From: Peng Fan <[email protected]>
Patch 1,2 is fix the freq table and set rate flow
Patch 3,4,5 is to support integer, A55 clk, mcore_booted parameter
Jacky Bai (1):
clk: imx: fracn-gppll: Add 300MHz freq support for imx9
Peng Fan (6):
clk: imx: fracn-gppll: fix the rate table
clk: imx: fracn-gppll: disable hardware select control
clk: imx: fracn-gppll: support integer pll
clk: imx: imx93: add mcore_booted module paratemter
dt-binding: clock: imx93: add NIC, A55 and ARM PLL CLK
clk: imx: imx93: Add nic and A55 clk
drivers/clk/imx/clk-composite-93.c | 8 ++-
drivers/clk/imx/clk-fracn-gppll.c | 91 +++++++++++++++++++++----
drivers/clk/imx/clk-imx93.c | 19 +++++-
drivers/clk/imx/clk.h | 7 ++
include/dt-bindings/clock/imx93-clock.h | 6 +-
5 files changed, 113 insertions(+), 18 deletions(-)
--
2.37.1
From: Peng Fan <[email protected]>
The Fvco should be range 2.4GHz to 5GHz, the original table voilate the
spec, so update the table to fix it.
Fixes: c196175acdd3 ("clk: imx: clk-fracn-gppll: Add more freq config for video pll")
Fixes: 044034efbeea ("clk: imx: clk-fracn-gppll: fix mfd value")
Fixes: 1b26cb8a77a4 ("clk: imx: support fracn gppll")
Signed-off-by: Jacky Bai <[email protected]>
Signed-off-by: Peng Fan <[email protected]>
---
drivers/clk/imx/clk-fracn-gppll.c | 16 +++++++++-------
1 file changed, 9 insertions(+), 7 deletions(-)
diff --git a/drivers/clk/imx/clk-fracn-gppll.c b/drivers/clk/imx/clk-fracn-gppll.c
index a2aaa14fc1ae..ec50c41e2a4c 100644
--- a/drivers/clk/imx/clk-fracn-gppll.c
+++ b/drivers/clk/imx/clk-fracn-gppll.c
@@ -60,18 +60,20 @@ struct clk_fracn_gppll {
};
/*
- * Fvco = Fref * (MFI + MFN / MFD)
- * Fout = Fvco / (rdiv * odiv)
+ * Fvco = (Fref / rdiv) * (MFI + MFN / MFD)
+ * Fout = Fvco / odiv
+ * The (Fref / rdiv) should be in range 20MHz to 40MHz
+ * The Fvco should be in range 2.5Ghz to 5Ghz
*/
static const struct imx_fracn_gppll_rate_table fracn_tbl[] = {
- PLL_FRACN_GP(650000000U, 81, 0, 1, 0, 3),
+ PLL_FRACN_GP(650000000U, 162, 50, 100, 0, 6),
PLL_FRACN_GP(594000000U, 198, 0, 1, 0, 8),
- PLL_FRACN_GP(560000000U, 70, 0, 1, 0, 3),
- PLL_FRACN_GP(498000000U, 83, 0, 1, 0, 4),
+ PLL_FRACN_GP(560000000U, 140, 0, 1, 0, 6),
+ PLL_FRACN_GP(498000000U, 166, 0, 1, 0, 8),
PLL_FRACN_GP(484000000U, 121, 0, 1, 0, 6),
PLL_FRACN_GP(445333333U, 167, 0, 1, 0, 9),
- PLL_FRACN_GP(400000000U, 50, 0, 1, 0, 3),
- PLL_FRACN_GP(393216000U, 81, 92, 100, 0, 5)
+ PLL_FRACN_GP(400000000U, 200, 0, 1, 0, 12),
+ PLL_FRACN_GP(393216000U, 163, 84, 100, 0, 10)
};
struct imx_fracn_gppll_clk imx_fracn_gppll = {
--
2.37.1
From: Peng Fan <[email protected]>
When programming PLL, should disable Hardware control select to make PLL
controlled by register, not hardware inputs through OSCPLL.
Fixes: 1b26cb8a77a4 ("clk: imx: support fracn gppll")
Signed-off-by: Peng Fan <[email protected]>
---
drivers/clk/imx/clk-fracn-gppll.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/clk/imx/clk-fracn-gppll.c b/drivers/clk/imx/clk-fracn-gppll.c
index ec50c41e2a4c..f6674110a88e 100644
--- a/drivers/clk/imx/clk-fracn-gppll.c
+++ b/drivers/clk/imx/clk-fracn-gppll.c
@@ -15,6 +15,7 @@
#include "clk.h"
#define PLL_CTRL 0x0
+#define HW_CTRL_SEL BIT(16)
#define CLKMUX_BYPASS BIT(2)
#define CLKMUX_EN BIT(1)
#define POWERUP_MASK BIT(0)
@@ -193,6 +194,11 @@ static int clk_fracn_gppll_set_rate(struct clk_hw *hw, unsigned long drate,
rate = imx_get_pll_settings(pll, drate);
+ /* Hardware control select disable. PLL is control by register */
+ tmp = readl_relaxed(pll->base + PLL_CTRL);
+ tmp &= ~HW_CTRL_SEL;
+ writel_relaxed(tmp, pll->base + PLL_CTRL);
+
/* Disable output */
tmp = readl_relaxed(pll->base + PLL_CTRL);
tmp &= ~CLKMUX_EN;
--
2.37.1
From: Jacky Bai <[email protected]>
Add 300MHz frequency config support on i.MX93 PLL.
Reviewed-by: Ye Li <[email protected]>
Signed-off-by: Jacky Bai <[email protected]>
Signed-off-by: Peng Fan <[email protected]>
---
drivers/clk/imx/clk-fracn-gppll.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/clk/imx/clk-fracn-gppll.c b/drivers/clk/imx/clk-fracn-gppll.c
index e2633ad94640..c54f9999da04 100644
--- a/drivers/clk/imx/clk-fracn-gppll.c
+++ b/drivers/clk/imx/clk-fracn-gppll.c
@@ -85,7 +85,8 @@ static const struct imx_fracn_gppll_rate_table fracn_tbl[] = {
PLL_FRACN_GP(484000000U, 121, 0, 1, 0, 6),
PLL_FRACN_GP(445333333U, 167, 0, 1, 0, 9),
PLL_FRACN_GP(400000000U, 200, 0, 1, 0, 12),
- PLL_FRACN_GP(393216000U, 163, 84, 100, 0, 10)
+ PLL_FRACN_GP(393216000U, 163, 84, 100, 0, 10),
+ PLL_FRACN_GP(300000000U, 150, 0, 1, 0, 12)
};
struct imx_fracn_gppll_clk imx_fracn_gppll = {
--
2.37.1
From: Peng Fan <[email protected]>
Add mcore_booted boot parameter which could simplify AMP clock
management. To i.MX93, there is CCM(clock control Module) to generate
clock root clock, anatop(analog PLL module) to generate PLL, and LPCG
(clock gating) to gate clocks to peripherals. As below:
anatop->ccm->lpcg->peripheral
Linux handles the clock management and the auxiliary core is under
control of Linux. Although there is per hardware domain control for LPCG
and CCM, auxiliary core normally only use LPCG hardware domain control
to avoid linux gate off the clk to peripherals and leave CCM ana anatop
to Linux.
Reviewed-by: Ye Li <[email protected]>
Signed-off-by: Peng Fan <[email protected]>
---
drivers/clk/imx/clk-composite-93.c | 8 +++++++-
drivers/clk/imx/clk-imx93.c | 2 ++
2 files changed, 9 insertions(+), 1 deletion(-)
diff --git a/drivers/clk/imx/clk-composite-93.c b/drivers/clk/imx/clk-composite-93.c
index 74a66b0203e4..81164bdcd6cc 100644
--- a/drivers/clk/imx/clk-composite-93.c
+++ b/drivers/clk/imx/clk-composite-93.c
@@ -222,7 +222,7 @@ struct clk_hw *imx93_clk_composite_flags(const char *name, const char * const *p
hw = clk_hw_register_composite(NULL, name, parent_names, num_parents,
mux_hw, &clk_mux_ro_ops, div_hw,
&clk_divider_ro_ops, NULL, NULL, flags);
- } else {
+ } else if (!mcore_booted) {
gate = kzalloc(sizeof(*gate), GFP_KERNEL);
if (!gate)
goto fail;
@@ -238,6 +238,12 @@ struct clk_hw *imx93_clk_composite_flags(const char *name, const char * const *p
&imx93_clk_composite_divider_ops, gate_hw,
&imx93_clk_composite_gate_ops,
flags | CLK_SET_RATE_NO_REPARENT);
+ } else {
+ hw = clk_hw_register_composite(NULL, name, parent_names, num_parents,
+ mux_hw, &imx93_clk_composite_mux_ops, div_hw,
+ &imx93_clk_composite_divider_ops, NULL,
+ &imx93_clk_composite_gate_ops,
+ flags | CLK_SET_RATE_NO_REPARENT);
}
if (IS_ERR(hw))
diff --git a/drivers/clk/imx/clk-imx93.c b/drivers/clk/imx/clk-imx93.c
index 8d0974db6bfd..de1ed1d8ba54 100644
--- a/drivers/clk/imx/clk-imx93.c
+++ b/drivers/clk/imx/clk-imx93.c
@@ -352,6 +352,8 @@ static struct platform_driver imx93_clk_driver = {
},
};
module_platform_driver(imx93_clk_driver);
+module_param(mcore_booted, bool, 0444);
+MODULE_PARM_DESC(mcore_booted, "See Cortex-M core is booted or not");
MODULE_DESCRIPTION("NXP i.MX93 clock driver");
MODULE_LICENSE("GPL v2");
--
2.37.1
From: Peng Fan <[email protected]>
Add i.MX93 NIC, A55 and ARM PLL CLK.
Signed-off-by: Peng Fan <[email protected]>
---
include/dt-bindings/clock/imx93-clock.h | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/include/dt-bindings/clock/imx93-clock.h b/include/dt-bindings/clock/imx93-clock.h
index 8e02859d8ce2..35a1f62053a5 100644
--- a/include/dt-bindings/clock/imx93-clock.h
+++ b/include/dt-bindings/clock/imx93-clock.h
@@ -199,6 +199,10 @@
#define IMX93_CLK_MU1_B_GATE 194
#define IMX93_CLK_MU2_A_GATE 195
#define IMX93_CLK_MU2_B_GATE 196
-#define IMX93_CLK_END 197
+#define IMX93_CLK_NIC_AXI 197
+#define IMX93_CLK_ARM_PLL 198
+#define IMX93_CLK_A55_SEL 199
+#define IMX93_CLK_A55_CORE 200
+#define IMX93_CLK_END 201
#endif
--
2.37.1
From: Peng Fan <[email protected]>
The A55 clock logic as below:
A55_PLL ----------------->\
A55_SEL-->A55_CORE
A55_CCM_ROOT--->A55_GATE->/
Add A55 CPU clk to support freq change.
Add NIC CLK to reflect the clk status
Signed-off-by: Peng Fan <[email protected]>
---
drivers/clk/imx/clk-imx93.c | 17 +++++++++++++++--
1 file changed, 15 insertions(+), 2 deletions(-)
diff --git a/drivers/clk/imx/clk-imx93.c b/drivers/clk/imx/clk-imx93.c
index de1ed1d8ba54..0edc836b3768 100644
--- a/drivers/clk/imx/clk-imx93.c
+++ b/drivers/clk/imx/clk-imx93.c
@@ -33,6 +33,7 @@ static u32 share_count_sai2;
static u32 share_count_sai3;
static u32 share_count_mub;
+static const char * const a55_core_sels[] = {"a55_alt", "arm_pll"};
static const char *parent_names[MAX_SEL][4] = {
{"osc_24m", "sys_pll_pfd0_div2", "sys_pll_pfd1_div2", "video_pll"},
{"osc_24m", "sys_pll_pfd0_div2", "sys_pll_pfd1_div2", "sys_pll_pfd2_div2"},
@@ -55,7 +56,7 @@ static const struct imx93_clk_root {
/* a55/m33/bus critical clk for system run */
{ IMX93_CLK_A55_PERIPH, "a55_periph_root", 0x0000, FAST_SEL, CLK_IS_CRITICAL },
{ IMX93_CLK_A55_MTR_BUS, "a55_mtr_bus_root", 0x0080, LOW_SPEED_IO_SEL, CLK_IS_CRITICAL },
- { IMX93_CLK_A55, "a55_root", 0x0100, FAST_SEL, CLK_IS_CRITICAL },
+ { IMX93_CLK_A55, "a55_alt_root", 0x0100, FAST_SEL, CLK_IS_CRITICAL },
{ IMX93_CLK_M33, "m33_root", 0x0180, LOW_SPEED_IO_SEL, CLK_IS_CRITICAL },
{ IMX93_CLK_BUS_WAKEUP, "bus_wakeup_root", 0x0280, LOW_SPEED_IO_SEL, CLK_IS_CRITICAL },
{ IMX93_CLK_BUS_AON, "bus_aon_root", 0x0300, LOW_SPEED_IO_SEL, CLK_IS_CRITICAL },
@@ -117,6 +118,7 @@ static const struct imx93_clk_root {
{ IMX93_CLK_HSIO_USB_TEST_60M, "hsio_usb_test_60m_root", 0x1f00, LOW_SPEED_IO_SEL, },
{ IMX93_CLK_HSIO_ACSCAN_80M, "hsio_acscan_80m_root", 0x1f80, LOW_SPEED_IO_SEL, },
{ IMX93_CLK_HSIO_ACSCAN_480M, "hsio_acscan_480m_root", 0x2000, MISC_SEL, },
+ { IMX93_CLK_NIC_AXI, "nic_axi_root", 0x2080, FAST_SEL, CLK_IS_CRITICAL, },
{ IMX93_CLK_ML_APB, "ml_apb_root", 0x2180, LOW_SPEED_IO_SEL, },
{ IMX93_CLK_ML, "ml_root", 0x2200, FAST_SEL, },
{ IMX93_CLK_MEDIA_AXI, "media_axi_root", 0x2280, FAST_SEL, },
@@ -153,7 +155,7 @@ static const struct imx93_clk_ccgr {
unsigned long flags;
u32 *shared_count;
} ccgr_array[] = {
- { IMX93_CLK_A55_GATE, "a55", "a55_root", 0x8000, },
+ { IMX93_CLK_A55_GATE, "a55_alt", "a55_alt_root", 0x8000, },
/* M33 critical clk for system run */
{ IMX93_CLK_CM33_GATE, "cm33", "m33_root", 0x8040, CLK_IS_CRITICAL },
{ IMX93_CLK_ADC1_GATE, "adc1", "adc_root", 0x82c0, },
@@ -291,6 +293,9 @@ static int imx93_clocks_probe(struct platform_device *pdev)
if (WARN_ON(!anatop_base))
return -ENOMEM;
+ clks[IMX93_CLK_ARM_PLL] = imx_clk_fracn_gppll_integer("arm_pll", "osc_24m",
+ anatop_base + 0x1000,
+ &imx_fracn_gppll_integer);
clks[IMX93_CLK_AUDIO_PLL] = imx_clk_fracn_gppll("audio_pll", "osc_24m", anatop_base + 0x1200,
&imx_fracn_gppll);
clks[IMX93_CLK_VIDEO_PLL] = imx_clk_fracn_gppll("video_pll", "osc_24m", anatop_base + 0x1400,
@@ -318,6 +323,14 @@ static int imx93_clocks_probe(struct platform_device *pdev)
ccgr->shared_count);
}
+ clks[IMX93_CLK_A55_SEL] = imx_clk_hw_mux2("a55_sel", base + 0x4820, 0, 1, a55_core_sels,
+ ARRAY_SIZE(a55_core_sels));
+ clks[IMX93_CLK_A55_CORE] = imx_clk_hw_cpu("a55_core", "a55_sel",
+ clks[IMX93_CLK_A55_SEL]->clk,
+ clks[IMX93_CLK_A55_SEL]->clk,
+ clks[IMX93_CLK_ARM_PLL]->clk,
+ clks[IMX93_CLK_A55_GATE]->clk);
+
imx_check_clk_hws(clks, IMX93_CLK_END);
ret = of_clk_add_hw_provider(np, of_clk_hw_onecell_get, clk_hw_data);
--
2.37.1
From: Peng Fan <[email protected]>
The fracn gppll could be configured in FRAC or INTEGER mode during
hardware design. The current driver only support FRAC mode, while
this patch introduces INTEGER support. When the PLL is INTEGER pll,
there is no mfn, mfd, the calculation is as below:
Fvco_clk = (Fref / DIV[RDIV] ) * DIV[MFI]
Fclko_odiv = Fvco_clk / DIV[ODIV]
In this patch, we reuse the FRAC pll logic with some condition check to
simplify the driver
Signed-off-by: Peng Fan <[email protected]>
---
drivers/clk/imx/clk-fracn-gppll.c | 68 +++++++++++++++++++++++++++----
drivers/clk/imx/clk.h | 7 ++++
2 files changed, 68 insertions(+), 7 deletions(-)
diff --git a/drivers/clk/imx/clk-fracn-gppll.c b/drivers/clk/imx/clk-fracn-gppll.c
index f6674110a88e..e2633ad94640 100644
--- a/drivers/clk/imx/clk-fracn-gppll.c
+++ b/drivers/clk/imx/clk-fracn-gppll.c
@@ -53,11 +53,22 @@
.odiv = (_odiv), \
}
+#define PLL_FRACN_GP_INTEGER(_rate, _mfi, _rdiv, _odiv) \
+ { \
+ .rate = (_rate), \
+ .mfi = (_mfi), \
+ .mfn = 0, \
+ .mfd = 0, \
+ .rdiv = (_rdiv), \
+ .odiv = (_odiv), \
+ }
+
struct clk_fracn_gppll {
struct clk_hw hw;
void __iomem *base;
const struct imx_fracn_gppll_rate_table *rate_table;
int rate_count;
+ u32 flags;
};
/*
@@ -83,6 +94,24 @@ struct imx_fracn_gppll_clk imx_fracn_gppll = {
};
EXPORT_SYMBOL_GPL(imx_fracn_gppll);
+/*
+ * Fvco = (Fref / rdiv) * MFI
+ * Fout = Fvco / odiv
+ * The (Fref / rdiv) should be in range 20MHz to 40MHz
+ * The Fvco should be in range 2.5Ghz to 5Ghz
+ */
+static const struct imx_fracn_gppll_rate_table int_tbl[] = {
+ PLL_FRACN_GP_INTEGER(1700000000U, 141, 1, 2),
+ PLL_FRACN_GP_INTEGER(1400000000U, 175, 1, 3),
+ PLL_FRACN_GP_INTEGER(900000000U, 150, 1, 4),
+};
+
+struct imx_fracn_gppll_clk imx_fracn_gppll_integer = {
+ .rate_table = int_tbl,
+ .rate_count = ARRAY_SIZE(int_tbl),
+};
+EXPORT_SYMBOL_GPL(imx_fracn_gppll_integer);
+
static inline struct clk_fracn_gppll *to_clk_fracn_gppll(struct clk_hw *hw)
{
return container_of(hw, struct clk_fracn_gppll, hw);
@@ -169,9 +198,15 @@ static unsigned long clk_fracn_gppll_recalc_rate(struct clk_hw *hw, unsigned lon
break;
}
- /* Fvco = Fref * (MFI + MFN / MFD) */
- fvco = fvco * mfi * mfd + fvco * mfn;
- do_div(fvco, mfd * rdiv * odiv);
+ if (pll->flags & CLK_FRACN_GPPLL_INTEGER) {
+ /* Fvco = (Fref / rdiv) * MFI */
+ fvco = fvco * mfi;
+ do_div(fvco, rdiv * odiv);
+ } else {
+ /* Fvco = (Fref / rdiv) * (MFI + MFN / MFD) */
+ fvco = fvco * mfi * mfd + fvco * mfn;
+ do_div(fvco, mfd * rdiv * odiv);
+ }
return (unsigned long)fvco;
}
@@ -215,8 +250,10 @@ static int clk_fracn_gppll_set_rate(struct clk_hw *hw, unsigned long drate,
pll_div = FIELD_PREP(PLL_RDIV_MASK, rate->rdiv) | rate->odiv |
FIELD_PREP(PLL_MFI_MASK, rate->mfi);
writel_relaxed(pll_div, pll->base + PLL_DIV);
- writel_relaxed(rate->mfd, pll->base + PLL_DENOMINATOR);
- writel_relaxed(FIELD_PREP(PLL_MFN_MASK, rate->mfn), pll->base + PLL_NUMERATOR);
+ if (pll->flags & CLK_FRACN_GPPLL_FRACN) {
+ writel_relaxed(rate->mfd, pll->base + PLL_DENOMINATOR);
+ writel_relaxed(FIELD_PREP(PLL_MFN_MASK, rate->mfn), pll->base + PLL_NUMERATOR);
+ }
/* Wait for 5us according to fracn mode pll doc */
udelay(5);
@@ -300,8 +337,10 @@ static const struct clk_ops clk_fracn_gppll_ops = {
.set_rate = clk_fracn_gppll_set_rate,
};
-struct clk_hw *imx_clk_fracn_gppll(const char *name, const char *parent_name, void __iomem *base,
- const struct imx_fracn_gppll_clk *pll_clk)
+static struct clk_hw *_imx_clk_fracn_gppll(const char *name, const char *parent_name,
+ void __iomem *base,
+ const struct imx_fracn_gppll_clk *pll_clk,
+ u32 pll_flags)
{
struct clk_fracn_gppll *pll;
struct clk_hw *hw;
@@ -322,6 +361,7 @@ struct clk_hw *imx_clk_fracn_gppll(const char *name, const char *parent_name, vo
pll->hw.init = &init;
pll->rate_table = pll_clk->rate_table;
pll->rate_count = pll_clk->rate_count;
+ pll->flags = pll_flags;
hw = &pll->hw;
@@ -334,4 +374,18 @@ struct clk_hw *imx_clk_fracn_gppll(const char *name, const char *parent_name, vo
return hw;
}
+
+struct clk_hw *imx_clk_fracn_gppll(const char *name, const char *parent_name, void __iomem *base,
+ const struct imx_fracn_gppll_clk *pll_clk)
+{
+ return _imx_clk_fracn_gppll(name, parent_name, base, pll_clk, CLK_FRACN_GPPLL_FRACN);
+}
EXPORT_SYMBOL_GPL(imx_clk_fracn_gppll);
+
+struct clk_hw *imx_clk_fracn_gppll_integer(const char *name, const char *parent_name,
+ void __iomem *base,
+ const struct imx_fracn_gppll_clk *pll_clk)
+{
+ return _imx_clk_fracn_gppll(name, parent_name, base, pll_clk, CLK_FRACN_GPPLL_INTEGER);
+}
+EXPORT_SYMBOL_GPL(imx_clk_fracn_gppll_integer);
diff --git a/drivers/clk/imx/clk.h b/drivers/clk/imx/clk.h
index 0259a75ddf35..ca1f75eb3197 100644
--- a/drivers/clk/imx/clk.h
+++ b/drivers/clk/imx/clk.h
@@ -73,6 +73,9 @@ extern struct imx_pll14xx_clk imx_1416x_pll;
extern struct imx_pll14xx_clk imx_1443x_pll;
extern struct imx_pll14xx_clk imx_1443x_dram_pll;
+#define CLK_FRACN_GPPLL_INTEGER BIT(0)
+#define CLK_FRACN_GPPLL_FRACN BIT(1)
+
/* NOTE: Rate table should be kept sorted in descending order. */
struct imx_fracn_gppll_rate_table {
unsigned int rate;
@@ -91,8 +94,12 @@ struct imx_fracn_gppll_clk {
struct clk_hw *imx_clk_fracn_gppll(const char *name, const char *parent_name, void __iomem *base,
const struct imx_fracn_gppll_clk *pll_clk);
+struct clk_hw *imx_clk_fracn_gppll_integer(const char *name, const char *parent_name,
+ void __iomem *base,
+ const struct imx_fracn_gppll_clk *pll_clk);
extern struct imx_fracn_gppll_clk imx_fracn_gppll;
+extern struct imx_fracn_gppll_clk imx_fracn_gppll_integer;
#define imx_clk_cpu(name, parent_name, div, mux, pll, step) \
to_clk(imx_clk_hw_cpu(name, parent_name, div, mux, pll, step))
--
2.37.1
On 03/04/2023 09:13, Peng Fan (OSS) wrote:
> From: Peng Fan <[email protected]>
>
> Add i.MX93 NIC, A55 and ARM PLL CLK.
>
Fix subject in all your patchsets.
Best regards,
Krzysztof
> Subject: Re: [PATCH V2 6/7] dt-binding: clock: imx93: add NIC, A55 and ARM
> PLL CLK
>
> On 03/04/2023 09:13, Peng Fan (OSS) wrote:
> > From: Peng Fan <[email protected]>
> >
> > Add i.MX93 NIC, A55 and ARM PLL CLK.
> >
>
> Fix subject in all your patchsets.
My bad, already fixed and posted new version patches.
Thanks,
Peng.
>
> Best regards,
> Krzysztof