Convert Broadcom Kona family Secure Monitor bounce buffer bindings
to DT schema.
Changes during conversion:
- move from misc to firmware subdirectory
- add used, but previously undocumented SoC-specific compatibles
- drop deprecated compatibles (they've been deprecated for ~10 years)
Signed-off-by: Stanislav Jakubek <[email protected]>
---
Changes in V2:
- move to firmware subdirectory (Krzysztof)
- drop deprecated compatibles (Krzysztof)
- adjusted commit message to reflect the above changes
.../bindings/firmware/brcm,kona-smc.yaml | 40 +++++++++++++++++++
.../bindings/misc/brcm,kona-smc.txt | 15 -------
2 files changed, 40 insertions(+), 15 deletions(-)
create mode 100644 Documentation/devicetree/bindings/firmware/brcm,kona-smc.yaml
delete mode 100644 Documentation/devicetree/bindings/misc/brcm,kona-smc.txt
diff --git a/Documentation/devicetree/bindings/firmware/brcm,kona-smc.yaml b/Documentation/devicetree/bindings/firmware/brcm,kona-smc.yaml
new file mode 100644
index 000000000000..16c7928a0daa
--- /dev/null
+++ b/Documentation/devicetree/bindings/firmware/brcm,kona-smc.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/firmware/brcm,kona-smc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom Kona family Secure Monitor bounce buffer
+
+description:
+ A bounce buffer used for non-secure to secure communications.
+
+maintainers:
+ - Florian Fainelli <[email protected]>
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - brcm,bcm11351-smc
+ - brcm,bcm21664-smc
+ - brcm,bcm23550-smc
+ - const: brcm,kona-smc
+
+ reg:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ smc@3404c000 {
+ compatible = "brcm,bcm11351-smc", "brcm,kona-smc";
+ reg = <0x3404c000 0x400>; /* 1 KiB in SRAM */
+ };
+...
diff --git a/Documentation/devicetree/bindings/misc/brcm,kona-smc.txt b/Documentation/devicetree/bindings/misc/brcm,kona-smc.txt
deleted file mode 100644
index 05b47232ed9e..000000000000
--- a/Documentation/devicetree/bindings/misc/brcm,kona-smc.txt
+++ /dev/null
@@ -1,15 +0,0 @@
-Broadcom Secure Monitor Bounce buffer
------------------------------------------------------
-This binding defines the location of the bounce buffer
-used for non-secure to secure communications.
-
-Required properties:
-- compatible : "brcm,kona-smc"
-- DEPRECATED: compatible : "bcm,kona-smc"
-- reg : Location and size of bounce buffer
-
-Example:
- smc@3404c000 {
- compatible = "brcm,bcm11351-smc", "brcm,kona-smc";
- reg = <0x3404c000 0x400>; //1 KiB in SRAM
- };
--
2.25.1
On Mon, 08 May 2023 10:10:53 +0200, Stanislav Jakubek wrote:
> Convert Broadcom Kona family Secure Monitor bounce buffer bindings
> to DT schema.
>
> Changes during conversion:
> - move from misc to firmware subdirectory
> - add used, but previously undocumented SoC-specific compatibles
> - drop deprecated compatibles (they've been deprecated for ~10 years)
>
> Signed-off-by: Stanislav Jakubek <[email protected]>
> ---
>
> Changes in V2:
> - move to firmware subdirectory (Krzysztof)
> - drop deprecated compatibles (Krzysztof)
> - adjusted commit message to reflect the above changes
>
> .../bindings/firmware/brcm,kona-smc.yaml | 40 +++++++++++++++++++
> .../bindings/misc/brcm,kona-smc.txt | 15 -------
> 2 files changed, 40 insertions(+), 15 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/firmware/brcm,kona-smc.yaml
> delete mode 100644 Documentation/devicetree/bindings/misc/brcm,kona-smc.txt
>
My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):
yamllint warnings/errors:
dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/i2c/ovti,ov2685.example.dtb: camera-sensor@3c: port:endpoint:data-lanes: [[1]] is too short
From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/i2c/ovti,ov2685.yaml
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/rockchip-isp1.example.dtb: camera@3c: port:endpoint:data-lanes: [[1]] is too short
From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/i2c/ovti,ov2685.yaml
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-ep.example.dtb: pcie-ep@33800000: Unevaluated properties are not allowed ('assigned-clock-parents', 'assigned-clock-rates', 'assigned-clocks' were unexpected)
From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-ep.yaml
doc reference errors (make refcheckdocs):
Documentation/usb/gadget_uvc.rst: Documentation/userspace-api/media/v4l/pixfmt-packed.yuv.rst
MAINTAINERS: Documentation/devicetree/bindings/pwm/pwm-apple.yaml
See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230508081053.GA4675@standask-GA-A55M-S2HP
The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:
pip3 install dtschema --upgrade
Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.
On 08/05/2023 10:10, Stanislav Jakubek wrote:
> Convert Broadcom Kona family Secure Monitor bounce buffer bindings
> to DT schema.
>
> Changes during conversion:
> - move from misc to firmware subdirectory
> - add used, but previously undocumented SoC-specific compatibles
> - drop deprecated compatibles (they've been deprecated for ~10 years)
>
> Signed-off-by: Stanislav Jakubek <[email protected]>
> ---
>
> Changes in V2:
> - move to firmware subdirectory (Krzysztof)
> - drop deprecated compatibles (Krzysztof)
> - adjusted commit message to reflect the above changes
>
> .../bindings/firmware/brcm,kona-smc.yaml | 40 +++++++++++++++++++
> .../bindings/misc/brcm,kona-smc.txt | 15 -------
> 2 files changed, 40 insertions(+), 15 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/firmware/brcm,kona-smc.yaml
> delete mode 100644 Documentation/devicetree/bindings/misc/brcm,kona-smc.txt
>
> diff --git a/Documentation/devicetree/bindings/firmware/brcm,kona-smc.yaml b/Documentation/devicetree/bindings/firmware/brcm,kona-smc.yaml
> new file mode 100644
> index 000000000000..16c7928a0daa
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/firmware/brcm,kona-smc.yaml
> @@ -0,0 +1,40 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/firmware/brcm,kona-smc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Broadcom Kona family Secure Monitor bounce buffer
> +
> +description:
> + A bounce buffer used for non-secure to secure communications.
> +
> +maintainers:
> + - Florian Fainelli <[email protected]>
> +
> +properties:
> + compatible:
> + oneOf:
You do not need oneOf.
Best regards,
Krzysztof
On Mon, May 08, 2023 at 11:23:52AM +0200, Krzysztof Kozlowski wrote:
> On 08/05/2023 10:10, Stanislav Jakubek wrote:
> > Convert Broadcom Kona family Secure Monitor bounce buffer bindings
> > to DT schema.
> >
> > Changes during conversion:
> > - move from misc to firmware subdirectory
> > - add used, but previously undocumented SoC-specific compatibles
> > - drop deprecated compatibles (they've been deprecated for ~10 years)
> >
> > Signed-off-by: Stanislav Jakubek <[email protected]>
> > ---
> >
> > Changes in V2:
> > - move to firmware subdirectory (Krzysztof)
> > - drop deprecated compatibles (Krzysztof)
> > - adjusted commit message to reflect the above changes
> >
> > .../bindings/firmware/brcm,kona-smc.yaml | 40 +++++++++++++++++++
> > .../bindings/misc/brcm,kona-smc.txt | 15 -------
> > 2 files changed, 40 insertions(+), 15 deletions(-)
> > create mode 100644 Documentation/devicetree/bindings/firmware/brcm,kona-smc.yaml
> > delete mode 100644 Documentation/devicetree/bindings/misc/brcm,kona-smc.txt
> >
> > diff --git a/Documentation/devicetree/bindings/firmware/brcm,kona-smc.yaml b/Documentation/devicetree/bindings/firmware/brcm,kona-smc.yaml
> > new file mode 100644
> > index 000000000000..16c7928a0daa
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/firmware/brcm,kona-smc.yaml
> > @@ -0,0 +1,40 @@
> > +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/firmware/brcm,kona-smc.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Broadcom Kona family Secure Monitor bounce buffer
> > +
> > +description:
> > + A bounce buffer used for non-secure to secure communications.
> > +
> > +maintainers:
> > + - Florian Fainelli <[email protected]>
> > +
> > +properties:
> > + compatible:
> > + oneOf:
>
> You do not need oneOf.
Nice catch! Seems I forgot to remove it when removing the deprecated
compatibles. Will fix in V3.
Stanislav
>
>
> Best regards,
> Krzysztof
>