clang with W=1 reports
drivers/tty/serial/imx.c:292:19: error:
unused function 'imx_uart_is_imx21' [-Werror,-Wunused-function]
static inline int imx_uart_is_imx21(struct imx_port *sport)
^
drivers/tty/serial/imx.c:297:19: error:
unused function 'imx_uart_is_imx53' [-Werror,-Wunused-function]
static inline int imx_uart_is_imx53(struct imx_port *sport)
^
drivers/tty/serial/imx.c:302:19: error:
unused function 'imx_uart_is_imx6q' [-Werror,-Wunused-function]
static inline int imx_uart_is_imx6q(struct imx_port *sport)
^
These static functions are not used, so remove them.
Signed-off-by: Tom Rix <[email protected]>
---
drivers/tty/serial/imx.c | 14 --------------
1 file changed, 14 deletions(-)
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index 84bc0e768726..dbb3af4c1a34 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -289,20 +289,6 @@ static inline int imx_uart_is_imx1(struct imx_port *sport)
return sport->devdata->devtype == IMX1_UART;
}
-static inline int imx_uart_is_imx21(struct imx_port *sport)
-{
- return sport->devdata->devtype == IMX21_UART;
-}
-
-static inline int imx_uart_is_imx53(struct imx_port *sport)
-{
- return sport->devdata->devtype == IMX53_UART;
-}
-
-static inline int imx_uart_is_imx6q(struct imx_port *sport)
-{
- return sport->devdata->devtype == IMX6Q_UART;
-}
/*
* Save and restore functions for UCR1, UCR2 and UCR3 registers
*/
--
2.27.0
On Fri, Mar 17, 2023 at 04:57:10PM -0400, Tom Rix wrote:
> clang with W=1 reports
> drivers/tty/serial/imx.c:292:19: error:
> unused function 'imx_uart_is_imx21' [-Werror,-Wunused-function]
> static inline int imx_uart_is_imx21(struct imx_port *sport)
> ^
> drivers/tty/serial/imx.c:297:19: error:
> unused function 'imx_uart_is_imx53' [-Werror,-Wunused-function]
> static inline int imx_uart_is_imx53(struct imx_port *sport)
> ^
> drivers/tty/serial/imx.c:302:19: error:
> unused function 'imx_uart_is_imx6q' [-Werror,-Wunused-function]
> static inline int imx_uart_is_imx6q(struct imx_port *sport)
> ^
> These static functions are not used, so remove them.
>
> Signed-off-by: Tom Rix <[email protected]>
Funny, is_imx6q_uart() was introduced in
a496e6284c482555db8078190bb689594d129fa9 and never used. Since that
commit is_imx21_uart() also unused. And the imx53 variant was also never
used.
Looking at that a bit more, the following cleanup is also possible (only
compile tested):
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index 8308a23c55a7..a38ee0ed2210 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -178,8 +178,6 @@
enum imx_uart_type {
IMX1_UART,
IMX21_UART,
- IMX53_UART,
- IMX6Q_UART,
};
/* device type dependent stuff */
@@ -241,30 +239,21 @@ struct imx_port_ucrs {
unsigned int ucr3;
};
-static struct imx_uart_data imx_uart_devdata[] = {
- [IMX1_UART] = {
- .uts_reg = IMX1_UTS,
- .devtype = IMX1_UART,
- },
- [IMX21_UART] = {
- .uts_reg = IMX21_UTS,
- .devtype = IMX21_UART,
- },
- [IMX53_UART] = {
- .uts_reg = IMX21_UTS,
- .devtype = IMX53_UART,
- },
- [IMX6Q_UART] = {
- .uts_reg = IMX21_UTS,
- .devtype = IMX6Q_UART,
- },
+static const struct imx_uart_data imx_uart_imx1_devdata = {
+ .uts_reg = IMX1_UTS,
+ .devtype = IMX1_UART,
+};
+
+static const struct imx_uart_data imx_uart_imx21_devdata = {
+ .uts_reg = IMX21_UTS,
+ .devtype = IMX21_UART,
};
static const struct of_device_id imx_uart_dt_ids[] = {
- { .compatible = "fsl,imx6q-uart", .data = &imx_uart_devdata[IMX6Q_UART], },
- { .compatible = "fsl,imx53-uart", .data = &imx_uart_devdata[IMX53_UART], },
- { .compatible = "fsl,imx1-uart", .data = &imx_uart_devdata[IMX1_UART], },
- { .compatible = "fsl,imx21-uart", .data = &imx_uart_devdata[IMX21_UART], },
+ { .compatible = "fsl,imx6q-uart", .data = &imx_uart_imx21_devdata, },
+ { .compatible = "fsl,imx53-uart", .data = &imx_uart_imx21_devdata, },
+ { .compatible = "fsl,imx1-uart", .data = &imx_uart_imx1_devdata, },
+ { .compatible = "fsl,imx21-uart", .data = &imx_uart_imx21_devdata, },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, imx_uart_dt_ids);
If you feel like squashing that into your commit or put it into a
separate commit with a nice commit log (after convincing yourself that
the change is fine), feel free to do so.
If you don't:
Reviewed-by: Uwe Kleine-K?nig <[email protected]>
Best regards
Uwe
--
Pengutronix e.K. | Uwe Kleine-K?nig |
Industrial Linux Solutions | https://www.pengutronix.de/ |
On 3/18/23 7:30 AM, Uwe Kleine-K?nig wrote:
> On Fri, Mar 17, 2023 at 04:57:10PM -0400, Tom Rix wrote:
>> clang with W=1 reports
>> drivers/tty/serial/imx.c:292:19: error:
>> unused function 'imx_uart_is_imx21' [-Werror,-Wunused-function]
>> static inline int imx_uart_is_imx21(struct imx_port *sport)
>> ^
>> drivers/tty/serial/imx.c:297:19: error:
>> unused function 'imx_uart_is_imx53' [-Werror,-Wunused-function]
>> static inline int imx_uart_is_imx53(struct imx_port *sport)
>> ^
>> drivers/tty/serial/imx.c:302:19: error:
>> unused function 'imx_uart_is_imx6q' [-Werror,-Wunused-function]
>> static inline int imx_uart_is_imx6q(struct imx_port *sport)
>> ^
>> These static functions are not used, so remove them.
>>
>> Signed-off-by: Tom Rix <[email protected]>
> Funny, is_imx6q_uart() was introduced in
> a496e6284c482555db8078190bb689594d129fa9 and never used. Since that
> commit is_imx21_uart() also unused. And the imx53 variant was also never
> used.
>
> Looking at that a bit more, the following cleanup is also possible (only
> compile tested):
>
> diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
> index 8308a23c55a7..a38ee0ed2210 100644
> --- a/drivers/tty/serial/imx.c
> +++ b/drivers/tty/serial/imx.c
> @@ -178,8 +178,6 @@
> enum imx_uart_type {
> IMX1_UART,
> IMX21_UART,
> - IMX53_UART,
> - IMX6Q_UART,
> };
>
> /* device type dependent stuff */
> @@ -241,30 +239,21 @@ struct imx_port_ucrs {
> unsigned int ucr3;
> };
>
> -static struct imx_uart_data imx_uart_devdata[] = {
> - [IMX1_UART] = {
> - .uts_reg = IMX1_UTS,
> - .devtype = IMX1_UART,
> - },
> - [IMX21_UART] = {
> - .uts_reg = IMX21_UTS,
> - .devtype = IMX21_UART,
> - },
> - [IMX53_UART] = {
> - .uts_reg = IMX21_UTS,
> - .devtype = IMX53_UART,
> - },
> - [IMX6Q_UART] = {
> - .uts_reg = IMX21_UTS,
> - .devtype = IMX6Q_UART,
> - },
> +static const struct imx_uart_data imx_uart_imx1_devdata = {
> + .uts_reg = IMX1_UTS,
> + .devtype = IMX1_UART,
> +};
> +
> +static const struct imx_uart_data imx_uart_imx21_devdata = {
> + .uts_reg = IMX21_UTS,
> + .devtype = IMX21_UART,
> };
>
> static const struct of_device_id imx_uart_dt_ids[] = {
> - { .compatible = "fsl,imx6q-uart", .data = &imx_uart_devdata[IMX6Q_UART], },
> - { .compatible = "fsl,imx53-uart", .data = &imx_uart_devdata[IMX53_UART], },
> - { .compatible = "fsl,imx1-uart", .data = &imx_uart_devdata[IMX1_UART], },
> - { .compatible = "fsl,imx21-uart", .data = &imx_uart_devdata[IMX21_UART], },
> + { .compatible = "fsl,imx6q-uart", .data = &imx_uart_imx21_devdata, },
> + { .compatible = "fsl,imx53-uart", .data = &imx_uart_imx21_devdata, },
> + { .compatible = "fsl,imx1-uart", .data = &imx_uart_imx1_devdata, },
> + { .compatible = "fsl,imx21-uart", .data = &imx_uart_imx21_devdata, },
> { /* sentinel */ }
> };
> MODULE_DEVICE_TABLE(of, imx_uart_dt_ids);
>
> If you feel like squashing that into your commit or put it into a
> separate commit with a nice commit log (after convincing yourself that
> the change is fine), feel free to do so.
>
> If you don't:
My interest is not in imx specifically, but rather cleaning up all the
unused functions.
I _think_ I can get the list of around 70 down to around 10 but it will
take a while.
Tom
>
> Reviewed-by: Uwe Kleine-K?nig <[email protected]>
>
> Best regards
> Uwe
>