This series adds the R5F cluster and C71 DSP processor nodes for
J784S4 SoC.
The first patch adds R5F cluster nodes to the MAIN and MCU voltage
domains of J784S4 SoC. The second patch adds the C71 DSP processor
nodes to the MAIN voltage domain of J784S4 SoC and the third patch
reserves the IPC shared memory for Virtio/Vring buffers.
Changes in V3:
- Add memory reservations for remote proc IPC in board file.
V2: https://lore.kernel.org/all/[email protected]/
Changes in V2:
- Removed default disable of R5F nodes in the SoC device tree.
- Consolidated R5F nodes into one patch.
V1: https://lore.kernel.org/all/[email protected]/
Hari Nagalla (3):
arm64: dts: ti: k3-j784s4-main: Add R5F cluster nodes
arm64: dts: ti: k3-j784s4-main: Add C71x DSP nodes
arm64: dts: ti: k3-j784s4-evm: Reserve memory for remote proc IPC
arch/arm64/boot/dts/ti/k3-j784s4-evm.dts | 318 ++++++++++++++++++
arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi | 168 +++++++++
.../boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi | 40 +++
3 files changed, 526 insertions(+)
--
2.34.1
The J784S4 SoCs have four TMS320C71x DSP subsystems in the MAIN voltage
domain. The functionality of these DSP subsystems is similar to the C71x
DSP subsystems on earlier k3 device J721S2. Each subsystem has a 48 KB of
L1D configurable SRAM/Cache and 512 KB of L2 SRAM/Cache. This subsystem
has a CMMU but is not currently used. The inter-processor communication
between the main A72 cores and the C71x DSPs is achieved through shared
memory and mailboxes. Add the DT nodes for these DSP processor sub-systems.
Signed-off-by: Hari Nagalla <[email protected]>
---
arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi | 48 ++++++++++++++++++++++
1 file changed, 48 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
index 3c785cef4f20..7277bf6eda09 100644
--- a/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
@@ -1232,4 +1232,52 @@ main_r5fss2_core1: r5f@5a00000 {
ti,loczrama = <1>;
};
};
+
+ c71_0: dsp@64800000 {
+ compatible = "ti,j721s2-c71-dsp";
+ reg = <0x00 0x64800000 0x00 0x00080000>,
+ <0x00 0x64e00000 0x00 0x0000c000>;
+ reg-names = "l2sram", "l1dram";
+ ti,sci = <&sms>;
+ ti,sci-dev-id = <30>;
+ ti,sci-proc-ids = <0x30 0xff>;
+ resets = <&k3_reset 30 1>;
+ firmware-name = "j784s4-c71_0-fw";
+ };
+
+ c71_1: dsp@65800000 {
+ compatible = "ti,j721s2-c71-dsp";
+ reg = <0x00 0x65800000 0x00 0x00080000>,
+ <0x00 0x65e00000 0x00 0x0000c000>;
+ reg-names = "l2sram", "l1dram";
+ ti,sci = <&sms>;
+ ti,sci-dev-id = <33>;
+ ti,sci-proc-ids = <0x31 0xff>;
+ resets = <&k3_reset 33 1>;
+ firmware-name = "j784s4-c71_1-fw";
+ };
+
+ c71_2: dsp@66800000 {
+ compatible = "ti,j721s2-c71-dsp";
+ reg = <0x00 0x66800000 0x00 0x00080000>,
+ <0x00 0x66e00000 0x00 0x0000c000>;
+ reg-names = "l2sram", "l1dram";
+ ti,sci = <&sms>;
+ ti,sci-dev-id = <37>;
+ ti,sci-proc-ids = <0x32 0xff>;
+ resets = <&k3_reset 37 1>;
+ firmware-name = "j784s4-c71_2-fw";
+ };
+
+ c71_3: dsp@67800000 {
+ compatible = "ti,j721s2-c71-dsp";
+ reg = <0x00 0x67800000 0x00 0x00080000>,
+ <0x00 0x67e00000 0x00 0x0000c000>;
+ reg-names = "l2sram", "l1dram";
+ ti,sci = <&sms>;
+ ti,sci-dev-id = <40>;
+ ti,sci-proc-ids = <0x33 0xff>;
+ resets = <&k3_reset 40 1>;
+ firmware-name = "j784s4-c71_3-fw";
+ };
};
--
2.34.1
Reserve memory for remote processors. Two memory regions are reserved
for each remote processor. The first 1Mb region is used for virtio
Vring buffers for IPC and the second region is used for holding
resource table, trace buffer and as external memory to the remote
processor. The mailboxes are also assigned for each remote processor.
Signed-off-by: Hari Nagalla <[email protected]>
---
arch/arm64/boot/dts/ti/k3-j784s4-evm.dts | 318 +++++++++++++++++++++++
1 file changed, 318 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts b/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
index f33815953e77..1200cc677eb6 100644
--- a/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
+++ b/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
@@ -42,6 +42,150 @@ secure_ddr: optee@9e800000 {
reg = <0x00 0x9e800000 0x00 0x01800000>;
no-map;
};
+
+ mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa0000000 0x00 0x100000>;
+ no-map;
+ };
+
+ mcu_r5fss0_core0_memory_region: r5f-memory@a0100000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa0100000 0x00 0xf00000>;
+ no-map;
+ };
+
+ mcu_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa1000000 0x00 0x100000>;
+ no-map;
+ };
+
+ mcu_r5fss0_core1_memory_region: r5f-memory@a1100000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa1100000 0x00 0xf00000>;
+ no-map;
+ };
+
+ main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a2000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa2000000 0x00 0x100000>;
+ no-map;
+ };
+
+ main_r5fss0_core0_memory_region: r5f-memory@a2100000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa2100000 0x00 0xf00000>;
+ no-map;
+ };
+
+ main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a3000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa3000000 0x00 0x100000>;
+ no-map;
+ };
+
+ main_r5fss0_core1_memory_region: r5f-memory@a3100000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa3100000 0x00 0xf00000>;
+ no-map;
+ };
+
+ main_r5fss1_core0_dma_memory_region: r5f-dma-memory@a4000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa4000000 0x00 0x100000>;
+ no-map;
+ };
+
+ main_r5fss1_core0_memory_region: r5f-memory@a4100000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa4100000 0x00 0xf00000>;
+ no-map;
+ };
+
+ main_r5fss1_core1_dma_memory_region: r5f-dma-memory@a5000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa5000000 0x00 0x100000>;
+ no-map;
+ };
+
+ main_r5fss1_core1_memory_region: r5f-memory@a5100000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa5100000 0x00 0xf00000>;
+ no-map;
+ };
+
+ main_r5fss2_core0_dma_memory_region: r5f-dma-memory@a6000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa6000000 0x00 0x100000>;
+ no-map;
+ };
+
+ main_r5fss2_core0_memory_region: r5f-memory@a6100000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa6100000 0x00 0xf00000>;
+ no-map;
+ };
+
+ main_r5fss2_core1_dma_memory_region: r5f-dma-memory@a7000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa7000000 0x00 0x100000>;
+ no-map;
+ };
+
+ main_r5fss2_core1_memory_region: r5f-memory@a7100000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa7100000 0x00 0xf00000>;
+ no-map;
+ };
+
+ c71_0_dma_memory_region: c71-dma-memory@a8000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa8000000 0x00 0x100000>;
+ no-map;
+ };
+
+ c71_0_memory_region: c71-memory@a8100000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa8100000 0x00 0xf00000>;
+ no-map;
+ };
+
+ c71_1_dma_memory_region: c71-dma-memory@a9000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa9000000 0x00 0x100000>;
+ no-map;
+ };
+
+ c71_1_memory_region: c71-memory@a9100000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa9100000 0x00 0xf00000>;
+ no-map;
+ };
+
+ c71_2_dma_memory_region: c71-dma-memory@aa000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xaa000000 0x00 0x100000>;
+ no-map;
+ };
+
+ c71_2_memory_region: c71-memory@aa100000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xaa100000 0x00 0xf00000>;
+ no-map;
+ };
+
+ c71_3_dma_memory_region: c71-dma-memory@ab000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xab000000 0x00 0x100000>;
+ no-map;
+ };
+
+ c71_3_memory_region: c71-memory@ab100000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xab100000 0x00 0xf00000>;
+ no-map;
+ };
};
evm_12v0: regulator-evm12v0 {
@@ -253,3 +397,177 @@ &mcu_cpsw_port1 {
phy-mode = "rgmii-rxid";
phy-handle = <&mcu_phy0>;
};
+
+&mailbox0_cluster0 {
+ status = "okay";
+ interrupts = <436>;
+
+ mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 {
+ ti,mbox-rx = <0 0 0>;
+ ti,mbox-tx = <1 0 0>;
+ };
+
+ mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 {
+ ti,mbox-rx = <2 0 0>;
+ ti,mbox-tx = <3 0 0>;
+ };
+};
+
+&mailbox0_cluster1 {
+ status = "okay";
+ interrupts = <432>;
+
+ mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 {
+ ti,mbox-rx = <0 0 0>;
+ ti,mbox-tx = <1 0 0>;
+ };
+
+ mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 {
+ ti,mbox-rx = <2 0 0>;
+ ti,mbox-tx = <3 0 0>;
+ };
+};
+
+&mailbox0_cluster2 {
+ status = "okay";
+ interrupts = <428>;
+
+ mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 {
+ ti,mbox-rx = <0 0 0>;
+ ti,mbox-tx = <1 0 0>;
+ };
+
+ mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 {
+ ti,mbox-rx = <2 0 0>;
+ ti,mbox-tx = <3 0 0>;
+ };
+};
+
+&mailbox0_cluster3 {
+ status = "okay";
+ interrupts = <424>;
+
+ mbox_main_r5fss2_core0: mbox-main-r5fss2-core0 {
+ ti,mbox-rx = <0 0 0>;
+ ti,mbox-tx = <1 0 0>;
+ };
+
+ mbox_main_r5fss2_core1: mbox-main-r5fss2-core1 {
+ ti,mbox-rx = <2 0 0>;
+ ti,mbox-tx = <3 0 0>;
+ };
+};
+
+&mailbox0_cluster4 {
+ status = "okay";
+ interrupts = <420>;
+
+ mbox_c71_0: mbox-c71-0 {
+ ti,mbox-rx = <0 0 0>;
+ ti,mbox-tx = <1 0 0>;
+ };
+
+ mbox_c71_1: mbox-c71-1 {
+ ti,mbox-rx = <2 0 0>;
+ ti,mbox-tx = <3 0 0>;
+ };
+};
+
+&mailbox0_cluster5 {
+ status = "okay";
+ interrupts = <416>;
+
+ mbox_c71_2: mbox-c71-2 {
+ ti,mbox-rx = <0 0 0>;
+ ti,mbox-tx = <1 0 0>;
+ };
+
+ mbox_c71_3: mbox-c71-3 {
+ ti,mbox-rx = <2 0 0>;
+ ti,mbox-tx = <3 0 0>;
+ };
+};
+
+&mcu_r5fss0_core0 {
+ status = "okay";
+ mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>;
+ memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
+ <&mcu_r5fss0_core0_memory_region>;
+};
+
+&mcu_r5fss0_core1 {
+ status = "okay";
+ mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core1>;
+ memory-region = <&mcu_r5fss0_core1_dma_memory_region>,
+ <&mcu_r5fss0_core1_memory_region>;
+};
+
+&main_r5fss0_core0 {
+ status = "okay";
+ mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core0>;
+ memory-region = <&main_r5fss0_core0_dma_memory_region>,
+ <&main_r5fss0_core0_memory_region>;
+};
+
+&main_r5fss0_core1 {
+ status = "okay";
+ mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core1>;
+ memory-region = <&main_r5fss0_core1_dma_memory_region>,
+ <&main_r5fss0_core1_memory_region>;
+};
+
+&main_r5fss1_core0 {
+ status = "okay";
+ mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core0>;
+ memory-region = <&main_r5fss1_core0_dma_memory_region>,
+ <&main_r5fss1_core0_memory_region>;
+};
+
+&main_r5fss1_core1 {
+ status = "okay";
+ mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core1>;
+ memory-region = <&main_r5fss1_core1_dma_memory_region>,
+ <&main_r5fss1_core1_memory_region>;
+};
+
+&main_r5fss2_core0 {
+ status = "okay";
+ mboxes = <&mailbox0_cluster3 &mbox_main_r5fss2_core0>;
+ memory-region = <&main_r5fss2_core0_dma_memory_region>,
+ <&main_r5fss2_core0_memory_region>;
+};
+
+&main_r5fss2_core1 {
+ status = "okay";
+ mboxes = <&mailbox0_cluster3 &mbox_main_r5fss2_core1>;
+ memory-region = <&main_r5fss2_core1_dma_memory_region>,
+ <&main_r5fss2_core1_memory_region>;
+};
+
+&c71_0 {
+ status = "okay";
+ mboxes = <&mailbox0_cluster4 &mbox_c71_0>;
+ memory-region = <&c71_0_dma_memory_region>,
+ <&c71_0_memory_region>;
+};
+
+&c71_1 {
+ status = "okay";
+ mboxes = <&mailbox0_cluster4 &mbox_c71_1>;
+ memory-region = <&c71_1_dma_memory_region>,
+ <&c71_1_memory_region>;
+};
+
+&c71_2 {
+ status = "okay";
+ mboxes = <&mailbox0_cluster5 &mbox_c71_2>;
+ memory-region = <&c71_2_dma_memory_region>,
+ <&c71_2_memory_region>;
+};
+
+&c71_3 {
+ status = "okay";
+ mboxes = <&mailbox0_cluster5 &mbox_c71_3>;
+ memory-region = <&c71_3_dma_memory_region>,
+ <&c71_3_memory_region>;
+};
--
2.34.1
The J784S4 SoCs have 4 dual-core Arm Cortex-R5F processor (R5FSS)
subsystems/clusters. One R5F cluster (MCU_R5FSS0) is present within
the MCU domain, and the remaining three clusters are present in the
MAIN domain (MAIN_R5FSS0, MAIN_R5FSS1 & MAIN_R5FSS2). The functionality
of the R5FSS is same as the R5FSS functionality on earlier K3 platform
device J721S2. Each of the R5FSS can be configured at boot time to be
either run in a LockStep mode or in an Asymmetric Multi Processing (AMP)
fashion in Split-mode. These subsystems have 64 KB each Tightly-Coupled
Memory (TCM) internal memories for each core split between two banks -
ATCM and BTCM (further interleaved into two banks). There are some IP
integration differences from standard Arm R5 clusters such as the absence
of an ACP port, presence of an additional TI-specific Region Address
Translater (RAT) module for translating 32-bit CPU addresses into
larger system bus addresses etc.
Add the DT nodes for the R5F cluster/subsystems, the two R5F cores are
each added as child nodes to the corresponding cluster node. The clusters
are configured to run in LockStep mode by default, with the ATCMs enabled
to allow the R5 cores to execute code from DDR with boot-strapping code
from ATCM. The inter-processor communication between the main A72 cores
and these processors is achieved through shared memory and Mailboxes.
The following firmware names are used by default for these cores, and
can be overridden in a board dts file if needed:
MAIN R5FSS0 Core0: j784s4-main-r5f0_0-fw (both in LockStep and Split modes)
MAIN R5FSS0 Core1: j784s4-main-r5f0_1-fw (needed only in Split mode)
MAIN R5FSS1 Core0: j784s4-main-r5f1_0-fw (both in LockStep and Split modes)
MAIN R5FSS1 Core1: j784s4-main-r5f1_1-fw (needed only in Split mode)
MAIN R5FSS2 Core0: j784s4-main-r5f2_0-fw (both in LockStep and Split modes)
MAIN R5FSS2 Core1: j784s4-main-r5f2_1-fw (needed only in Split mode)
MCU R5FSS0 Core0: j784s4-mcu-r5f0_0-fw (needed only in Split mode)
MCU R5FSS0 Core1: j784s4-mcu-r5f0_1-fw (needed only in Split mode)
Signed-off-by: Hari Nagalla <[email protected]>
---
arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi | 120 ++++++++++++++++++
.../boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi | 40 ++++++
2 files changed, 160 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
index e9169eb358c1..3c785cef4f20 100644
--- a/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
@@ -1112,4 +1112,124 @@ main_spi7: spi@2170000 {
clocks = <&k3_clks 383 1>;
status = "disabled";
};
+
+ main_r5fss0: r5fss@5c00000 {
+ compatible = "ti,j721s2-r5fss";
+ ti,cluster-mode = <1>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x5c00000 0x00 0x5c00000 0x20000>,
+ <0x5d00000 0x00 0x5d00000 0x20000>;
+ power-domains = <&k3_pds 336 TI_SCI_PD_EXCLUSIVE>;
+
+ main_r5fss0_core0: r5f@5c00000 {
+ compatible = "ti,j721s2-r5f";
+ reg = <0x5c00000 0x00010000>,
+ <0x5c10000 0x00010000>;
+ reg-names = "atcm", "btcm";
+ ti,sci = <&sms>;
+ ti,sci-dev-id = <339>;
+ ti,sci-proc-ids = <0x06 0xff>;
+ resets = <&k3_reset 339 1>;
+ firmware-name = "j784s4-main-r5f0_0-fw";
+ ti,atcm-enable = <1>;
+ ti,btcm-enable = <1>;
+ ti,loczrama = <1>;
+ };
+
+ main_r5fss0_core1: r5f@5d00000 {
+ compatible = "ti,j721s2-r5f";
+ reg = <0x5d00000 0x00010000>,
+ <0x5d10000 0x00010000>;
+ reg-names = "atcm", "btcm";
+ ti,sci = <&sms>;
+ ti,sci-dev-id = <340>;
+ ti,sci-proc-ids = <0x07 0xff>;
+ resets = <&k3_reset 340 1>;
+ firmware-name = "j784s4-main-r5f0_1-fw";
+ ti,atcm-enable = <1>;
+ ti,btcm-enable = <1>;
+ ti,loczrama = <1>;
+ };
+ };
+
+ main_r5fss1: r5fss@5e00000 {
+ compatible = "ti,j721s2-r5fss";
+ ti,cluster-mode = <1>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x5e00000 0x00 0x5e00000 0x20000>,
+ <0x5f00000 0x00 0x5f00000 0x20000>;
+ power-domains = <&k3_pds 337 TI_SCI_PD_EXCLUSIVE>;
+
+ main_r5fss1_core0: r5f@5e00000 {
+ compatible = "ti,j721s2-r5f";
+ reg = <0x5e00000 0x00010000>,
+ <0x5e10000 0x00010000>;
+ reg-names = "atcm", "btcm";
+ ti,sci = <&sms>;
+ ti,sci-dev-id = <341>;
+ ti,sci-proc-ids = <0x08 0xff>;
+ resets = <&k3_reset 341 1>;
+ firmware-name = "j784s4-main-r5f1_0-fw";
+ ti,atcm-enable = <1>;
+ ti,btcm-enable = <1>;
+ ti,loczrama = <1>;
+ };
+
+ main_r5fss1_core1: r5f@5f00000 {
+ compatible = "ti,j721s2-r5f";
+ reg = <0x5f00000 0x00010000>,
+ <0x5f10000 0x00010000>;
+ reg-names = "atcm", "btcm";
+ ti,sci = <&sms>;
+ ti,sci-dev-id = <342>;
+ ti,sci-proc-ids = <0x09 0xff>;
+ resets = <&k3_reset 342 1>;
+ firmware-name = "j784s4-main-r5f1_1-fw";
+ ti,atcm-enable = <1>;
+ ti,btcm-enable = <1>;
+ ti,loczrama = <1>;
+ };
+ };
+
+ main_r5fss2: r5fss@5900000 {
+ compatible = "ti,j721s2-r5fss";
+ ti,cluster-mode = <1>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x5900000 0x00 0x5900000 0x20000>,
+ <0x5a00000 0x00 0x5a00000 0x20000>;
+ power-domains = <&k3_pds 338 TI_SCI_PD_EXCLUSIVE>;
+
+ main_r5fss2_core0: r5f@5900000 {
+ compatible = "ti,j721s2-r5f";
+ reg = <0x5900000 0x00010000>,
+ <0x5910000 0x00010000>;
+ reg-names = "atcm", "btcm";
+ ti,sci = <&sms>;
+ ti,sci-dev-id = <343>;
+ ti,sci-proc-ids = <0x0a 0xff>;
+ resets = <&k3_reset 343 1>;
+ firmware-name = "j784s4-main-r5f2_0-fw";
+ ti,atcm-enable = <1>;
+ ti,btcm-enable = <1>;
+ ti,loczrama = <1>;
+ };
+
+ main_r5fss2_core1: r5f@5a00000 {
+ compatible = "ti,j721s2-r5f";
+ reg = <0x5a00000 0x00010000>,
+ <0x5a10000 0x00010000>;
+ reg-names = "atcm", "btcm";
+ ti,sci = <&sms>;
+ ti,sci-dev-id = <344>;
+ ti,sci-proc-ids = <0x0b 0xff>;
+ resets = <&k3_reset 344 1>;
+ firmware-name = "j784s4-main-r5f2_1-fw";
+ ti,atcm-enable = <1>;
+ ti,btcm-enable = <1>;
+ ti,loczrama = <1>;
+ };
+ };
};
diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi
index f04fcb614cbe..e517043d3eb2 100644
--- a/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi
@@ -342,4 +342,44 @@ cpts@3d000 {
ti,cpts-periodic-outputs = <2>;
};
};
+
+ mcu_r5fss0: r5fss@41000000 {
+ compatible = "ti,j721s2-r5fss";
+ ti,cluster-mode = <1>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x41000000 0x00 0x41000000 0x20000>,
+ <0x41400000 0x00 0x41400000 0x20000>;
+ power-domains = <&k3_pds 345 TI_SCI_PD_EXCLUSIVE>;
+
+ mcu_r5fss0_core0: r5f@41000000 {
+ compatible = "ti,j721s2-r5f";
+ reg = <0x41000000 0x00010000>,
+ <0x41010000 0x00010000>;
+ reg-names = "atcm", "btcm";
+ ti,sci = <&sms>;
+ ti,sci-dev-id = <346>;
+ ti,sci-proc-ids = <0x01 0xff>;
+ resets = <&k3_reset 346 1>;
+ firmware-name = "j784s4-mcu-r5f0_0-fw";
+ ti,atcm-enable = <1>;
+ ti,btcm-enable = <1>;
+ ti,loczrama = <1>;
+ };
+
+ mcu_r5fss0_core1: r5f@41400000 {
+ compatible = "ti,j721s2-r5f";
+ reg = <0x41400000 0x00010000>,
+ <0x41410000 0x00010000>;
+ reg-names = "atcm", "btcm";
+ ti,sci = <&sms>;
+ ti,sci-dev-id = <347>;
+ ti,sci-proc-ids = <0x02 0xff>;
+ resets = <&k3_reset 347 1>;
+ firmware-name = "j784s4-mcu-r5f0_1-fw";
+ ti,atcm-enable = <1>;
+ ti,btcm-enable = <1>;
+ ti,loczrama = <1>;
+ };
+ };
};
--
2.34.1
Hi Hari Nagalla,
On Tue, 02 May 2023 18:15:24 -0500, Hari Nagalla wrote:
> This series adds the R5F cluster and C71 DSP processor nodes for
> J784S4 SoC.
>
> The first patch adds R5F cluster nodes to the MAIN and MCU voltage
> domains of J784S4 SoC. The second patch adds the C71 DSP processor
> nodes to the MAIN voltage domain of J784S4 SoC and the third patch
> reserves the IPC shared memory for Virtio/Vring buffers.
>
> [...]
I have applied the following to branch ti-k3-dts-next on [1].
Thank you!
[1/3] arm64: dts: ti: k3-j784s4-main: Add R5F cluster nodes
commit: 7e5fd896c3d1ecf7b806f5fd42245c1135fe878d
[2/3] arm64: dts: ti: k3-j784s4-main: Add C71x DSP nodes
commit: 257d206b6d117d8e40742dc17ae02406747753ad
[3/3] arm64: dts: ti: k3-j784s4-evm: Reserve memory for remote proc IPC
commit: ba12d4dde708de01d3cae5ae368a930ec5f5fd07
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent up the chain during
the next merge window (or sooner if it is a relevant bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux.git
--
Vignesh