2023-03-11 13:35:05

by Sven Peter

[permalink] [raw]
Subject: [PATCH] PCI: apple: Initialize pcie->nvecs before using it

apple_pcie_setup_port computes ilog2(pcie->nvecs) to setup the number of
MSIs available for each port. It is however called before apple_msi_init
which actually initializes pcie->nvecs.
Luckily, pcie->nvecs is part of kzalloc-ed structure and thus
initialized as zero. ilog2(0) happens to be 0xffffffff which then just
configures more MSIs in hardware than we actually have. This doesn't
break anything because we never hand out those vectors.
Let's swap the order of the two calls so that we use the correctly
initialized value.

Fixes: 476c41ed4597 ("PCI: apple: Implement MSI support")
Signed-off-by: Sven Peter <[email protected]>
---
drivers/pci/controller/pcie-apple.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/pci/controller/pcie-apple.c b/drivers/pci/controller/pcie-apple.c
index 66f37e403a09..8b7b084cf287 100644
--- a/drivers/pci/controller/pcie-apple.c
+++ b/drivers/pci/controller/pcie-apple.c
@@ -783,6 +783,10 @@ static int apple_pcie_init(struct pci_config_window *cfg)
cfg->priv = pcie;
INIT_LIST_HEAD(&pcie->ports);

+ ret = apple_msi_init(pcie);
+ if (ret)
+ return ret;
+
for_each_child_of_node(dev->of_node, of_port) {
ret = apple_pcie_setup_port(pcie, of_port);
if (ret) {
@@ -792,7 +796,7 @@ static int apple_pcie_init(struct pci_config_window *cfg)
}
}

- return apple_msi_init(pcie);
+ return 0;
}

static int apple_pcie_probe(struct platform_device *pdev)
--
2.25.1



2023-03-11 14:11:27

by Eric Curtin

[permalink] [raw]
Subject: Re: [PATCH] PCI: apple: Initialize pcie->nvecs before using it

On Sat, 11 Mar 2023 at 13:41, Sven Peter <[email protected]> wrote:
>
> apple_pcie_setup_port computes ilog2(pcie->nvecs) to setup the number of
> MSIs available for each port. It is however called before apple_msi_init
> which actually initializes pcie->nvecs.
> Luckily, pcie->nvecs is part of kzalloc-ed structure and thus
> initialized as zero. ilog2(0) happens to be 0xffffffff which then just
> configures more MSIs in hardware than we actually have. This doesn't
> break anything because we never hand out those vectors.
> Let's swap the order of the two calls so that we use the correctly
> initialized value.
>
> Fixes: 476c41ed4597 ("PCI: apple: Implement MSI support")
> Signed-off-by: Sven Peter <[email protected]>

Reviewed-by: Eric Curtin <[email protected]>

Is mise le meas/Regards,

Eric Curtin

> ---
> drivers/pci/controller/pcie-apple.c | 6 +++++-
> 1 file changed, 5 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/pci/controller/pcie-apple.c b/drivers/pci/controller/pcie-apple.c
> index 66f37e403a09..8b7b084cf287 100644
> --- a/drivers/pci/controller/pcie-apple.c
> +++ b/drivers/pci/controller/pcie-apple.c
> @@ -783,6 +783,10 @@ static int apple_pcie_init(struct pci_config_window *cfg)
> cfg->priv = pcie;
> INIT_LIST_HEAD(&pcie->ports);
>
> + ret = apple_msi_init(pcie);
> + if (ret)
> + return ret;
> +
> for_each_child_of_node(dev->of_node, of_port) {
> ret = apple_pcie_setup_port(pcie, of_port);
> if (ret) {
> @@ -792,7 +796,7 @@ static int apple_pcie_init(struct pci_config_window *cfg)
> }
> }
>
> - return apple_msi_init(pcie);
> + return 0;
> }
>
> static int apple_pcie_probe(struct platform_device *pdev)
> --
> 2.25.1
>
>


2023-03-11 14:41:40

by Alyssa Rosenzweig

[permalink] [raw]
Subject: Re: [PATCH] PCI: apple: Initialize pcie->nvecs before using it

Whoops!

Reviewed-by: Alyssa Rosenzweig <[email protected]>

March 11, 2023 8:34 AM, "Sven Peter" <[email protected]> wrote:

> apple_pcie_setup_port computes ilog2(pcie->nvecs) to setup the number of
> MSIs available for each port. It is however called before apple_msi_init
> which actually initializes pcie->nvecs.
> Luckily, pcie->nvecs is part of kzalloc-ed structure and thus
> initialized as zero. ilog2(0) happens to be 0xffffffff which then just
> configures more MSIs in hardware than we actually have. This doesn't
> break anything because we never hand out those vectors.
> Let's swap the order of the two calls so that we use the correctly
> initialized value.
>
> Fixes: 476c41ed4597 ("PCI: apple: Implement MSI support")
> Signed-off-by: Sven Peter <[email protected]>
> ---
> drivers/pci/controller/pcie-apple.c | 6 +++++-
> 1 file changed, 5 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/pci/controller/pcie-apple.c b/drivers/pci/controller/pcie-apple.c
> index 66f37e403a09..8b7b084cf287 100644
> --- a/drivers/pci/controller/pcie-apple.c
> +++ b/drivers/pci/controller/pcie-apple.c
> @@ -783,6 +783,10 @@ static int apple_pcie_init(struct pci_config_window *cfg)
> cfg->priv = pcie;
> INIT_LIST_HEAD(&pcie->ports);
>
> + ret = apple_msi_init(pcie);
> + if (ret)
> + return ret;
> +
> for_each_child_of_node(dev->of_node, of_port) {
> ret = apple_pcie_setup_port(pcie, of_port);
> if (ret) {
> @@ -792,7 +796,7 @@ static int apple_pcie_init(struct pci_config_window *cfg)
> }
> }
>
> - return apple_msi_init(pcie);
> + return 0;
> }
>
> static int apple_pcie_probe(struct platform_device *pdev)
> --
> 2.25.1

2023-03-11 19:12:53

by Marc Zyngier

[permalink] [raw]
Subject: Re: [PATCH] PCI: apple: Initialize pcie->nvecs before using it

On Sat, 11 Mar 2023 13:34:53 +0000,
Sven Peter <[email protected]> wrote:
>
> apple_pcie_setup_port computes ilog2(pcie->nvecs) to setup the number of
> MSIs available for each port. It is however called before apple_msi_init
> which actually initializes pcie->nvecs.
> Luckily, pcie->nvecs is part of kzalloc-ed structure and thus
> initialized as zero. ilog2(0) happens to be 0xffffffff which then just
> configures more MSIs in hardware than we actually have. This doesn't
> break anything because we never hand out those vectors.
> Let's swap the order of the two calls so that we use the correctly
> initialized value.
>
> Fixes: 476c41ed4597 ("PCI: apple: Implement MSI support")
> Signed-off-by: Sven Peter <[email protected]>

Huh, how embarrassing... :-/

Reviewed-by: Marc Zyngier <[email protected]>

M.

--
Without deviation from the norm, progress is not possible.

2023-06-24 17:22:31

by Krzysztof Wilczyński

[permalink] [raw]
Subject: Re: [PATCH] PCI: apple: Initialize pcie->nvecs before using it

Hello,

> apple_pcie_setup_port computes ilog2(pcie->nvecs) to setup the number of
> MSIs available for each port. It is however called before apple_msi_init
> which actually initializes pcie->nvecs.
> Luckily, pcie->nvecs is part of kzalloc-ed structure and thus
> initialized as zero. ilog2(0) happens to be 0xffffffff which then just
> configures more MSIs in hardware than we actually have. This doesn't
> break anything because we never hand out those vectors.
> Let's swap the order of the two calls so that we use the correctly
> initialized value.

Applied to controller/apple, thank you!

[1/1] PCI: apple: Initialize pcie->nvecs before use
https://git.kernel.org/pci/pci/c/328a16477027

Krzysztof