OverCurrent condition is not standardized in the UHCI spec.
Zhaoxin UHCI controllers report OverCurrent bit active off.
In order to handle OverCurrent condition correctly, the uhci-hcd
driver needs to be told to expect the active-off behavior.
Suggested-by: Alan Stern <[email protected]>
Cc: [email protected]
Signed-off-by: Weitao Wang <[email protected]>
---
v2->v3
- Change patch code style.
drivers/usb/host/uhci-pci.c | 10 ++++++----
1 file changed, 6 insertions(+), 4 deletions(-)
diff --git a/drivers/usb/host/uhci-pci.c b/drivers/usb/host/uhci-pci.c
index 3592f757fe05..7bd2fddde770 100644
--- a/drivers/usb/host/uhci-pci.c
+++ b/drivers/usb/host/uhci-pci.c
@@ -119,11 +119,13 @@ static int uhci_pci_init(struct usb_hcd *hcd)
uhci->rh_numports = uhci_count_ports(hcd);
- /* Intel controllers report the OverCurrent bit active on.
- * VIA controllers report it active off, so we'll adjust the
- * bit value. (It's not standardized in the UHCI spec.)
+ /*
+ * Intel controllers report the OverCurrent bit active on. VIA
+ * and ZHAOXIN controllers report it active off, so we'll adjust
+ * the bit value. (It's not standardized in the UHCI spec.)
*/
- if (to_pci_dev(uhci_dev(uhci))->vendor == PCI_VENDOR_ID_VIA)
+ if (to_pci_dev(uhci_dev(uhci))->vendor == PCI_VENDOR_ID_VIA ||
+ to_pci_dev(uhci_dev(uhci))->vendor == PCI_VENDOR_ID_ZHAOXIN)
uhci->oc_low = 1;
/* HP's server management chip requires a longer port reset delay. */
--
2.32.0
On Sun, Apr 23, 2023 at 06:59:52PM +0800, Weitao Wang wrote:
> OverCurrent condition is not standardized in the UHCI spec.
> Zhaoxin UHCI controllers report OverCurrent bit active off.
> In order to handle OverCurrent condition correctly, the uhci-hcd
> driver needs to be told to expect the active-off behavior.
>
> Suggested-by: Alan Stern <[email protected]>
> Cc: [email protected]
> Signed-off-by: Weitao Wang <[email protected]>
> ---
> v2->v3
> - Change patch code style.
>
> drivers/usb/host/uhci-pci.c | 10 ++++++----
> 1 file changed, 6 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/usb/host/uhci-pci.c b/drivers/usb/host/uhci-pci.c
> index 3592f757fe05..7bd2fddde770 100644
> --- a/drivers/usb/host/uhci-pci.c
> +++ b/drivers/usb/host/uhci-pci.c
> @@ -119,11 +119,13 @@ static int uhci_pci_init(struct usb_hcd *hcd)
>
> uhci->rh_numports = uhci_count_ports(hcd);
>
> - /* Intel controllers report the OverCurrent bit active on.
> - * VIA controllers report it active off, so we'll adjust the
> - * bit value. (It's not standardized in the UHCI spec.)
> + /*
> + * Intel controllers report the OverCurrent bit active on. VIA
> + * and ZHAOXIN controllers report it active off, so we'll adjust
> + * the bit value. (It's not standardized in the UHCI spec.)
> */
> - if (to_pci_dev(uhci_dev(uhci))->vendor == PCI_VENDOR_ID_VIA)
> + if (to_pci_dev(uhci_dev(uhci))->vendor == PCI_VENDOR_ID_VIA ||
> + to_pci_dev(uhci_dev(uhci))->vendor == PCI_VENDOR_ID_ZHAOXIN)
> uhci->oc_low = 1;
>
> /* HP's server management chip requires a longer port reset delay. */
Acked-by: Alan Stern <[email protected]>