Hi,
The Designware 10G MAC(dwxgmac) driver has lack of vlan support in term of
hardware, such as the hardware accelerated VLAN stripping, hardware filtering
and vlan fail queue. These patches are meant to enable not only the hardware
support of VLAN features but also the promiscous mode. The driver was not draft
from scratch, however it was ported from the Ethernet Quality-of-Service (dwmac4)
driver, it was tested working on ourside.
Boon Khai Ng (8):
drivers: net: stmmac_main: Add support for HW-accelerated VLAN
Stripping
drivers: net: stmmac_main: fix vlan toggle option.
drivers: net: stmmac: Add support for HW-accelerated VLAN Stripping
drivers: net: dwmac: Add use_hw_vlan setting
net: stmmac: Add support for VLAN Rx filtering
net: stmmac: Add support for VLAN promiscuous mode
net: stmmac: Add Double VLAN handling for VLAN Rx filtering
net: stmmac: Add option for VLAN filter fail queue enable
drivers/net/ethernet/stmicro/stmmac/common.h | 1 +
.../net/ethernet/stmicro/stmmac/dwxgmac2.h | 56 +++
.../ethernet/stmicro/stmmac/dwxgmac2_core.c | 328 +++++++++++++++++-
.../ethernet/stmicro/stmmac/dwxgmac2_descs.c | 15 +
drivers/net/ethernet/stmicro/stmmac/hwif.h | 16 +
.../net/ethernet/stmicro/stmmac/stmmac_main.c | 30 +-
.../ethernet/stmicro/stmmac/stmmac_platform.c | 13 +
include/linux/stmmac.h | 1 +
8 files changed, 452 insertions(+), 8 deletions(-)
--
2.25.1
My appologies for sending out this review by accident, this is meant for internal reivew,
kindly ignore and close this thread. Thanks.