USB over-current detection is supported on this board. So, activate it
and fixes the following kernel warnings:
imx_usb 2184200.usb: No over current polarity defined
Signed-off-by: Oleksij Rempel <[email protected]>
---
arch/arm/boot/dts/imx6ul-prti6g.dts | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/boot/dts/imx6ul-prti6g.dts b/arch/arm/boot/dts/imx6ul-prti6g.dts
index b7c96fbe7a91..c3c50f51a5a8 100644
--- a/arch/arm/boot/dts/imx6ul-prti6g.dts
+++ b/arch/arm/boot/dts/imx6ul-prti6g.dts
@@ -177,6 +177,7 @@ &uart1 {
&usbotg1 {
dr_mode = "host";
+ over-current-active-low;
status = "okay";
};
--
2.39.2