Function mpc85xx_exclude_device() is installed and used only when
pci_with_uli is fsl_pci_primary. So replace check for pci_with_uli by
fsl_pci_primary in mpc85xx_exclude_device() and move pci_with_uli variable
declaration into function mpc85xx_ds_uli_init() where it is used.
Signed-off-by: Pali Rohár <[email protected]>
---
arch/powerpc/platforms/85xx/mpc85xx_ds.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ds.c b/arch/powerpc/platforms/85xx/mpc85xx_ds.c
index ed7b71d55b10..0c905a838942 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_ds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_ds.c
@@ -108,12 +108,10 @@ void __init mpc85xx_ds_pic_init(void)
}
#ifdef CONFIG_PCI
-static struct device_node *pci_with_uli;
-
static int mpc85xx_exclude_device(struct pci_controller *hose,
u_char bus, u_char devfn)
{
- if (hose->dn == pci_with_uli)
+ if (hose->dn == fsl_pci_primary)
return uli_exclude_device(hose, bus, devfn);
return PCIBIOS_SUCCESSFUL;
@@ -124,6 +122,7 @@ static void __init mpc85xx_ds_uli_init(void)
{
#ifdef CONFIG_PCI
struct device_node *node;
+ struct device_node *pci_with_uli;
/* See if we have a ULI under the primary */
--
2.20.1