LinuxLists.cc - [PATCH v4 0/2] Reduce lcm_reset to DSI LP11 send cmd time

2023-05-15 09:58:01

Subject: [PATCH v4 0/2] Reduce lcm_reset to DSI LP11 send cmd time

The panel spec stipulates that after lcm_reset is pulled high, cmd
should be sent to initialize the panel. Within the allowable range of
the DSI spec, this time needs to be reduced to avoid panel exceptions.

Base on the branch of linus/master v6.3.

Change since v3:
1. Rebase.

Change since v2:
1. Remove the applied patch.
2. Change the commit title and the description.

Change since v1:
1. Added fine-tuning panel power sequence modification.

Shuijing Li (2):
drm/panel: boe-tv101wum-nl6: Remove extra delay
drm/panel: boe-tv101wum-nl6: Fine tune the panel power sequence

drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)

--
2.40.1

2023-05-15 10:00:45

by Shuijing Li (李水静)

[permalink] [raw]

Subject: [PATCH v4 2/2] drm/panel: boe-tv101wum-nl6: Fine tune the panel power sequence

For "boe,tv105wum-nw0" this special panel, it is stipulated in
the panel spec that MIPI needs to keep the LP11 state before
the lcm_reset pin is pulled high.

Signed-off-by: Shuijing Li <[email protected]>
Signed-off-by: Xinlei Lee <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
---
drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c | 6 ++++++
1 file changed, 6 insertions(+)

diff --git a/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c b/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c
index a5652d38acda..64e462f49c60 100644
--- a/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c
+++ b/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c
@@ -36,6 +36,7 @@ struct panel_desc {
const struct panel_init_cmd *init_cmds;
unsigned int lanes;
bool discharge_on_disable;
+ bool lp11_before_reset;
};

struct boe_panel {
@@ -1365,6 +1366,10 @@ static int boe_panel_prepare(struct drm_panel *panel)

usleep_range(10000, 11000);

+ if (boe->desc->lp11_before_reset) {
+ mipi_dsi_dcs_nop(boe->dsi);
+ usleep_range(1000, 2000);
+ }
gpiod_set_value(boe->enable_gpio, 1);
usleep_range(1000, 2000);
gpiod_set_value(boe->enable_gpio, 0);
@@ -1591,6 +1596,7 @@ static const struct panel_desc boe_tv105wum_nw0_desc = {
.mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_SYNC_PULSE |
MIPI_DSI_MODE_LPM,
.init_cmds = boe_init_cmd,
+ .lp11_before_reset = true,
};

static const struct drm_display_mode starry_qfh032011_53g_default_mode = {
--
2.40.1

2023-05-15 13:09:05

by Neil Armstrong

[permalink] [raw]

Subject: Re: [PATCH v4 0/2] Reduce lcm_reset to DSI LP11 send cmd time

Hi,

On Mon, 15 May 2023 17:49:53 +0800, Shuijing Li wrote:
> The panel spec stipulates that after lcm_reset is pulled high, cmd
> should be sent to initialize the panel. Within the allowable range of
> the DSI spec, this time needs to be reduced to avoid panel exceptions.
>
> Base on the branch of linus/master v6.3.
>
> Change since v3:
> 1. Rebase.
>
> [...]

Thanks, Applied to https://anongit.freedesktop.org/git/drm/drm-misc.git (drm-misc-next)

[1/2] drm/panel: boe-tv101wum-nl6: Remove extra delay
https://cgit.freedesktop.org/drm/drm-misc/commit/?id=fe7f4e8d496552f880d7368b482d2ccac33780b7
[2/2] drm/panel: boe-tv101wum-nl6: Fine tune the panel power sequence
https://cgit.freedesktop.org/drm/drm-misc/commit/?id=812562b8d881ce6d33fed8052b3a10b718430fb5

--
Neil

2023-05-16 08:31:32

by Neil Armstrong

[permalink] [raw]