2023-06-01 21:37:36

by Elson Serrao

[permalink] [raw]
Subject: [PATCH v2] usb: dwc3: gadget: Reset num TRBs before giving back the request

Consider a scenario where cable disconnect happens when there is an active
usb reqest queued to the UDC. As part of the disconnect we would issue an
end transfer with no interrupt-on-completion before giving back this
request. Since we are giving back the request without skipping TRBs the
num_trbs field of dwc3_request still holds the stale value previously used.
Function drivers re-use same request for a given bind-unbind session and
hence their dwc3_request context gets preserved across cable
disconnect/connect. When such a request gets re-queued after cable connect,
we would increase the num_trbs field on top of the previous stale value
thus incorrectly representing the number of TRBs used. Fix this by
resetting num_trbs field before giving back the request.

Fixes: 09fe1f8d7e2f ("usb: dwc3: gadget: track number of TRBs per request")
Signed-off-by: Elson Roy Serrao <[email protected]>
---
Changes in v2:
- Addressed Thinh's comment to reset num_trbs in dwc3_gadget_del_and_unmap_request
rather than calling skip_trbs.
- Modify the commit message to match the modification.

drivers/usb/dwc3/gadget.c | 1 +
1 file changed, 1 insertion(+)

diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 578804d..0ded919 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -198,6 +198,7 @@ static void dwc3_gadget_del_and_unmap_request(struct dwc3_ep *dep,
list_del(&req->list);
req->remaining = 0;
req->needs_extra_trb = false;
+ req->num_trbs = 0;

if (req->request.status == -EINPROGRESS)
req->request.status = status;
--
2.7.4



2023-06-01 22:29:50

by Thinh Nguyen

[permalink] [raw]
Subject: Re: [PATCH v2] usb: dwc3: gadget: Reset num TRBs before giving back the request

On Thu, Jun 01, 2023, Elson Roy Serrao wrote:
> Consider a scenario where cable disconnect happens when there is an active
> usb reqest queued to the UDC. As part of the disconnect we would issue an
> end transfer with no interrupt-on-completion before giving back this
> request. Since we are giving back the request without skipping TRBs the
> num_trbs field of dwc3_request still holds the stale value previously used.
> Function drivers re-use same request for a given bind-unbind session and
> hence their dwc3_request context gets preserved across cable
> disconnect/connect. When such a request gets re-queued after cable connect,
> we would increase the num_trbs field on top of the previous stale value
> thus incorrectly representing the number of TRBs used. Fix this by
> resetting num_trbs field before giving back the request.
>
> Fixes: 09fe1f8d7e2f ("usb: dwc3: gadget: track number of TRBs per request")
> Signed-off-by: Elson Roy Serrao <[email protected]>
> ---
> Changes in v2:
> - Addressed Thinh's comment to reset num_trbs in dwc3_gadget_del_and_unmap_request
> rather than calling skip_trbs.
> - Modify the commit message to match the modification.
>
> drivers/usb/dwc3/gadget.c | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
> index 578804d..0ded919 100644
> --- a/drivers/usb/dwc3/gadget.c
> +++ b/drivers/usb/dwc3/gadget.c
> @@ -198,6 +198,7 @@ static void dwc3_gadget_del_and_unmap_request(struct dwc3_ep *dep,
> list_del(&req->list);
> req->remaining = 0;
> req->needs_extra_trb = false;
> + req->num_trbs = 0;
>
> if (req->request.status == -EINPROGRESS)
> req->request.status = status;
> --
> 2.7.4
>

Acked-by: Thinh Nguyen <[email protected]>

Thanks,
Thinh