The s11b, s12b, s1c and bob supplies are used by several pmic
regulators. Add the missing description to the devicetree.
Note that there are still some consumers that are not (fully) described
in the devicetree so the supplies must remain marked as always-on for
now.
Signed-off-by: Johan Hovold <[email protected]>
---
.../qcom/sc8280xp-lenovo-thinkpad-x13s.dts | 22 +++++++++++++++++++
1 file changed, 22 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
index 44cf93ddc1b9..14e8d0a78b60 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
@@ -372,7 +372,11 @@ regulators-0 {
compatible = "qcom,pm8350-rpmh-regulators";
qcom,pmic-id = "b";
+ vdd-l1-l4-supply = <&vreg_s12b>;
+ vdd-l2-l7-supply = <&vreg_bob>;
vdd-l3-l5-supply = <&vreg_s11b>;
+ vdd-l6-l9-l10-supply = <&vreg_s12b>;
+ vdd-l8-supply = <&vreg_s12b>;
vreg_s10b: smps10 {
regulator-name = "vreg_s10b";
@@ -425,7 +429,21 @@ vreg_l6b: ldo6 {
regulators-1 {
compatible = "qcom,pm8350c-rpmh-regulators";
qcom,pmic-id = "c";
+
vdd-bob-supply = <&vreg_vph_pwr>;
+ vdd-l1-l12-supply = <&vreg_s1c>;
+ vdd-l2-l8-supply = <&vreg_s1c>;
+ vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob>;
+ vdd-l6-l9-l11-supply = <&vreg_bob>;
+ vdd-l10-supply = <&vreg_s11b>;
+
+ vreg_s1c: smps1 {
+ regulator-name = "vreg_s1c";
+ regulator-min-microvolt = <1880000>;
+ regulator-max-microvolt = <1900000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-always-on;
+ };
vreg_l1c: ldo1 {
regulator-name = "vreg_l1c";
@@ -462,6 +480,10 @@ regulators-2 {
qcom,pmic-id = "d";
vdd-l1-l4-supply = <&vreg_s11b>;
+ vdd-l2-l7-supply = <&vreg_bob>;
+ vdd-l3-l5-supply = <&vreg_s11b>;
+ vdd-l6-l9-l10-supply = <&vreg_s12b>;
+ vdd-l8-supply = <&vreg_s12b>;
vreg_l3d: ldo3 {
regulator-name = "vreg_l3d";
--
2.39.2