The previous version of this driver included wildcards in file names and
descriptions. This patch renames the driver to only support MAX5970 and
MAX5978, which are the only chips that the driver actually supports.
Signed-off-by: Naresh Solanki <[email protected]>
---
drivers/regulator/Kconfig | 6 +-
drivers/regulator/Makefile | 2 +-
...ax597x-regulator.c => max5970-regulator.c} | 126 +++++++++---------
3 files changed, 67 insertions(+), 67 deletions(-)
rename drivers/regulator/{max597x-regulator.c => max5970-regulator.c} (76%)
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index aae28d0a489c..36465aeb4e21 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -546,11 +546,11 @@ config REGULATOR_MAX1586
regulator via I2C bus. The provided regulator is suitable
for PXA27x chips to control VCC_CORE and VCC_USIM voltages.
-config REGULATOR_MAX597X
- tristate "Maxim 597x power switch and monitor"
+config REGULATOR_MAX5970
+ tristate "Maxim 5970/5978 power switch and monitor"
depends on I2C
depends on OF
- depends on MFD_MAX597X
+ depends on MFD_MAX5970
help
This driver controls a Maxim 5970/5978 switch via I2C bus.
The MAX5970/5978 is a smart switch with no output regulation, but
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index ee383d8fc835..aed1b7c2eb78 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -67,7 +67,7 @@ obj-$(CONFIG_REGULATOR_LTC3589) += ltc3589.o
obj-$(CONFIG_REGULATOR_LTC3676) += ltc3676.o
obj-$(CONFIG_REGULATOR_MAX14577) += max14577-regulator.o
obj-$(CONFIG_REGULATOR_MAX1586) += max1586.o
-obj-$(CONFIG_REGULATOR_MAX597X) += max597x-regulator.o
+obj-$(CONFIG_REGULATOR_MAX5970) += max5970-regulator.o
obj-$(CONFIG_REGULATOR_MAX77620) += max77620-regulator.o
obj-$(CONFIG_REGULATOR_MAX77650) += max77650-regulator.o
obj-$(CONFIG_REGULATOR_MAX8649) += max8649.o
diff --git a/drivers/regulator/max597x-regulator.c b/drivers/regulator/max5970-regulator.c
similarity index 76%
rename from drivers/regulator/max597x-regulator.c
rename to drivers/regulator/max5970-regulator.c
index 648e3641885a..08c8eb7b1ed6 100644
--- a/drivers/regulator/max597x-regulator.c
+++ b/drivers/regulator/max5970-regulator.c
@@ -20,19 +20,19 @@
#include <linux/regulator/of_regulator.h>
#include <linux/platform_device.h>
-#include <linux/mfd/max597x.h>
+#include <linux/mfd/max5970.h>
-struct max597x_regulator {
+struct max5970_regulator {
int num_switches, mon_rng, irng, shunt_micro_ohms, lim_uA;
struct regmap *regmap;
};
-enum max597x_regulator_id {
- MAX597X_SW0,
- MAX597X_SW1,
+enum max5970_regulator_id {
+ MAX5970_SW0,
+ MAX5970_SW1,
};
-static int max597x_uvp_ovp_check_mode(struct regulator_dev *rdev, int severity)
+static int max5970_uvp_ovp_check_mode(struct regulator_dev *rdev, int severity)
{
int ret, reg;
@@ -54,11 +54,11 @@ static int max597x_uvp_ovp_check_mode(struct regulator_dev *rdev, int severity)
return 0;
}
-static int max597x_set_vp(struct regulator_dev *rdev, int lim_uV, int severity,
+static int max5970_set_vp(struct regulator_dev *rdev, int lim_uV, int severity,
bool enable, bool overvoltage)
{
int off_h, off_l, reg, ret;
- struct max597x_regulator *data = rdev_get_drvdata(rdev);
+ struct max5970_regulator *data = rdev_get_drvdata(rdev);
int channel = rdev_get_id(rdev);
if (overvoltage) {
@@ -96,7 +96,7 @@ static int max597x_set_vp(struct regulator_dev *rdev, int lim_uV, int severity,
return 0;
}
-static int max597x_set_uvp(struct regulator_dev *rdev, int lim_uV, int severity,
+static int max5970_set_uvp(struct regulator_dev *rdev, int lim_uV, int severity,
bool enable)
{
int ret;
@@ -108,14 +108,14 @@ static int max597x_set_uvp(struct regulator_dev *rdev, int lim_uV, int severity,
if ((lim_uV && !enable) || (!lim_uV && enable))
return -EINVAL;
- ret = max597x_uvp_ovp_check_mode(rdev, severity);
+ ret = max5970_uvp_ovp_check_mode(rdev, severity);
if (ret)
return ret;
- return max597x_set_vp(rdev, lim_uV, severity, enable, false);
+ return max5970_set_vp(rdev, lim_uV, severity, enable, false);
}
-static int max597x_set_ovp(struct regulator_dev *rdev, int lim_uV, int severity,
+static int max5970_set_ovp(struct regulator_dev *rdev, int lim_uV, int severity,
bool enable)
{
int ret;
@@ -127,20 +127,20 @@ static int max597x_set_ovp(struct regulator_dev *rdev, int lim_uV, int severity,
if ((lim_uV && !enable) || (!lim_uV && enable))
return -EINVAL;
- ret = max597x_uvp_ovp_check_mode(rdev, severity);
+ ret = max5970_uvp_ovp_check_mode(rdev, severity);
if (ret)
return ret;
- return max597x_set_vp(rdev, lim_uV, severity, enable, true);
+ return max5970_set_vp(rdev, lim_uV, severity, enable, true);
}
-static int max597x_set_ocp(struct regulator_dev *rdev, int lim_uA,
+static int max5970_set_ocp(struct regulator_dev *rdev, int lim_uA,
int severity, bool enable)
{
int val, reg;
unsigned int vthst, vthfst;
- struct max597x_regulator *data = rdev_get_drvdata(rdev);
+ struct max5970_regulator *data = rdev_get_drvdata(rdev);
int rdev_id = rdev_get_id(rdev);
/*
* MAX5970 doesn't has enable control for ocp.
@@ -187,7 +187,7 @@ static int max597x_set_ocp(struct regulator_dev *rdev, int lim_uA,
return regmap_write(rdev->regmap, reg, val);
}
-static int max597x_get_status(struct regulator_dev *rdev)
+static int max5970_get_status(struct regulator_dev *rdev)
{
int val, ret;
@@ -208,21 +208,21 @@ static int max597x_get_status(struct regulator_dev *rdev)
return REGULATOR_STATUS_OFF;
}
-static const struct regulator_ops max597x_switch_ops = {
+static const struct regulator_ops max5970_switch_ops = {
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
- .get_status = max597x_get_status,
- .set_over_voltage_protection = max597x_set_ovp,
- .set_under_voltage_protection = max597x_set_uvp,
- .set_over_current_protection = max597x_set_ocp,
+ .get_status = max5970_get_status,
+ .set_over_voltage_protection = max5970_set_ovp,
+ .set_under_voltage_protection = max5970_set_uvp,
+ .set_over_current_protection = max5970_set_ocp,
};
-static int max597x_dt_parse(struct device_node *np,
+static int max5970_dt_parse(struct device_node *np,
const struct regulator_desc *desc,
struct regulator_config *cfg)
{
- struct max597x_regulator *data = cfg->driver_data;
+ struct max5970_regulator *data = cfg->driver_data;
int ret = 0;
ret =
@@ -236,26 +236,26 @@ static int max597x_dt_parse(struct device_node *np,
}
-#define MAX597X_SWITCH(_ID, _ereg, _chan, _supply) { \
+#define MAX5970_SWITCH(_ID, _ereg, _chan, _supply) { \
.name = #_ID, \
.of_match = of_match_ptr(#_ID), \
- .ops = &max597x_switch_ops, \
+ .ops = &max5970_switch_ops, \
.regulators_node = of_match_ptr("regulators"), \
.type = REGULATOR_VOLTAGE, \
- .id = MAX597X_##_ID, \
+ .id = MAX5970_##_ID, \
.owner = THIS_MODULE, \
.supply_name = _supply, \
.enable_reg = _ereg, \
.enable_mask = CHXEN((_chan)), \
- .of_parse_cb = max597x_dt_parse, \
+ .of_parse_cb = max5970_dt_parse, \
}
static const struct regulator_desc regulators[] = {
- MAX597X_SWITCH(SW0, MAX5970_REG_CHXEN, 0, "vss1"),
- MAX597X_SWITCH(SW1, MAX5970_REG_CHXEN, 1, "vss2"),
+ MAX5970_SWITCH(SW0, MAX5970_REG_CHXEN, 0, "vss1"),
+ MAX5970_SWITCH(SW1, MAX5970_REG_CHXEN, 1, "vss2"),
};
-static int max597x_regmap_read_clear(struct regmap *map, unsigned int reg,
+static int max5970_regmap_read_clear(struct regmap *map, unsigned int reg,
unsigned int *val)
{
int ret;
@@ -270,14 +270,14 @@ static int max597x_regmap_read_clear(struct regmap *map, unsigned int reg,
return 0;
}
-static int max597x_irq_handler(int irq, struct regulator_irq_data *rid,
+static int max5970_irq_handler(int irq, struct regulator_irq_data *rid,
unsigned long *dev_mask)
{
struct regulator_err_state *stat;
- struct max597x_regulator *d = (struct max597x_regulator *)rid->data;
+ struct max5970_regulator *d = (struct max5970_regulator *)rid->data;
int val, ret, i;
- ret = max597x_regmap_read_clear(d->regmap, MAX5970_REG_FAULT0, &val);
+ ret = max5970_regmap_read_clear(d->regmap, MAX5970_REG_FAULT0, &val);
if (ret)
return REGULATOR_FAILED_RETRY;
@@ -302,7 +302,7 @@ static int max597x_irq_handler(int irq, struct regulator_irq_data *rid,
}
}
- ret = max597x_regmap_read_clear(d->regmap, MAX5970_REG_FAULT1, &val);
+ ret = max5970_regmap_read_clear(d->regmap, MAX5970_REG_FAULT1, &val);
if (ret)
return REGULATOR_FAILED_RETRY;
@@ -320,7 +320,7 @@ static int max597x_irq_handler(int irq, struct regulator_irq_data *rid,
}
}
- ret = max597x_regmap_read_clear(d->regmap, MAX5970_REG_FAULT2, &val);
+ ret = max5970_regmap_read_clear(d->regmap, MAX5970_REG_FAULT2, &val);
if (ret)
return REGULATOR_FAILED_RETRY;
@@ -357,7 +357,7 @@ static int max597x_irq_handler(int irq, struct regulator_irq_data *rid,
return 0;
}
-static int max597x_adc_range(struct regmap *regmap, const int ch,
+static int max5970_adc_range(struct regmap *regmap, const int ch,
u32 *irng, u32 *mon_rng)
{
unsigned int reg;
@@ -391,14 +391,14 @@ static int max597x_adc_range(struct regmap *regmap, const int ch,
return 0;
}
-static int max597x_setup_irq(struct device *dev,
+static int max5970_setup_irq(struct device *dev,
int irq,
struct regulator_dev *rdevs[MAX5970_NUM_SWITCHES],
- int num_switches, struct max597x_regulator *data)
+ int num_switches, struct max5970_regulator *data)
{
- struct regulator_irq_desc max597x_notif = {
- .name = "max597x-irq",
- .map_event = max597x_irq_handler,
+ struct regulator_irq_desc max5970_notif = {
+ .name = "max5970-irq",
+ .map_event = max5970_irq_handler,
.data = data,
};
int errs = REGULATOR_ERROR_UNDER_VOLTAGE |
@@ -410,7 +410,7 @@ static int max597x_setup_irq(struct device *dev,
void *irq_helper;
/* Register notifiers - can fail if IRQ is not given */
- irq_helper = devm_regulator_irq_helper(dev, &max597x_notif,
+ irq_helper = devm_regulator_irq_helper(dev, &max5970_notif,
irq, 0, errs, NULL,
&rdevs[0], num_switches);
if (IS_ERR(irq_helper)) {
@@ -423,11 +423,11 @@ static int max597x_setup_irq(struct device *dev,
return 0;
}
-static int max597x_regulator_probe(struct platform_device *pdev)
+static int max5970_regulator_probe(struct platform_device *pdev)
{
- struct max597x_data *max597x;
+ struct max5970_data *max5970;
struct regmap *regmap = dev_get_regmap(pdev->dev.parent, NULL);
- struct max597x_regulator *data;
+ struct max5970_regulator *data;
struct i2c_client *i2c = to_i2c_client(pdev->dev.parent);
struct regulator_config config = { };
struct regulator_dev *rdev;
@@ -438,25 +438,25 @@ static int max597x_regulator_probe(struct platform_device *pdev)
if (!regmap)
return -EPROBE_DEFER;
- max597x = devm_kzalloc(&i2c->dev, sizeof(struct max597x_data), GFP_KERNEL);
- if (!max597x)
+ max5970 = devm_kzalloc(&i2c->dev, sizeof(struct max5970_data), GFP_KERNEL);
+ if (!max5970)
return -ENOMEM;
- i2c_set_clientdata(i2c, max597x);
+ i2c_set_clientdata(i2c, max5970);
if (of_device_is_compatible(i2c->dev.of_node, "maxim,max5978"))
- max597x->num_switches = MAX597x_TYPE_MAX5978;
+ max5970->num_switches = MAX5978_NUM_SWITCHES;
else if (of_device_is_compatible(i2c->dev.of_node, "maxim,max5970"))
- max597x->num_switches = MAX597x_TYPE_MAX5970;
+ max5970->num_switches = MAX5970_NUM_SWITCHES;
else
return -ENODEV;
- i2c_set_clientdata(i2c, max597x);
- num_switches = max597x->num_switches;
+ i2c_set_clientdata(i2c, max5970);
+ num_switches = max5970->num_switches;
for (i = 0; i < num_switches; i++) {
data =
- devm_kzalloc(&i2c->dev, sizeof(struct max597x_regulator),
+ devm_kzalloc(&i2c->dev, sizeof(struct max5970_regulator),
GFP_KERNEL);
if (!data)
return -ENOMEM;
@@ -464,12 +464,12 @@ static int max597x_regulator_probe(struct platform_device *pdev)
data->num_switches = num_switches;
data->regmap = regmap;
- ret = max597x_adc_range(regmap, i, &max597x->irng[i], &max597x->mon_rng[i]);
+ ret = max5970_adc_range(regmap, i, &max5970->irng[i], &max5970->mon_rng[i]);
if (ret < 0)
return ret;
- data->irng = max597x->irng[i];
- data->mon_rng = max597x->mon_rng[i];
+ data->irng = max5970->irng[i];
+ data->mon_rng = max5970->mon_rng[i];
config.dev = &i2c->dev;
config.driver_data = (void *)data;
@@ -482,12 +482,12 @@ static int max597x_regulator_probe(struct platform_device *pdev)
return PTR_ERR(rdev);
}
rdevs[i] = rdev;
- max597x->shunt_micro_ohms[i] = data->shunt_micro_ohms;
+ max5970->shunt_micro_ohms[i] = data->shunt_micro_ohms;
}
if (i2c->irq) {
ret =
- max597x_setup_irq(&i2c->dev, i2c->irq, rdevs, num_switches,
+ max5970_setup_irq(&i2c->dev, i2c->irq, rdevs, num_switches,
data);
if (ret) {
dev_err(&i2c->dev, "IRQ setup failed");
@@ -498,14 +498,14 @@ static int max597x_regulator_probe(struct platform_device *pdev)
return ret;
}
-static struct platform_driver max597x_regulator_driver = {
+static struct platform_driver max5970_regulator_driver = {
.driver = {
- .name = "max597x-regulator",
+ .name = "max5970-regulator",
},
- .probe = max597x_regulator_probe,
+ .probe = max5970_regulator_probe,
};
-module_platform_driver(max597x_regulator_driver);
+module_platform_driver(max5970_regulator_driver);
MODULE_AUTHOR("Patrick Rudolph <[email protected]>");
--
2.39.1
On Thu, Apr 27, 2023 at 01:30:46PM +0200, Naresh Solanki wrote:
> The previous version of this driver included wildcards in file names and
> descriptions. This patch renames the driver to only support MAX5970 and
> MAX5978, which are the only chips that the driver actually supports.
Acked-by: Mark Brown <[email protected]>
On Thu, 27 Apr 2023, Naresh Solanki wrote:
> The previous version of this driver included wildcards in file names and
> descriptions. This patch renames the driver to only support MAX5970 and
> MAX5978, which are the only chips that the driver actually supports.
>
> Signed-off-by: Naresh Solanki <[email protected]>
> ---
> drivers/regulator/Kconfig | 6 +-
> drivers/regulator/Makefile | 2 +-
> ...ax597x-regulator.c => max5970-regulator.c} | 126 +++++++++---------
> 3 files changed, 67 insertions(+), 67 deletions(-)
> rename drivers/regulator/{max597x-regulator.c => max5970-regulator.c} (76%)
This does not apply cleanly. Rather than mess you around, I'll apply
the MFD driver and provide a PR for Mark. Perhaps this will apply to
the regulator tree.
Testing now - please stand-by.
--
Lee Jones [李琼斯]