Clock delay settings are not defined for 400KHz, so add frequency check
to skip calling the clock delay settings when frequency is <=400KHz.
Signed-off-by: Sai Krishna Potthuri <[email protected]>
---
drivers/mmc/host/sdhci-of-arasan.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/mmc/host/sdhci-of-arasan.c b/drivers/mmc/host/sdhci-of-arasan.c
index c3fecb8ba66e..d9a29c346745 100644
--- a/drivers/mmc/host/sdhci-of-arasan.c
+++ b/drivers/mmc/host/sdhci-of-arasan.c
@@ -413,7 +413,7 @@ static void sdhci_arasan_set_clock(struct sdhci_host *host, unsigned int clock)
}
/* Set the Input and Output Clock Phase Delays */
- if (clk_data->set_clk_delays)
+ if (clk_data->set_clk_delays && clock > PHY_CLK_TOO_SLOW_HZ)
clk_data->set_clk_delays(host);
if (sdhci_arasan->internal_phy_reg && clock >= MIN_PHY_CLK_HZ) {
--
2.25.1
On 3/04/23 13:25, Sai Krishna Potthuri wrote:
> Clock delay settings are not defined for 400KHz, so add frequency check
> to skip calling the clock delay settings when frequency is <=400KHz.
>
> Signed-off-by: Sai Krishna Potthuri <[email protected]>
Acked-by: Adrian Hunter <[email protected]>
> ---
> drivers/mmc/host/sdhci-of-arasan.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/mmc/host/sdhci-of-arasan.c b/drivers/mmc/host/sdhci-of-arasan.c
> index c3fecb8ba66e..d9a29c346745 100644
> --- a/drivers/mmc/host/sdhci-of-arasan.c
> +++ b/drivers/mmc/host/sdhci-of-arasan.c
> @@ -413,7 +413,7 @@ static void sdhci_arasan_set_clock(struct sdhci_host *host, unsigned int clock)
> }
>
> /* Set the Input and Output Clock Phase Delays */
> - if (clk_data->set_clk_delays)
> + if (clk_data->set_clk_delays && clock > PHY_CLK_TOO_SLOW_HZ)
> clk_data->set_clk_delays(host);
>
> if (sdhci_arasan->internal_phy_reg && clock >= MIN_PHY_CLK_HZ) {