The rpmh driver will cache sleep and wake votes until the cluster
power-domain is about to enter idle, to avoid unnecessary writes. So
associate the apps_rsc with the cluster pd, so that it can be notified
about this event.
Without this, only AMC votes are being commited.
Signed-off-by: Bjorn Andersson <[email protected]>
---
arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
index 8fa9fbfe5d00..5c68f2182c2f 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
@@ -3982,6 +3982,7 @@ apps_rsc: rsc@18200000 {
qcom,tcs-config = <ACTIVE_TCS 2>, <SLEEP_TCS 3>,
<WAKE_TCS 3>, <CONTROL_TCS 1>;
label = "apps_rsc";
+ power-domains = <&CLUSTER_PD>;
apps_bcm_voter: bcm-voter {
compatible = "qcom,bcm-voter";
--
2.25.1
On 12.05.2023 17:04, Bjorn Andersson wrote:
> The rpmh driver will cache sleep and wake votes until the cluster
> power-domain is about to enter idle, to avoid unnecessary writes. So
> associate the apps_rsc with the cluster pd, so that it can be notified
> about this event.
>
> Without this, only AMC votes are being commited.
Ouch.
Should we make this required: in bindings and add it to all
platforms?
>
> Signed-off-by: Bjorn Andersson <[email protected]>
> ---
Reviewed-by: Konrad Dybcio <[email protected]>
Fixes: 152d1faf1e2f ("arm64: dts: qcom: add SC8280XP platform")
Konrad
> arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> index 8fa9fbfe5d00..5c68f2182c2f 100644
> --- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> @@ -3982,6 +3982,7 @@ apps_rsc: rsc@18200000 {
> qcom,tcs-config = <ACTIVE_TCS 2>, <SLEEP_TCS 3>,
> <WAKE_TCS 3>, <CONTROL_TCS 1>;
> label = "apps_rsc";
> + power-domains = <&CLUSTER_PD>;
>
> apps_bcm_voter: bcm-voter {
> compatible = "qcom,bcm-voter";
On Sat, May 13, 2023 at 11:09:07AM +0200, Konrad Dybcio wrote:
>
>
> On 12.05.2023 17:04, Bjorn Andersson wrote:
> > The rpmh driver will cache sleep and wake votes until the cluster
> > power-domain is about to enter idle, to avoid unnecessary writes. So
> > associate the apps_rsc with the cluster pd, so that it can be notified
> > about this event.
> >
> > Without this, only AMC votes are being commited.
> Ouch.
>
> Should we make this required: in bindings and add it to all
> platforms?
>
I though this was an optimization and in the absence of this callback
the driver would just write out wake and sleep sets as well. But per the
current implementation (and perhaps some underlying cause?) it is indeed
required, if you care about power consumption.
> >
> > Signed-off-by: Bjorn Andersson <[email protected]>
> > ---
> Reviewed-by: Konrad Dybcio <[email protected]>
> Fixes: 152d1faf1e2f ("arm64: dts: qcom: add SC8280XP platform")
>
The Fixes sounds reasonable.
Thanks,
Bjorn
> Konrad
> > arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 1 +
> > 1 file changed, 1 insertion(+)
> >
> > diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> > index 8fa9fbfe5d00..5c68f2182c2f 100644
> > --- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> > +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> > @@ -3982,6 +3982,7 @@ apps_rsc: rsc@18200000 {
> > qcom,tcs-config = <ACTIVE_TCS 2>, <SLEEP_TCS 3>,
> > <WAKE_TCS 3>, <CONTROL_TCS 1>;
> > label = "apps_rsc";
> > + power-domains = <&CLUSTER_PD>;
> >
> > apps_bcm_voter: bcm-voter {
> > compatible = "qcom,bcm-voter";
On Fri, 12 May 2023 08:04:25 -0700, Bjorn Andersson wrote:
> The rpmh driver will cache sleep and wake votes until the cluster
> power-domain is about to enter idle, to avoid unnecessary writes. So
> associate the apps_rsc with the cluster pd, so that it can be notified
> about this event.
>
> Without this, only AMC votes are being commited.
>
> [...]
Applied, thanks!
[1/1] arm64: dts: qcom: sc8280xp: Flush RSC sleep & wake votes
commit: ce7c014937c442be677963848c7db62eccd94eac
Best regards,
--
Bjorn Andersson <[email protected]>
On Fri, May 12, 2023 at 08:04:25AM -0700, Bjorn Andersson wrote:
> The rpmh driver will cache sleep and wake votes until the cluster
> power-domain is about to enter idle, to avoid unnecessary writes. So
> associate the apps_rsc with the cluster pd, so that it can be notified
> about this event.
>
> Without this, only AMC votes are being commited.
>
> Signed-off-by: Bjorn Andersson <[email protected]>
It still didn't fix the BCM vote issue I'm seeing on the CRD but that might be
due to RPMh resources not entering sleep mode to apply the sleep vote flushed
with the help of this patch.
Acked-by: Manivannan Sadhasivam <[email protected]>
- Mani
> ---
> arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> index 8fa9fbfe5d00..5c68f2182c2f 100644
> --- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> @@ -3982,6 +3982,7 @@ apps_rsc: rsc@18200000 {
> qcom,tcs-config = <ACTIVE_TCS 2>, <SLEEP_TCS 3>,
> <WAKE_TCS 3>, <CONTROL_TCS 1>;
> label = "apps_rsc";
> + power-domains = <&CLUSTER_PD>;
>
> apps_bcm_voter: bcm-voter {
> compatible = "qcom,bcm-voter";
> --
> 2.25.1
>
--
மணிவண்ணன் சதாசிவம்
On 15.05.2023 04:38, Bjorn Andersson wrote:
> On Sat, May 13, 2023 at 11:09:07AM +0200, Konrad Dybcio wrote:
>>
>>
>> On 12.05.2023 17:04, Bjorn Andersson wrote:
>>> The rpmh driver will cache sleep and wake votes until the cluster
>>> power-domain is about to enter idle, to avoid unnecessary writes. So
>>> associate the apps_rsc with the cluster pd, so that it can be notified
>>> about this event.
>>>
>>> Without this, only AMC votes are being commited.
>> Ouch.
>>
>> Should we make this required: in bindings and add it to all
>> platforms?
>>
>
> I though this was an optimization and in the absence of this callback
> the driver would just write out wake and sleep sets as well. But per the
> current implementation (and perhaps some underlying cause?) it is indeed
> required, if you care about power consumption.
Hm.. since it's not strictly required for operation, would something
like this be fitting?:
oneOf:
- required:
[...]
- power-domains
- required:
[...]
deprecated: true
(if it even works this way)
Konrad
>
>>>
>>> Signed-off-by: Bjorn Andersson <[email protected]>
>>> ---
>> Reviewed-by: Konrad Dybcio <[email protected]>
>> Fixes: 152d1faf1e2f ("arm64: dts: qcom: add SC8280XP platform")
>>
>
> The Fixes sounds reasonable.
>
> Thanks,
> Bjorn
>
>> Konrad
>>> arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 1 +
>>> 1 file changed, 1 insertion(+)
>>>
>>> diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
>>> index 8fa9fbfe5d00..5c68f2182c2f 100644
>>> --- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
>>> +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
>>> @@ -3982,6 +3982,7 @@ apps_rsc: rsc@18200000 {
>>> qcom,tcs-config = <ACTIVE_TCS 2>, <SLEEP_TCS 3>,
>>> <WAKE_TCS 3>, <CONTROL_TCS 1>;
>>> label = "apps_rsc";
>>> + power-domains = <&CLUSTER_PD>;
>>>
>>> apps_bcm_voter: bcm-voter {
>>> compatible = "qcom,bcm-voter";
On Fri, May 12, 2023 at 08:04:25AM -0700, Bjorn Andersson wrote:
> The rpmh driver will cache sleep and wake votes until the cluster
> power-domain is about to enter idle, to avoid unnecessary writes. So
> associate the apps_rsc with the cluster pd, so that it can be notified
> about this event.
>
> Without this, only AMC votes are being commited.
I'm sure I'm missing some details here, but from reading (and tracing)
the code it looks like the cached votes are still being flushed albeit
via rpmh_rsc_cpu_pm_callback() as the individual CPUs go down.
There wasn't really any obvious motivation in the series adding support
for the cluster domain as to why the new mechanism is preferred (e.g. if
this is an actual fix or just an optimisation done to align with
downstream):
https://lore.kernel.org/all/[email protected]/
Either way, this appears to work as intended even if it does not in
itself have any significant effect on the X13s power consumption (in
idle or suspend).
> Signed-off-by: Bjorn Andersson <[email protected]>
Reviewed-by: Johan Hovold <[email protected]>
Tested-by: Johan Hovold <[email protected]>
Johan
On Sun, May 14, 2023 at 07:38:28PM -0700, Bjorn Andersson wrote:
> On Sat, May 13, 2023 at 11:09:07AM +0200, Konrad Dybcio wrote:
> >
> >
> > On 12.05.2023 17:04, Bjorn Andersson wrote:
> > > The rpmh driver will cache sleep and wake votes until the cluster
> > > power-domain is about to enter idle, to avoid unnecessary writes. So
> > > associate the apps_rsc with the cluster pd, so that it can be notified
> > > about this event.
> > >
> > > Without this, only AMC votes are being commited.
> > Ouch.
> >
> > Should we make this required: in bindings and add it to all
> > platforms?
> >
>
> I though this was an optimization and in the absence of this callback
> the driver would just write out wake and sleep sets as well. But per the
> current implementation (and perhaps some underlying cause?) it is indeed
> required, if you care about power consumption.
>
> > >
> > > Signed-off-by: Bjorn Andersson <[email protected]>
> > > ---
> > Reviewed-by: Konrad Dybcio <[email protected]>
> > Fixes: 152d1faf1e2f ("arm64: dts: qcom: add SC8280XP platform")
> >
>
> The Fixes sounds reasonable.
Note that support for the cluster domain was not added until 6.2 and
commit 25092e6100ac ("soc: qcom: rpmh-rsc: Attach RSC to cluster PM
domain") while support for sc8280xp went into 5.19 IIRC.
Johan
On Mon, May 15, 2023 at 11:34:45AM +0200, Konrad Dybcio wrote:
>
>
> On 15.05.2023 04:38, Bjorn Andersson wrote:
> > On Sat, May 13, 2023 at 11:09:07AM +0200, Konrad Dybcio wrote:
> >>
> >>
> >> On 12.05.2023 17:04, Bjorn Andersson wrote:
> >>> The rpmh driver will cache sleep and wake votes until the cluster
> >>> power-domain is about to enter idle, to avoid unnecessary writes. So
> >>> associate the apps_rsc with the cluster pd, so that it can be notified
> >>> about this event.
> >>>
> >>> Without this, only AMC votes are being commited.
> >> Ouch.
> >>
> >> Should we make this required: in bindings and add it to all
> >> platforms?
> >>
> >
> > I though this was an optimization and in the absence of this callback
> > the driver would just write out wake and sleep sets as well. But per the
> > current implementation (and perhaps some underlying cause?) it is indeed
> > required, if you care about power consumption.
> Hm.. since it's not strictly required for operation, would something
> like this be fitting?:
>
I don't think it's required for operation, but the current
implementation does require it.
So I think we should either require it in the binding to mimic the
implementation, or the implementation should handle either case (only
with a performance impact)
> oneOf:
> - required:
> [...]
> - power-domains
>
> - required:
> [...]
> deprecated: true
>
> (if it even works this way)
I don't think it's worth supporting the combinations.
Regards,
Bjorn
>
> Konrad
> >
> >>>
> >>> Signed-off-by: Bjorn Andersson <[email protected]>
> >>> ---
> >> Reviewed-by: Konrad Dybcio <[email protected]>
> >> Fixes: 152d1faf1e2f ("arm64: dts: qcom: add SC8280XP platform")
> >>
> >
> > The Fixes sounds reasonable.
> >
> > Thanks,
> > Bjorn
> >
> >> Konrad
> >>> arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 1 +
> >>> 1 file changed, 1 insertion(+)
> >>>
> >>> diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> >>> index 8fa9fbfe5d00..5c68f2182c2f 100644
> >>> --- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> >>> +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> >>> @@ -3982,6 +3982,7 @@ apps_rsc: rsc@18200000 {
> >>> qcom,tcs-config = <ACTIVE_TCS 2>, <SLEEP_TCS 3>,
> >>> <WAKE_TCS 3>, <CONTROL_TCS 1>;
> >>> label = "apps_rsc";
> >>> + power-domains = <&CLUSTER_PD>;
> >>>
> >>> apps_bcm_voter: bcm-voter {
> >>> compatible = "qcom,bcm-voter";
On 16.05.2023 23:01, Bjorn Andersson wrote:
> On Mon, May 15, 2023 at 11:34:45AM +0200, Konrad Dybcio wrote:
>>
>>
>> On 15.05.2023 04:38, Bjorn Andersson wrote:
>>> On Sat, May 13, 2023 at 11:09:07AM +0200, Konrad Dybcio wrote:
>>>>
>>>>
>>>> On 12.05.2023 17:04, Bjorn Andersson wrote:
>>>>> The rpmh driver will cache sleep and wake votes until the cluster
>>>>> power-domain is about to enter idle, to avoid unnecessary writes. So
>>>>> associate the apps_rsc with the cluster pd, so that it can be notified
>>>>> about this event.
>>>>>
>>>>> Without this, only AMC votes are being commited.
>>>> Ouch.
>>>>
>>>> Should we make this required: in bindings and add it to all
>>>> platforms?
>>>>
>>>
>>> I though this was an optimization and in the absence of this callback
>>> the driver would just write out wake and sleep sets as well. But per the
>>> current implementation (and perhaps some underlying cause?) it is indeed
>>> required, if you care about power consumption.
>> Hm.. since it's not strictly required for operation, would something
>> like this be fitting?:
>>
>
> I don't think it's required for operation, but the current
> implementation does require it.
>
> So I think we should either require it in the binding to mimic the
> implementation, or the implementation should handle either case (only
> with a performance impact)
Let's just require it then.
Konrad
>
>> oneOf:
>> - required:
>> [...]
>> - power-domains
>>
>> - required:
>> [...]
>> deprecated: true
>>
>> (if it even works this way)
>
> I don't think it's worth supporting the combinations.
>
> Regards,
> Bjorn
>
>>
>> Konrad
>>>
>>>>>
>>>>> Signed-off-by: Bjorn Andersson <[email protected]>
>>>>> ---
>>>> Reviewed-by: Konrad Dybcio <[email protected]>
>>>> Fixes: 152d1faf1e2f ("arm64: dts: qcom: add SC8280XP platform")
>>>>
>>>
>>> The Fixes sounds reasonable.
>>>
>>> Thanks,
>>> Bjorn
>>>
>>>> Konrad
>>>>> arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 1 +
>>>>> 1 file changed, 1 insertion(+)
>>>>>
>>>>> diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
>>>>> index 8fa9fbfe5d00..5c68f2182c2f 100644
>>>>> --- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
>>>>> +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
>>>>> @@ -3982,6 +3982,7 @@ apps_rsc: rsc@18200000 {
>>>>> qcom,tcs-config = <ACTIVE_TCS 2>, <SLEEP_TCS 3>,
>>>>> <WAKE_TCS 3>, <CONTROL_TCS 1>;
>>>>> label = "apps_rsc";
>>>>> + power-domains = <&CLUSTER_PD>;
>>>>>
>>>>> apps_bcm_voter: bcm-voter {
>>>>> compatible = "qcom,bcm-voter";