4);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x47, 0xe7);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x48, 0xda);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x49, 0xcd);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x4a, 0xc0);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x4b, 0xb3);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x4c, 0xb2);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x4d, 0xb2);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x4e, 0xb2);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x4f, 0x99);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x50, 0x80);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x51, 0x68);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x52, 0x66);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x53, 0x66);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x54, 0x66);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x2b, 0x0e);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x58, 0xff);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x59, 0xfb);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x5a, 0xf7);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x5b, 0xf3);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x5c, 0xef);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x5d, 0xe3);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x5e, 0xda);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x5f, 0xd8);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x60, 0xd8);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x61, 0xd8);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x62, 0xcb);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x63, 0xbf);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x64, 0xb3);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x65, 0xb2);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x66, 0xb2);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x67, 0xb2);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xff, 0x2a);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xfb, 0x01);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x25, 0x47);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x30, 0x47);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x39, 0x47);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xff, 0x26);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xfb, 0x01);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x19, 0x10);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x1a, 0xe0);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x1b, 0x10);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x1c, 0x00);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x2a, 0x10);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x2b, 0xe0);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xff, 0x10);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xfb, 0x01);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xff, 0xf0);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xfb, 0x01);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x84, 0x08);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x85, 0x0c);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xff, 0x20);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xfb, 0x01);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x51, 0x00);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xff, 0x25);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xfb, 0x01);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x91, 0x1f);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x92, 0x0f);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x93, 0x01);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x94, 0x18);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x95, 0x03);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x96, 0x01);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xff, 0x10);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xb0, 0x01);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xff, 0x25);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xfb, 0x01);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x19, 0x1f);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x1b, 0x1b);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xff, 0x24);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xfb, 0x01);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xb8, 0x28);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xff, 0x27);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xfb, 0x01);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xd0, 0x31);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xd1, 0x20);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xd2, 0x30);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xd4, 0x08);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xde, 0x80);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xdf, 0x02);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xff, 0x26);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xfb, 0x01);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x00, 0x81);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x01, 0xb0);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xff, 0x22);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xfb, 0x01);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x9f, 0x50);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x6f, 0x01);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x70, 0x11);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x73, 0x01);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x74, 0x49);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x76, 0x01);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x77, 0x49);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xa0, 0x3f);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xa9, 0x50);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xaa, 0x28);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xab, 0x28);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xad, 0x10);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xb8, 0x00);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xb9, 0x49);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xba, 0x49);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xbb, 0x49);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xbe, 0x04);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xbf, 0x49);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xc0, 0x04);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xc1, 0x59);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xc2, 0x00);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xc5, 0x00);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xc6, 0x01);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xc7, 0x48);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xca, 0x43);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xcb, 0x3c);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xce, 0x00);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xcf, 0x43);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xd0, 0x3c);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xd3, 0x43);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xd4, 0x3c);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xd7, 0x00);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xdc, 0x43);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xdd, 0x3c);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xe1, 0x43);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xe2, 0x3c);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xf2, 0x00);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xf3, 0x01);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xf4, 0x48);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xff, 0x25);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xfb, 0x01);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x13, 0x01);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x14, 0x23);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xbc, 0x01);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xbd, 0x23);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xff, 0x2a);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xfb, 0x01);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x97, 0x3c);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x98, 0x02);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x99, 0x95);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x9a, 0x03);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x9b, 0x00);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x9c, 0x0b);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x9d, 0x0a);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x9e, 0x90);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xff, 0x22);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xfb, 0x01);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x9f, 0x50);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xff, 0x23);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xfb, 0x01);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xa3, 0x50);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xff, 0xe0);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xfb, 0x01);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x14, 0x60);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x16, 0xc0);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x4f, 0x02);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xff, 0xf0);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xfb, 0x01);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x3a, 0x08);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xff, 0xd0);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xfb, 0x01);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x02, 0xaf);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x09, 0xee);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x1c, 0x99);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x1d, 0x09);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xff, 0x10);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xfb, 0x01);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x51, 0x0f, 0xff);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x53, 0x2c);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x35, 0x00);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xbb, 0x13);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x3b, 0x03, 0xac, 0x1a, 0x04, 0x04);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x11);
+ msleep(70);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x29);
+
+ return 0;
+}
+
+static int elish_csot_init_sequence(struct panel_info *pinfo)
+{
+ struct mipi_dsi_device *dsi0 = pinfo->dsi[0];
+ struct mipi_dsi_device *dsi1 = pinfo->dsi[1];
+ /* No datasheet, so write magic init sequence directly */
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xff, 0x10);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xfb, 0x01);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xb9, 0x05);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xff, 0x20);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xfb, 0x01);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x18, 0x40);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xff, 0x10);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xfb, 0x01);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xb9, 0x02);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xff, 0xd0);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xfb, 0x01);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x02, 0xaf);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x00, 0x30);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x09, 0xee);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x1c, 0x99);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x1d, 0x09);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xff, 0xf0);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xfb, 0x01);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x3a, 0x08);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xff, 0xe0);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xfb, 0x01);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x4f, 0x02);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xff, 0x20);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xfb, 0x01);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x58, 0x40);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xff, 0x10);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xfb, 0x01);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x35, 0x00);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xff, 0x23);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xfb, 0x01);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x00, 0x80);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x01, 0x84);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x05, 0x2d);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x06, 0x00);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x07, 0x00);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x08, 0x01);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x09, 0x45);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x11, 0x02);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x12, 0x80);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x15, 0x83);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x16, 0x0c);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x29, 0x0a);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x30, 0xff);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x31, 0xfe);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x32, 0xfd);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x33, 0xfb);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x34, 0xf8);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x35, 0xf5);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x36, 0xf3);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x37, 0xf2);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x38, 0xf2);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x39, 0xf2);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x3a, 0xef);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x3b, 0xec);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x3d, 0xe9);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x3f, 0xe5);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x40, 0xe5);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x41, 0xe5);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x2a, 0x13);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x45, 0xff);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x46, 0xf4);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x47, 0xe7);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x48, 0xda);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x49, 0xcd);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x4a, 0xc0);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x4b, 0xb3);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x4c, 0xb2);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x4d, 0xb2);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x4e, 0xb2);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x4f, 0x99);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x50, 0x80);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x51, 0x68);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x52, 0x66);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x53, 0x66);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x54, 0x66);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x2b, 0x0e);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x58, 0xff);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x59, 0xfb);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x5a, 0xf7);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x5b, 0xf3);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x5c, 0xef);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x5d, 0xe3);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x5e, 0xda);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x5f, 0xd8);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x60, 0xd8);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x61, 0xd8);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x62, 0xcb);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x63, 0xbf);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x64, 0xb3);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x65, 0xb2);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x66, 0xb2);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x67, 0xb2);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xff, 0x10);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xfb, 0x01);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x51, 0x0f, 0xff);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x53, 0x2c);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x55, 0x00);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xbb, 0x13);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x3b, 0x03, 0xac, 0x1a, 0x04, 0x04);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xff, 0x2a);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xfb, 0x01);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x25, 0x46);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x30, 0x46);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x39, 0x46);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xff, 0x26);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xfb, 0x01);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x01, 0xb0);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x19, 0x10);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x1a, 0xe0);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x1b, 0x10);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x1c, 0x00);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x2a, 0x10);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x2b, 0xe0);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xff, 0xf0);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xfb, 0x01);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x84, 0x08);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x85, 0x0c);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xff, 0x20);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xfb, 0x01);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x51, 0x00);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xff, 0x25);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xfb, 0x01);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x91, 0x1f);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x92, 0x0f);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x93, 0x01);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x94, 0x18);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x95, 0x03);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x96, 0x01);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xff, 0x10);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xb0, 0x01);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xff, 0x25);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xfb, 0x01);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x19, 0x1f);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x1b, 0x1b);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xff, 0x24);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xfb, 0x01);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xb8, 0x28);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xff, 0x27);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xfb, 0x01);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xd0, 0x31);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xd1, 0x20);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xd4, 0x08);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xde, 0x80);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xdf, 0x02);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xff, 0x26);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xfb, 0x01);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x00, 0x81);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x01, 0xb0);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xff, 0x22);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xfb, 0x01);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x6f, 0x01);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x70, 0x11);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x73, 0x01);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x74, 0x4d);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xa0, 0x3f);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xa9, 0x50);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xaa, 0x28);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xab, 0x28);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xad, 0x10);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xb8, 0x00);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xb9, 0x4b);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xba, 0x96);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xbb, 0x4b);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xbe, 0x07);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xbf, 0x4b);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xc0, 0x07);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xc1, 0x5c);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xc2, 0x00);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xc5, 0x00);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xc6, 0x3f);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xc7, 0x00);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xca, 0x08);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xcb, 0x40);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xce, 0x00);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xcf, 0x08);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xd0, 0x40);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xd3, 0x08);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xd4, 0x40);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xff, 0x25);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xfb, 0x01);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xbc, 0x01);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xbd, 0x1c);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xff, 0x2a);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xfb, 0x01);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x9a, 0x03);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0xff, 0x10);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x11);
+ msleep(70);
+ mipi_dsi_dual_dcs_write_seq(dsi0, dsi1, 0x29);
+
+ return 0;
+}
+
+static const struct drm_display_mode elish_boe_modes[] = {
+ {
+ /* There is only one 120 Hz timing, but it doesn't work perfectly, 104 Hz preferred */
+ .clock = (1600 + 60 + 8 + 60) * (2560 + 26 + 4 + 168) * 104 / 1000,
+ .hdisplay = 1600,
+ .hsync_start = 1600 + 60,
+ .hsync_end = 1600 + 60 + 8,
+ .htotal = 1600 + 60 + 8 + 60,
+ .vdisplay = 2560,
+ .vsync_start = 2560 + 26,
+ .vsync_end = 2560 + 26 + 4,
+ .vtotal = 2560 + 26 + 4 + 168,
+ },
+};
+
+static const struct drm_display_mode elish_csot_modes[] = {
+ {
+ /* There is only one 120 Hz timing, but it doesn't work perfectly, 104 Hz preferred */
+ .clock = (1600 + 200 + 40 + 52) * (2560 + 26 + 4 + 168) * 104 / 1000,
+ .hdisplay = 1600,
+ .hsync_start = 1600 + 200,
+ .hsync_end = 1600 + 200 + 40,
+ .htotal = 1600 + 200 + 40 + 52,
+ .vdisplay = 2560,
+ .vsync_start = 2560 + 26,
+ .vsync_end = 2560 + 26 + 4,
+ .vtotal = 2560 + 26 + 4 + 168,
+ },
+};
+
+static const struct panel_desc elish_boe_desc = {
+ .modes = elish_boe_modes,
+ .num_modes = ARRAY_SIZE(elish_boe_modes),
+ .dsi_info = {
+ .type = "BOE-elish",
+ .channel = 0,
+ .node = NULL,
+ },
+ .width_mm = 127,
+ .height_mm = 203,
+ .bpc = 8,
+ .lanes = 3,
+ .format = MIPI_DSI_FMT_RGB888,
+ .mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_CLOCK_NON_CONTINUOUS | MIPI_DSI_MODE_LPM,
+ .init_sequence = elish_boe_init_sequence,
+ .is_dual_dsi = true,
+};
+
+static const struct panel_desc elish_csot_desc = {
+ .modes = elish_csot_modes,
+ .num_modes = ARRAY_SIZE(elish_csot_modes),
+ .dsi_info = {
+ .type = "CSOT-elish",
+ .channel = 0,
+ .node = NULL,
+ },
+ .width_mm = 127,
+ .height_mm = 203,
+ .bpc = 8,
+ .lanes = 3,
+ .format = MIPI_DSI_FMT_RGB888,
+ .mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_CLOCK_NON_CONTINUOUS | MIPI_DSI_MODE_LPM,
+ .init_sequence = elish_csot_init_sequence,
+ .is_dual_dsi = true,
+};
+
+static void nt36523_reset(struct panel_info *pinfo)
+{
+ gpiod_set_value_cansleep(pinfo->reset_gpio, 1);
+ usleep_range(12000, 13000);
+ gpiod_set_value_cansleep(pinfo->reset_gpio, 0);
+ usleep_range(12000, 13000);
+ gpiod_set_value_cansleep(pinfo->reset_gpio, 1);
+ usleep_range(12000, 13000);
+ gpiod_set_value_cansleep(pinfo->reset_gpio, 0);
+ usleep_range(12000, 13000);
+}
+
+static int nt36523_prepare(struct drm_panel *panel)
+{
+ struct panel_info *pinfo = to_panel_info(panel);
+ int ret;
+
+ if (pinfo->prepared)
+ return 0;
+
+ ret = regulator_enable(pinfo->vddio);
+ if (ret) {
+ dev_err(panel->dev, "failed to enable vddio regulator: %d\n", ret);
+ return ret;
+ }
+
+ nt36523_reset(pinfo);
+
+ ret = pinfo->desc->init_sequence(pinfo);
+ if (ret < 0) {
+ regulator_disable(pinfo->vddio);
+ dev_err(panel->dev, "failed to initialize panel: %d\n", ret);
+ return ret;
+ }
+
+ pinfo->prepared = true;
+
+ return 0;
+}
+
+static int nt36523_disable(struct drm_panel *panel)
+{
+ struct panel_info *pinfo = to_panel_info(panel);
+ int i, ret;
+
+ for (i = 0; i < DSI_NUM_MIN + pinfo->desc->is_dual_dsi; i++) {
+ ret = mipi_dsi_dcs_set_display_off(pinfo->dsi[i]);
+ if (ret < 0)
+ dev_err(&pinfo->dsi[i]->dev, "failed to set display off: %d\n", ret);
+ }
+
+ for (i = 0; i < DSI_NUM_MIN + pinfo->desc->is_dual_dsi; i++) {
+ ret = mipi_dsi_dcs_enter_sleep_mode(pinfo->dsi[i]);
+ if (ret < 0)
+ dev_err(&pinfo->dsi[i]->dev, "failed to enter sleep mode: %d\n", ret);
+ }
+
+ msleep(70);
+
+ return 0;
+}
+
+static int nt36523_unprepare(struct drm_panel *panel)
+{
+ struct panel_info *pinfo = to_panel_info(panel);
+
+ if (!pinfo->prepared)
+ return 0;
+
+ gpiod_set_value_cansleep(pinfo->reset_gpio, 1);
+ regulator_disable(pinfo->vddio);
+
+ pinfo->prepared = false;
+
+ return 0;
+}
+
+static void nt36523_remove(struct mipi_dsi_device *dsi)
+{
+ struct panel_info *pinfo = mipi_dsi_get_drvdata(dsi);
+ int ret;
+
+ ret = mipi_dsi_detach(pinfo->dsi[0]);
+ if (ret < 0)
+ dev_err(&dsi->dev, "failed to detach from DSI0 host: %d\n", ret);
+
+ if (pinfo->desc->is_dual_dsi) {
+ ret = mipi_dsi_detach(pinfo->dsi[1]);
+ if (ret < 0)
+ dev_err(&pinfo->dsi[1]->dev, "failed to detach from DSI1 host: %d\n", ret);
+ mipi_dsi_device_unregister(pinfo->dsi[1]);
+ }
+
+ drm_panel_remove(&pinfo->panel);
+}
+
+static int nt36523_get_modes(struct drm_panel *panel,
+ struct drm_connector *connector)
+{
+ struct panel_info *pinfo = to_panel_info(panel);
+ int i;
+
+ for (i = 0; i < pinfo->desc->num_modes; i++) {
+ const struct drm_display_mode *m = &pinfo->desc->modes[i];
+ struct drm_display_mode *mode;
+
+ mode = drm_mode_duplicate(connector->dev, m);
+ if (!mode) {
+ dev_err(panel->dev, "failed to add mode %ux%u@%u\n",
+ m->hdisplay, m->vdisplay, drm_mode_vrefresh(m));
+ return -ENOMEM;
+ }
+
+ mode->type = DRM_MODE_TYPE_DRIVER;
+ if (pinfo->desc->num_modes == 1)
+ mode->type |= DRM_MODE_TYPE_PREFERRED;
+
+ drm_mode_set_name(mode);
+ drm_mode_probed_add(connector, mode);
+ }
+
+ connector->display_info.width_mm = pinfo->desc->width_mm;
+ connector->display_info.height_mm = pinfo->desc->height_mm;
+ connector->display_info.bpc = pinfo->desc->bpc;
+
+ return pinfo->desc->num_modes;
+}
+
+static const struct drm_panel_funcs nt36523_panel_funcs = {
+ .disable = nt36523_disable,
+ .prepare = nt36523_prepare,
+ .unprepare = nt36523_unprepare,
+ .get_modes = nt36523_get_modes,
+};
+
+static int nt36523_probe(struct mipi_dsi_device *dsi)
+{
+ struct device *dev = &dsi->dev;
+ struct device_node *dsi1;
+ struct mipi_dsi_host *dsi1_host;
+ struct panel_info *pinfo;
+ const struct mipi_dsi_device_info *info;
+ int i, ret;
+
+ pinfo = devm_kzalloc(dev, sizeof(*pinfo), GFP_KERNEL);
+ if (!pinfo)
+ return -ENOMEM;
+
+ pinfo->vddio = devm_regulator_get(dev, "vddio");
+ if (IS_ERR(pinfo->vddio))
+ return dev_err_probe(dev, PTR_ERR(pinfo->vddio), "failed to get vddio regulator\n");
+
+ pinfo->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
+ if (IS_ERR(pinfo->reset_gpio))
+ return dev_err_probe(dev, PTR_ERR(pinfo->reset_gpio), "failed to get reset gpio\n");
+
+ pinfo->desc = of_device_get_match_data(dev);
+ if (!pinfo->desc)
+ return -ENODEV;
+
+ /* If the panel is dual dsi, register DSI1 */
+ if (pinfo->desc->is_dual_dsi) {
+ info = &pinfo->desc->dsi_info;
+
+ dsi1 = of_graph_get_remote_node(dsi->dev.of_node, 1, -1);
+ if (!dsi1) {
+ dev_err(dev, "cannot get secondary DSI node.\n");
+ return -ENODEV;
+ }
+
+ dsi1_host = of_find_mipi_dsi_host_by_node(dsi1);
+ of_node_put(dsi1);
+ if (!dsi1_host)
+ return dev_err_probe(dev, -EPROBE_DEFER, "cannot get secondary DSI host\n");
+
+ pinfo->dsi[1] = mipi_dsi_device_register_full(dsi1_host, info);
+ if (!pinfo->dsi[1]) {
+ dev_err(dev, "cannot get secondary DSI device\n");
+ return -ENODEV;
+ }
+ }
+
+ pinfo->dsi[0] = dsi;
+ mipi_dsi_set_drvdata(dsi, pinfo);
+ drm_panel_init(&pinfo->panel, dev, &nt36523_panel_funcs, DRM_MODE_CONNECTOR_DSI);
+
+ ret = drm_panel_of_backlight(&pinfo->panel);
+ if (ret)
+ return dev_err_probe(dev, ret, "failed to get backlight\n");
+
+ drm_panel_add(&pinfo->panel);
+
+ for (i = 0; i < DSI_NUM_MIN + pinfo->desc->is_dual_dsi; i++) {
+ pinfo->dsi[i]->lanes = pinfo->desc->lanes;
+ pinfo->dsi[i]->format = pinfo->desc->format;
+ pinfo->dsi[i]->mode_flags = pinfo->desc->mode_flags;
+
+ ret = mipi_dsi_attach(pinfo->dsi[i]);
+ if (ret < 0)
+ return dev_err_probe(dev, ret, "cannot attach to DSI%d host.\n", i);
+ }
+
+ return 0;
+}
+
+static const struct of_device_id nt36523_of_match[] = {
+ {
+ .compatible = "xiaomi,elish-boe-nt36523",
+ .data = &elish_boe_desc,
+ },
+ {
+ .compatible = "xiaomi,elish-csot-nt36523",
+ .data = &elish_csot_desc,
+ },
+ {},
+};
+MODULE_DEVICE_TABLE(of, nt36523_of_match);
+
+static struct mipi_dsi_driver nt36523_driver = {
+ .probe = nt36523_probe,
+ .remove = nt36523_remove,
+ .driver = {
+ .name = "panel-novatek-nt36523",
+ .of_match_table = nt36523_of_match,
+ },
+};
+module_mipi_dsi_driver(nt36523_driver);
+
+MODULE_AUTHOR("Jianhua Lu <[email protected]>");
+MODULE_DESCRIPTION("DRM driver for Novatek NT36523 based MIPI DSI panels");
+MODULE_LICENSE("GPL");
--
2.39.2


2023-03-11 12:39:04

by Konrad Dybcio

[permalink] [raw]
Subject: Re: [PATCH v5 2/2] drm/panel: Add driver for Novatek NT36523



On 11.03.2023 13:32, Jianhua Lu wrote:
> Add a driver for panels using the Novatek NT36523 display driver IC.
>
> Signed-off-by: Jianhua Lu <[email protected]>
> ---
[...]

> +
> +static int nt36523_get_modes(struct drm_panel *panel,
> + struct drm_connector *connector)
> +{
> + struct panel_info *pinfo = to_panel_info(panel);
> + int i;
> +
> + for (i = 0; i < pinfo->desc->num_modes; i++) {
> + const struct drm_display_mode *m = &pinfo->desc->modes[i];
> + struct drm_display_mode *mode;
> +
> + mode = drm_mode_duplicate(connector->dev, m);
> + if (!mode) {
> + dev_err(panel->dev, "failed to add mode %ux%u@%u\n",
> + m->hdisplay, m->vdisplay, drm_mode_vrefresh(m));
> + return -ENOMEM;
> + }
> +
> + mode->type = DRM_MODE_TYPE_DRIVER;
> + if (pinfo->desc->num_modes == 1)
> + mode->type |= DRM_MODE_TYPE_PREFERRED;
That's not quite correct, as that means "if you have more than one
defined panel mode (say 60Hz and 120 Hz), there will be no preferred one".

Konrad
> +
> + drm_mode_set_name(mode);
> + drm_mode_probed_add(connector, mode);
> + }
> +
> + connector->display_info.width_mm = pinfo->desc->width_mm;
> + connector->display_info.height_mm = pinfo->desc->height_mm;
> + connector->display_info.bpc = pinfo->desc->bpc;
> +
> + return pinfo->desc->num_modes;
> +}
> +
> +static const struct drm_panel_funcs nt36523_panel_funcs = {
> + .disable = nt36523_disable,
> + .prepare = nt36523_prepare,
> + .unprepare = nt36523_unprepare,
> + .get_modes = nt36523_get_modes,
> +};
> +
> +static int nt36523_probe(struct mipi_dsi_device *dsi)
> +{
> + struct device *dev = &dsi->dev;
> + struct device_node *dsi1;
> + struct mipi_dsi_host *dsi1_host;
> + struct panel_info *pinfo;
> + const struct mipi_dsi_device_info *info;
> + int i, ret;
> +
> + pinfo = devm_kzalloc(dev, sizeof(*pinfo), GFP_KERNEL);
> + if (!pinfo)
> + return -ENOMEM;
> +
> + pinfo->vddio = devm_regulator_get(dev, "vddio");
> + if (IS_ERR(pinfo->vddio))
> + return dev_err_probe(dev, PTR_ERR(pinfo->vddio), "failed to get vddio regulator\n");
> +
> + pinfo->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
> + if (IS_ERR(pinfo->reset_gpio))
> + return dev_err_probe(dev, PTR_ERR(pinfo->reset_gpio), "failed to get reset gpio\n");
> +
> + pinfo->desc = of_device_get_match_data(dev);
> + if (!pinfo->desc)
> + return -ENODEV;
> +
> + /* If the panel is dual dsi, register DSI1 */
> + if (pinfo->desc->is_dual_dsi) {
> + info = &pinfo->desc->dsi_info;
> +
> + dsi1 = of_graph_get_remote_node(dsi->dev.of_node, 1, -1);
> + if (!dsi1) {
> + dev_err(dev, "cannot get secondary DSI node.\n");
> + return -ENODEV;
> + }
> +
> + dsi1_host = of_find_mipi_dsi_host_by_node(dsi1);
> + of_node_put(dsi1);
> + if (!dsi1_host)
> + return dev_err_probe(dev, -EPROBE_DEFER, "cannot get secondary DSI host\n");
> +
> + pinfo->dsi[1] = mipi_dsi_device_register_full(dsi1_host, info);
> + if (!pinfo->dsi[1]) {
> + dev_err(dev, "cannot get secondary DSI device\n");
> + return -ENODEV;
> + }
> + }
> +
> + pinfo->dsi[0] = dsi;
> + mipi_dsi_set_drvdata(dsi, pinfo);
> + drm_panel_init(&pinfo->panel, dev, &nt36523_panel_funcs, DRM_MODE_CONNECTOR_DSI);
> +
> + ret = drm_panel_of_backlight(&pinfo->panel);
> + if (ret)
> + return dev_err_probe(dev, ret, "failed to get backlight\n");
> +
> + drm_panel_add(&pinfo->panel);
> +
> + for (i = 0; i < DSI_NUM_MIN + pinfo->desc->is_dual_dsi; i++) {
> + pinfo->dsi[i]->lanes = pinfo->desc->lanes;
> + pinfo->dsi[i]->format = pinfo->desc->format;
> + pinfo->dsi[i]->mode_flags = pinfo->desc->mode_flags;
> +
> + ret = mipi_dsi_attach(pinfo->dsi[i]);
> + if (ret < 0)
> + return dev_err_probe(dev, ret, "cannot attach to DSI%d host.\n", i);
> + }
> +
> + return 0;
> +}
> +
> +static const struct of_device_id nt36523_of_match[] = {
> + {
> + .compatible = "xiaomi,elish-boe-nt36523",
> + .data = &elish_boe_desc,
> + },
> + {
> + .compatible = "xiaomi,elish-csot-nt36523",
> + .data = &elish_csot_desc,
> + },
> + {},
> +};
> +MODULE_DEVICE_TABLE(of, nt36523_of_match);
> +
> +static struct mipi_dsi_driver nt36523_driver = {
> + .probe = nt36523_probe,
> + .remove = nt36523_remove,
> + .driver = {
> + .name = "panel-novatek-nt36523",
> + .of_match_table = nt36523_of_match,
> + },
> +};
> +module_mipi_dsi_driver(nt36523_driver);
> +
> +MODULE_AUTHOR("Jianhua Lu <[email protected]>");
> +MODULE_DESCRIPTION("DRM driver for Novatek NT36523 based MIPI DSI panels");
> +MODULE_LICENSE("GPL");

2023-03-11 12:46:49

by Jianhua Lu

[permalink] [raw]
Subject: Re: [PATCH v5 2/2] drm/panel: Add driver for Novatek NT36523

On Sat, Mar 11, 2023 at 01:38:52PM +0100, Konrad Dybcio wrote:
>
>
> On 11.03.2023 13:32, Jianhua Lu wrote:
> > Add a driver for panels using the Novatek NT36523 display driver IC.
> >
> > Signed-off-by: Jianhua Lu <[email protected]>
> > ---
> [...]
>
> > +
> > +static int nt36523_get_modes(struct drm_panel *panel,
> > + struct drm_connector *connector)
> > +{
> > + struct panel_info *pinfo = to_panel_info(panel);
> > + int i;
> > +
> > + for (i = 0; i < pinfo->desc->num_modes; i++) {
> > + const struct drm_display_mode *m = &pinfo->desc->modes[i];
> > + struct drm_display_mode *mode;
> > +
> > + mode = drm_mode_duplicate(connector->dev, m);
> > + if (!mode) {
> > + dev_err(panel->dev, "failed to add mode %ux%u@%u\n",
> > + m->hdisplay, m->vdisplay, drm_mode_vrefresh(m));
> > + return -ENOMEM;
> > + }
> > +
> > + mode->type = DRM_MODE_TYPE_DRIVER;
> > + if (pinfo->desc->num_modes == 1)
> > + mode->type |= DRM_MODE_TYPE_PREFERRED;
> That's not quite correct, as that means "if you have more than one
> defined panel mode (say 60Hz and 120 Hz), there will be no preferred one".
This piece of code I see in the other panels, so I'm not sure if it is
correct. Should
if (pinfo->desc->num_modes > 1)
mode->type |= DRM_MODE_TYPE_PREFERRED;
is correct?
>
> Konrad
> >

2023-03-13 08:08:56

by Neil Armstrong

[permalink] [raw]
Subject: Re: [PATCH v5 2/2] drm/panel: Add driver for Novatek NT36523

On 11/03/2023 13:46, Jianhua Lu wrote:
> On Sat, Mar 11, 2023 at 01:38:52PM +0100, Konrad Dybcio wrote:
>>
>>
>> On 11.03.2023 13:32, Jianhua Lu wrote:
>>> Add a driver for panels using the Novatek NT36523 display driver IC.
>>>
>>> Signed-off-by: Jianhua Lu <[email protected]>
>>> ---
>> [...]
>>
>>> +
>>> +static int nt36523_get_modes(struct drm_panel *panel,
>>> + struct drm_connector *connector)
>>> +{
>>> + struct panel_info *pinfo = to_panel_info(panel);
>>> + int i;
>>> +
>>> + for (i = 0; i < pinfo->desc->num_modes; i++) {
>>> + const struct drm_display_mode *m = &pinfo->desc->modes[i];
>>> + struct drm_display_mode *mode;
>>> +
>>> + mode = drm_mode_duplicate(connector->dev, m);
>>> + if (!mode) {
>>> + dev_err(panel->dev, "failed to add mode %ux%u@%u\n",
>>> + m->hdisplay, m->vdisplay, drm_mode_vrefresh(m));
>>> + return -ENOMEM;
>>> + }
>>> +
>>> + mode->type = DRM_MODE_TYPE_DRIVER;
>>> + if (pinfo->desc->num_modes == 1)
>>> + mode->type |= DRM_MODE_TYPE_PREFERRED;
>> That's not quite correct, as that means "if you have more than one
>> defined panel mode (say 60Hz and 120 Hz), there will be no preferred one".
> This piece of code I see in the other panels, so I'm not sure if it is
> correct. Should
> if (pinfo->desc->num_modes > 1)
> mode->type |= DRM_MODE_TYPE_PREFERRED;
> is correct?

I think only a single mode with DRM_MODE_TYPE_PREFERRED is preferred,
so:
if (i == 0)
mode->type |= DRM_MODE_TYPE_PREFERRED;

would be the right thing to do.


Neil
>>
>> Konrad
>>>


2023-03-13 09:37:01

by Jianhua Lu

[permalink] [raw]
Subject: Re: [PATCH v5 2/2] drm/panel: Add driver for Novatek NT36523

On Mon, Mar 13, 2023 at 09:06:50AM +0100, Neil Armstrong wrote:
> On 11/03/2023 13:46, Jianhua Lu wrote:
> > On Sat, Mar 11, 2023 at 01:38:52PM +0100, Konrad Dybcio wrote:
> >>
> >>
> >> On 11.03.2023 13:32, Jianhua Lu wrote:
> >>> Add a driver for panels using the Novatek NT36523 display driver IC.
> >>>
> >>> Signed-off-by: Jianhua Lu <[email protected]>
> >>> ---
> >> [...]
> >>
> >>> +
> >>> +static int nt36523_get_modes(struct drm_panel *panel,
> >>> + struct drm_connector *connector)
> >>> +{
> >>> + struct panel_info *pinfo = to_panel_info(panel);
> >>> + int i;
> >>> +
> >>> + for (i = 0; i < pinfo->desc->num_modes; i++) {
> >>> + const struct drm_display_mode *m = &pinfo->desc->modes[i];
> >>> + struct drm_display_mode *mode;
> >>> +
> >>> + mode = drm_mode_duplicate(connector->dev, m);
> >>> + if (!mode) {
> >>> + dev_err(panel->dev, "failed to add mode %ux%u@%u\n",
> >>> + m->hdisplay, m->vdisplay, drm_mode_vrefresh(m));
> >>> + return -ENOMEM;
> >>> + }
> >>> +
> >>> + mode->type = DRM_MODE_TYPE_DRIVER;
> >>> + if (pinfo->desc->num_modes == 1)
> >>> + mode->type |= DRM_MODE_TYPE_PREFERRED;
> >> That's not quite correct, as that means "if you have more than one
> >> defined panel mode (say 60Hz and 120 Hz), there will be no preferred one".
> > This piece of code I see in the other panels, so I'm not sure if it is
> > correct. Should
> > if (pinfo->desc->num_modes > 1)
> > mode->type |= DRM_MODE_TYPE_PREFERRED;
> > is correct?
>
> I think only a single mode with DRM_MODE_TYPE_PREFERRED is preferred,
> so:
> if (i == 0)
> mode->type |= DRM_MODE_TYPE_PREFERRED;
>
> would be the right thing to do.
Thanks for your explanation.
>
>
> Neil
> >>
> >> Konrad
> >>>
>

2023-03-13 18:55:16

by Sam Ravnborg

[permalink] [raw]
Subject: Re: [PATCH v5 2/2] drm/panel: Add driver for Novatek NT36523

On Mon, Mar 13, 2023 at 09:06:50AM +0100, Neil Armstrong wrote:
> On 11/03/2023 13:46, Jianhua Lu wrote:
> > On Sat, Mar 11, 2023 at 01:38:52PM +0100, Konrad Dybcio wrote:
> > >
> > >
> > > On 11.03.2023 13:32, Jianhua Lu wrote:
> > > > Add a driver for panels using the Novatek NT36523 display driver IC.
> > > >
> > > > Signed-off-by: Jianhua Lu <[email protected]>
> > > > ---
> > > [...]
> > >
> > > > +
> > > > +static int nt36523_get_modes(struct drm_panel *panel,
> > > > + struct drm_connector *connector)
> > > > +{
> > > > + struct panel_info *pinfo = to_panel_info(panel);
> > > > + int i;
> > > > +
> > > > + for (i = 0; i < pinfo->desc->num_modes; i++) {
> > > > + const struct drm_display_mode *m = &pinfo->desc->modes[i];
> > > > + struct drm_display_mode *mode;
> > > > +
> > > > + mode = drm_mode_duplicate(connector->dev, m);
> > > > + if (!mode) {
> > > > + dev_err(panel->dev, "failed to add mode %ux%u@%u\n",
> > > > + m->hdisplay, m->vdisplay, drm_mode_vrefresh(m));
> > > > + return -ENOMEM;
> > > > + }
> > > > +
> > > > + mode->type = DRM_MODE_TYPE_DRIVER;
> > > > + if (pinfo->desc->num_modes == 1)
> > > > + mode->type |= DRM_MODE_TYPE_PREFERRED;
> > > That's not quite correct, as that means "if you have more than one
> > > defined panel mode (say 60Hz and 120 Hz), there will be no preferred one".
> > This piece of code I see in the other panels, so I'm not sure if it is
> > correct.
Jianhua is correct that the same code exists in several places,
and from a quick browse I consider all the cases bogus.

It would be fine if someone volunteered to fix all the panels so we
avoid this bug to creep into more panel drivers.

Sam

2023-03-14 11:40:39

by Jianhua Lu

[permalink] [raw]
Subject: Re: [PATCH v5 2/2] drm/panel: Add driver for Novatek NT36523

On Mon, Mar 13, 2023 at 07:53:30PM +0100, Sam Ravnborg wrote:
> On Mon, Mar 13, 2023 at 09:06:50AM +0100, Neil Armstrong wrote:
> > On 11/03/2023 13:46, Jianhua Lu wrote:
> > > On Sat, Mar 11, 2023 at 01:38:52PM +0100, Konrad Dybcio wrote:
> > > >
> > > >
> > > > On 11.03.2023 13:32, Jianhua Lu wrote:
> > > > > Add a driver for panels using the Novatek NT36523 display driver IC.
> > > > >
> > > > > Signed-off-by: Jianhua Lu <[email protected]>
> > > > > ---
> > > > [...]
> > > >
> > > > > +
> > > > > +static int nt36523_get_modes(struct drm_panel *panel,
> > > > > + struct drm_connector *connector)
> > > > > +{
> > > > > + struct panel_info *pinfo = to_panel_info(panel);
> > > > > + int i;
> > > > > +
> > > > > + for (i = 0; i < pinfo->desc->num_modes; i++) {
> > > > > + const struct drm_display_mode *m = &pinfo->desc->modes[i];
> > > > > + struct drm_display_mode *mode;
> > > > > +
> > > > > + mode = drm_mode_duplicate(connector->dev, m);
> > > > > + if (!mode) {
> > > > > + dev_err(panel->dev, "failed to add mode %ux%u@%u\n",
> > > > > + m->hdisplay, m->vdisplay, drm_mode_vrefresh(m));
> > > > > + return -ENOMEM;
> > > > > + }
> > > > > +
> > > > > + mode->type = DRM_MODE_TYPE_DRIVER;
> > > > > + if (pinfo->desc->num_modes == 1)
> > > > > + mode->type |= DRM_MODE_TYPE_PREFERRED;
> > > > That's not quite correct, as that means "if you have more than one
> > > > defined panel mode (say 60Hz and 120 Hz), there will be no preferred one".
> > > This piece of code I see in the other panels, so I'm not sure if it is
> > > correct.
> Jianhua is correct that the same code exists in several places,
> and from a quick browse I consider all the cases bogus.
>
> It would be fine if someone volunteered to fix all the panels so we
> avoid this bug to creep into more panel drivers.
I'm glad to send a patch to fix it soon.
>
> Sam