This series adds support for:
- SERDES, WIZ DT nodes, Serdes lane control mux
- MAIN CPSW2G nodes
- DSS and DisplayPort-0 nodes
This series depends on DMA support patches for J784S4[1] which are
applied to linux-next.
DisplayPort has been tested on local J784S4 EVM. Test log:
<https://gist.github.com/Jayesh2000/b1465fc170cd97db4f0956770fafbc50>
Changelog v3->v2:
- fix dtc warnings for 'scm_conf' and 'serdes_ln_ctrl' nodes
(Checked all the changes of the series with W=12 option during build)
- added clock-frequency for serdes_refclk along with other EVM changes
This refclk is being used by all the instances of serdes_wiz which
are disabled by default. So configuring refclk when the serdes nodes
are used for the first time is okay.
Changelog v1->v2:
- Moved J784S4 EVM changes together to the last patch
(Suggested by Andrew)
v2 patch link:
<https://lore.kernel.org/all/[email protected]/>
[1]:
<https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/?id=00e34c94987e4fe866f12ad8eac17268c936880c>
<https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/?id=82e6051a48957a89066d15b17bb85d2f662f2bad>
<https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/?id=436b288687176bf4d2c1cd25b86173e5a1649a60>
Rahul T R (2):
arm64: dts: ti: k3-j784s4-main: Add DSS and DP-bridge node
arm64: dts: ti: k3-j784s4-evm: Enable DisplayPort-0
Siddharth Vadapalli (3):
arm64: dts: ti: k3-j784s4-main: Add system controller and SERDES lane
mux
arm64: dts: ti: k3-j784s4: Add Main CPSW2G node
arm64: dts: ti: k3-j784s4: Add WIZ and SERDES PHY nodes
arch/arm64/boot/dts/ti/k3-j784s4-evm.dts | 164 ++++++++++
arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi | 338 +++++++++++++++++++++
2 files changed, 502 insertions(+)
--
2.25.1
From: Siddharth Vadapalli <[email protected]>
J784S4 SoC has 4 Serdes instances along with their respective WIZ
instances. Add device-tree nodes for them and disable them by default.
Signed-off-by: Siddharth Vadapalli <[email protected]>
Signed-off-by: Jayesh Choudhary <[email protected]>
---
arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi | 171 +++++++++++++++++++++
1 file changed, 171 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
index 8bd8aebebe1c..51aa476dedba 100644
--- a/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
@@ -7,6 +7,15 @@
#include <dt-bindings/mux/mux.h>
#include <dt-bindings/mux/ti-serdes.h>
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/phy/phy-ti.h>
+
+/ {
+ serdes_refclk: serdes-refclk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ };
+};
&cbass_main {
msmc_ram: sram@70000000 {
@@ -440,6 +449,168 @@ main_sdhci1: mmc@4fb0000 {
status = "disabled";
};
+ serdes_wiz0: wiz@5060000 {
+ compatible = "ti,j784s4-wiz-10g";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ power-domains = <&k3_pds 404 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 404 2>, <&k3_clks 404 6>, <&k3_clks 404 5>, <&serdes_refclk>;
+ clock-names = "fck", "core_ref_clk", "core_ref1_clk", "ext_ref_clk";
+ assigned-clocks = <&k3_clks 404 6>;
+ assigned-clock-parents = <&k3_clks 404 10>;
+ num-lanes = <4>;
+ #reset-cells = <1>;
+ #clock-cells = <1>;
+ ranges = <0x5060000 0x00 0x5060000 0x10000>;
+
+ status = "disabled";
+
+ serdes0: serdes@5060000 {
+ compatible = "ti,j721e-serdes-10g";
+ reg = <0x05060000 0x010000>;
+ reg-names = "torrent_phy";
+ resets = <&serdes_wiz0 0>;
+ reset-names = "torrent_reset";
+ clocks = <&serdes_wiz0 TI_WIZ_PLL0_REFCLK>,
+ <&serdes_wiz0 TI_WIZ_PHY_EN_REFCLK>;
+ clock-names = "refclk", "phy_en_refclk";
+ assigned-clocks = <&serdes_wiz0 TI_WIZ_PLL0_REFCLK>,
+ <&serdes_wiz0 TI_WIZ_PLL1_REFCLK>,
+ <&serdes_wiz0 TI_WIZ_REFCLK_DIG>;
+ assigned-clock-parents = <&k3_clks 404 6>,
+ <&k3_clks 404 6>,
+ <&k3_clks 404 6>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #clock-cells = <1>;
+
+ status = "disabled";
+ };
+ };
+
+ serdes_wiz1: wiz@5070000 {
+ compatible = "ti,j784s4-wiz-10g";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ power-domains = <&k3_pds 405 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 405 2>, <&k3_clks 405 6>, <&k3_clks 405 5>, <&serdes_refclk>;
+ clock-names = "fck", "core_ref_clk", "core_ref1_clk", "ext_ref_clk";
+ assigned-clocks = <&k3_clks 405 6>;
+ assigned-clock-parents = <&k3_clks 405 10>;
+ num-lanes = <4>;
+ #reset-cells = <1>;
+ #clock-cells = <1>;
+ ranges = <0x05070000 0x00 0x05070000 0x10000>;
+
+ status = "disabled";
+
+ serdes1: serdes@5070000 {
+ compatible = "ti,j721e-serdes-10g";
+ reg = <0x05070000 0x010000>;
+ reg-names = "torrent_phy";
+ resets = <&serdes_wiz1 0>;
+ reset-names = "torrent_reset";
+ clocks = <&serdes_wiz1 TI_WIZ_PLL0_REFCLK>,
+ <&serdes_wiz1 TI_WIZ_PHY_EN_REFCLK>;
+ clock-names = "refclk", "phy_en_refclk";
+ assigned-clocks = <&serdes_wiz1 TI_WIZ_PLL0_REFCLK>,
+ <&serdes_wiz1 TI_WIZ_PLL1_REFCLK>,
+ <&serdes_wiz1 TI_WIZ_REFCLK_DIG>;
+ assigned-clock-parents = <&k3_clks 405 6>,
+ <&k3_clks 405 6>,
+ <&k3_clks 405 6>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #clock-cells = <1>;
+
+ status = "disabled";
+ };
+ };
+
+ serdes_wiz2: wiz@5020000 {
+ compatible = "ti,j784s4-wiz-10g";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ power-domains = <&k3_pds 406 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 406 2>, <&k3_clks 406 6>, <&k3_clks 406 5>, <&serdes_refclk>;
+ clock-names = "fck", "core_ref_clk", "core_ref1_clk", "ext_ref_clk";
+ assigned-clocks = <&k3_clks 406 6>;
+ assigned-clock-parents = <&k3_clks 406 10>;
+ num-lanes = <4>;
+ #reset-cells = <1>;
+ #clock-cells = <1>;
+ ranges = <0x05020000 0x00 0x05020000 0x10000>;
+
+ status = "disabled";
+
+ serdes2: serdes@5020000 {
+ compatible = "ti,j721e-serdes-10g";
+ reg = <0x05020000 0x010000>;
+ reg-names = "torrent_phy";
+ resets = <&serdes_wiz2 0>;
+ reset-names = "torrent_reset";
+ clocks = <&serdes_wiz2 TI_WIZ_PLL0_REFCLK>,
+ <&serdes_wiz2 TI_WIZ_PHY_EN_REFCLK>;
+ clock-names = "refclk", "phy_en_refclk";
+ assigned-clocks = <&serdes_wiz2 TI_WIZ_PLL0_REFCLK>,
+ <&serdes_wiz2 TI_WIZ_PLL1_REFCLK>,
+ <&serdes_wiz2 TI_WIZ_REFCLK_DIG>;
+ assigned-clock-parents = <&k3_clks 406 6>,
+ <&k3_clks 406 6>,
+ <&k3_clks 406 6>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #clock-cells = <1>;
+
+ status = "disabled";
+ };
+ };
+
+ serdes_wiz4: wiz@5050000 {
+ compatible = "ti,j784s4-wiz-10g";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ power-domains = <&k3_pds 407 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 407 2>, <&k3_clks 407 6>, <&k3_clks 407 5>, <&serdes_refclk>;
+ clock-names = "fck", "core_ref_clk", "core_ref1_clk", "ext_ref_clk";
+ assigned-clocks = <&k3_clks 407 6>;
+ assigned-clock-parents = <&k3_clks 407 10>;
+ num-lanes = <4>;
+ #reset-cells = <1>;
+ #clock-cells = <1>;
+ ranges = <0x05050000 0x00 0x05050000 0x10000>,
+ <0xa030a00 0x00 0xa030a00 0x40>; /* DPTX PHY */
+
+ status = "disabled";
+
+ serdes4: serdes@5050000 {
+ /*
+ * Note: we also map DPTX PHY registers as the Torrent
+ * needs to manage those.
+ */
+ compatible = "ti,j721e-serdes-10g";
+ reg = <0x05050000 0x010000>,
+ <0x0a030a00 0x40>; /* DPTX PHY */
+ reg-names = "torrent_phy";
+ resets = <&serdes_wiz4 0>;
+ reset-names = "torrent_reset";
+ clocks = <&serdes_wiz4 TI_WIZ_PLL0_REFCLK>,
+ <&serdes_wiz4 TI_WIZ_PHY_EN_REFCLK>;
+ clock-names = "refclk", "phy_en_refclk";
+ assigned-clocks = <&serdes_wiz4 TI_WIZ_PLL0_REFCLK>,
+ <&serdes_wiz4 TI_WIZ_PLL1_REFCLK>,
+ <&serdes_wiz4 TI_WIZ_REFCLK_DIG>;
+ assigned-clock-parents = <&k3_clks 407 6>,
+ <&k3_clks 407 6>,
+ <&k3_clks 407 6>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #clock-cells = <1>;
+
+ status = "disabled";
+ };
+ };
+
main_navss: bus@30000000 {
compatible = "simple-bus";
#address-cells = <2>;
--
2.25.1
From: Rahul T R <[email protected]>
Enable display for J784S4 EVM.
Add assigned clocks for DSS, DT node for DisplayPort PHY and pinmux for
DP HPD. Add the clock frequency for serdes_refclk.
Add the endpoint nodes to describe connection from:
DSS => MHDP => DisplayPort connector.
Also add the GPIO expander-4 node and pinmux for main_i2c4 which is
required for controlling DP power. Set status for all required nodes
for DP-0 as "okay".
Signed-off-by: Rahul T R <[email protected]>
[[email protected]: move all the changes together to enable DP-0 in EVM]
Signed-off-by: Jayesh Choudhary <[email protected]>
---
arch/arm64/boot/dts/ti/k3-j784s4-evm.dts | 116 +++++++++++++++++++++++
1 file changed, 116 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts b/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
index aef6f53ae8ac..03c9bf34cb1b 100644
--- a/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
+++ b/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
@@ -102,6 +102,28 @@ vdd_sd_dv: regulator-TLV71033 {
states = <1800000 0x0>,
<3300000 0x1>;
};
+
+ dp0_pwr_3v3: regulator-dp0-prw {
+ compatible = "regulator-fixed";
+ regulator-name = "dp0-pwr";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&exp4 0 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ dp0: dp0-connector {
+ compatible = "dp-connector";
+ label = "DP0";
+ type = "full-size";
+ dp-pwr-supply = <&dp0_pwr_3v3>;
+
+ port {
+ dp0_connector_in: endpoint {
+ remote-endpoint = <&dp0_out>;
+ };
+ };
+ };
};
&main_pmx0 {
@@ -163,6 +185,19 @@ vdd_sd_dv_pins_default: vdd-sd-dv-pins-default {
J784S4_IOPAD(0x020, PIN_INPUT, 7) /* (AJ35) MCAN15_RX.GPIO0_8 */
>;
};
+
+ dp0_pins_default: dp0-pins-default {
+ pinctrl-single,pins = <
+ J784S4_IOPAD(0x0cc, PIN_INPUT, 12) /* (AM37) SPI0_CS0.DP0_HPD */
+ >;
+ };
+
+ main_i2c4_pins_default: main-i2c4-pins-default {
+ pinctrl-single,pins = <
+ J784S4_IOPAD(0x014, PIN_INPUT_PULLUP, 8) /* (AG33) MCAN14_TX.I2C4_SCL */
+ J784S4_IOPAD(0x010, PIN_INPUT_PULLUP, 8) /* (AH33) MCAN13_RX.I2C4_SDA */
+ >;
+ };
};
&wkup_pmx0 {
@@ -301,3 +336,84 @@ &main_cpsw1_port1 {
phy-mode = "rgmii-rxid";
phy-handle = <&main_phy0>;
};
+
+&serdes_refclk {
+ clock-frequency = <100000000>;
+};
+
+&dss {
+ status = "okay";
+ assigned-clocks = <&k3_clks 218 2>,
+ <&k3_clks 218 5>,
+ <&k3_clks 218 14>,
+ <&k3_clks 218 18>;
+ assigned-clock-parents = <&k3_clks 218 3>,
+ <&k3_clks 218 7>,
+ <&k3_clks 218 16>,
+ <&k3_clks 218 22>;
+};
+
+&serdes_wiz4 {
+ status = "okay";
+};
+
+&serdes4 {
+ status = "okay";
+ serdes4_dp_link: phy@0 {
+ reg = <0>;
+ cdns,num-lanes = <4>;
+ #phy-cells = <0>;
+ cdns,phy-type = <PHY_TYPE_DP>;
+ resets = <&serdes_wiz4 1>, <&serdes_wiz4 2>,
+ <&serdes_wiz4 3>, <&serdes_wiz4 4>;
+ };
+};
+
+&mhdp {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&dp0_pins_default>;
+ phys = <&serdes4_dp_link>;
+ phy-names = "dpphy";
+};
+
+&dss_ports {
+ port {
+ dpi0_out: endpoint {
+ remote-endpoint = <&dp0_in>;
+ };
+ };
+};
+
+&main_i2c4 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&main_i2c4_pins_default>;
+ clock-frequency = <400000>;
+
+ exp4: gpio@20 {
+ compatible = "ti,tca6408";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+};
+
+&dp0_ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dp0_in: endpoint {
+ remote-endpoint = <&dpi0_out>;
+ };
+ };
+
+ port@4 {
+ reg = <4>;
+ dp0_out: endpoint {
+ remote-endpoint = <&dp0_connector_in>;
+ };
+ };
+};
--
2.25.1