After reading the data from the DEVICE_ID register, mask 0x0f needs to be
applied to extract the revision of the chip [1].
The other part of the DEVICE_ID register, mask 0xf0, is a vendor identification
code. That's how it is set up at similar products of Richtek, e.g. RT9455 [2]
page 21 top.
[1] https://github.com/msm8916-mainline/linux-downstream/blob/GT-I9195I/drivers/mfd/rt5033_core.c#L484
[2] https://www.richtek.com/assets/product_file/RT9455/DS9455-00.pdf
Signed-off-by: Jakob Hauser <[email protected]>
---
drivers/mfd/rt5033.c | 5 +++--
include/linux/mfd/rt5033-private.h | 4 ++++
2 files changed, 7 insertions(+), 2 deletions(-)
diff --git a/drivers/mfd/rt5033.c b/drivers/mfd/rt5033.c
index 8029d444b794..3eee4242ee02 100644
--- a/drivers/mfd/rt5033.c
+++ b/drivers/mfd/rt5033.c
@@ -55,7 +55,7 @@ static const struct regmap_config rt5033_regmap_config = {
static int rt5033_i2c_probe(struct i2c_client *i2c)
{
struct rt5033_dev *rt5033;
- unsigned int dev_id;
+ unsigned int dev_id, chip_rev;
int ret;
rt5033 = devm_kzalloc(&i2c->dev, sizeof(*rt5033), GFP_KERNEL);
@@ -78,7 +78,8 @@ static int rt5033_i2c_probe(struct i2c_client *i2c)
dev_err(&i2c->dev, "Device not found\n");
return -ENODEV;
}
- dev_info(&i2c->dev, "Device found Device ID: %04x\n", dev_id);
+ chip_rev = dev_id & RT5033_CHIP_REV_MASK;
+ dev_info(&i2c->dev, "Device found (rev. %d)\n", chip_rev);
ret = regmap_add_irq_chip(rt5033->regmap, rt5033->irq,
IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
diff --git a/include/linux/mfd/rt5033-private.h b/include/linux/mfd/rt5033-private.h
index 6bb432f6a96c..b035a67cec73 100644
--- a/include/linux/mfd/rt5033-private.h
+++ b/include/linux/mfd/rt5033-private.h
@@ -71,6 +71,10 @@ enum rt5033_reg {
/* RT5033 CHGCTRL2 register */
#define RT5033_CHGCTRL2_CV_MASK 0xfc
+/* RT5033 DEVICE_ID register */
+#define RT5033_VENDOR_ID_MASK 0xf0
+#define RT5033_CHIP_REV_MASK 0x0f
+
/* RT5033 CHGCTRL3 register */
#define RT5033_CHGCTRL3_CFO_EN_MASK 0x40
#define RT5033_CHGCTRL3_TIMER_MASK 0x38
--
2.39.2