This adds compulsory device tree support to the Cirrus ep93xx ARMv4
platform.
- We select PINCTRL_EP93xx
- We select COMMON_CLK_EP93XX, as clock driver moved out of platform
code
- We select ARCH_HAS_RESET_CONTROLLER
And also we need ARM_ATAG_DTB_COMPAT to update device tree with
information about memory passed from bootloader.
We have to leave all MACH options as they are used for board checking
before decomp, to turn off watchdog and ethernet DMA.
Signed-off-by: Nikita Shubin <[email protected]>
---
Notes:
rfc->v0
- fixed typo
- removed board-dt.c completely
Alexander Sverdlin:
- platfrom -> platform
arch/arm/Makefile | 1 -
arch/arm/mach-ep93xx/Kconfig | 20 ++++++++++----------
arch/arm/mach-ep93xx/Makefile | 11 -----------
3 files changed, 10 insertions(+), 22 deletions(-)
delete mode 100644 arch/arm/mach-ep93xx/Makefile
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 485a439e22ca..8ad844ba777e 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -179,7 +179,6 @@ machine-$(CONFIG_ARCH_CLPS711X) += clps711x
machine-$(CONFIG_ARCH_DAVINCI) += davinci
machine-$(CONFIG_ARCH_DIGICOLOR) += digicolor
machine-$(CONFIG_ARCH_DOVE) += dove
-machine-$(CONFIG_ARCH_EP93XX) += ep93xx
machine-$(CONFIG_ARCH_EXYNOS) += exynos
machine-$(CONFIG_ARCH_FOOTBRIDGE) += footbridge
machine-$(CONFIG_ARCH_GEMINI) += gemini
diff --git a/arch/arm/mach-ep93xx/Kconfig b/arch/arm/mach-ep93xx/Kconfig
index 703f3d232a60..812b71dcf60e 100644
--- a/arch/arm/mach-ep93xx/Kconfig
+++ b/arch/arm/mach-ep93xx/Kconfig
@@ -3,27 +3,27 @@ menuconfig ARCH_EP93XX
bool "EP93xx-based"
depends on ATAGS
depends on ARCH_MULTI_V4T
+ # CONFIG_ARCH_MULTI_V7 is not set
depends on CPU_LITTLE_ENDIAN
+ select ARCH_HAS_RESET_CONTROLLER
select ARCH_SPARSEMEM_ENABLE
select ARM_AMBA
select ARM_VIC
+ select ARM_APPENDED_DTB # Old Redboot bootloaders deployed
+ select ARM_ATAG_DTB_COMPAT # we need this to update dt memory node
+ select COMMON_CLK_EP93XX
+ select EP93XX_TIMER
select CLKSRC_MMIO
select CPU_ARM920T
select GPIOLIB
+ select PINCTRL
+ select PINCTRL_EP93XX
help
This enables support for the Cirrus EP93xx series of CPUs.
if ARCH_EP93XX
-menu "Cirrus EP93xx Implementation Options"
-
-config EP93XX_SOC_COMMON
- bool
- default y
- select SOC_BUS
- select LEDS_GPIO_REGISTER
-
-comment "EP93xx Platforms"
+# menu "EP93xx Platforms"
config MACH_BK3
bool "Support Liebherr BK3.1"
@@ -103,6 +103,6 @@ config MACH_VISION_EP9307
Say 'Y' here if you want your kernel to support the
Vision Engraving Systems EP9307 SoM.
-endmenu
+# endmenu
endif
diff --git a/arch/arm/mach-ep93xx/Makefile b/arch/arm/mach-ep93xx/Makefile
deleted file mode 100644
index 62e37403df14..000000000000
--- a/arch/arm/mach-ep93xx/Makefile
+++ /dev/null
@@ -1,11 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the linux kernel.
-#
-obj-y := core.o clock.o timer-ep93xx.o
-
-obj-$(CONFIG_EP93XX_DMA) += dma.o
-
-obj-$(CONFIG_MACH_EDB93XX) += edb93xx.o
-obj-$(CONFIG_MACH_TS72XX) += ts72xx.o
-obj-$(CONFIG_MACH_VISION_EP9307)+= vision_ep9307.o
--
2.39.2