Simplifies the clock names in imx_cdns3_core_clks[]. Such as, renaming
"usb3_lpm_clk" to "lpm". The "usb3" prefix and "clk" suffix were
redundant.
Signed-off-by: Frank Li <[email protected]>
---
This patch was missed at
https://lore.kernel.org/imx/[email protected]/
drivers/usb/cdns3/cdns3-imx.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/usb/cdns3/cdns3-imx.c b/drivers/usb/cdns3/cdns3-imx.c
index 59860d1753fd..5d9ca3c3c71d 100644
--- a/drivers/usb/cdns3/cdns3-imx.c
+++ b/drivers/usb/cdns3/cdns3-imx.c
@@ -105,11 +105,11 @@ static inline void cdns_imx_writel(struct cdns_imx *data, u32 offset, u32 value)
}
static const struct clk_bulk_data imx_cdns3_core_clks[] = {
- { .id = "usb3_lpm_clk" },
- { .id = "usb3_bus_clk" },
- { .id = "usb3_aclk" },
- { .id = "usb3_ipg_clk" },
- { .id = "usb3_core_pclk" },
+ { .id = "lpm" },
+ { .id = "bus" },
+ { .id = "aclk" },
+ { .id = "ipg" },
+ { .id = "core" },
};
static int cdns_imx_noncore_init(struct cdns_imx *data)
--
2.34.1
NXP imx8qm integrates 1 cdns3 IP. This is glue layer device bindings.
Signed-off-by: Frank Li <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
---
Preview discussion:
https://lore.kernel.org/imx/[email protected]/
.../bindings/usb/fsl,imx8qm-cdns3.yaml | 103 ++++++++++++++++++
1 file changed, 103 insertions(+)
create mode 100644 Documentation/devicetree/bindings/usb/fsl,imx8qm-cdns3.yaml
diff --git a/Documentation/devicetree/bindings/usb/fsl,imx8qm-cdns3.yaml b/Documentation/devicetree/bindings/usb/fsl,imx8qm-cdns3.yaml
new file mode 100644
index 000000000000..ceb76394af60
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/fsl,imx8qm-cdns3.yaml
@@ -0,0 +1,103 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (c) 2020 NXP
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/fsl,imx8qm-cdns3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP iMX8QM Soc USB Controller
+
+maintainers:
+ - Frank Li <[email protected]>
+
+properties:
+ compatible:
+ const: fsl,imx8qm-usb3
+
+ reg:
+ items:
+ - description: Register set for iMX USB3 Platform Control
+
+ "#address-cells":
+ enum: [ 1, 2 ]
+
+ "#size-cells":
+ enum: [ 1, 2 ]
+
+ ranges: true
+
+ clocks:
+ items:
+ - description: Standby clock. Used during ultra low power states.
+ - description: USB bus clock for usb3 controller.
+ - description: AXI clock for AXI interface.
+ - description: ipg clock for register access.
+ - description: Core clock for usb3 controller.
+
+ clock-names:
+ items:
+ - const: lpm
+ - const: bus
+ - const: aclk
+ - const: ipg
+ - const: core
+
+ power-domains:
+ maxItems: 1
+
+# Required child node:
+
+patternProperties:
+ "^usb@[0-9a-f]+$":
+ $ref: cdns,usb3.yaml#
+
+required:
+ - compatible
+ - reg
+ - "#address-cells"
+ - "#size-cells"
+ - ranges
+ - clocks
+ - clock-names
+ - power-domains
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/imx8-lpcg.h>
+ #include <dt-bindings/firmware/imx/rsrc.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ usb@5b110000 {
+ compatible = "fsl,imx8qm-usb3";
+ reg = <0x5b110000 0x10000>;
+ ranges;
+ clocks = <&usb3_lpcg IMX_LPCG_CLK_1>,
+ <&usb3_lpcg IMX_LPCG_CLK_0>,
+ <&usb3_lpcg IMX_LPCG_CLK_7>,
+ <&usb3_lpcg IMX_LPCG_CLK_4>,
+ <&usb3_lpcg IMX_LPCG_CLK_5>;
+ clock-names = "lpm", "bus", "aclk", "ipg", "core";
+ assigned-clocks = <&clk IMX_SC_R_USB_2 IMX_SC_PM_CLK_MST_BUS>;
+ assigned-clock-rates = <250000000>;
+ power-domains = <&pd IMX_SC_R_USB_2>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ usb@5b120000 {
+ compatible = "cdns,usb3";
+ reg = <0x5b120000 0x10000>, /* memory area for OTG/DRD registers */
+ <0x5b130000 0x10000>, /* memory area for HOST registers */
+ <0x5b140000 0x10000>; /* memory area for DEVICE registers */
+ reg-names = "otg", "xhci", "dev";
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "host", "peripheral", "otg", "wakeup";
+ phys = <&usb3_phy>;
+ phy-names = "cdns3,usb3-phy";
+ };
+ };
--
2.34.1
On 23-05-17 11:25:44, Frank Li wrote:
> Simplifies the clock names in imx_cdns3_core_clks[]. Such as, renaming
> "usb3_lpm_clk" to "lpm". The "usb3" prefix and "clk" suffix were
> redundant.
>
> Signed-off-by: Frank Li <[email protected]>
Acked-by: Peter Chen <[email protected]>
> ---
>
> This patch was missed at
> https://lore.kernel.org/imx/[email protected]/
>
> drivers/usb/cdns3/cdns3-imx.c | 10 +++++-----
> 1 file changed, 5 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/usb/cdns3/cdns3-imx.c b/drivers/usb/cdns3/cdns3-imx.c
> index 59860d1753fd..5d9ca3c3c71d 100644
> --- a/drivers/usb/cdns3/cdns3-imx.c
> +++ b/drivers/usb/cdns3/cdns3-imx.c
> @@ -105,11 +105,11 @@ static inline void cdns_imx_writel(struct cdns_imx *data, u32 offset, u32 value)
> }
>
> static const struct clk_bulk_data imx_cdns3_core_clks[] = {
> - { .id = "usb3_lpm_clk" },
> - { .id = "usb3_bus_clk" },
> - { .id = "usb3_aclk" },
> - { .id = "usb3_ipg_clk" },
> - { .id = "usb3_core_pclk" },
> + { .id = "lpm" },
> + { .id = "bus" },
> + { .id = "aclk" },
> + { .id = "ipg" },
> + { .id = "core" },
> };
>
> static int cdns_imx_noncore_init(struct cdns_imx *data)
> --
> 2.34.1
>
--
Thanks,
Peter Chen