Subject: [PATCH] hwmon: (oxp-sensors) Stop passing device structure

We don't need to pass device structure to write_to_ec() so we remove
that from the function declaration.
The same is valid for pwm_enable() and pwm_disable() as we were passing
the pointer to hand it off to write_to_ec().

Signed-off-by: Joaquín Ignacio Aramendía <[email protected]>
---
drivers/hwmon/oxp-sensors.c | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/hwmon/oxp-sensors.c b/drivers/hwmon/oxp-sensors.c
index a4ee757f879f..0ec7588610ad 100644
--- a/drivers/hwmon/oxp-sensors.c
+++ b/drivers/hwmon/oxp-sensors.c
@@ -141,7 +141,7 @@ static int read_from_ec(u8 reg, int size, long *val)
return 0;
}

-static int write_to_ec(const struct device *dev, u8 reg, u8 value)
+static int write_to_ec(u8 reg, u8 value)
{
int ret;

@@ -156,14 +156,14 @@ static int write_to_ec(const struct device *dev, u8 reg, u8 value)
return ret;
}

-static int oxp_pwm_enable(const struct device *dev)
+static int oxp_pwm_enable(void)
{
- return write_to_ec(dev, OXP_SENSOR_PWM_ENABLE_REG, 0x01);
+ return write_to_ec(OXP_SENSOR_PWM_ENABLE_REG, 0x01);
}

-static int oxp_pwm_disable(const struct device *dev)
+static int oxp_pwm_disable(void)
{
- return write_to_ec(dev, OXP_SENSOR_PWM_ENABLE_REG, 0x00);
+ return write_to_ec(OXP_SENSOR_PWM_ENABLE_REG, 0x00);
}

/* Callbacks for hwmon interface */
@@ -234,9 +234,9 @@ static int oxp_platform_write(struct device *dev, enum hwmon_sensor_types type,
switch (attr) {
case hwmon_pwm_enable:
if (val == 1)
- return oxp_pwm_enable(dev);
+ return oxp_pwm_enable();
else if (val == 0)
- return oxp_pwm_disable(dev);
+ return oxp_pwm_disable();
return -EINVAL;
case hwmon_pwm_input:
if (val < 0 || val > 255)
@@ -254,7 +254,7 @@ static int oxp_platform_write(struct device *dev, enum hwmon_sensor_types type,
default:
break;
}
- return write_to_ec(dev, OXP_SENSOR_PWM_REG, val);
+ return write_to_ec(OXP_SENSOR_PWM_REG, val);
default:
break;
}
--
2.40.1



2023-05-25 15:04:05

by Guenter Roeck

[permalink] [raw]
Subject: Re: [PATCH] hwmon: (oxp-sensors) Stop passing device structure

On Thu, May 25, 2023 at 11:26:52AM -0300, Joaqu?n Ignacio Aramend?a wrote:
> We don't need to pass device structure to write_to_ec() so we remove
> that from the function declaration.
> The same is valid for pwm_enable() and pwm_disable() as we were passing
> the pointer to hand it off to write_to_ec().
>
> Signed-off-by: Joaqu?n Ignacio Aramend?a <[email protected]>

Applied.

Thanks,
Guenter

> ---
> drivers/hwmon/oxp-sensors.c | 16 ++++++++--------
> 1 file changed, 8 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/hwmon/oxp-sensors.c b/drivers/hwmon/oxp-sensors.c
> index a4ee757f879f..0ec7588610ad 100644
> --- a/drivers/hwmon/oxp-sensors.c
> +++ b/drivers/hwmon/oxp-sensors.c
> @@ -141,7 +141,7 @@ static int read_from_ec(u8 reg, int size, long *val)
> return 0;
> }
>
> -static int write_to_ec(const struct device *dev, u8 reg, u8 value)
> +static int write_to_ec(u8 reg, u8 value)
> {
> int ret;
>
> @@ -156,14 +156,14 @@ static int write_to_ec(const struct device *dev, u8 reg, u8 value)
> return ret;
> }
>
> -static int oxp_pwm_enable(const struct device *dev)
> +static int oxp_pwm_enable(void)
> {
> - return write_to_ec(dev, OXP_SENSOR_PWM_ENABLE_REG, 0x01);
> + return write_to_ec(OXP_SENSOR_PWM_ENABLE_REG, 0x01);
> }
>
> -static int oxp_pwm_disable(const struct device *dev)
> +static int oxp_pwm_disable(void)
> {
> - return write_to_ec(dev, OXP_SENSOR_PWM_ENABLE_REG, 0x00);
> + return write_to_ec(OXP_SENSOR_PWM_ENABLE_REG, 0x00);
> }
>
> /* Callbacks for hwmon interface */
> @@ -234,9 +234,9 @@ static int oxp_platform_write(struct device *dev, enum hwmon_sensor_types type,
> switch (attr) {
> case hwmon_pwm_enable:
> if (val == 1)
> - return oxp_pwm_enable(dev);
> + return oxp_pwm_enable();
> else if (val == 0)
> - return oxp_pwm_disable(dev);
> + return oxp_pwm_disable();
> return -EINVAL;
> case hwmon_pwm_input:
> if (val < 0 || val > 255)
> @@ -254,7 +254,7 @@ static int oxp_platform_write(struct device *dev, enum hwmon_sensor_types type,
> default:
> break;
> }
> - return write_to_ec(dev, OXP_SENSOR_PWM_REG, val);
> + return write_to_ec(OXP_SENSOR_PWM_REG, val);
> default:
> break;
> }