This patch extends the test_cpuset_prs.sh test script to support testing
the new isolcpus partition by adding new tests for specifically for
isolcpus partition. In addition, the following changes are also made:
1) Remove the first column of the TEST_MATRIX as it is always the same
and so is redundant.
2) Add a new C1 cgroup directory for testing and add that column to the
TEST_MATRIX.
3) Add support for the .__DEBUG__.cpuset.cpus.subpartitions file if
"cgroup_debug" kernel boot option is specified and a new column
into TEST_MATRIX for testing against this cgroup control file.
4) Add another column to for the list of expected isolated CPUs and
compare it with the actual value by looking at the state of
/sys/kernel/debug/sched/domains.
Signed-off-by: Waiman Long <[email protected]>
---
.../selftests/cgroup/test_cpuset_prs.sh | 376 ++++++++++++------
1 file changed, 258 insertions(+), 118 deletions(-)
diff --git a/tools/testing/selftests/cgroup/test_cpuset_prs.sh b/tools/testing/selftests/cgroup/test_cpuset_prs.sh
index 2b5215cc599f..7fa2bfe6c1c0 100755
--- a/tools/testing/selftests/cgroup/test_cpuset_prs.sh
+++ b/tools/testing/selftests/cgroup/test_cpuset_prs.sh
@@ -23,18 +23,18 @@ WAIT_INOTIFY=$(cd $(dirname $0); pwd)/wait_inotify
CGROUP2=$(mount -t cgroup2 | head -1 | awk -e '{print $3}')
[[ -n "$CGROUP2" ]] || skip_test "Cgroup v2 mount point not found!"
-CPUS=$(lscpu | grep "^CPU(s):" | sed -e "s/.*:[[:space:]]*//")
-[[ $CPUS -lt 8 ]] && skip_test "Test needs at least 8 cpus available!"
+NR_CPUS=$(lscpu | grep "^CPU(s):" | sed -e "s/.*:[[:space:]]*//")
+[[ $NR_CPUS -lt 8 ]] && skip_test "Test needs at least 8 cpus available!"
# Set verbose flag and delay factor
PROG=$1
-VERBOSE=
+VERBOSE=0
DELAY_FACTOR=1
SCHED_DEBUG=
while [[ "$1" = -* ]]
do
case "$1" in
- -v) VERBOSE=1
+ -v) ((VERBOSE++))
# Enable sched/verbose can slow thing down
[[ $DELAY_FACTOR -eq 1 ]] &&
DELAY_FACTOR=2
@@ -52,7 +52,7 @@ do
done
# Set sched verbose flag if available when "-v" option is specified
-if [[ -n "$VERBOSE" && -d /sys/kernel/debug/sched ]]
+if [[ $VERBOSE -gt 0 && -d /sys/kernel/debug/sched ]]
then
# Used to restore the original setting during cleanup
SCHED_DEBUG=$(cat /sys/kernel/debug/sched/verbose)
@@ -103,7 +103,7 @@ test_partition()
[[ $? -eq 0 ]] || exit 1
ACTUAL_VAL=$(cat cpuset.cpus.partition)
[[ $ACTUAL_VAL != $EXPECTED_VAL ]] && {
- echo "cpuset.cpus.partition: expect $EXPECTED_VAL, found $EXPECTED_VAL"
+ echo "cpuset.cpus.partition: expect $EXPECTED_VAL, found $ACTUAL_VAL"
echo "Test FAILED"
exit 1
}
@@ -114,7 +114,7 @@ test_effective_cpus()
EXPECTED_VAL=$1
ACTUAL_VAL=$(cat cpuset.cpus.effective)
[[ "$ACTUAL_VAL" != "$EXPECTED_VAL" ]] && {
- echo "cpuset.cpus.effective: expect '$EXPECTED_VAL', found '$EXPECTED_VAL'"
+ echo "cpuset.cpus.effective: expect '$EXPECTED_VAL', found '$ACTUAL_VAL'"
echo "Test FAILED"
exit 1
}
@@ -204,124 +204,175 @@ test_isolated()
# Cgroup test hierarchy
#
# test -- A1 -- A2 -- A3
-# \- B1
+# +- B1
+# +- C1
#
-# P<v> = set cpus.partition (0:member, 1:root, 2:isolated, -1:root invalid)
+# P<v> = set cpus.partition (0:member, 1:root, 2:isolated, 3: isolcpus)
# C<l> = add cpu-list
# S<p> = use prefix in subtree_control
# T = put a task into cgroup
-# O<c>-<v> = Write <v> to CPU online file of <c>
+# O<c>=<v> = Write <v> to CPU online file of <c>
#
SETUP_A123_PARTITIONS="C1-3:P1:S+ C2-3:P1:S+ C3:P1"
TEST_MATRIX=(
- # test old-A1 old-A2 old-A3 old-B1 new-A1 new-A2 new-A3 new-B1 fail ECPUs Pstate
- # ---- ------ ------ ------ ------ ------ ------ ------ ------ ---- ----- ------
- " S+ C0-1 . . C2-3 S+ C4-5 . . 0 A2:0-1"
- " S+ C0-1 . . C2-3 P1 . . . 0 "
- " S+ C0-1 . . C2-3 P1:S+ C0-1:P1 . . 0 "
- " S+ C0-1 . . C2-3 P1:S+ C1:P1 . . 0 "
- " S+ C0-1:S+ . . C2-3 . . . P1 0 "
- " S+ C0-1:P1 . . C2-3 S+ C1 . . 0 "
- " S+ C0-1:P1 . . C2-3 S+ C1:P1 . . 0 "
- " S+ C0-1:P1 . . C2-3 S+ C1:P1 . P1 0 "
- " S+ C0-1:P1 . . C2-3 C4-5 . . . 0 A1:4-5"
- " S+ C0-1:P1 . . C2-3 S+:C4-5 . . . 0 A1:4-5"
- " S+ C0-1 . . C2-3:P1 . . . C2 0 "
- " S+ C0-1 . . C2-3:P1 . . . C4-5 0 B1:4-5"
- " S+ C0-3:P1:S+ C2-3:P1 . . . . . . 0 A1:0-1,A2:2-3"
- " S+ C0-3:P1:S+ C2-3:P1 . . C1-3 . . . 0 A1:1,A2:2-3"
- " S+ C2-3:P1:S+ C3:P1 . . C3 . . . 0 A1:,A2:3 A1:P1,A2:P1"
- " S+ C2-3:P1:S+ C3:P1 . . C3 P0 . . 0 A1:3,A2:3 A1:P1,A2:P0"
- " S+ C2-3:P1:S+ C2:P1 . . C2-4 . . . 0 A1:3-4,A2:2"
- " S+ C2-3:P1:S+ C3:P1 . . C3 . . C0-2 0 A1:,B1:0-2 A1:P1,A2:P1"
- " S+ $SETUP_A123_PARTITIONS . C2-3 . . . 0 A1:,A2:2,A3:3 A1:P1,A2:P1,A3:P1"
+ # old-A1 old-A2 old-A3 old-B1 new-A1 new-A2 new-A3 new-B1 new-C1 fail ECPUs Pstate PCPUS ISOLCPUS
+ # ------ ------ ------ ------ ------ ------ ------ ------ ------ ---- ----- ------ ----- --------
+ " C0-1 . . C2-3 S+ C4-5 . . . 0 A2:0-1"
+ " C0-1 . . C2-3 P1 . . . . 0 "
+ " C0-1 . . C2-3 P1:S+ C0-1:P1 . . . 0 "
+ " C0-1 . . C2-3 P1:S+ C1:P1 . . . 0 "
+ " C0-1:S+ . . C2-3 . . . P1 . 0 "
+ " C0-1:P1 . . C2-3 S+ C1 . . . 0 "
+ " C0-1:P1 . . C2-3 S+ C1:P1 . . . 0 "
+ " C0-1:P1 . . C2-3 S+ C1:P1 . P1 . 0 "
+ " C0-1:P1 . . C2-3 C4-5 . . . . 0 A1:4-5"
+ " C0-1:P1 . . C2-3 S+:C4-5 . . . . 0 A1:4-5"
+ " C0-1 . . C2-3:P1 . . . C2 . 0 "
+ " C0-1 . . C2-3:P1 . . . C4-5 . 0 B1:4-5"
+ "C0-3:P1:S+ C2-3:P1 . . . . . . . 0 A1:0-1,A2:2-3"
+ "C0-3:P1:S+ C2-3:P1 . . C1-3 . . . . 0 A1:1,A2:2-3"
+ "C2-3:P1:S+ C3:P1 . . C3 . . . . 0 A1:,A2:3 A1:P1,A2:P1"
+ "C2-3:P1:S+ C3:P1 . . C3 P0 . . . 0 A1:3,A2:3 A1:P1,A2:P0"
+ "C2-3:P1:S+ C2:P1 . . C2-4 . . . . 0 A1:3-4,A2:2"
+ "C2-3:P1:S+ C3:P1 . . C3 . . C0-2 . 0 A1:,B1:0-2 A1:P1,A2:P1"
+ "$SETUP_A123_PARTITIONS . C2-3 . . . . 0 A1:,A2:2,A3:3 A1:P1,A2:P1,A3:P1"
# CPU offlining cases:
- " S+ C0-1 . . C2-3 S+ C4-5 . O2-0 0 A1:0-1,B1:3"
- " S+ C0-3:P1:S+ C2-3:P1 . . O2-0 . . . 0 A1:0-1,A2:3"
- " S+ C0-3:P1:S+ C2-3:P1 . . O2-0 O2-1 . . 0 A1:0-1,A2:2-3"
- " S+ C0-3:P1:S+ C2-3:P1 . . O1-0 . . . 0 A1:0,A2:2-3"
- " S+ C0-3:P1:S+ C2-3:P1 . . O1-0 O1-1 . . 0 A1:0-1,A2:2-3"
- " S+ C2-3:P1:S+ C3:P1 . . O3-0 O3-1 . . 0 A1:2,A2:3 A1:P1,A2:P1"
- " S+ C2-3:P1:S+ C3:P2 . . O3-0 O3-1 . . 0 A1:2,A2:3 A1:P1,A2:P2"
- " S+ C2-3:P1:S+ C3:P1 . . O2-0 O2-1 . . 0 A1:2,A2:3 A1:P1,A2:P1"
- " S+ C2-3:P1:S+ C3:P2 . . O2-0 O2-1 . . 0 A1:2,A2:3 A1:P1,A2:P2"
- " S+ C2-3:P1:S+ C3:P1 . . O2-0 . . . 0 A1:,A2:3 A1:P1,A2:P1"
- " S+ C2-3:P1:S+ C3:P1 . . O3-0 . . . 0 A1:2,A2: A1:P1,A2:P1"
- " S+ C2-3:P1:S+ C3:P1 . . T:O2-0 . . . 0 A1:3,A2:3 A1:P1,A2:P-1"
- " S+ C2-3:P1:S+ C3:P1 . . . T:O3-0 . . 0 A1:2,A2:2 A1:P1,A2:P-1"
- " S+ $SETUP_A123_PARTITIONS . O1-0 . . . 0 A1:,A2:2,A3:3 A1:P1,A2:P1,A3:P1"
- " S+ $SETUP_A123_PARTITIONS . O2-0 . . . 0 A1:1,A2:,A3:3 A1:P1,A2:P1,A3:P1"
- " S+ $SETUP_A123_PARTITIONS . O3-0 . . . 0 A1:1,A2:2,A3: A1:P1,A2:P1,A3:P1"
- " S+ $SETUP_A123_PARTITIONS . T:O1-0 . . . 0 A1:2-3,A2:2-3,A3:3 A1:P1,A2:P-1,A3:P-1"
- " S+ $SETUP_A123_PARTITIONS . . T:O2-0 . . 0 A1:1,A2:3,A3:3 A1:P1,A2:P1,A3:P-1"
- " S+ $SETUP_A123_PARTITIONS . . . T:O3-0 . 0 A1:1,A2:2,A3:2 A1:P1,A2:P1,A3:P-1"
- " S+ $SETUP_A123_PARTITIONS . T:O1-0 O1-1 . . 0 A1:1,A2:2,A3:3 A1:P1,A2:P1,A3:P1"
- " S+ $SETUP_A123_PARTITIONS . . T:O2-0 O2-1 . 0 A1:1,A2:2,A3:3 A1:P1,A2:P1,A3:P1"
- " S+ $SETUP_A123_PARTITIONS . . . T:O3-0 O3-1 0 A1:1,A2:2,A3:3 A1:P1,A2:P1,A3:P1"
- " S+ $SETUP_A123_PARTITIONS . T:O1-0 O2-0 O1-1 . 0 A1:1,A2:,A3:3 A1:P1,A2:P1,A3:P1"
- " S+ $SETUP_A123_PARTITIONS . T:O1-0 O2-0 O2-1 . 0 A1:2-3,A2:2-3,A3:3 A1:P1,A2:P-1,A3:P-1"
-
- # test old-A1 old-A2 old-A3 old-B1 new-A1 new-A2 new-A3 new-B1 fail ECPUs Pstate
- # ---- ------ ------ ------ ------ ------ ------ ------ ------ ---- ----- ------
+ " C0-1 . . C2-3 S+ C4-5 . O2=0 . 0 A1:0-1,B1:3"
+ "C0-3:P1:S+ C2-3:P1 . . O2=0 . . . . 0 A1:0-1,A2:3"
+ "C0-3:P1:S+ C2-3:P1 . . O2=0 O2=1 . . . 0 A1:0-1,A2:2-3"
+ "C0-3:P1:S+ C2-3:P1 . . O1=0 . . . . 0 A1:0,A2:2-3"
+ "C0-3:P1:S+ C2-3:P1 . . O1=0 O1=1 . . . 0 A1:0-1,A2:2-3"
+ "C2-3:P1:S+ C3:P1 . . O3=0 O3=1 . . . 0 A1:2,A2:3 A1:P1,A2:P1"
+ "C2-3:P1:S+ C3:P2 . . O3=0 O3=1 . . . 0 A1:2,A2:3 A1:P1,A2:P2"
+ "C2-3:P1:S+ C3:P1 . . O2=0 O2=1 . . . 0 A1:2,A2:3 A1:P1,A2:P1"
+ "C2-3:P1:S+ C3:P2 . . O2=0 O2=1 . . . 0 A1:2,A2:3 A1:P1,A2:P2"
+ "C2-3:P1:S+ C3:P1 . . O2=0 . . . . 0 A1:,A2:3 A1:P1,A2:P1"
+ "C2-3:P1:S+ C3:P1 . . O3=0 . . . . 0 A1:2,A2: A1:P1,A2:P1"
+ "C2-3:P1:S+ C3:P1 . . T:O2=0 . . . . 0 A1:3,A2:3 A1:P1,A2:P-1"
+ "C2-3:P1:S+ C3:P1 . . . T:O3=0 . . . 0 A1:2,A2:2 A1:P1,A2:P-1"
+ "$SETUP_A123_PARTITIONS . O1=0 . . . . 0 A1:,A2:2,A3:3 A1:P1,A2:P1,A3:P1"
+ "$SETUP_A123_PARTITIONS . O2=0 . . . . 0 A1:1,A2:,A3:3 A1:P1,A2:P1,A3:P1"
+ "$SETUP_A123_PARTITIONS . O3=0 . . . . 0 A1:1,A2:2,A3: A1:P1,A2:P1,A3:P1"
+ "$SETUP_A123_PARTITIONS . T:O1=0 . . . . 0 A1:2-3,A2:2-3,A3:3 A1:P1,A2:P-1,A3:P-1"
+ "$SETUP_A123_PARTITIONS . . T:O2=0 . . . 0 A1:1,A2:3,A3:3 A1:P1,A2:P1,A3:P-1"
+ "$SETUP_A123_PARTITIONS . . . T:O3=0 . . 0 A1:1,A2:2,A3:2 A1:P1,A2:P1,A3:P-1"
+ "$SETUP_A123_PARTITIONS . T:O1=0 O1=1 . . . 0 A1:1,A2:2,A3:3 A1:P1,A2:P1,A3:P1"
+ "$SETUP_A123_PARTITIONS . . T:O2=0 O2=1 . . 0 A1:1,A2:2,A3:3 A1:P1,A2:P1,A3:P1"
+ "$SETUP_A123_PARTITIONS . . . T:O3=0 O3=1 . 0 A1:1,A2:2,A3:3 A1:P1,A2:P1,A3:P1"
+ "$SETUP_A123_PARTITIONS . T:O1=0 O2=0 O1=1 . . 0 A1:1,A2:,A3:3 A1:P1,A2:P1,A3:P1"
+ "$SETUP_A123_PARTITIONS . T:O1=0 O2=0 O2=1 . . 0 A1:2-3,A2:2-3,A3:3 A1:P1,A2:P-1,A3:P-1"
+
+ # old-A1 old-A2 old-A3 old-B1 new-A1 new-A2 new-A3 new-B1 new-C1 fail ECPUs Pstate PCPUS ISOLCPUS
+ # ------ ------ ------ ------ ------ ------ ------ ------ ------ ---- ----- ------ ----- --------
+ #
+ # isolcpus partition tests
+ #
+
+ # isolcpus partition can have empty cpuset.cpus & effective cpus
+ " . . . P3 . . . . . 0 B1: B1:P3"
+
+ # isolcpus partition is not exclusive
+ " C1-2 . . C3:P3 C1-3:S+ C3 . . . 0 A1:1-2,A2:1-2,B1:3 B1:P3"
+ " C1-3 . . C3 . . . P3 . 0 A1:1-2,B1:3 B1:P3"
+
+ # Only 1 isolcpus partition is allowed
+ " . . . C3:P3 C1:P3 . . . . 0 A1:1,B1:3 A1:P-3,B1:P3"
+
+ # Isolated partition can pull isolated cpus from isolcpus partition
+ " C1-3:S+ C3 . C3:P3 . P2 . . . 0 A1:1-2,A2:3,B1: A2:P2,B1:P3 .:3,B1:3 3"
+ " C1-3:S+ C3 . C3:P3 . P2 . C2-3 . 0 A1:1,A2:3,B1:2 A2:P2,B1:P3 .:2-3,B1:3 2-3"
+
+ # Isolated partition becomes invalid if cpu update fails pulling
+ " C1-3:S+ C3 . C3:P3 . P2:C2-3 . . . 0 A1:1-2,A2:2,B1:3 A2:P-2,B1:P3 .:3,B1: 3"
+ " C1-3:S+ C3 . C3:P3 . P2 . C1 . 0 A1:2-3,A2:3,B1:1 A2:P-2,B1:P3 .:1,B1: 1"
+
+ # Once isolated partition pulls cpus from isolcpus, parent can shrink cpu list
+ " C1-3:S+ C3:P2 . C3:P3 C1-2 . . . . 0 A1:1-2,A2:3,B1: A2:P2,B1:P3 . 3"
+ " C1-3:S+ C3:P2 . C3:P3 C1 . . . . 0 A1:1,A2:3,B1: A2:P2,B1:P3 . 3"
+
+ # Isolated partition can't be enabled if it can't pull all isolated cpus from parent or isolcpus
+ " C1-3:S+ C2 . C3:P3 . P2 . . . 0 A1:1-2,A2:2,B1:3 A2:P-2,B1:P3"
+
+ # Isolated/isolcpus partition online/offline tests
+ " C1-3:S+ C3 . C2-3:P3 . P2 O2=0 . . 0 A1:1,A2:3,B1: A2:P2,B1:P3 .:2-3,B1:3 2-3"
+ " C1-3:S+ C3 . C2-3:P3 . P2 O2=0 O2=1 . 0 A1:1,A2:3,B1:2 A2:P2,B1:P3 .:2-3,B1:3 2-3"
+ " C1-3:S+ C2-3 . C2-3:P3 . P2 O2=0 . . 0 A1:1,A2:3,B1: A2:P2,B1:P3 .:2-3,B1:2-3 2-3"
+ " C1-3:S+ C2-3 . C2-3:P3 . P2 O2=0 O2=1 . 0 A1:1,A2:2-3,B1: A2:P2,B1:P3 .:2-3,B1:2-3 2-3"
+
+ # Isolated partition pulling from isolcpus become invalid if all isolated cpus gone
+ " C1-3:S+ C3 . C2-3:P3 . P2 O3=0 . . 0 A1:1,A2:1,B1:2 A2:P-2,B1:P3 .:2-3,B1:"
+ " C1-3:S+ C3 . C2-3:P3 . P2 O3=0 O3=1 . 0 A1:1,A2:1,B1:2-3 A2:P-2,B1:P3 .:2-3,B1:"
+
+ # Hotplug won't affect isolcpus partition with empty cpus_allowed
+ " C1-3 . . P3 . . O1=0 . . 0 A1:2-3,B1: B1:P3"
+
+ # old-A1 old-A2 old-A3 old-B1 new-A1 new-A2 new-A3 new-B1 new-C1 fail ECPUs Pstate PCPUS ISOLCPUS
+ # ------ ------ ------ ------ ------ ------ ------ ------ ------ ---- ----- ------ ----- --------
#
# Incorrect change to cpuset.cpus invalidates partition root
#
# Adding CPUs to partition root that are not in parent's
# cpuset.cpus is allowed, but those extra CPUs are ignored.
- " S+ C2-3:P1:S+ C3:P1 . . . C2-4 . . 0 A1:,A2:2-3 A1:P1,A2:P1"
+ "C2-3:P1:S+ C3:P1 . . . C2-4 . . . 0 A1:,A2:2-3 A1:P1,A2:P1"
# Taking away all CPUs from parent or itself if there are tasks
# will make the partition invalid.
- " S+ C2-3:P1:S+ C3:P1 . . T C2-3 . . 0 A1:2-3,A2:2-3 A1:P1,A2:P-1"
- " S+ C3:P1:S+ C3 . . T P1 . . 0 A1:3,A2:3 A1:P1,A2:P-1"
- " S+ $SETUP_A123_PARTITIONS . T:C2-3 . . . 0 A1:2-3,A2:2-3,A3:3 A1:P1,A2:P-1,A3:P-1"
- " S+ $SETUP_A123_PARTITIONS . T:C2-3:C1-3 . . . 0 A1:1,A2:2,A3:3 A1:P1,A2:P1,A3:P1"
+ "C2-3:P1:S+ C3:P1 . . T C2-3 . . . 0 A1:2-3,A2:2-3 A1:P1,A2:P-1"
+ " C3:P1:S+ C3 . . T P1 . . . 0 A1:3,A2:3 A1:P1,A2:P-1"
+ "$SETUP_A123_PARTITIONS . T:C2-3 . . . . 0 A1:2-3,A2:2-3,A3:3 A1:P1,A2:P-1,A3:P-1"
+ "$SETUP_A123_PARTITIONS . T:C2-3:C1-3 . . . . 0 A1:1,A2:2,A3:3 A1:P1,A2:P1,A3:P1"
# Changing a partition root to member makes child partitions invalid
- " S+ C2-3:P1:S+ C3:P1 . . P0 . . . 0 A1:2-3,A2:3 A1:P0,A2:P-1"
- " S+ $SETUP_A123_PARTITIONS . C2-3 P0 . . 0 A1:2-3,A2:2-3,A3:3 A1:P1,A2:P0,A3:P-1"
+ "C2-3:P1:S+ C3:P1 . . P0 . . . . 0 A1:2-3,A2:3 A1:P0,A2:P-1"
+ "$SETUP_A123_PARTITIONS . C2-3 P0 . . . 0 A1:2-3,A2:2-3,A3:3 A1:P1,A2:P0,A3:P-1"
# cpuset.cpus can contains cpus not in parent's cpuset.cpus as long
# as they overlap.
- " S+ C2-3:P1:S+ . . . . C3-4:P1 . . 0 A1:2,A2:3 A1:P1,A2:P1"
+ "C2-3:P1:S+ . . . . C3-4:P1 . . . 0 A1:2,A2:3 A1:P1,A2:P1"
# Deletion of CPUs distributed to child cgroup is allowed.
- " S+ C0-1:P1:S+ C1 . C2-3 C4-5 . . . 0 A1:4-5,A2:4-5"
+ "C0-1:P1:S+ C1 . C2-3 C4-5 . . . . 0 A1:4-5,A2:4-5"
# To become a valid partition root, cpuset.cpus must overlap parent's
# cpuset.cpus.
- " S+ C0-1:P1 . . C2-3 S+ C4-5:P1 . . 0 A1:0-1,A2:0-1 A1:P1,A2:P-1"
+ " C0-1:P1 . . C2-3 S+ C4-5:P1 . . . 0 A1:0-1,A2:0-1 A1:P1,A2:P-1"
# Enabling partition with child cpusets is allowed
- " S+ C0-1:S+ C1 . C2-3 P1 . . . 0 A1:0-1,A2:1 A1:P1"
+ " C0-1:S+ C1 . C2-3 P1 . . . . 0 A1:0-1,A2:1 A1:P1"
# A partition root with non-partition root parent is invalid, but it
# can be made valid if its parent becomes a partition root too.
- " S+ C0-1:S+ C1 . C2-3 . P2 . . 0 A1:0-1,A2:1 A1:P0,A2:P-2"
- " S+ C0-1:S+ C1:P2 . C2-3 P1 . . . 0 A1:0,A2:1 A1:P1,A2:P2"
+ " C0-1:S+ C1 . C2-3 . P2 . . . 0 A1:0-1,A2:1 A1:P0,A2:P-2"
+ " C0-1:S+ C1:P2 . C2-3 P1 . . . . 0 A1:0,A2:1 A1:P1,A2:P2"
# A non-exclusive cpuset.cpus change will invalidate partition and its siblings
- " S+ C0-1:P1 . . C2-3 C0-2 . . . 0 A1:0-2,B1:2-3 A1:P-1,B1:P0"
- " S+ C0-1:P1 . . P1:C2-3 C0-2 . . . 0 A1:0-2,B1:2-3 A1:P-1,B1:P-1"
- " S+ C0-1 . . P1:C2-3 C0-2 . . . 0 A1:0-2,B1:2-3 A1:P0,B1:P-1"
+ " C0-1:P1 . . C2-3 C0-2 . . . . 0 A1:0-2,B1:2-3 A1:P-1,B1:P0"
+ " C0-1:P1 . . P1:C2-3 C0-2 . . . . 0 A1:0-2,B1:2-3 A1:P-1,B1:P-1"
+ " C0-1 . . P1:C2-3 C0-2 . . . . 0 A1:0-2,B1:2-3 A1:P0,B1:P-1"
- # test old-A1 old-A2 old-A3 old-B1 new-A1 new-A2 new-A3 new-B1 fail ECPUs Pstate
- # ---- ------ ------ ------ ------ ------ ------ ------ ------ ---- ----- ------
+ # old-A1 old-A2 old-A3 old-B1 new-A1 new-A2 new-A3 new-B1 new-C1 fail ECPUs Pstate PCPUS ISOLCPUS
+ # ------ ------ ------ ------ ------ ------ ------ ------ ------ ---- ----- ------ ----- --------
# Failure cases:
# A task cannot be added to a partition with no cpu
- " S+ C2-3:P1:S+ C3:P1 . . O2-0:T . . . 1 A1:,A2:3 A1:P1,A2:P1"
+ "C2-3:P1:S+ C3:P1 . . O2=0:T . . . . 1 A1:,A2:3 A1:P1,A2:P1"
+
+ # Task is not allowed in an isolcpus partition
+ " . . . C3:P3 . . . T . 1"
+
+ # Child cpuset is not allowed under an isolcpus partition
+ " C1:P3 . . . S+ . . . . 1"
)
#
# Write to the cpu online file
-# $1 - <c>-<v> where <c> = cpu number, <v> value to be written
+# $1 - <c>=<v> where <c> = cpu number, <v> value to be written
#
write_cpu_online()
{
- CPU=${1%-*}
- VAL=${1#*-}
+ CPU=${1%=*}
+ VAL=${1#*=}
CPUFILE=//sys/devices/system/cpu/cpu${CPU}/online
if [[ $VAL -eq 0 ]]
then
@@ -349,11 +400,12 @@ set_ctrl_state()
TMPMSG=/tmp/.msg_$$
CGRP=$1
STATE=$2
- SHOWERR=${3}${VERBOSE}
+ SHOWERR=${3}
CTRL=${CTRL:=$CONTROLLER}
HASERR=0
REDIRECT="2> $TMPMSG"
[[ -z "$STATE" || "$STATE" = '.' ]] && return 0
+ [[ $VERBOSE -gt 0 ]] && SHOWERR=1
rm -f $TMPMSG
for CMD in $(echo $STATE | sed -e "s/:/ /g")
@@ -383,6 +435,9 @@ set_ctrl_state()
;;
2) VAL=isolated
;;
+ 3)
+ VAL=isolcpus
+ ;;
*)
echo "Invalid partition state - $VAL"
exit 1
@@ -430,7 +485,7 @@ online_cpus()
[[ -n "OFFLINE_CPUS" ]] && {
for C in $OFFLINE_CPUS
do
- write_cpu_online ${C}-1
+ write_cpu_online ${C}=1
done
}
}
@@ -442,19 +497,23 @@ reset_cgroup_states()
{
echo 0 > $CGROUP2/cgroup.procs
online_cpus
- rmdir A1/A2/A3 A1/A2 A1 B1 > /dev/null 2>&1
+ rmdir A1/A2/A3 A1/A2 A1 B1 C1 > /dev/null 2>&1
set_ctrl_state . S-
pause 0.01
}
dump_states()
{
- for DIR in A1 A1/A2 A1/A2/A3 B1
+ for DIR in . A1 A1/A2 A1/A2/A3 B1 C1
do
ECPUS=$DIR/cpuset.cpus.effective
PRS=$DIR/cpuset.cpus.partition
+ PCPUS=$DIR/cpuset.cpus.subpartitions
+ [[ -e $PCPUS ]] ||
+ PCPUS=$DIR/.__DEBUG__.cpuset.cpus.subpartitions
[[ -e $ECPUS ]] && echo "$ECPUS: $(cat $ECPUS)"
[[ -e $PRS ]] && echo "$PRS: $(cat $PRS)"
+ [[ -e $PCPUS ]] && echo "$PCPUS: $(cat $PCPUS)"
done
}
@@ -478,6 +537,26 @@ check_effective_cpus()
done
}
+#
+# Check subparts cpus
+# $1 - check string, format: <cgroup>:<cpu-list>[,<cgroup>:<cpu-list>]*
+#
+check_subparts_cpus()
+{
+ CHK_STR=$1
+ for CHK in $(echo $CHK_STR | sed -e "s/,/ /g")
+ do
+ set -- $(echo $CHK | sed -e "s/:/ /g")
+ CGRP=$1
+ CPUS=$2
+ [[ $CGRP = A2 ]] && CGRP=A1/A2
+ [[ $CGRP = A3 ]] && CGRP=A1/A2/A3
+ FILE=$CGRP/.__DEBUG__.cpuset.cpus.subpartitions
+ [[ -e $FILE ]] || return 0 # Skip test
+ [[ $CPUS = $(cat $FILE) ]] || return 1
+ done
+}
+
#
# Check cgroup states
# $1 - check string, format: <cgroup>:<state>[,<cgroup>:<state>]*
@@ -512,18 +591,80 @@ check_cgroup_states()
isolated)
VAL=2
;;
+ isolcpus)
+ VAL=3
+ ;;
"root invalid"*)
VAL=-1
;;
"isolated invalid"*)
VAL=-2
;;
+ "isolcpus invalid"*)
+ VAL=-3
+ ;;
esac
[[ $EVAL != $VAL ]] && return 1
done
return 0
}
+#
+# Get isolated (including offline) CPUs by looking at
+# /sys/kernel/debug/sched/domains and compare that with the expected value.
+#
+# $1 - expected isolated cpu list
+#
+check_isolcpus()
+{
+ EXPECT_VAL=$1
+ ISOLCPUS=
+ LASTISOLCPU=
+ SCHED_DOMAINS=/sys/kernel/debug/sched/domains
+ [[ -d $SCHED_DOMAINS ]] || return 0 # Skip check
+
+ for ((CPU=0; CPU < $NR_CPUS; CPU++))
+ do
+ [[ -n "$(ls ${SCHED_DOMAINS}/cpu$CPU)" ]] && continue
+
+ if [[ -z "$LASTISOLCPU" ]]
+ then
+ ISOLCPUS=$CPU
+ LASTISOLCPU=$CPU
+ elif [[ "$LASTISOLCPU" -eq $((CPU - 1)) ]]
+ then
+ echo $ISOLCPUS | grep -q "\<$LASTISOLCPU\$"
+ if [[ $? -eq 0 ]]
+ then
+ ISOLCPUS=${ISOLCPUS}-
+ fi
+ LASTISOLCPU=$CPU
+ else
+ if [[ $ISOLCPUS = *- ]]
+ then
+ ISOLCPUS=${ISOLCPUS}$LASTISOLCPU
+ fi
+ ISOLCPUS=${ISOLCPUS},$CPU
+ LASTISOLCPU=$CPU
+ fi
+ done
+ [[ "$ISOLCPUS" = *- ]] && ISOLCPUS=${ISOLCPUS}$LASTISOLCPU
+ [[ $EXPECT_VAL = $ISOLCPUS ]]
+}
+
+test_fail()
+{
+ TESTNUM=$1
+ TESTTYPE=$2
+ ADDINFO=$3
+ echo "Test $TEST[$TESTNUM] failed $TESTTYPE check!"
+ [[ -n "$ADDINFO" ]] && echo "*** $ADDINFO ***"
+ eval echo \"\${$TEST[$I]}\"
+ echo
+ dump_states
+ exit 1
+}
+
#
# Run cpuset state transition test
# $1 - test matrix name
@@ -548,60 +689,59 @@ run_state_test()
while [[ $I -lt $CNT ]]
do
echo "Running test $I ..." > /dev/console
+ [[ $VERBOSE -gt 1 ]] && eval echo \"\${$TEST[$I]}\"
eval set -- "\${$TEST[$I]}"
- ROOT=$1
- OLD_A1=$2
- OLD_A2=$3
- OLD_A3=$4
- OLD_B1=$5
- NEW_A1=$6
- NEW_A2=$7
- NEW_A3=$8
- NEW_B1=$9
+ OLD_A1=$1
+ OLD_A2=$2
+ OLD_A3=$3
+ OLD_B1=$4
+ NEW_A1=$5
+ NEW_A2=$6
+ NEW_A3=$7
+ NEW_B1=$8
+ NEW_C1=$9
RESULT=${10}
ECPUS=${11}
STATES=${12}
+ PCPUS=${13}
+ ICPUS=${14}
- set_ctrl_state_noerr . $ROOT
+ set_ctrl_state_noerr . "S+"
+ set_ctrl_state_noerr B1 $OLD_B1
set_ctrl_state_noerr A1 $OLD_A1
set_ctrl_state_noerr A1/A2 $OLD_A2
set_ctrl_state_noerr A1/A2/A3 $OLD_A3
- set_ctrl_state_noerr B1 $OLD_B1
RETVAL=0
set_ctrl_state A1 $NEW_A1; ((RETVAL += $?))
set_ctrl_state A1/A2 $NEW_A2; ((RETVAL += $?))
set_ctrl_state A1/A2/A3 $NEW_A3; ((RETVAL += $?))
set_ctrl_state B1 $NEW_B1; ((RETVAL += $?))
+ set_ctrl_state C1 $NEW_C1; ((RETVAL += $?))
- [[ $RETVAL -ne $RESULT ]] && {
- echo "Test $TEST[$I] failed result check!"
- eval echo \"\${$TEST[$I]}\"
- dump_states
- exit 1
- }
+ [[ $RETVAL -ne $RESULT ]] && test_fail $I result
[[ -n "$ECPUS" && "$ECPUS" != . ]] && {
check_effective_cpus $ECPUS
- [[ $? -ne 0 ]] && {
- echo "Test $TEST[$I] failed effective CPU check!"
- eval echo \"\${$TEST[$I]}\"
- echo
- dump_states
- exit 1
- }
+ [[ $? -ne 0 ]] && test_fail $I "effective CPU"
}
- [[ -n "$STATES" ]] && {
+ [[ -n "$STATES" && "$STATES" != . ]] && {
check_cgroup_states $STATES
- [[ $? -ne 0 ]] && {
- echo "FAILED: Test $TEST[$I] failed states check!"
- eval echo \"\${$TEST[$I]}\"
- echo
- dump_states
- exit 1
- }
+ [[ $? -ne 0 ]] && test_fail $I states
}
+ [[ -n "$PCPUS" && "$PCPUS" != . ]] && {
+ check_subparts_cpus $PCPUS
+ [[ $? -ne 0 ]] && test_fail $I "subpartitions CPU"
+ }
+
+ # Compare the expected isolated CPUs with the actual ones,
+ # if available
+ [[ -n "$ICPUS" ]] && {
+ check_isolcpus $ICPUS
+ [[ $? -ne 0 ]] && test_fail $I "isolated CPU" \
+ "Expect $ICPUS, get $ISOLCPUS instead"
+ }
reset_cgroup_states
#
# Check to see if effective cpu list changes
@@ -612,7 +752,7 @@ run_state_test()
echo "Effective cpus changed to $NEWLIST after test $I!"
exit 1
}
- [[ -n "$VERBOSE" ]] && echo "Test $I done."
+ [[ $VERBOSE -gt 0 ]] && echo "Test $I done."
((I++))
done
echo "All $I tests of $TEST PASSED."
@@ -655,7 +795,7 @@ test_inotify()
rm -f $PRS
wait_inotify $PWD/cpuset.cpus.partition $PRS &
pause 0.01
- set_ctrl_state . "O1-0"
+ set_ctrl_state . "O1=0"
pause 0.01
check_cgroup_states ".:P-1"
if [[ $? -ne 0 ]]
--
2.31.1