This adds SEAMA compatibles to the firmware partition of these
two D-Link devices.
Signed-off-by: Linus Walleij <[email protected]>
---
arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts | 1 +
arch/arm/boot/dts/bcm47094-dlink-dir-890l.dts | 1 +
2 files changed, 2 insertions(+)
diff --git a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
index 555fbe41dd8f..cf3000b07eea 100644
--- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
@@ -33,6 +33,7 @@ partitions {
#size-cells = <1>;
partition@0 {
+ compatible = "seama";
label = "firmware";
reg = <0x00000000 0x08000000>;
};
diff --git a/arch/arm/boot/dts/bcm47094-dlink-dir-890l.dts b/arch/arm/boot/dts/bcm47094-dlink-dir-890l.dts
index d945a20b06e0..3551f855ff20 100644
--- a/arch/arm/boot/dts/bcm47094-dlink-dir-890l.dts
+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-890l.dts
@@ -149,6 +149,7 @@ partitions {
* partitions: this device uses SEAMA.
*/
firmware@0 {
+ compatible = "seama";
label = "firmware";
reg = <0x00000000 0x08000000>;
};
--
2.34.1