Hi,
This patch set aims to add NXP i.MX93 parallel display format configuration
DRM bridge driver support. i.MX93 mediamix blk-ctrl contains one
DISPLAY_MUX register which configures parallel display format by using
the "PARALLEL_DISP_FORMAT" field. i.MX93 LCDIF display controller's
parallel output connects with this piece of small logic to configure
parallel display format.
Patch 1/2 adds NXP i.MX93 parallel display format configuration subnode
in i.MX93 mediamix blk-ctrl dt-binding.
Patch 2/2 adds NXP i.MX93 parallel display format configuration DRM bridge
driver support.
v2->v3:
* Define i.MX93 parallel display format configuration subnode in
i.MX93 mediamix blk-ctrl dt-binding. (Rob)
v1->v2:
* Set *num_input_fmts to zero in case
imx93_pdfc_bridge_atomic_get_input_bus_fmts() returns NULL in patch 2/2.
* Replace .remove callback with .remove_new callback in
imx93_pdfc_bridge_driver in patch 2/2.
Liu Ying (2):
dt-bindings: soc: imx93-media-blk-ctrl: Add PDFC subnode to schema and
example
drm/bridge: imx: Add i.MX93 parallel display format configuration
support
.../soc/imx/fsl,imx93-media-blk-ctrl.yaml | 68 ++++++
drivers/gpu/drm/bridge/imx/Kconfig | 8 +
drivers/gpu/drm/bridge/imx/Makefile | 1 +
drivers/gpu/drm/bridge/imx/imx93-pdfc.c | 209 ++++++++++++++++++
4 files changed, 286 insertions(+)
create mode 100644 drivers/gpu/drm/bridge/imx/imx93-pdfc.c
--
2.37.1
NXP i.MX93 mediamix blk-ctrl contains one DISPLAY_MUX register which
configures parallel display format by using the "PARALLEL_DISP_FORMAT"
field. Add a DRM bridge driver to support the display format configuration.
Signed-off-by: Liu Ying <[email protected]>
---
v2->v3:
* No change.
v1->v2:
* Set *num_input_fmts to zero in case
imx93_pdfc_bridge_atomic_get_input_bus_fmts() returns NULL.
* Replace .remove callback with .remove_new callback in
imx93_pdfc_bridge_driver.
drivers/gpu/drm/bridge/imx/Kconfig | 8 +
drivers/gpu/drm/bridge/imx/Makefile | 1 +
drivers/gpu/drm/bridge/imx/imx93-pdfc.c | 209 ++++++++++++++++++++++++
3 files changed, 218 insertions(+)
create mode 100644 drivers/gpu/drm/bridge/imx/imx93-pdfc.c
diff --git a/drivers/gpu/drm/bridge/imx/Kconfig b/drivers/gpu/drm/bridge/imx/Kconfig
index 608f47f41bcd..adbd75a924d1 100644
--- a/drivers/gpu/drm/bridge/imx/Kconfig
+++ b/drivers/gpu/drm/bridge/imx/Kconfig
@@ -44,4 +44,12 @@ config DRM_IMX8QXP_PIXEL_LINK_TO_DPI
Choose this to enable pixel link to display pixel interface(PXL2DPI)
found in Freescale i.MX8qxp processor.
+config DRM_IMX93_PARALLEL_DISP_FMT_CONFIG
+ tristate "NXP i.MX93 parallel display format configuration"
+ depends on OF
+ select DRM_KMS_HELPER
+ help
+ Choose this to enable parallel display format configuration
+ found in NXP i.MX93 processor.
+
endif # ARCH_MXC || COMPILE_TEST
diff --git a/drivers/gpu/drm/bridge/imx/Makefile b/drivers/gpu/drm/bridge/imx/Makefile
index aa90ec8d5433..e88821733770 100644
--- a/drivers/gpu/drm/bridge/imx/Makefile
+++ b/drivers/gpu/drm/bridge/imx/Makefile
@@ -7,3 +7,4 @@ obj-$(CONFIG_DRM_IMX8QXP_LDB) += imx8qxp-ldb.o
obj-$(CONFIG_DRM_IMX8QXP_PIXEL_COMBINER) += imx8qxp-pixel-combiner.o
obj-$(CONFIG_DRM_IMX8QXP_PIXEL_LINK) += imx8qxp-pixel-link.o
obj-$(CONFIG_DRM_IMX8QXP_PIXEL_LINK_TO_DPI) += imx8qxp-pxl2dpi.o
+obj-$(CONFIG_DRM_IMX93_PARALLEL_DISP_FMT_CONFIG) += imx93-pdfc.o
diff --git a/drivers/gpu/drm/bridge/imx/imx93-pdfc.c b/drivers/gpu/drm/bridge/imx/imx93-pdfc.c
new file mode 100644
index 000000000000..61e01b503be5
--- /dev/null
+++ b/drivers/gpu/drm/bridge/imx/imx93-pdfc.c
@@ -0,0 +1,209 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+/*
+ * Copyright 2022,2023 NXP
+ */
+
+#include <linux/media-bus-format.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#include <drm/drm_atomic_state_helper.h>
+#include <drm/drm_bridge.h>
+#include <drm/drm_print.h>
+
+#define DRIVER_NAME "imx93_pdfc"
+
+#define DISPLAY_MUX 0x60
+#define PARALLEL_DISP_FORMAT 0x700
+
+enum imx93_pdfc_format {
+ RGB888_TO_RGB888 = 0x0,
+ RGB888_TO_RGB666 = 0x1 << 8,
+ RGB565_TO_RGB565 = 0x2 << 8,
+};
+
+struct imx93_pdfc {
+ struct drm_bridge bridge;
+ struct drm_bridge *next_bridge;
+ struct device *dev;
+ struct regmap *regmap;
+ u32 format;
+};
+
+static int imx93_pdfc_bridge_attach(struct drm_bridge *bridge,
+ enum drm_bridge_attach_flags flags)
+{
+ struct imx93_pdfc *pdfc = bridge->driver_private;
+
+ return drm_bridge_attach(bridge->encoder, pdfc->next_bridge, bridge, flags);
+}
+
+static void
+imx93_pdfc_bridge_atomic_enable(struct drm_bridge *bridge,
+ struct drm_bridge_state *old_bridge_state)
+{
+ struct imx93_pdfc *pdfc = bridge->driver_private;
+
+ regmap_update_bits(pdfc->regmap, DISPLAY_MUX, PARALLEL_DISP_FORMAT,
+ pdfc->format);
+}
+
+static const u32 imx93_pdfc_bus_output_fmts[] = {
+ MEDIA_BUS_FMT_RGB888_1X24,
+ MEDIA_BUS_FMT_RGB666_1X18,
+ MEDIA_BUS_FMT_RGB565_1X16,
+ MEDIA_BUS_FMT_FIXED
+};
+
+static bool imx93_pdfc_bus_output_fmt_supported(u32 fmt)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(imx93_pdfc_bus_output_fmts); i++) {
+ if (imx93_pdfc_bus_output_fmts[i] == fmt)
+ return true;
+ }
+
+ return false;
+}
+
+static u32 *
+imx93_pdfc_bridge_atomic_get_input_bus_fmts(struct drm_bridge *bridge,
+ struct drm_bridge_state *bridge_state,
+ struct drm_crtc_state *crtc_state,
+ struct drm_connector_state *conn_state,
+ u32 output_fmt,
+ unsigned int *num_input_fmts)
+{
+ u32 *input_fmts;
+
+ *num_input_fmts = 0;
+
+ if (!imx93_pdfc_bus_output_fmt_supported(output_fmt))
+ return NULL;
+
+ input_fmts = kmalloc(sizeof(*input_fmts), GFP_KERNEL);
+ if (!input_fmts)
+ return NULL;
+
+ switch (output_fmt) {
+ case MEDIA_BUS_FMT_RGB888_1X24:
+ case MEDIA_BUS_FMT_RGB565_1X16:
+ input_fmts[0] = output_fmt;
+ break;
+ case MEDIA_BUS_FMT_RGB666_1X18:
+ case MEDIA_BUS_FMT_FIXED:
+ input_fmts[0] = MEDIA_BUS_FMT_RGB888_1X24;
+ break;
+ }
+
+ *num_input_fmts = 1;
+
+ return input_fmts;
+}
+
+static int imx93_pdfc_bridge_atomic_check(struct drm_bridge *bridge,
+ struct drm_bridge_state *bridge_state,
+ struct drm_crtc_state *crtc_state,
+ struct drm_connector_state *conn_state)
+{
+ struct imx93_pdfc *pdfc = bridge->driver_private;
+
+ switch (bridge_state->output_bus_cfg.format) {
+ case MEDIA_BUS_FMT_RGB888_1X24:
+ pdfc->format = RGB888_TO_RGB888;
+ break;
+ case MEDIA_BUS_FMT_RGB666_1X18:
+ pdfc->format = RGB888_TO_RGB666;
+ break;
+ case MEDIA_BUS_FMT_RGB565_1X16:
+ pdfc->format = RGB565_TO_RGB565;
+ break;
+ default:
+ DRM_DEV_DEBUG_DRIVER(pdfc->dev, "Unsupported output bus format: 0x%x\n",
+ bridge_state->output_bus_cfg.format);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static const struct drm_bridge_funcs imx93_pdfc_bridge_funcs = {
+ .attach = imx93_pdfc_bridge_attach,
+ .atomic_enable = imx93_pdfc_bridge_atomic_enable,
+ .atomic_duplicate_state = drm_atomic_helper_bridge_duplicate_state,
+ .atomic_destroy_state = drm_atomic_helper_bridge_destroy_state,
+ .atomic_get_input_bus_fmts = imx93_pdfc_bridge_atomic_get_input_bus_fmts,
+ .atomic_check = imx93_pdfc_bridge_atomic_check,
+ .atomic_reset = drm_atomic_helper_bridge_reset,
+};
+
+static int imx93_pdfc_bridge_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct imx93_pdfc *pdfc;
+ int ret;
+
+ pdfc = devm_kzalloc(dev, sizeof(*pdfc), GFP_KERNEL);
+ if (!pdfc)
+ return -ENOMEM;
+
+ pdfc->regmap = syscon_node_to_regmap(dev->of_node->parent);
+ if (IS_ERR(pdfc->regmap)) {
+ ret = PTR_ERR(pdfc->regmap);
+ if (ret != -EPROBE_DEFER)
+ DRM_DEV_ERROR(dev, "failed to get regmap: %d\n", ret);
+ return ret;
+ }
+
+ pdfc->next_bridge = devm_drm_of_get_bridge(dev, dev->of_node, 1, 0);
+ if (IS_ERR(pdfc->next_bridge)) {
+ ret = PTR_ERR(pdfc->next_bridge);
+ if (ret != -EPROBE_DEFER)
+ DRM_DEV_ERROR(dev, "failed to get next bridge: %d\n", ret);
+ return ret;
+ }
+
+ platform_set_drvdata(pdev, pdfc);
+
+ pdfc->dev = dev;
+ pdfc->bridge.driver_private = pdfc;
+ pdfc->bridge.funcs = &imx93_pdfc_bridge_funcs;
+ pdfc->bridge.of_node = dev->of_node;
+
+ drm_bridge_add(&pdfc->bridge);
+
+ return 0;
+}
+
+static void imx93_pdfc_bridge_remove(struct platform_device *pdev)
+{
+ struct imx93_pdfc *pdfc = platform_get_drvdata(pdev);
+
+ drm_bridge_remove(&pdfc->bridge);
+}
+
+static const struct of_device_id imx93_pdfc_dt_ids[] = {
+ { .compatible = "nxp,imx93-pdfc", },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, imx93_pdfc_dt_ids);
+
+static struct platform_driver imx93_pdfc_bridge_driver = {
+ .probe = imx93_pdfc_bridge_probe,
+ .remove_new = imx93_pdfc_bridge_remove,
+ .driver = {
+ .of_match_table = imx93_pdfc_dt_ids,
+ .name = DRIVER_NAME,
+ },
+};
+module_platform_driver(imx93_pdfc_bridge_driver);
+
+MODULE_DESCRIPTION("NXP i.MX93 parallel display format configuration driver");
+MODULE_AUTHOR("Liu Ying <[email protected]>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:" DRIVER_NAME);
--
2.37.1
i.MX93 SoC mediamix blk-ctrl contains one DISPLAY_MUX register which
configures parallel display format by using the "PARALLEL_DISP_FORMAT"
field. Document the Parallel Display Format Configuration(PDFC) subnode
and add the subnode to example.
Signed-off-by: Liu Ying <[email protected]>
---
v2->v3:
* Newly introduced to replace the standalone dt-binding in v1 and v2. (Rob)
.../soc/imx/fsl,imx93-media-blk-ctrl.yaml | 68 +++++++++++++++++++
1 file changed, 68 insertions(+)
diff --git a/Documentation/devicetree/bindings/soc/imx/fsl,imx93-media-blk-ctrl.yaml b/Documentation/devicetree/bindings/soc/imx/fsl,imx93-media-blk-ctrl.yaml
index b3554e7f9e76..3f550c30d93d 100644
--- a/Documentation/devicetree/bindings/soc/imx/fsl,imx93-media-blk-ctrl.yaml
+++ b/Documentation/devicetree/bindings/soc/imx/fsl,imx93-media-blk-ctrl.yaml
@@ -24,6 +24,12 @@ properties:
reg:
maxItems: 1
+ '#address-cells':
+ const: 1
+
+ '#size-cells':
+ const: 1
+
'#power-domain-cells':
const: 1
@@ -46,9 +52,43 @@ properties:
- const: csi
- const: dsi
+ bridge@60:
+ type: object
+ additionalProperties: false
+
+ properties:
+ compatible:
+ const: nxp,imx93-pdfc
+
+ reg:
+ maxItems: 1
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: Input port node to receive pixel data.
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: Output port node to downstream pixel data receivers.
+
+ required:
+ - port@0
+ - port@1
+
+ required:
+ - compatible
+ - reg
+ - ports
+
required:
- compatible
- reg
+ - '#address-cells'
+ - '#size-cells'
- power-domains
- clocks
- clock-names
@@ -76,5 +116,33 @@ examples:
<&clk IMX93_CLK_MIPI_DSI_GATE>;
clock-names = "apb", "axi", "nic", "disp", "cam",
"pxp", "lcdif", "isi", "csi", "dsi";
+ #address-cells = <1>;
+ #size-cells = <1>;
#power-domain-cells = <1>;
+
+ bridge@60 {
+ compatible = "nxp,imx93-pdfc";
+ reg = <0x60 0x4>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ pdfc_from_lcdif: endpoint {
+ remote-endpoint = <&lcdif_to_pdfc>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ pdfc_to_panel: endpoint {
+ remote-endpoint = <&panel_from_pdfc>;
+ };
+ };
+ };
+ };
};
--
2.37.1
On Mon, Jun 05, 2023 at 02:22:16PM +0800, Liu Ying wrote:
> i.MX93 SoC mediamix blk-ctrl contains one DISPLAY_MUX register which
> configures parallel display format by using the "PARALLEL_DISP_FORMAT"
> field. Document the Parallel Display Format Configuration(PDFC) subnode
> and add the subnode to example.
The previous issues seem to be resolved & what you've got here looks
fine to me. Perhaps Krzysztof will disagree!
Reviewed-by: Conor Dooley <[email protected]>
Cheers,
Conor.
>
> Signed-off-by: Liu Ying <[email protected]>
> ---
> v2->v3:
> * Newly introduced to replace the standalone dt-binding in v1 and v2. (Rob)
>
> .../soc/imx/fsl,imx93-media-blk-ctrl.yaml | 68 +++++++++++++++++++
> 1 file changed, 68 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/soc/imx/fsl,imx93-media-blk-ctrl.yaml b/Documentation/devicetree/bindings/soc/imx/fsl,imx93-media-blk-ctrl.yaml
> index b3554e7f9e76..3f550c30d93d 100644
> --- a/Documentation/devicetree/bindings/soc/imx/fsl,imx93-media-blk-ctrl.yaml
> +++ b/Documentation/devicetree/bindings/soc/imx/fsl,imx93-media-blk-ctrl.yaml
> @@ -24,6 +24,12 @@ properties:
> reg:
> maxItems: 1
>
> + '#address-cells':
> + const: 1
> +
> + '#size-cells':
> + const: 1
> +
> '#power-domain-cells':
> const: 1
>
> @@ -46,9 +52,43 @@ properties:
> - const: csi
> - const: dsi
>
> + bridge@60:
> + type: object
> + additionalProperties: false
> +
> + properties:
> + compatible:
> + const: nxp,imx93-pdfc
> +
> + reg:
> + maxItems: 1
> +
> + ports:
> + $ref: /schemas/graph.yaml#/properties/ports
> +
> + properties:
> + port@0:
> + $ref: /schemas/graph.yaml#/properties/port
> + description: Input port node to receive pixel data.
> +
> + port@1:
> + $ref: /schemas/graph.yaml#/properties/port
> + description: Output port node to downstream pixel data receivers.
> +
> + required:
> + - port@0
> + - port@1
> +
> + required:
> + - compatible
> + - reg
> + - ports
> +
> required:
> - compatible
> - reg
> + - '#address-cells'
> + - '#size-cells'
> - power-domains
> - clocks
> - clock-names
> @@ -76,5 +116,33 @@ examples:
> <&clk IMX93_CLK_MIPI_DSI_GATE>;
> clock-names = "apb", "axi", "nic", "disp", "cam",
> "pxp", "lcdif", "isi", "csi", "dsi";
> + #address-cells = <1>;
> + #size-cells = <1>;
> #power-domain-cells = <1>;
> +
> + bridge@60 {
> + compatible = "nxp,imx93-pdfc";
> + reg = <0x60 0x4>;
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> +
> + pdfc_from_lcdif: endpoint {
> + remote-endpoint = <&lcdif_to_pdfc>;
> + };
> + };
> +
> + port@1 {
> + reg = <1>;
> +
> + pdfc_to_panel: endpoint {
> + remote-endpoint = <&panel_from_pdfc>;
> + };
> + };
> + };
> + };
> };
> --
> 2.37.1
>