Add DT node for ADC support in RK3588.
Signed-off-by: Shreeya Patel <[email protected]>
---
arch/arm64/boot/dts/rockchip/rk3588s.dtsi | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3588s.dtsi b/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
index 657c019d27fa..6c4424bc4b1b 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
@@ -1825,6 +1825,18 @@ dmac2: dma-controller@fed10000 {
#dma-cells = <1>;
};
+ saradc: saradc@fec10000 {
+ compatible = "rockchip,rk3588-saradc";
+ reg = <0x0 0xfec10000 0x0 0x10000>;
+ interrupts = <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH 0>;
+ #io-channel-cells = <1>;
+ clocks = <&cru CLK_SARADC>, <&cru PCLK_SARADC>;
+ clock-names = "saradc", "apb_pclk";
+ resets = <&cru SRST_P_SARADC>;
+ reset-names = "saradc-apb";
+ status = "disabled";
+ };
+
system_sram2: sram@ff001000 {
compatible = "mmio-sram";
reg = <0x0 0xff001000 0x0 0xef000>;
--
2.30.2
Il 17/05/23 01:00, Shreeya Patel ha scritto:
> Add DT node for ADC support in RK3588.
>
> Signed-off-by: Shreeya Patel <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>