When the receive partial store and forward mode is activated, the
receiver will only begin to forward the packet to the external AHB
or AXI slave when enough packet data is stored in the packet buffer.
The amount of packet data required to activate the forwarding process
is programmable via watermark registers which are located at the same
address as the partial store and forward enable bits. Adding support to
read this rx-watermark value from device-tree, to program the watermark
registers and enable partial store and forwarding.
Signed-off-by: Maulik Jodhani <[email protected]>
Signed-off-by: Michal Simek <[email protected]>
Signed-off-by: Harini Katakam <[email protected]>
Signed-off-by: Radhey Shyam Pandey <[email protected]>
Signed-off-by: Pranavi Somisetty <[email protected]>
---
Changes v2:
1. Removed all the changes related to validating FCS when Rx checksum offload is disabled.
2. Instead of using a platform dependent number (0xFFF) for the reset value of rx watermark,
derive it from designcfg_debug2 register.
3. Added a check to see if partial s/f is supported, by reading the
designcfg_debug6 register.
---
drivers/net/ethernet/cadence/macb.h | 14 +++++++
drivers/net/ethernet/cadence/macb_main.c | 49 +++++++++++++++++++++++-
2 files changed, 61 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/cadence/macb.h b/drivers/net/ethernet/cadence/macb.h
index 14dfec4db8f9..46833662094d 100644
--- a/drivers/net/ethernet/cadence/macb.h
+++ b/drivers/net/ethernet/cadence/macb.h
@@ -82,6 +82,7 @@
#define GEM_NCFGR 0x0004 /* Network Config */
#define GEM_USRIO 0x000c /* User IO */
#define GEM_DMACFG 0x0010 /* DMA Configuration */
+#define GEM_PBUFRXCUT 0x0044 /* RX Partial Store and Forward */
#define GEM_JML 0x0048 /* Jumbo Max Length */
#define GEM_HS_MAC_CONFIG 0x0050 /* GEM high speed config */
#define GEM_HRB 0x0080 /* Hash Bottom */
@@ -343,6 +344,11 @@
#define GEM_ADDR64_SIZE 1
+/* Bitfields in PBUFRXCUT */
+#define GEM_WTRMRK_OFFSET 0 /* Watermark value offset */
+#define GEM_ENCUTTHRU_OFFSET 31 /* Enable RX partial store and forward */
+#define GEM_ENCUTTHRU_SIZE 1
+
/* Bitfields in NSR */
#define MACB_NSR_LINK_OFFSET 0 /* pcs_link_state */
#define MACB_NSR_LINK_SIZE 1
@@ -509,6 +515,8 @@
#define GEM_TX_PKT_BUFF_OFFSET 21
#define GEM_TX_PKT_BUFF_SIZE 1
+#define GEM_RX_PBUF_ADDR_OFFSET 22
+#define GEM_RX_PBUF_ADDR_SIZE 4
/* Bitfields in DCFG5. */
#define GEM_TSU_OFFSET 8
@@ -517,6 +525,8 @@
/* Bitfields in DCFG6. */
#define GEM_PBUF_LSO_OFFSET 27
#define GEM_PBUF_LSO_SIZE 1
+#define GEM_PBUF_CUTTHRU_OFFSET 26
+#define GEM_PBUF_CUTTHRU_SIZE 1
#define GEM_DAW64_OFFSET 23
#define GEM_DAW64_SIZE 1
@@ -718,6 +728,7 @@
#define MACB_CAPS_NEEDS_RSTONUBR 0x00000100
#define MACB_CAPS_MIIONRGMII 0x00000200
#define MACB_CAPS_NEED_TSUCLK 0x00000400
+#define MACB_CAPS_PARTIAL_STORE_FORWARD 0x00000800
#define MACB_CAPS_PCS 0x01000000
#define MACB_CAPS_HIGH_SPEED 0x02000000
#define MACB_CAPS_CLK_HW_CHG 0x04000000
@@ -1283,6 +1294,9 @@ struct macb {
u32 wol;
+ /* holds value of rx watermark value for pbuf_rxcutthru register */
+ u16 rx_watermark;
+
struct macb_ptp_info *ptp_info; /* macb-ptp interface */
struct phy *sgmii_phy; /* for ZynqMP SGMII mode */
diff --git a/drivers/net/ethernet/cadence/macb_main.c b/drivers/net/ethernet/cadence/macb_main.c
index 41964fd02452..07b9964e7aa3 100644
--- a/drivers/net/ethernet/cadence/macb_main.c
+++ b/drivers/net/ethernet/cadence/macb_main.c
@@ -2600,6 +2600,7 @@ static void macb_init_rings(struct macb *bp)
static void macb_reset_hw(struct macb *bp)
{
struct macb_queue *queue;
+ u16 watermark_reset_value;
unsigned int q;
u32 ctrl = macb_readl(bp, NCR);
@@ -2617,6 +2618,12 @@ static void macb_reset_hw(struct macb *bp)
macb_writel(bp, TSR, -1);
macb_writel(bp, RSR, -1);
+ /* Disable RX partial store and forward and reset watermark value */
+ if (bp->caps & MACB_CAPS_PARTIAL_STORE_FORWARD) {
+ watermark_reset_value = (1 << (GEM_BFEXT(RX_PBUF_ADDR, gem_readl(bp, DCFG2)))) - 1;
+ gem_writel(bp, PBUFRXCUT, watermark_reset_value);
+ }
+
/* Disable all interrupts */
for (q = 0, queue = bp->queues; q < bp->num_queues; ++q, ++queue) {
queue_writel(queue, IDR, -1);
@@ -2743,6 +2750,8 @@ static void macb_configure_dma(struct macb *bp)
static void macb_init_hw(struct macb *bp)
{
+ u16 watermark_reset_value;
+ u16 watermark_value;
u32 config;
macb_reset_hw(bp);
@@ -2770,6 +2779,14 @@ static void macb_init_hw(struct macb *bp)
bp->rx_frm_len_mask = MACB_RX_JFRMLEN_MASK;
macb_configure_dma(bp);
+
+ /* Enable RX partial store and forward and set watermark */
+ if ((bp->caps & MACB_CAPS_PARTIAL_STORE_FORWARD) && bp->rx_watermark) {
+ watermark_reset_value = (1 << (GEM_BFEXT(RX_PBUF_ADDR, gem_readl(bp, DCFG2)))) - 1;
+ watermark_value = bp->rx_watermark & watermark_reset_value;
+ gem_writel(bp, PBUFRXCUT,
+ (watermark_value | GEM_BIT(ENCUTTHRU)));
+ }
}
/* The hash address register is 64 bits long and takes up two
@@ -3861,11 +3878,37 @@ static const struct net_device_ops macb_netdev_ops = {
static void macb_configure_caps(struct macb *bp,
const struct macb_config *dt_conf)
{
+ u32 wtrmrk_rst_val;
+ int retval;
u32 dcfg;
if (dt_conf)
bp->caps = dt_conf->caps;
+ /* By default we set to partial store and forward mode for zynqmp.
+ * Disable if not set in devicetree.
+ */
+ if (GEM_BFEXT(PBUF_CUTTHRU, gem_readl(bp, DCFG6))) {
+ if (bp->caps & MACB_CAPS_PARTIAL_STORE_FORWARD) {
+ retval = of_property_read_u16(bp->pdev->dev.of_node,
+ "rx-watermark",
+ &bp->rx_watermark);
+
+ /* Disable partial store and forward in case of error or
+ * invalid watermark value
+ */
+ wtrmrk_rst_val = (1 << (GEM_BFEXT(RX_PBUF_ADDR, gem_readl(bp, DCFG2)))) - 1;
+ if (retval || bp->rx_watermark > wtrmrk_rst_val || !bp->rx_watermark) {
+ if (bp->rx_watermark > wtrmrk_rst_val) {
+ dev_info(&bp->pdev->dev, "Invalid watermark value\n");
+ bp->rx_watermark = 0;
+ }
+ dev_info(&bp->pdev->dev, "Not enabling partial store and forward\n");
+ bp->caps &= ~MACB_CAPS_PARTIAL_STORE_FORWARD;
+ }
+ }
+ }
+
if (hw_is_gem(bp->regs, bp->native_io)) {
bp->caps |= MACB_CAPS_MACB_IS_GEM;
@@ -4813,7 +4856,8 @@ static const struct macb_config np4_config = {
static const struct macb_config zynqmp_config = {
.caps = MACB_CAPS_GIGABIT_MODE_AVAILABLE |
MACB_CAPS_JUMBO |
- MACB_CAPS_GEM_HAS_PTP | MACB_CAPS_BD_RD_PREFETCH,
+ MACB_CAPS_GEM_HAS_PTP | MACB_CAPS_BD_RD_PREFETCH |
+ MACB_CAPS_PARTIAL_STORE_FORWARD,
.dma_burst_length = 16,
.clk_init = macb_clk_init,
.init = init_reset_optional,
@@ -4861,7 +4905,8 @@ static const struct macb_config sama7g5_emac_config = {
static const struct macb_config versal_config = {
.caps = MACB_CAPS_GIGABIT_MODE_AVAILABLE | MACB_CAPS_JUMBO |
- MACB_CAPS_GEM_HAS_PTP | MACB_CAPS_BD_RD_PREFETCH | MACB_CAPS_NEED_TSUCLK,
+ MACB_CAPS_GEM_HAS_PTP | MACB_CAPS_BD_RD_PREFETCH |
+ MACB_CAPS_NEED_TSUCLK | MACB_CAPS_PARTIAL_STORE_FORWARD,
.dma_burst_length = 16,
.clk_init = macb_clk_init,
.init = init_reset_optional,
--
2.36.1
On Thu, May 11, 2023 at 01:12:14AM -0600, Pranavi Somisetty wrote:
> When the receive partial store and forward mode is activated, the
> receiver will only begin to forward the packet to the external AHB
> or AXI slave when enough packet data is stored in the packet buffer.
> The amount of packet data required to activate the forwarding process
> is programmable via watermark registers which are located at the same
> address as the partial store and forward enable bits. Adding support to
> read this rx-watermark value from device-tree, to program the watermark
> registers and enable partial store and forwarding.
>
> Signed-off-by: Maulik Jodhani <[email protected]>
> Signed-off-by: Michal Simek <[email protected]>
> Signed-off-by: Harini Katakam <[email protected]>
> Signed-off-by: Radhey Shyam Pandey <[email protected]>
> Signed-off-by: Pranavi Somisetty <[email protected]>
In passing, this looks like an odd SoB chain. You are the patch's author
and the sender, what did everyone else here do?
If these people helped with the patch, should they have Co-developed-by:
lines too?
Cheers,
Conor.
On Thu, May 11, 2023 at 01:12:14AM -0600, Pranavi Somisetty wrote:
> When the receive partial store and forward mode is activated, the
> receiver will only begin to forward the packet to the external AHB
> or AXI slave when enough packet data is stored in the packet buffer.
> The amount of packet data required to activate the forwarding process
> is programmable via watermark registers which are located at the same
> address as the partial store and forward enable bits. Adding support to
> read this rx-watermark value from device-tree, to program the watermark
> registers and enable partial store and forwarding.
>
> Signed-off-by: Maulik Jodhani <[email protected]>
> Signed-off-by: Michal Simek <[email protected]>
> Signed-off-by: Harini Katakam <[email protected]>
> Signed-off-by: Radhey Shyam Pandey <[email protected]>
> Signed-off-by: Pranavi Somisetty <[email protected]>
> ---
> Changes v2:
>
> 1. Removed all the changes related to validating FCS when Rx checksum offload is disabled.
> 2. Instead of using a platform dependent number (0xFFF) for the reset value of rx watermark,
> derive it from designcfg_debug2 register.
> 3. Added a check to see if partial s/f is supported, by reading the
> designcfg_debug6 register.
> ---
> drivers/net/ethernet/cadence/macb.h | 14 +++++++
> drivers/net/ethernet/cadence/macb_main.c | 49 +++++++++++++++++++++++-
> 2 files changed, 61 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/net/ethernet/cadence/macb.h b/drivers/net/ethernet/cadence/macb.h
> index 14dfec4db8f9..46833662094d 100644
> --- a/drivers/net/ethernet/cadence/macb.h
> +++ b/drivers/net/ethernet/cadence/macb.h
> @@ -82,6 +82,7 @@
> #define GEM_NCFGR 0x0004 /* Network Config */
> #define GEM_USRIO 0x000c /* User IO */
> #define GEM_DMACFG 0x0010 /* DMA Configuration */
> +#define GEM_PBUFRXCUT 0x0044 /* RX Partial Store and Forward */
> #define GEM_JML 0x0048 /* Jumbo Max Length */
> #define GEM_HS_MAC_CONFIG 0x0050 /* GEM high speed config */
> #define GEM_HRB 0x0080 /* Hash Bottom */
> @@ -343,6 +344,11 @@
> #define GEM_ADDR64_SIZE 1
>
>
> +/* Bitfields in PBUFRXCUT */
> +#define GEM_WTRMRK_OFFSET 0 /* Watermark value offset */
> +#define GEM_ENCUTTHRU_OFFSET 31 /* Enable RX partial store and forward */
> +#define GEM_ENCUTTHRU_SIZE 1
> +
> /* Bitfields in NSR */
> #define MACB_NSR_LINK_OFFSET 0 /* pcs_link_state */
> #define MACB_NSR_LINK_SIZE 1
> @@ -509,6 +515,8 @@
> #define GEM_TX_PKT_BUFF_OFFSET 21
> #define GEM_TX_PKT_BUFF_SIZE 1
>
> +#define GEM_RX_PBUF_ADDR_OFFSET 22
> +#define GEM_RX_PBUF_ADDR_SIZE 4
>
> /* Bitfields in DCFG5. */
> #define GEM_TSU_OFFSET 8
> @@ -517,6 +525,8 @@
> /* Bitfields in DCFG6. */
> #define GEM_PBUF_LSO_OFFSET 27
> #define GEM_PBUF_LSO_SIZE 1
> +#define GEM_PBUF_CUTTHRU_OFFSET 26
> +#define GEM_PBUF_CUTTHRU_SIZE 1
> #define GEM_DAW64_OFFSET 23
> #define GEM_DAW64_SIZE 1
>
> @@ -718,6 +728,7 @@
> #define MACB_CAPS_NEEDS_RSTONUBR 0x00000100
> #define MACB_CAPS_MIIONRGMII 0x00000200
> #define MACB_CAPS_NEED_TSUCLK 0x00000400
> +#define MACB_CAPS_PARTIAL_STORE_FORWARD 0x00000800
> #define MACB_CAPS_PCS 0x01000000
> #define MACB_CAPS_HIGH_SPEED 0x02000000
> #define MACB_CAPS_CLK_HW_CHG 0x04000000
> @@ -1283,6 +1294,9 @@ struct macb {
>
> u32 wol;
>
> + /* holds value of rx watermark value for pbuf_rxcutthru register */
> + u16 rx_watermark;
> +
> struct macb_ptp_info *ptp_info; /* macb-ptp interface */
>
> struct phy *sgmii_phy; /* for ZynqMP SGMII mode */
> diff --git a/drivers/net/ethernet/cadence/macb_main.c b/drivers/net/ethernet/cadence/macb_main.c
> index 41964fd02452..07b9964e7aa3 100644
> --- a/drivers/net/ethernet/cadence/macb_main.c
> +++ b/drivers/net/ethernet/cadence/macb_main.c
> @@ -2600,6 +2600,7 @@ static void macb_init_rings(struct macb *bp)
> static void macb_reset_hw(struct macb *bp)
> {
> struct macb_queue *queue;
> + u16 watermark_reset_value;
> unsigned int q;
> u32 ctrl = macb_readl(bp, NCR);
Given the review of Conor Dooley of both patches in this series I think
there will be a v3.
Please consider adjusting the hunk above to move towards rather than
away from reverse xmas tree - longest line to shortest - for local
variable names.
That would be:
u16 watermark_reset_value;
struct macb_queue *queue;
...
pw-bot: cr
> + if (GEM_BFEXT(PBUF_CUTTHRU, gem_readl(bp, DCFG6))) {
> + if (bp->caps & MACB_CAPS_PARTIAL_STORE_FORWARD) {
> + retval = of_property_read_u16(bp->pdev->dev.of_node,
> + "rx-watermark",
> + &bp->rx_watermark);
> +
> + /* Disable partial store and forward in case of error or
> + * invalid watermark value
> + */
> + wtrmrk_rst_val = (1 << (GEM_BFEXT(RX_PBUF_ADDR, gem_readl(bp, DCFG2)))) - 1;
> + if (retval || bp->rx_watermark > wtrmrk_rst_val || !bp->rx_watermark) {
> + if (bp->rx_watermark > wtrmrk_rst_val) {
> + dev_info(&bp->pdev->dev, "Invalid watermark value\n");
> + bp->rx_watermark = 0;
Please return -EINVAL. We want the DT author to fix their error.
> + }
> + dev_info(&bp->pdev->dev, "Not enabling partial store and forward\n");
The DT property is optional? So when it is missing, retval will be
-EINVAL. Please don't spam the logs in this case.
Andrew
On 11.05.2023 10:12, Pranavi Somisetty wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
>
> When the receive partial store and forward mode is activated, the
> receiver will only begin to forward the packet to the external AHB
> or AXI slave when enough packet data is stored in the packet buffer.
> The amount of packet data required to activate the forwarding process
> is programmable via watermark registers which are located at the same
> address as the partial store and forward enable bits. Adding support to
> read this rx-watermark value from device-tree, to program the watermark
> registers and enable partial store and forwarding.
>
> Signed-off-by: Maulik Jodhani <[email protected]>
> Signed-off-by: Michal Simek <[email protected]>
> Signed-off-by: Harini Katakam <[email protected]>
> Signed-off-by: Radhey Shyam Pandey <[email protected]>
> Signed-off-by: Pranavi Somisetty <[email protected]>
> ---
> Changes v2:
>
> 1. Removed all the changes related to validating FCS when Rx checksum offload is disabled.
> 2. Instead of using a platform dependent number (0xFFF) for the reset value of rx watermark,
> derive it from designcfg_debug2 register.
> 3. Added a check to see if partial s/f is supported, by reading the
> designcfg_debug6 register.
> ---
> drivers/net/ethernet/cadence/macb.h | 14 +++++++
> drivers/net/ethernet/cadence/macb_main.c | 49 +++++++++++++++++++++++-
> 2 files changed, 61 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/net/ethernet/cadence/macb.h b/drivers/net/ethernet/cadence/macb.h
> index 14dfec4db8f9..46833662094d 100644
> --- a/drivers/net/ethernet/cadence/macb.h
> +++ b/drivers/net/ethernet/cadence/macb.h
> @@ -82,6 +82,7 @@
> #define GEM_NCFGR 0x0004 /* Network Config */
> #define GEM_USRIO 0x000c /* User IO */
> #define GEM_DMACFG 0x0010 /* DMA Configuration */
> +#define GEM_PBUFRXCUT 0x0044 /* RX Partial Store and Forward */
> #define GEM_JML 0x0048 /* Jumbo Max Length */
> #define GEM_HS_MAC_CONFIG 0x0050 /* GEM high speed config */
> #define GEM_HRB 0x0080 /* Hash Bottom */
> @@ -343,6 +344,11 @@
> #define GEM_ADDR64_SIZE 1
>
>
> +/* Bitfields in PBUFRXCUT */
> +#define GEM_WTRMRK_OFFSET 0 /* Watermark value offset */
> +#define GEM_ENCUTTHRU_OFFSET 31 /* Enable RX partial store and forward */
> +#define GEM_ENCUTTHRU_SIZE 1
> +
> /* Bitfields in NSR */
> #define MACB_NSR_LINK_OFFSET 0 /* pcs_link_state */
> #define MACB_NSR_LINK_SIZE 1
> @@ -509,6 +515,8 @@
> #define GEM_TX_PKT_BUFF_OFFSET 21
> #define GEM_TX_PKT_BUFF_SIZE 1
>
> +#define GEM_RX_PBUF_ADDR_OFFSET 22
> +#define GEM_RX_PBUF_ADDR_SIZE 4
>
> /* Bitfields in DCFG5. */
> #define GEM_TSU_OFFSET 8
> @@ -517,6 +525,8 @@
> /* Bitfields in DCFG6. */
> #define GEM_PBUF_LSO_OFFSET 27
> #define GEM_PBUF_LSO_SIZE 1
> +#define GEM_PBUF_CUTTHRU_OFFSET 26
> +#define GEM_PBUF_CUTTHRU_SIZE 1
> #define GEM_DAW64_OFFSET 23
> #define GEM_DAW64_SIZE 1
>
> @@ -718,6 +728,7 @@
> #define MACB_CAPS_NEEDS_RSTONUBR 0x00000100
> #define MACB_CAPS_MIIONRGMII 0x00000200
> #define MACB_CAPS_NEED_TSUCLK 0x00000400
> +#define MACB_CAPS_PARTIAL_STORE_FORWARD 0x00000800
> #define MACB_CAPS_PCS 0x01000000
> #define MACB_CAPS_HIGH_SPEED 0x02000000
> #define MACB_CAPS_CLK_HW_CHG 0x04000000
> @@ -1283,6 +1294,9 @@ struct macb {
>
> u32 wol;
>
> + /* holds value of rx watermark value for pbuf_rxcutthru register */
> + u16 rx_watermark;
> +
> struct macb_ptp_info *ptp_info; /* macb-ptp interface */
>
> struct phy *sgmii_phy; /* for ZynqMP SGMII mode */
> diff --git a/drivers/net/ethernet/cadence/macb_main.c b/drivers/net/ethernet/cadence/macb_main.c
> index 41964fd02452..07b9964e7aa3 100644
> --- a/drivers/net/ethernet/cadence/macb_main.c
> +++ b/drivers/net/ethernet/cadence/macb_main.c
> @@ -2600,6 +2600,7 @@ static void macb_init_rings(struct macb *bp)
> static void macb_reset_hw(struct macb *bp)
> {
> struct macb_queue *queue;
> + u16 watermark_reset_value;
> unsigned int q;
> u32 ctrl = macb_readl(bp, NCR);
>
> @@ -2617,6 +2618,12 @@ static void macb_reset_hw(struct macb *bp)
> macb_writel(bp, TSR, -1);
> macb_writel(bp, RSR, -1);
>
> + /* Disable RX partial store and forward and reset watermark value */
> + if (bp->caps & MACB_CAPS_PARTIAL_STORE_FORWARD) {
> + watermark_reset_value = (1 << (GEM_BFEXT(RX_PBUF_ADDR, gem_readl(bp, DCFG2)))) - 1;
Is this block needed? Maybe all you need here is just to disable the rx
partial store and forward?
> + gem_writel(bp, PBUFRXCUT, watermark_reset_value);
> + }
> +
> /* Disable all interrupts */
> for (q = 0, queue = bp->queues; q < bp->num_queues; ++q, ++queue) {
> queue_writel(queue, IDR, -1);
> @@ -2743,6 +2750,8 @@ static void macb_configure_dma(struct macb *bp)
>
> static void macb_init_hw(struct macb *bp)
> {
> + u16 watermark_reset_value;
> + u16 watermark_value;
> u32 config;
>
> macb_reset_hw(bp);
> @@ -2770,6 +2779,14 @@ static void macb_init_hw(struct macb *bp)
> bp->rx_frm_len_mask = MACB_RX_JFRMLEN_MASK;
>
> macb_configure_dma(bp);
> +
> + /* Enable RX partial store and forward and set watermark */
> + if ((bp->caps & MACB_CAPS_PARTIAL_STORE_FORWARD) && bp->rx_watermark) {
> + watermark_reset_value = (1 << (GEM_BFEXT(RX_PBUF_ADDR, gem_readl(bp, DCFG2)))) - 1;
> + watermark_value = bp->rx_watermark & watermark_reset_value;
You should validate the value in bp->rx_watermark in probe and here just
update the PBUFRXCUT with that value.
> + gem_writel(bp, PBUFRXCUT,
> + (watermark_value | GEM_BIT(ENCUTTHRU)));
> + }
> }
>
> /* The hash address register is 64 bits long and takes up two
> @@ -3861,11 +3878,37 @@ static const struct net_device_ops macb_netdev_ops = {
> static void macb_configure_caps(struct macb *bp,
> const struct macb_config *dt_conf)
> {
> + u32 wtrmrk_rst_val;
> + int retval;
> u32 dcfg;
>
> if (dt_conf)
> bp->caps = dt_conf->caps;
>
> + /* By default we set to partial store and forward mode for zynqmp.
> + * Disable if not set in devicetree.
> + */
> + if (GEM_BFEXT(PBUF_CUTTHRU, gem_readl(bp, DCFG6))) {
> + if (bp->caps & MACB_CAPS_PARTIAL_STORE_FORWARD) {
You can get rid of MACB_CAPS_PARTIAL_STORE_FORWARD and consider it enabled
or not based on device tree rx-watermark dt property. Thus you can have
here only:
if (GEM_BFEXT(PBUF_CUTTHRU, gem_readl(bp, DCFG6)))
and based on the validity of data passed to "rx-watermark" the
bp->rx_watermark will be zero or not. You can check bp->rx_watermark all
over the code to check if rx partial store and fw is enabled.
> + retval = of_property_read_u16(bp->pdev->dev.of_node,
> + "rx-watermark",
> + &bp->rx_watermark);
E.g. SAMA7G5 has PBUFRXCUT.watermark on 10 bits. Is it the same on Xynqmp?
For compatibility with future implementations and stable DT interface it
would be better to just keep rx-watermark DT property on 32 bits.
> +
> + /* Disable partial store and forward in case of error or
> + * invalid watermark value
> + */
> + wtrmrk_rst_val = (1 << (GEM_BFEXT(RX_PBUF_ADDR, gem_readl(bp, DCFG2)))) - 1;
> + if (retval || bp->rx_watermark > wtrmrk_rst_val || !bp->rx_watermark) {
> + if (bp->rx_watermark > wtrmrk_rst_val) {
> + dev_info(&bp->pdev->dev, "Invalid watermark value\n");
> + bp->rx_watermark = 0;
Checking this in the code should be enough. There is no need to introduce a
new capability.
> + }
> + dev_info(&bp->pdev->dev, "Not enabling partial store and forward\n");
> + bp->caps &= ~MACB_CAPS_PARTIAL_STORE_FORWARD;
> + }
> + }
> + }
> +
> if (hw_is_gem(bp->regs, bp->native_io)) {
> bp->caps |= MACB_CAPS_MACB_IS_GEM;
>
> @@ -4813,7 +4856,8 @@ static const struct macb_config np4_config = {
> static const struct macb_config zynqmp_config = {
> .caps = MACB_CAPS_GIGABIT_MODE_AVAILABLE |
> MACB_CAPS_JUMBO |
> - MACB_CAPS_GEM_HAS_PTP | MACB_CAPS_BD_RD_PREFETCH,
> + MACB_CAPS_GEM_HAS_PTP | MACB_CAPS_BD_RD_PREFETCH |
> + MACB_CAPS_PARTIAL_STORE_FORWARD,
> .dma_burst_length = 16,
> .clk_init = macb_clk_init,
> .init = init_reset_optional,
> @@ -4861,7 +4905,8 @@ static const struct macb_config sama7g5_emac_config = {
>
> static const struct macb_config versal_config = {
> .caps = MACB_CAPS_GIGABIT_MODE_AVAILABLE | MACB_CAPS_JUMBO |
> - MACB_CAPS_GEM_HAS_PTP | MACB_CAPS_BD_RD_PREFETCH | MACB_CAPS_NEED_TSUCLK,
> + MACB_CAPS_GEM_HAS_PTP | MACB_CAPS_BD_RD_PREFETCH |
> + MACB_CAPS_NEED_TSUCLK | MACB_CAPS_PARTIAL_STORE_FORWARD,
> .dma_burst_length = 16,
> .clk_init = macb_clk_init,
> .init = init_reset_optional,
> --
> 2.36.1
>
> -----Original Message-----
> From: [email protected] <[email protected]>
> Sent: Friday, May 12, 2023 1:28 PM
> To: Somisetty, Pranavi <[email protected]>;
> [email protected]; [email protected];
> [email protected]; [email protected]; [email protected];
> [email protected]; [email protected]; [email protected]
> Cc: git (AMD-Xilinx) <[email protected]>; Simek, Michal
> <[email protected]>; Katakam, Harini <[email protected]>;
> Pandey, Radhey Shyam <[email protected]>;
> [email protected]; [email protected]; linux-
> [email protected]
> Subject: Re: [PATCH net-next v2 2/2] net: macb: Add support for partial store
> and forward
>
> On 11.05.2023 10:12, Pranavi Somisetty wrote:
> > EXTERNAL EMAIL: Do not click links or open attachments unless you know
> > the content is safe
> >
> > When the receive partial store and forward mode is activated, the
> > receiver will only begin to forward the packet to the external AHB or
> > AXI slave when enough packet data is stored in the packet buffer.
> > The amount of packet data required to activate the forwarding process
> > is programmable via watermark registers which are located at the same
> > address as the partial store and forward enable bits. Adding support
> > to read this rx-watermark value from device-tree, to program the
> > watermark registers and enable partial store and forwarding.
> >
> > Signed-off-by: Maulik Jodhani <[email protected]>
> > Signed-off-by: Michal Simek <[email protected]>
> > Signed-off-by: Harini Katakam <[email protected]>
> > Signed-off-by: Radhey Shyam Pandey <[email protected]>
> > Signed-off-by: Pranavi Somisetty <[email protected]>
> > ---
<snip>
> > + /* Disable RX partial store and forward and reset watermark value */
> > + if (bp->caps & MACB_CAPS_PARTIAL_STORE_FORWARD) {
> > + watermark_reset_value = (1 << (GEM_BFEXT(RX_PBUF_ADDR,
> > + gem_readl(bp, DCFG2)))) - 1;
>
> Is this block needed? Maybe all you need here is just to disable the rx partial
> store and forward?
Yes, the value doesn’t need to be written, disabling rx partial store and forward
is enough, will take care.
<snip>
>
> > + retval = of_property_read_u16(bp->pdev->dev.of_node,
> > + "rx-watermark",
> > +
> > + &bp->rx_watermark);
>
> E.g. SAMA7G5 has PBUFRXCUT.watermark on 10 bits. Is it the same on
> Xynqmp?
On ZynqMP its 12 bits.
> For compatibility with future implementations and stable DT interface it
> would be better to just keep rx-watermark DT property on 32 bits.
>
I don’t think it can extend beyond u16, considering, the maximum pbuf depth
field in DCFG2, is only 4 bits (22:25).
I'll do a re-spin addressing your and other reviewer's comments.
Thanks
Pranavi