From: Pierre-Louis Bossart <[email protected]>
The registers used for multi-link synchronization are no longer in the
SHIM but in the HDaudio multi-link capability space. Use helpers to
configure the SYNCPRD value, and wait for SYNCPU to change after
powering-up.
Note that the SYNCPRD value is shared between all sublinks, for
obvious reasons if those links are supposed to be synchronized. The
value of SYNCPRD is programmed only once for all sublinks.
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Reviewed-by: Rander Wang <[email protected]>
Reviewed-by: Péter Ujfalusi <[email protected]>
Reviewed-by: Ranjani Sridharan <[email protected]>
Signed-off-by: Bard Liao <[email protected]>
---
drivers/soundwire/intel_ace2x.c | 42 +++++++++++++++++++++++++++++++--
1 file changed, 40 insertions(+), 2 deletions(-)
diff --git a/drivers/soundwire/intel_ace2x.c b/drivers/soundwire/intel_ace2x.c
index 5b6a608e63ba..01668246b7ba 100644
--- a/drivers/soundwire/intel_ace2x.c
+++ b/drivers/soundwire/intel_ace2x.c
@@ -17,17 +17,51 @@
static int intel_link_power_up(struct sdw_intel *sdw)
{
+ struct sdw_bus *bus = &sdw->cdns.bus;
+ struct sdw_master_prop *prop = &bus->prop;
+ u32 *shim_mask = sdw->link_res->shim_mask;
+ unsigned int link_id = sdw->instance;
+ u32 syncprd;
int ret;
mutex_lock(sdw->link_res->shim_lock);
- ret = hdac_bus_eml_sdw_power_up_unlocked(sdw->link_res->hbus, sdw->instance);
+ if (!*shim_mask) {
+ /* we first need to program the SyncPRD/CPU registers */
+ dev_dbg(sdw->cdns.dev, "first link up, programming SYNCPRD\n");
+
+ if (prop->mclk_freq % 6000000)
+ syncprd = SDW_SHIM_SYNC_SYNCPRD_VAL_38_4;
+ else
+ syncprd = SDW_SHIM_SYNC_SYNCPRD_VAL_24;
+
+ ret = hdac_bus_eml_sdw_set_syncprd_unlocked(sdw->link_res->hbus, syncprd);
+ if (ret < 0) {
+ dev_err(sdw->cdns.dev, "%s: hdac_bus_eml_sdw_set_syncprd failed: %d\n",
+ __func__, ret);
+ goto out;
+ }
+ }
+
+ ret = hdac_bus_eml_sdw_power_up_unlocked(sdw->link_res->hbus, link_id);
if (ret < 0) {
dev_err(sdw->cdns.dev, "%s: hdac_bus_eml_sdw_power_up failed: %d\n",
__func__, ret);
goto out;
}
+ if (!*shim_mask) {
+ /* SYNCPU will change once link is active */
+ ret = hdac_bus_eml_sdw_wait_syncpu_unlocked(sdw->link_res->hbus);
+ if (ret < 0) {
+ dev_err(sdw->cdns.dev, "%s: hdac_bus_eml_sdw_wait_syncpu failed: %d\n",
+ __func__, ret);
+ goto out;
+ }
+ }
+
+ *shim_mask |= BIT(link_id);
+
sdw->cdns.link_up = true;
out:
mutex_unlock(sdw->link_res->shim_lock);
@@ -37,13 +71,17 @@ static int intel_link_power_up(struct sdw_intel *sdw)
static int intel_link_power_down(struct sdw_intel *sdw)
{
+ u32 *shim_mask = sdw->link_res->shim_mask;
+ unsigned int link_id = sdw->instance;
int ret;
mutex_lock(sdw->link_res->shim_lock);
sdw->cdns.link_up = false;
- ret = hdac_bus_eml_sdw_power_down_unlocked(sdw->link_res->hbus, sdw->instance);
+ *shim_mask &= ~BIT(link_id);
+
+ ret = hdac_bus_eml_sdw_power_down_unlocked(sdw->link_res->hbus, link_id);
if (ret < 0) {
dev_err(sdw->cdns.dev, "%s: hdac_bus_eml_sdw_power_down failed: %d\n",
__func__, ret);
--
2.25.1